Академический Документы
Профессиональный Документы
Культура Документы
ST Issue 7
Construction
Electrical details
Unit kW rating M0207 0.75 M2107 0.75 M2111 1.10 Drain
The pump suction pipework incorporates a resilient coupling, avoiding expansion stresses and facilitating pump removal. A 1" BSP bronze non-return valve is tted to the pump delivery. Installation requires only connection of the inlet, vent, overow and discharge pipework, and wiring between the customers supply isolator and the control gear enclosure. With the selector turned to 'Auto' the unit operates to match demand with no further attention. Note: It is recommended that a valve should be tted in the delivery pipework adjacent to the unit. Should the system head be less than the unit head, the valve may then be adjusted to increase the system head, reducing possible cavitation and noise.
Installation
Pump discharge
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specication without notice.
Copyright 2007
Dimensions / weights in mm and kg (Note: these gures are for guidance only and not to be used for design purposes)
Unit A M0207 1075 M2107 1075 M2111 1075 B 240 240 240 C 260 260 260 D 665 665 665 E 1005 1005 1005 F 215 235 235 G 320 320 320 H 150 150 150 J 25 25 25 K 380 380 380 L 200 200 200 M 220 220 220 N 175 175 175 P 220 220 220 Q Weight 700 95.0 700 95.0 700 95.0
P D N G F
Sizing charts
TI-P089-01 ST Issue 7