Академический Документы
Профессиональный Документы
Культура Документы
Downtilt
1710 2200 X 65 0 10
1710 2200 X 65 0 10
742 236
17102200 1850 1990 MHz 4 x 17.8 dBi 1920 2200 MHz 4 x 18 dBi +45, 45; +45, 45 +45, 45; +45, 45 +45, 45; +45, 45
7
10 10
dB
3 0
3 0
Horizontal Pattern
dB
1710 2200 45
17102200 45
7-16
7-16
7-16
7-16
Mechanical specifications
10 10
Subject to alteration.
dB
3 0
dB
3 0
4 x 7-16 female Bottom 2 x, Position bottom continuously adjustable 14.6 kg Frontal: Lateral: Rearside: 650 N (at 150 km/h) 100 N (at 150 km/h) 700 N (at 150 km/h) 200 km/h 1574 x 360 x 130 mm 1319 / 323 / 71 mm
Horizontal Pattern
936.3540
Packing size
dB
dB
Height/width/depth
Horizontal Pattern
Internet: www.kathrein.de
Page 1 of 4
KATHREIN-Werke KG . Anton-Kathrein-Strae 1 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-973
For downtilt mounting use the clamps for an appropriate mast diameter together with the downtilt kit. Wall mounting: No additional mounting kit needed. Material: Reflector screen: Aluminum. Radiator: Tin-plated zinc. Flat fiberglass radome: The max. radome depth is only 71 mm. Fiberglass material guarantees optimum performance with regards to stability, stiffness, UV resistance and painting. The colour of the radome is grey. All screws and nuts: Stainless steel. The metal parts of the antenna including the mounting kit and the inner conductors are DC grounded.
Grounding:
Environmental conditions: Kathrein cellular antennas are designed to operate under the environmental conditions as described in ETS 300 019-1-4 class 4.1 E. The antennas exceed this standard with regard to the following items: Low temperature: 55 C High temperature (dry): +60 C Ice protection: Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions. Environmental tests: Kathrein antennas have passed environmental tests as recommended in ETS 300 019-2-4. The homogenous design of Kathreins antenna families use identical modules and materials. Extensive tests have been performed on typical samples and modules. Adjustment mechanism with integrated scale
Page 2 of 4
742 236
KATHREIN-Werke KG . Anton-Kathrein-Strae 1 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-973
2 2
Adjustment wheel with twist-lock function. Downtilt spindle with integrated scale.
Thread for fixing the protective cap or the RCU (Remote Control Unit). Gearwheel for RCU power drive.
To set the downtilt angle exactly, you must look horizontally at the scale. The lower edge of the gearwheel must be used for alignment.
0 max.
max. 0
For a description of RCU installation please refer to the respective data sheet.
Internet: www.kathrein.de
742 236
Page 3 of 4
KATHREIN-Werke KG . Anton-Kathrein-Strae 1 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-973
General Instructions for Feederline Installation on Panels with four Connectors arranged on two Levels
Please note: In order not to damage the interfaces, please make sure that only the right tools are used. Tighten the feederline connector interfaces solely by using a common torque-wrench with a suitable wrench width.
There are four interfaces for feeding the antenna located at the bottom.
The connectors are mounted at two levels in order to facilitate feederline installation.
Start with the rearside located interface no. 1. Place the connector carefully and fix the nut using a torque-wrench (according to the manufacturers guidelines). The further sequence for the installation is: feederlines no. 2, 3, 4.
After feederline installation the optional remote control units (RCU) can be mounted if required.
For a full description of RCU installation please refer to the respective data sheet.
Please note: Additional weather sealing of correctly installed feederline connector interfaces is not required, nor is it recommended by the connector manufacturers.
Page 4 of 4 742 236
Internet: www.kathrein.de
KATHREIN-Werke KG . Anton-Kathrein-Strae 1 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-973
936.3540
Subject to alteration.