Академический Документы
Профессиональный Документы
Культура Документы
http://wiki.mikrotik.com/wiki/Dual_Setup_with_OSPF
Warning: In illustration above, both remote networks are from the same subnet. Such setup is not valid, each remote network must be from the different subnet. In configuration below on Router B 192.168.0.2/24 is replaced with 192.168.1.1/24
This set will cause the incoming traffic to use wlan1 on A and wlan2 on B. This also will use any available path to get to the other side (Failover with OSPF).
1 de 1
28/11/2011 09:44