Академический Документы
Профессиональный Документы
Культура Документы
Technical Bulletin
Engineering Data
Flow Data ........................................................................................................................................................... 11
Conversion Data ................................................................................................................................................ 12
M&J Valve
19191 Hempstead Highway
Houston, TX 77065
Telephone: 281-469-0550
Fax: 281-894-1332
E-Mail: mandjvalve@processequipment.spx.com
Web Site: www.mandjvalve.com
SPX Process Equipment reserves the right to incorporate our latest design and material changes without notice or obligation.
Design features, materials of construction and dimensional data, as described in this bulletin, are provided for your information
only and should not be relied upon unless confirmed in writing. Certified drawings are available upon request.
MJ-1822
GENERAL DESCRIPTION
The M&J Swing Check Valve design is based on many years of field use, engineering expertise and the latest
state-of-the-art technology. This combined with M&J Valves history of customer service, after the sale
support and comprehensive quality assurance program, ensures a product meeting the highest standards.
The M&J Swing Check Valve is produced in an environment conforming to API-Q1 and ISO-9001 and designed, manufactured, tested and certified to one or more of the following: API-6D, ANSI B16.5, ANSI B16.10,
ANSI B16.34, ANSI B2.1, API-598, API-1104, BS 2080, BS 5146, BS 6755.
The Swing Check Valve is a one-piece body, top entry design for reliable operation and extended seat seal life.
Top entry construction allows field service and in-line maintenance if necessary.
All major components of the check valve are normally made from cast and wrought forms, allowing the use of
a variety of widely accepted materials.
M&J Swing Check Valves are full bore. The full bore to API-6D assures unrestricted flow and allows pigging
and hot tapping.
MJ-1822
DESIGN FEATURES
The M&J Swing Check Valve is a robust design
which incorporates all of the desirable features
proven to provide long life and trouble free
operation. Backflow prevention is assured by the
free swinging clapper design which responds to the
changes in flow and provides positive closure prior
to the reversal of flow. The valve can be installed in
horizontal or vertical flow-up applications without
external closure assistance, i.e. counterweights.
Clapper Seals the clapper/arm design of the
Swing Check Valve provides positive alignment
between the clapper face and the seat face in the
body. Primary sealing is assured by the metal-tometal contact between these faces. Secondary
sealing is provided by a non-metallic insert in the
clapper face (fig 1).
Figure 2
Figure 1
4
MJ-1822
Description of Test
Dye Penetrant
Magnetic Particles
(wet or dry)
Radiography
Ultrasonic
Hydrostatic and
Pneumatic
Stem Torque
Visual and
Dimensional
Material Hardness
Applicable Standards
ASME V - Art 6 and 21
ASTM E165
ANSI B16.34 - Annex D
ASME V - Art 7 and 25
ASTM E709
ANSI B16.34 - Annex C
API - 1104
ASME V - Art 2 and 22
ASME VIII - Div 1
ANSI B16.34 - Annex B
ASTM E142, E94, E446, E186, E280
ASME V - Art 4 and 23
ASTM VII - Div 1
ASTM A388
API - 598, API - 6D
BS - 5146 and 6755
MSS-SP61
Customers Specifications
API - 6D
Customers Specifications
BS 2080
ANSI B16.34, B16.5, B16.10
MSS-SP44 and SP55
NACE MR - 01-75 (Latest edition)
Other non-destructive or destructive testing may be conducted to meet customer requirements and/or specifications.
Please contact your local M&J Valve representative for additional information.
MJ-1822
Standard
x
x
API-6D/Q1
ISO 9001
x
x
x
x
Lock-open
Transition Pieces (Pups)
Hydraulic Dampener
Counter Balance
Body Plug
x
x
x
x
x
Subsea
Removable Seat
API Monogram
Hydro Shell
Hydro-Seat
x
x
x
x
x
Air Seat
Operational Torque Test
Extended Hydro Test
Visual (API 6D)
Ultrasonic
NDE:
Dye Penetrant
Magnetic Particle
Radiography
Hydrotest Reports
Material Test Reports (MTRS)
Hydrotest Charts
Documentation/
NDE Reports
Certification:
Nace
Certificate of Compliance
Operational Test Reports
11-20
21-30
31-40
Arm
Clapper
Shaft
O-Rings, Set
Body Drain
API-6D Test:
When
Specified
x
x
x
x
x
x
x
x
x
x
x
x
SERVICE
Every product sold by M&J Valve is supported by
our full techincal staff. This staff is available to
provide you with technical advice, backup documentation, spare parts and repair services, either in
the plant or in the field. Our well-trained and experienced field service staff stands ready to support
you and our products around the world.
WARRANTY
The Company warrants all equipment manufactured by it to be free from defects in workmanship
and material provided that such equipment was
properly selected for the service intended, properly
installed, and not misused. Equipment which is
returned transportation prepaid to the Companys
originating factory within 12 months after installation, or 18 months from delivery of equipment, for
destination outside the United States, and if found
by the Companys inspection to be defective in
workmanship or material will be repaired or replaced, at the Companys option, free of charge and
return-shipped lowest cost transportation prepaid.
WITH EXCEPTION OF THE WARRANTY SET FORTH
ABOVE, THE COMPANY MAKES NO EXPRESS OR
IMPLIED WARRANTIES, NO WARRANTY OF MERCHANTABILITY, NO WARRANTY OF FITNESS FOR
PURPOSE, AND NO OTHER WARRANTIES WHICH
EXTEND BEYOND THE DESCRIPTION ON THE FACE
HEREOF.
MJ-1822
600
RF
654
NSV
Body, Trim & Seal code Definitions
6
Figure #
End Connection
6=Top Entry
Check Valve
Pressure Class
1
2
4
5
6
7
8
Size
Trim
= Class 150
= Class 300
= Class 400
= Class 600
= Class 900
= Class 1500
= Class 2500
4
5
6
7
8
= RF
= RJ
= WE
= RF x WE
= RJ x WE
N
Standard Carbon
Steel
Carbon Steel/ NACE
S
Full Stainless
L
LN
Low Temp. -50 F Low Temp. -50 F/NACE
B1
Body
B2
Cover
ASTM A36
ASTM A36
ASTM A105
ASTM A105
AISI 1018/1020
AISI 1018/1020
Stud
ASTM A193 B7
ASTM A320 L7
B5
Nut
ASTM A194 2H
B6
Vent Plug
ASTM A105
ASTM A105
B3
B4
Trim
Standard Carbon
Steel
O
316L Overlay
S
Full Stainless
H
Hardfaced
E
Electroless Nickel
T1
Arm
Shaft (Standard)
Shaft (Extended)
T3
Clapper
T4
Nut (Clapper)
ASTM A194 2M
ASTM A194 2M
T5
Pin
316 SS
316 SS
316 SS
316 SS
316 SS
T6
Spacer
18-8 SS
18-8 SS
18-8 SS
18-8 SS
18-8 SS
Integral
Renewable
AISI 1018/1020
316 SS
316 SS
316 SS
T2
T7
T8
Seat
Key (Extended Shaft)
316 SS
Item
Trim
Standard
S1
Clapper Seal
Nitrile
Viton
S2
Cover Seal
Nitrile
Viton
N
Neoprene
D
Danseal
MR
Metal-to-Metal
Neoprene
Danseal
Metal-to-Metal
Neoprene
Danseal
RTJ Gasket
S3
Nitrile
Viton
Neoprene
Danseal
Graphoil
S4
Nitrile
Viton
Neoprene
Danseal
Graphoil
S5
Nitrile
Viton
Neoprene
Danseal
Graphoil
The materials listed above are not to be considered a limit to the availability of other materials/trim. Other materials/trims can be furnished on application.
MJ-1822
*Optional
6 and larger
4 and smaller
MJ-1822
10
12
16
20
24
A
In(mm)
ANSI
RF
150
300
600
900
150
300
600
900
150
300
600
900
150
300
600
900
150
300
600
900
150
300
600
900
150
300
600
900
150
300
600
900
150
300
600
900
150
300
600
900
8.00
10.50
11.50
14.50
9.50
12.50
15.00
15.00
11.50
14.00
17.00
18.00
14.00
17.50
22.00
24.00
19.50
21.00
26.00
29.00
24.50
24.50
31.00
33.00
27.50
28.00
33.00
38.00
34.00
34.00
39.00
44.50
38.50
40.00
47.00
52.00
51.00
53.00
55.00
61.00
(203)
(267)
(292)
(368)
(241)
(318)
(381)
(381)
(292)
(356)
(432)
(457)
(356)
(445)
(559)
(610)
(495)
(533)
(660)
(737)
(622)
(622)
(787)
(838)
(699)
(711)
(838)
(965)
(864)
(864)
(991)
(1130)
(978)
(1016)
(1194)
(1321)
(1295)
(1346)
(1397)
(1549)
WE
8.00
10.50
11.50
14.50
9.50
12.50
15.00
15.00
11.50
14.00
17.00
18.00
14.00
17.50
22.00
24.00
19.50
21.00
26.00
29.00
24.50
24.50
31.00
33.00
27.50
28.00
33.00
38.00
34.00
34.00
39.00
44.50
38.50
40.00
47.00
52.00
51.00
53.00
55.00
61.00
(203)
(267)
(292)
(368)
(241)
(318)
(381)
(381)
(292)
(356)
(432)
(457)
(356)
(445)
(559)
(610)
(495)
(533)
(660)
(737)
(622)
(622)
(787)
(838)
(699)
(711)
(838)
(965)
(864)
(864)
(991)
(1130)
(978)
(1016)
(1194)
(1321)
(1295)
(1346)
(1397)
(1549)
RTJ
8.50
11.13
11.63
14.63
10.00
13.13
14.13
15.13
12.00
14.63
17.13
18.13
14.50
18.13
22.13
24.13
20.00
21.63
26.13
29.13
25.00
25.13
31.13
33.13
28.00
28.63
33.13
38.13
34.50
34.63
39.13
44.88
39.00
40.75
47.25
52.50
51.50
53.88
55.38
61.75
(216)
(283)
(295)
(372)
(254)
(334)
(359)
(384)
(305)
(372)
(435)
(461)
(368)
(461)
(562)
(613)
(508)
(549)
(664)
(740)
(635)
(638)
(791)
(841)
(711)
(727)
(841)
(968)
(876)
(879)
(994)
(1140)
(991)
(1035)
(1200)
(1334)
(1308)
(1368)
(1407)
(1568)
MJ-1822
B
In(mm)
3.00
3.25
3.25
4.25
3.75
4.13
4.13
4.75
4.50
5.00
5.38
5.75
5.75
6.50
7.06
7.69
7.19
7.94
8.69
9.69
9.19
9.19
10.25
11.19
10.75
10.75
11.13
12.19
13.00
13.38
13.75
14.06
15.75
15.75
16.50
17.38
18.50
18.50
19.00
19.00
(76)
(83)
(83)
(108)
(95)
(105)
(105)
(121)
(114)
(127)
(137)
(146)
(146)
(165)
(179)
(195)
(183)
(202)
(221)
(246)
(233)
(233)
(260)
(284)
(273)
(273)
(283)
(310)
(330)
(340)
(349)
(357)
(400)
(400)
(419)
(441)
(470)
(470)
(483)
(483)
C
In(mm)
4.75
4.75
4.75
7.25
5.31
5.31
5.31
7.44
5.88
5.88
6.13
8.19
7.94
8.44
8.69
9.31
9.56
10.06
10.56
11.06
12.44
12.82
13.56
14.06
13.50
14.00
14.75
15.56
18.69
19.44
20.44
21.19
22.00
22.88
24.00
25.25
26.88
27.88
29.50
30.50
(121)
(121)
(121)
(184)
(135)
(135)
(135)
(189)
(149)
(149)
(156)
(208)
(202)
(214)
(221)
(236)
(243)
(256)
(268)
(281)
(316)
(326)
(344)
(357)
(343)
(356)
(375)
(395)
(475)
(494)
(519)
(538)
(559)
(581)
(610)
(641)
(683)
(708)
(743)
(775)
Wt.
(lbs)
35
42
45
150
70
70
75
180
80
120
140
250
160
220
360
420
300
340
600
760
630
790
970
1160
970
1100
1450
1890
1680
2210
2520
2840
2100
2580
4000
4200
3530
4200
5520
8420
9
Flanges
Sizes 2 through 24 ANSI B16.5
Sizes 26 through 36MSS-SP-44
Weld Ends
Per ANSI B31.4
Face to Face and End to End
Dimensions conform to API-6D,
Table 4.4
Full Bore per API-6D
Table 4.0
4 and Smaller
6 and Larger
10
MJ-1822
Q= Cv
P
G
For Gases:
2
Q= 963 Cv
Q
Cv
P1
P2
T
G
P1 -P2
GT
SIZE
Cv
2
3
4
6
8
10
12
14
16
18
20
24
106
238
424
954
1696
2650
3816
4652
6163
7885
9819
14324
Velocity in Pipes
1 Barrel
1 Barrel
1 Gallon (US)
1 Gallon (MP)
1 Gallon (US)
1 Cubic Foot
1 Cubic Foot
1 Cubic Meter
=
=
=
=
=
=
=
=
Rates of Flow
Gallon per minute =0.02918 x Barrels/day
Gallons per day =1,008 x Barrels/hour
Contents of Pipelines
Gallons (US) per 1000 ft =42 (US) gallons-5.6145 cubic feet=702 cubic inches
Barrels per 1000 ft
=0.1590 cubic meters=159 liters
Gallons (US) per mile =0.1337 cubic foot=231 cubic inches=0.833 gallons (IMP)
Barrels per mile
=1.20 gallons (US)=0.1604 cubic inches=277.2 cubic inches
Cubic meter per Kilometer =0.0007854 x (mmID) 2
MJ-1822
11
By
To Obtain
Multiply
By
To Obtain
Atmosheres
Barrels-Oil
Bar
Cubic Feet
Cubic Feet/minute
Cubic Feet/second
Cubic Inches
Cubic Meter
Feet of Water
Foot-Pound
Feet/minute
Feet/second
Gallons
Gallons, Imperial
Gallon, U.S.
Gallons water
Gallons/min
29.92
33.90
1.033
14.70
42
14.504
100,000
1728
0.02832
7.48052
0.1247
0.646317
448.831
5.787 x 10 - 4
1.639 x 10 -5
2.1413 x 10 -5
4.329 x 10 -3
35.31
61,023
264.2
103
1.02950
0.8826
0.0305
62.43
0.4335
1.356
0.01667
0.01829
0.3048
0.01136
1.097
18.29
0.6818
0.1337
231
3.78 x 10 -3
1.20095
0.83267
8.3453
2.228 x 10-3
8.0208
1.459
Inches of Mercury
Feet of Water
Kgs./sq. cm.
Lbs./sq. inch
Gallons-oil
Lbs./sq. inch
Pascal
Cubic Inches
Cubic Meters
Gallons
Gallons/second
Million Gallons/day
Gallons/minute
Cubic Feet
Cubic Meters
Cubic Yards
Gallons
Cubic Feet
Cubic Inches
Gallons
Liters
Atmosphere
Inches of Mercury
Kgs./sq.cm.
Lbs./sq.ft.
Lbs./sq. inch
Newton-Meter
Feet/sec.
Kilometer/hour
Meters/minute
Miles/hour
Kilometers/hour
Meters/minute
Miles/hour
Cubic feet
Cubic inches
Cubic meters
U.S. Gallons
Imperial Gallons
Pounds of water
Cubic feet/second
Cu. ft./hour
Barrels/hour
Inches
Inch-Pound
Inches of Mercury
Inches of Water
Kilograms
Meters
Meters/minute
Meters/second
MegaPascal (MPa)
Newton
Newton-Meter
Pounds/sq. foot
Pounds/sq. inch
25.4
.113
0.03342
1.133
0.0345
70.73
0.4912
0.002458
0.07355
0.0025
5.202
0.03613
980,665
2,205
3.2181
0.05468
Millimeters
Newton-Meter
Atmosphere
Feet of water
Kgs./sq.ft.
Lbs./sq. ft.
Lbs. sq. inch
Atmosphere
Inches of mercury
Kgs./sq.cm.
Lbs./sq.foot
Lbs./sq. inch
Dynes
Lbs.
Feet
Inches
Kilometers
Millimeters
Feet/minute
Feet/second
Kilometers/hour
Miles/hour
Feet/minute
Feet/second
Kilometers/hour
Kilometers/minute
Lbs./sq. inch
Pound (Force)
Kg (Force)
Foot-Pound
Inch-Pound
Feet of water
Kgs./sq. meter
Pounds/sq. inch
Atmosphere
Feet of water
Inches of mercury
Kgs./sq. meter
Abs. temp. (K)
Temp. (F)
Abs. temp. (R)
Temp. (C)
39.97
10 -3
3.281
0.05468
0.06
0.003728
196.8
3.281
3.6
0.06
145.038
0.225
0.102
0.737
8.85
0.01602
4.883
6.945 x 10 -3
0.06804
2.307
2.036
3.1
1
1.8
1
5/9
For more information about our worldwide locations, approvals, certifications, and local representatives, please visit our web site.
Web Site: www.spxprocessequipment.com
E-Mail: mandjvalve@processequipment.spx.com
19191 Hempstead Highway, Houston, TX 77065 Telephone: (281) 469-0550, Outside Texas (800) 231-3690 Fax (281) 894-1332
SPX Process Equipment reserves the right to incorporate our latest design and material changes without notice or obligation.
Design features, materials of construction and dimensional data, as described in this bulletin, are provided for your information only and should not be relied upon unless
confirmed in writing. Certified drawings are available upon request.
2005 SPX Process Equipment
Issued: 6-06 MJ-1822