Академический Документы
Профессиональный Документы
Культура Документы
Content Overview: PowerShell Introduction Install Steps and First Commands Creating PowerShell Scripts Running PowerShell Scripts from DOS Command Prompts or Task Scheduler
1.0 Introduction
This document is a beginners guide to configuring and using PowerShell to perform administration tasks within a VMware Infrastructure. This assumes little or no experience with PowerShell and will go through the steps of downloading, configuring and using it to perform simple tasks. It is meant as a basic introduction to show the steps required to get started.
command prompt is similar to the traditional DOS Command prompt but is used specifically to execute PowerShell commands. It is found in Start / Programs / Windows PowerShell or similar depending on your OS.
Note: You cannot execute native PowerShell commands by simply typing them into a DOS Command Prompt
Cmdlets are chunks of PowerShell code that perform certain predefined actions. VMware has written their own Cmdlets which can be used to manage the Virtual Infrastructure. An example of a VMware Cmdlet is Start-VM <VMname> Before the above VMware Cmdlets can be run there are 3 things that need to happen. 1. 2. 3. PowerShell needs to be installed The VMware PowerShell add-ins need to be installed A connection must be made to the vCenter server or ESX Host
The next section goes through the steps of installing and running VMware PowerShell commands.
Once installed there are several native PowerShell commands, called Cmdlets, that can be executed via the PowerShell command prompt. The PowerShell
information@xtravirt.com
www.xtravirt.com 2009 |
Connect-VIServer -Server <vCenterIPAddress> -User <adminUsername> -Password <password> Note: The command above is entered as one line
Browse to the following Microsoft link and install PowerShell for the correct OS being used: http://www. microsoft.com/windowsserver2003/technologies/ management/powershell/download.mspx 2. Enable PowerShell Script Execution
Note: As a security precaution remote PowerShell scripts cannot be executed unless you enable it. This is required before VMware commands can be executed.
If Certificates havent been configured then there will be a warning as seen below. This can be ignored.
Open up the Windows PowerShell command prompt and type set-ExecutionPolicy RemoteSigned
5.
3.
Install the PowerCLI onto your local PC. This contains the VMware software management objects and Cmdlets Download from here: www.vmware.com/go/powercli 4. Connect to vCenter or ESX
Now Open the VMware (not Windows) PowerShell Command Prompt and type the following:
information@xtravirt.com
www.xtravirt.com 2009 |
Heres just a tiny sample of the example commands showing what can be done:
PowerShell Command
Start-VM <guestVMname> ShutDown-VMGuest <guestVMname> Get-DRSRule Cluster <ClusterName>
Action Power on the VM specified Shuts down Guest OS Displays DRS rules for specified cluster
C:\WINDOWS\system32\ windowspowershell\v1.0\powershell. exe -PSConsoleFile C:\Program Files\VMware\Infrastructure\VSphere PowerCLI\vim.psc1 -NoExit Command Note: The command above is entered as one line
Dont forget you still must connect to a vCenter Server or ESX Host so the first command might look like this:
C:\WINDOWS\system32\ windowspowershell\v1.0\powershell. exe -PSConsoleFile C:\Program Files\VMware\Infrastructure\ VSphere PowerCLI\vim.psc1 -NoExit Command Connect-VIServer -Server <vCenterIPAddress> -User <adminUsername> -Password <password> Note: The command above is entered as one line
6.
Once finished, it is good practice to disconnect. To do this type the following command:
Disconnect-VIServer
The above line is what would be typed into Windows Task Scheduler.
Note: These commands assume a vSphere PowerCLI install with default directory locations.
5.0 Running PowerShell Scripts from DOS Command Prompts or Task Scheduler
Now that you know how to run PowerShell commands to control your VMware Infrastructure you might be wondering how to schedule these commands using Task Scheduler which only recognises DOS commands or batch files. This is actually quite simple. PowerShell commands can in fact be executed from a DOS Command prompt by adding the following prefix to the command so Windows knows to call PowerShell and reference the VMware add-ins to execute it. At a DOS Command prompt type the following and then add any VMware PowerShell CmdLet command:
6.0 Summary
This article introduces the very basics of VMware PowerShell commands for someone who hasnt used these before. There is a wealth of information on PowerShell scripting on the VMware and Microsoft web sites along with a number of sample scripts. Most things that can be done via the VI Client can also be scripted using PowerShell making this a powerful tool for the administrator.
This concludes the white paper. References and Useful links are located on the following page.
information@xtravirt.com
www.xtravirt.com 2009 |
About Xtravirt
Xtravirt is a knowledge-based company that delivers its expertise in virtualization online and in person. We have developed a reputation for astute leadership and expertise through our work with an impressive array of organisations. It is this real-world experience that drives our ability to provide independent, current and free advice online. We work with organisations whose IT staff are frustrated with how hard it is to find detailed information and skills around virtualization. We help our clients deliver the true benefits of virtualization, resulting in cost and time savings. For more information contact: Dorset House, Regent Park 297 Kingston Road, Leatherhead Surrey KT22 7PL t +44 (0) 1372 824 296 f +44 (0) 1372 824 576 e information@xtravirt.com w www.xtravirt.com
Copyright 2009 Xtravirt Ltd. All rights reserved. The information contained herein is subject to change without notice. Xtravirt Ltd shall not be liable for technical or editorial errors or omissions contained herein. Xtravirt and the Xtravirt logo are registered trademarks of Xtravirt Ltd. The names of actual companies and products mentioned herein may be the trademarks or registered trademarks of their respective owners. This document remains the property of Xtravirt Ltd. Contents may not be copied, reproduced or modified without written consent from Xtravirt Ltd.
References
1. Microsoft PowerShell Download, http://www.microsoft.com/ windowsserver2003/technologies/management/powershell/ download.mspx VMware PowerShell Components Download and Documentation, www.vmware.com/go/powercli VMware PowerShell Components Install Guide, http://www. vmware.com/support/developer/windowstoolkit/wintk40/ doc/viwin_install.pdf
Useful Links
1. vSphere PowerCLI Administration Guide, http://www.vmware. com/support/developer/windowstoolkit/wintk40/doc/ viwin_admg.pdf vSphere PowerCLI Documentation Guide, http://www. vmware.com/support/developer/windowstoolkit/
2. 3.
2.
Tags
VMware, PowerShell, Scripting, PowerCLI, vCenter, ESX, ESXi
information@xtravirt.com
www.xtravirt.com 2009 |