Академический Документы
Профессиональный Документы
Культура Документы
Some of these have descriptive subclasses. Classes have overlap, so some materials fit into more than one class.
LIME
Lime or quick lime is CaO It is obtained by heating of naturally occurring calcium carbonate (CaCO3) in the form of lime stone, chalk or marble to about 900 in the presence of limited supply of air (Calcination) CaCO3 + Heat CaO + CO2 This quicklime can be hydrated i.e combined with water CaO + H2O Ca (OH)2
SLAKED LIME
10
Types of Lime
Different types of limes are obtained depending on the chemical composition of the lime stone used in the manufacture of quick lime. Lime stone usually contains MgCO3, Al2O3, Fe2O3, SiO2 Fat Lime or high-calcium lime Hydraulic Lime Lean or poor lime
11
Types of Lime
Fat Lime or high-calcium lime
It is a non-hydraulic cementing material & setting occurs only by drying It is obtained by calcining limestone of high purity (>95% CaCO3) Contains more than 95% CaO and less than 2% oxides of Fe, Al, & Si Its a rapid slaking lime accompanied with the evolution of a large amount of heat & volume expansion
Used for whitewashing
12
Types of Lime
Hydraulic Lime
It is obtained from marls (lime stone containing 5-30% clay) Silica & alumina combine with CaO to give Ca- aluminate and Ca-silicate. Exhibits hydraulic properties and sets a hard mass on immersing in water. It slakes with difficulty, doesnt shrink or crack on setting. Hardens by hydrolysis Used as a substitute for cement particularly in new foundation for buildings
13
Types of Lime
Lean or poor lime
Contains more than 30% clay 70-80% CaO, >5% MgO, smaller proportions of Si & Alumina Slakes very slowly, forms a thin paste with water Sets or hardens very slowly Poor binding material with muddy white color Used for plaster finishing
14
MANUFACTURE OF LIME
Lime is manufactured by calcining lime stone in vertical kilns using coal or producer gas as fuel A kiln can be like a large cylindrical tower (20-40 m height, 2-3 m in diameter) lined with refractory bricks. Limestone is fed from the top and passes slowly down through the tower Flame of the burning fuel seeps (flow) from the sides decomposing the lime stone Air is supplied from the bottom of the tower-for cooling of hot lime & for combustion of the fuel
15
KILN
A kiln is a thermally insulated chamber, or oven, which is used for hardening, drying or burning of materials such as clay and other raw materials to form ceramics (including pottery, bricks etc)
KILN
KILN
POTTERY
16
PROPERTIES OF LIME
Slaking Plasticity Sand Carrying Capacity Setting & hardening Hardness Absorption of atmospheric CO2
17
PROPERTIES OF LIME
Slaking It is the reaction of CaO with water (3:1 ratio) which produces hydrated (slaked) lime (CaO.H2O). The reaction is highly exothermic evolving about 280 Kcal heat/kg of the lime and is accompanied by increase in volume (about 2 times) Important property for using lime as a binding material.
18
PROPERTIES OF LIME
Plasticity- Easy workability and ability to spread during
application as plaster
Lime containing MgO has good workability, pure lime is sticky Plasticity can be modified by incorporating sand
Sand Carrying Capacity Useful in the use of lime as a plaster, it reduce the shrinkage of lime on setting Sand carrying capacity of Ca-Lime is higher compared to dolomite lime [CaMg(CO3)2]
19
PROPERTIES OF LIME
Setting & hardening
It involves the transformation of lime mortar (sand & lime) into the hard CaCO3 which serves as a binding material and finishing material Brought about by dehydration (loss of water by evaporation) and carbonation (reaction with atmospheric CO2) of lime
Hydraulic limes undergo setting under water due to chemical decomposition of the complex silicates of Ca, Al into simpler compounds of Ca-Silicate, aluminate and hydroxide. Ca-Silicate, aluminate crystallizes in a hard mass in the interior while the water soluble Ca(OH)2 diffuses to the surface & interacts with CO2 to form hard CaCO3 20
PROPERTIES OF LIME
Hardness- resistance of lime mortar to abrasion
and impact on setting and hardening.
High Mg limes exhibit better hardness compared to high Ca limes
21