Академический Документы
Профессиональный Документы
Культура Документы
MILITARY SPECIFICATION FL~GHT TESTING, ELECTRIC SYSTEM, PILOTED AII?CRA?W ~D : GUI!)Ell MISSIW, GENERAL REQUIREMEiJI,
1.
SCOPE
1.1 Scope. This specification covers the general requirements for flight testing of electric systems of piloted aircraft aridguided missiles.
1.2 Objective. The objective of this specification is to require sufficient flight tests to insure that a satisfactory electric system is installed i~ the aircraft or guided missile.
2.
APPLICABLE DOCUMENTS
* 2.1 The followinK document, of the issue in effect on date of invltatlOn for bids or request for proposal, forms a part of this specification to the extent Specliled herein: STANDARDS Military MIL-STD-831 Test Reports, Preparation of
(Copies of specifications, standards, drawings, and publications required by suppliers in connection with specific procu~ernent functions sh~uld be obtzinea from the procuring activity or as directed by t.?l-ontractinF officer.) c 3. REQUIREMENTS
* 3.1 Gene~al requirements. ?rior to, and throughout the test program, the equipment shall be inspected for loose and broker.part? , chafed i~sd]atiorl, aric general condition. Brush covers, Diast-air housing, or other cover ~lat~s shal: Deremoved during inspection. On rotatirlg maclhines tneconditicn of , the sii~ rings, conmutatcr, brushes, e:.cetera, S]-Jai] noted. Upon coT,plebe , tier.cf ~h.einspectiorj all pa?ts stall be reassembled ~ritheir pr~per TrJ:7cij+.ion, Loci.wirir,gshall be replacea where necessary.
Source: http://www.assistdocs.com -- Downloaded: 2007-07-18T15:22Z Check the source to verify that this is the current version before use.
3,4 LoaC banks, Loa6 benk.cnay be useti:C z<!nulate the power req~<~enen;s of actual load equtpnent prcvided the suDstitution will not adversely &fect the syste!ntes~ res~l?s.
Ilhese
tests
in t:heaircraft or guidei missile. c. Estaoliskthe cll~wecieaajust~.er.z on systen performance. d. Deternipe ??La:;he system,electric applicable nil:ta~ specificetior..
.2
-
Source: http://www.assistdocs.com -- Downloaded: 2007-07-18T15:22Z Check the source to verify that this is the current version before use.
MIL-F-25381A(USAF)
3.5.1.1 Electrical test items. The system shall be tested to determine the system characteristics or the effect OE the system of those items listed below, where applicable. If necessary to assure compliance with the requirements of this specification, or at the optiofiof the testing facility, the list shall be supplemented with additional items. a, Voltage
(1)
(2) (3) (4) (5) (6) (7) (/3)
L
Regulation - main bus or regulation point (steady state) Regulatiorl load bus or load (steady state) Phase unbalance Transient limits and stability Phase displacement Waveform (crest factor and harmonic content) Amplitude modulation Phase rotation Ripple Interruption (power transfer or fault clearing) Drift (during warmup)
Frequency (1) Regulation (steady state) (~) Iransientlimits and stabil~ty (3) Modulation
c.
Source: http://www.assistdocs.com -- Downloaded: 2007-07-18T15:22Z Check the source to verify that this is the current version before use.
MIL-F-25381A(USAF)
(k) Minimum d. Para.ileioperation (1) Real-load division (2) Reactive-load divisicn (3) Stability
(h) Synchronizing e, Manual controk (i) Range of ac,justments f ~rotectio~ (1) Undervoltage (2) overvoltage (:) Jnder?requency (4) (5)
--
(6) Generator, wire, and bus fa~lt (including interrupting capacity and coordination) (7) Reverse current !8) Reverse power
($1~ Miscellaneous control-system f~~it~ (iO) Coordination: i3, I,oads (1) Switching (2) Automatic transfer
Source: http://www.assistdocs.com -- Downloaded: 2007-07-18T15:22Z Check the source to verify that this is the current version before use.
!!IL-F-25381A(USAT)
L
3.5.2 Environmental tests. Sufficient flight tests shall be conducted on the electric syster!to uncover any adverse effects resulting from the operational environ!!er!ts the aircraft or missile. of weight, and termir.al !narkir.g 3.6 Dimensions. ?ertinent outside f!imensi.zns, and location shall be noted for major items of electrical equipment &nc co?r,pared with the applicable specification requirements. l!. QUALITY ASSURANCE PROVISIONS * * h,l Test procedure. When specified in the test procedure applicable to the particular be prepareti by the cor,tractor a,ndsubmitted activity prior to actual testing. The test
contract (see 6.2), a detailed a<rcraft or guided m~ssile sndl for apprcval ofthe procuring procedure shall cover all re-
Source: http://www.assistdocs.com -- Downloaded: 2007-07-18T15:22Z Check the source to verify that this is the current version before use.
MU-F-25381A(usAp)
b. Exact testing procedure followed snd reasons for any changes from the approved test procedure c. d. Detailed results of the testing - lria~, type,
~d
manufacturer of
teSt
instruments
e. Serial, type, and manufacturer of test components, including a.ppli cable specifications f.
~.
Appropriate photographs, sketches, diagr~s, and curves to explain test installations and results Recommendations and conclusions
h.
i. An appendix recording all pertinent changes made in the system (including circuitry and equipment) during testing, and reasons for each change. 5. PREPARATION FOR DELIVERY
6.1 Intended use. This specification is intended for use by contractors in conducting flight tests of aircraft or guided missile electric systems. * 6,2 Data. Data generated by this specification js not de?~verable unless i,ist (DL Form lh23) referencing ~peclf~ed on the Contract Data Requirement.s the appropriate data item description ir!the military departments Authorized Data List (ADL). The data produced by this specification is as follows: a. b, 6.3 Test procedure (see ~}.1)
lest report (see 4.3).
Definition
6.3.1 Electric system. The term electric system, as usea nerein, should be construed to mean power-generation equipment, batteries, conversion equipment, distribution circuits, and all associated control and protection equipment, Load equipment should be considered cJn2yZG the extent of its effect on , or the extent tc which it.is affe(~ted by tl)eoperatio~ of the system.
Source: http://www.assistdocs.com -- Downloaded: 2007-07-18T15:22Z Check the source to verify that this is the current version before use.
MIL-F-25381A(USAF)
6.4 Identification of changes. The margins of this specification are marked with w asterisk to indicate where changes (additions, modifications, corrections, deletions) from the previous iss~e were made. This was done as a whatsoever for any convenience only and the Government assu!mes no liabi!ity inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue.
Source: http://www.assistdocs.com -- Downloaded: 2007-07-18T15:22Z Check the source to verify that this is the current version before use.
Source: http://www.assistdocs.com -- Downloaded: 2007-07-18T15:22Z Check the source to verify that this is the current version before use.
FOLD
..
OFFICIAL
PENALTY FOR
--
FOLD
..
Source: http://www.assistdocs.com -- Downloaded: 2007-07-18T15:22Z Check the source to verify that this is the current version before use.
STANDARDIZATION
[N STRUCTIONS
ment DoD are of Invite-d of be of suitable to the use contractors, dGtIVLLI m
DOCUMENT
IMPROVEMENT
sol IcIt m]nlmurrl hcmcficltil delai vendnrs J. i+r~ ncl
PROPOSAL
ur
I
side, s[aple au:hor12at:, AI I-L-F, ant 10 [om
OMEI
The purpose of [h!s products aI reasrrnahlc govemmcnt submit rt, (erenced improving to comments CUI111;IL4J:L thts preparing ANO TITLE activities, (o the bdbml[tc
commcn!s wh}ch will olhcr~ise who are r prospecl)ve :7.~!j ~ttdch reverse
WII! he]{ a,-hievc prol. urt, enhance us{ U( the documen: suppliers ,n comer. Jn t,, prrtlni,n! and
pldc.
manuf~clllrers (.)rn
of ,., ..,..
!hr an,!
Fold cmIInes on
< ..r,s!~lul, < untr.iclu~l ddd)!l~,niil
rvqu>r,::,cr.?. paper>,
data bulb
addressed IDENTIFIER
AAt E OF
ORGANIZATION
AND
ADDRESS
CONTRACT
NUMBER
PRoCURED
uNDER
A .SSJPC594TQ ACT
DIRECT OR
GOVERNMENT
CO N- RACT
ANY
PART
OF
THE
DOCUMENT
CREATED
PROBLEMS
REQUIRED
Interpretation
IN PROCUREMENT
13
REC0Mh4ENDA710N5
FOu
CO RW*.
CTf
NG
7WE
DEFICIENCIES
CO MM EN TSON
ANY
OOCUMENT
REQUIREMENT
CONSIDERED
TOO
RIGID
IS THE ~
DOCUMENT Yss ~
REST NO
REMARKS
JBMITTED
BY (Prfnfed
O, Iyped
n~e
md
qddreas
- Opt fonal)
TEL
EpHONE
NO
OATE
-.
--..
Source: http://www.assistdocs.com -- Downloaded: 2007-07-18T15:22Z Check the source to verify that this is the current version before use.