Вы находитесь на странице: 1из 22

Wood Joining & Glues

Brand

Type

Wood Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No Yes Yes Yes Yes Yes Yes Yes Yes

Metal No No No No No No No Yes No No No No Yes Yes Yes Yes Yes No Yes Yes Yes No No No Yes Yes Yes Yes Yes Yes Yes

Cloth/ Plastics leather Rubber Ceramics Craft No No No No No No No Yes No No No No Yes Yes No Test No No Yes Some PVC No No No Yes Yes Yes Yes Yes Yes Yes Yes No No Yes Yes Yes No No No No Yes No No No No No Yes Yes No No No No Yes Yes Yes Yes No No No No No No No No Yes No No No No No Some No No Some No Yes No No No No No Yes Yes Yes Yes No No No No No No No No Yes No No No No Yes No No No Yes Yes No No Yes No No No Yes Yes Yes Yes No Yes Yes Yes Yes Yes Yes Yes Yes No No No No Yes No No No No No Yes Yes Yes No No No Yes Yes Yes Yes No No No

Building No No No No No No No Yes No No No No No Yes Yes Yes Yes Yes No Yes No No No Yes Yes Yes Yes Yes No Yes Yes

Inerior/ Exterior Interior Interior/Exterior Interior Interior/Exterior Interior/Exterior Interior Interior Interior/Exterior Interior Interior/Exterior Interior Interior/Exterior Interior Interior/Exterior Interior/Exterior Interior/Exterior Interior/Exterior Interior Interior/Exterior Interior/Exterior Interior/Exterior Interior/Exterior Exterior/Marine Interior/Exterior Interior/Exterior Interior/Exterior Interior/Exterior Interior/Exterior Interior/Exterior Exterior/Wet Exterior/Wet

WOODGLUES Titebond Original Aliphatic Resin Titebond II Premium Crosslinking PVA Titebond II Dark Wood Crosslinking PVA Titebond II Fluorescent Crosslinking PVA Titebond III Ultimate Propriety Polymer Titebond Extend Aliphatic Resin Titebond Wood Moulding Thixotropic PVA Titebond Polyurethane Polyurethane Titebond Cold Press Polyvinyl Acetate Wudcare PVA Polyvinyl Acetate Polyten PVA Polyvinyl Acetate Fast Grab 5 minute Polyurethane Polyurethane Fast Grab Instant Polyurethane Polyurethane CONSTRUCTION Titebond PROvantage Project & Repair Propriety Polymer Titebond Heavy Duty Solvent Based Rubber Resin Titebond Solvent Free Water Based Vinyl Acrylic Titebond GREENchoice Polyurethane Polyurethane Titebond GREENchoice Cove Adhesive Crosslinking PVA Mastic CONTACT ADHESIVES Evo-Stik Industrial Thixotropic Thixotropic Contact Evo-Stik Timebond Thixotropic Non-drip RESIN & EPOXY ADHESIVES Magic Bond Epoxy Putty Epoxy Cascamite Powdered Resin Resorcinol/Phenol/Formaldehyde Polyproof Fully Waterproof Aerolite 306 Urea - Formaldehyde Araldite Standard Two Part Epoxy Araldite Rapid Two Part Epoxy Z-Poxy 5 Minute Two Part Epoxy Z-Poxy 30 Minute Two Part Epoxy Devcon Plastic Welder Two Part Epoxy SUPERGLUES, CYANOACRYLATES & SPECILIST GLUES West System Junior Two Part Epoxy West System Epoxy Large Two Part Epoxy West System Filleting Blend Filler Cellulose Fibre Mix West System Colloidal Silica Filler Colloidal Silica West System Low Density Filler Microballoon based West System Microfibres Filler Cellulose Cotton Fibre Blend Titebond Instant Thin Cyanoacrylate Titebond Instant Medium Cyanoacrylate Titebond Instant Thick Cyanoacrylate Titebond Instant Gel Cyanoacrylate Zap-A-Gap Cyanoacrylate Veritas Chair Doctor Crosslinking Vinyl Acrylic Copydex Solvent Free Latex Mitre Bond Adhesive Cyanoacrylate Mitre Bond Adhesive & Pen Cyanoacrylate PEARL GLUE Titebond Liquid Hide Natural Protein Emulsion Liberon Pearl Glue Scotch/Animal Liberon Rabbit Skin Glue Animal

Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes

Yes Yes Yes Yes Yes No Yes Yes Yes No No

GRP No No No GRP No No No Use with West System Epoxy Use with West System Epoxy Use with West System Epoxy Use with West System Epoxy Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No No No No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No Yes No No No Yes No No Use in the preparation of gesso

Yes Yes Yes Yes Yes No Yes Yes Yes Yes Yes

No No No No No No No No No No No

Interior Interior Interior Interior Interior Furniture/ Interior Interior Interior Interior Interior Interior Interior

Order online www.axminster.co.uk/woodjoining

331

Woodworking Adhesives
Titebond Wood Moulding Glue
Titebond Wood Moulding Glue is the thickest, fastest drying glue available for use with porous and semi-porous materials. Perfect for finish trim, or mouldings and other applications requiring a professional strength, non-running wood glue. Easy to use, cleans up with water before setting. Non-toxic Titebond Wood Moulding Glue provides strong initial tack, fast speed of set, yet allows for realignment of working pieces.

237ml (8floz) 473ml (16floz)

Inc.vat 4.50 7.30

Ex.vat 3.75 6.08

Code 600201 600202

Titebond III Ultimate Wood Glue Titebond Original Wood Glue


Titebond Original is the best glue we have used with biscuit joints, providing strong initial tack with fast setting time to help minimise clamping time. This aliphatic resin is becoming very popular with joiners, carpenters and cabinetmakers alike. Excess glue can be easily cleaned off with just a damp rag! Titebond Original has been independently tested for lead, cadmium and other metals under ASTM F963 and 16 CFR 1303 (total lead content). These are the testing methods specified for toy safety under the U.S. Consumer Product Safety Commission. It has also reviewed by an independent toxicologist and conforms to ASTM D4236 for art and craft materials. From Franklin of USA, described as an APP (Advanced Proprietary Polymer), Titebond III has been formulated as a dedicated wood glue to give you the ease of application of aliphatic/PVAs and the water resistance of polyurethane glues. Making an exceptionally strong bond on wood-to-wood joints, it has longer open time and higher viscosity than conventional PVAs and will maintain integrity at lower application temperatures. All of which makes for easier and less fraught assembly procedures. Polyurethane glue has undoubted flexibility of use and massive strength but is a very persistent adhesive, difficult to clean up from equipment and particularly hands. Titebond III has been designed to give you the strength of wood-to-wood bonds without the problems. It cleans up with water whilst wet, sands off without softening when fully cured, is unaffected by finishes, solvent and heat and is mildew resistant. It is suitable for interior and exterior use. Titebond III Ultimate wood glue has been independently tested for lead, cadmium and other metals under ASTM F963 and 16 CFR 1303 (total lead content). These are the testing methods specified for toy safety under the U.S. Consumer Product Safety Commission. It has also reviewed by an independent toxicologist and conforms to ASTM D4236 for art and craft materials.

Titebond II Fluorescent Wood Glue


See the unseen before it spoils your finished work; Titebond II Fluorescent Wood Glue shows you where the glue contaminated surfaces are which you thought were clear! Titebond II Wood Glue has been used as a trusted professional glue for many years which cleans up with water and sands off well when dry, but like all glues some bits get missed in preparation and it is not until the stain wont bite or the unsightly marks show under your finish that you know they are there. Assemblies which use Titebond II Fluorescent Wood Glue show them up under a blacklight (ultra violet lamp) before you commit to your stain or finish but you wont see any difference under normal light conditions and the strength of the bond is as impressive as ever.

237ml (8floz) 473ml (16floz) 3.8 litres (1 US Gall) 19 litres (5 US Gall)

Inc.vat 4.25 6.76 26.99 102.95

Ex.vat 3.54 5.63 22.49 85.79

Code 600203 600204 600205 952201

237ml (8floz) 473ml (16floz) 3.8 litres (1 US Gall) 19 litres (5 US Gall)

Inc.vat 7.00 11.30 45.35 178.50

Ex.vat 5.83 9.42 37.79 148.75

Code 301413 301414 301416 952203

3.8 litre(1 US Gall)

Inc.vat 34.96

Ex.vat 29.13

Code 702365

Wudcare PVA - 5 Minute


Not just another PVA glue. Under proper working conditions this will give you an initial bond in just 5 minutes and a firm bond in 10. It is suitable for interior and exterior use and has been creep failure tested to BS4071 to eliminate the problem suffered by many other PVAs. In common with other Wudcare products, this glue does what it says on the pack, outperforming others. If you want a versatile, quick, reliable wood glue look no further. Recommended for laminating and veneering wood as well as construction joints.

Titebond II Dark Wood Glue


Titebond II Dark Wood Glue is a dyed version of Titebond II Wood Glue. It provides a strong initial tack and fast speed of set to reduce clamp time. It also develops a bond stronger than the wood itself, offers excellent sandability and is unaffected by finishes. Titebond Dark is ideal for wood, hardboard, particleboard, leather, cloth and most other porous materials. Titebond Dark is easy to use, non-toxic and cleans up with water.

237ml(8floz)

Inc.vat 5.15

Ex.vat 4.29

Code 600206

500ml

Inc.vat 4.36

Ex.vat 3.63

Code 301356

Titebond II Premium Wood Glue


Titebond II aliphatic resin passes the strict American ANSI Type 2 specifications for water resistance. It works well on all exterior woodworking projects including outdoor furniture, birdhouses, planters and picnic tables. Titebond II Premium provides a strong initial tack, fast setting speed, superior strength and excellent sandability. It is also FDA approved for indirect food contact (cutting boards and laminate trim). Titebond II is easy to use, nontoxic, weatherproof and cleans up with water whilst wet. Titebond II Premium wood glue has been independently tested for lead, cadmium and other metals under ASTM F963 and 16 CFR 1303 (total lead content). These are the testing methods specified for toy safety under the U.S. Consumer Product Safety Commission. It has also reviewed by an independent toxicologist and conforms to ASTM D4236 for art and craft materials.

Titebond Extend Wood Glue


Formulated from the Original Wood Glue this professional interior aliphatic resin emulsion will give you the same reliability of bond and more. Providing you with more open time for complicated assemblies and the extended application times needed for laminations. Developing a bond stronger than the wood itself, Extend Wood Glue is also stiffer and more heat resistant in the fully cured state than Titebond III and most other PVA and aliphatic resins, making it most suitable for laminations in shaped work and interior applications likely to be exposed to higher than normal temperatures (kitchens, fire surrounds, radiator covers, trivets, airing cupboards to name but a few).

Polyten PVA Glue


A water resistant, clear drying fast grab PVA adhesive producing, within 10 minutes, a secure bond which is fully dry in 2 hours.

500ml 1 litre

Inc.vat 4.90 8.45

Ex.vat 4.08 7.04

Code 410350 410349

Clamps and Cramps


We offer a full range of clamps and cramps to help with any gluing up task, please see the Clamps, Cramps and Workholding section.

237ml (8floz) 473ml (16floz) 3.8 litres (1 US Gall) 19 litres (5 US Gall)

Inc.vat 4.99 7.99 32.30 123.00

Ex.vat 4.16 6.66 26.92 102.50

Code 600207 600208 600209 952202

473ml (16floz) 3.8 litres (1 US Gall)

Inc.vat 7.80 30.25

Ex.vat 6.50 25.21

Code 701738 701739

332

Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95

Order freephone 0800 371822

Construction Adhesives
Titebond Cold Press for Veneer
Titebond Cold Press for Veneer is a high-quality, economical alternative to contact cement for large-scale bonding of veneers to flat surfaces. It is specifically formulated for cold press laminating of wood to solid woods, particleboard, MDF, plywood and other porous materials. It offers a moderate speed of set, and contains none of the harmful or corrosive fumes typical of most contact cements. It also helps prevents bleed-through on open grained and unbacked wood veneers.

Titebond Polyurethane Glue


Titebond Polyurethane Glue is a professional strength waterproof glue specially formulated for multi-purpose applications. In addition to its superior wood-to-wood performance, it is equally effective for metal, ceramic, plastic, Corian(r) stone and other porous/non-porous materials. Titebond Polyurethane is ready to use, offers excellent sandability and is unaffected by finishes. Twice as thick as traditional polyurethanes it provides a non-running, non-drip glue line for more precise applications. Titebond Polyurethane will not become brittle with age and will not expand or contract in the glue joint. Polyurethane glues cure by moisture and an effervescence is a by-product of this, there is no strength in this and it is easily sanded off when dry. In very dry timber it may be necessary to moisten one surface to encourage curing to take place.

Titebond Heavy Duty Construction Adhesive


Bonds wood, metal, plastics and some rubbers Brick, concrete, ceramics and plasterboard Strong gap filling bond Interior and exterior use Solvent based rubber resin Setting time 6-24 hours Tube 311ml & 215mm length (excluding nozzle)

946ml (32oz) 3.8 litres (1 US Gall)

Inc.vat 10.45 28.40

Ex.vat 8.71 23.67

Code 952215 952216

Glue Bottle Set


An excellent value glue applicator incorporating a glue roller and twelve other useful various nozzles. The nozzles come in different sizes and configurations including a brush applicator, dowel hole nozzles and a specific nozzle purely for biscuit joints. Supplied with two empty glue bottles to fill with the woodworking adhesive of your choice. The nozzle thread is compatible with an 8oz Titebond container making it possible to fit any nozzle directly to the Titebond bottle.

118ml (4oz) 237ml (8floz) 355ml (12floz)

Inc.vat 6.80 10.30 12.85

Ex.vat 5.67 8.58 10.71

Code 212513 600211 600212

311ml(10.5oz) 1 Tube Box of 12 Tubes Heavy Duty Titebond Construction Adhesive - 60 Tubes Heavy Duty Sealant Gun

Inc.vat 2.56 27.60 130.50 9.50

Ex.vat 2.13 23.00 108.75 7.92

Code 600210 719621 718695 610002

Fast Grab 5 Minute Polyurethane Glue


This massively strong polyurethane glue is economical to use, has a fast initial grab in 5 to 10 minutes and a firm bond in 4 hours. Full cure will require 24 hours. After setting, the bond is very stable resisting creep , immersion in salt water and the elements. Fast Grab will also bond with cement, metal and many combinations of materials.

Glue Bottle Set

Inc.vat 13.70

Ex.vat 11.42

Code 100242

Titebond PROvantage Projects & Repair


Waterproof formula provides Bonds wood, drywall, ceramic, metal, plywood, hardboard and more Fast grab and excellent bond strength Solvent-based Low VOC formulation Interior and exterior use Tube 311ml & 215mm length(excluding nozzle)

Axminster Glue Bottles


Well made and will give good service when used with the PVA 500387 and aliphatic resin groups of wood 500397 500214 500396 and craft glues. There are four bottles, each dedicated to a particular type of glue application: Roller - This lays glue over flat surface areas via a glue feed roller. Biscuit Jointer - With a head to match the radius of the biscuit jointers blade, it will deliver glue accurately into the pocket for all sizes of biscuit. Dowel and Biscuit Jointer - With a side ejection nozzle that will feed glue to the sides of the holes for dowels in excess of 10mm diameter and the pockets for standard width biscuits. Brush - With a brush on the head for a more conventional type of application. All four bottles come complete with closures to keep the glue fresh.

9
Ex.vat 3.04 Code 952204

500ml

Inc.vat 9.95

Ex.vat 8.29

Code 500010

311ml(10.5oz) 1 tube

Inc.vat 3.65

Wudcare Professional Wipes for Hands & Surfaces


Polyurethane glue is great stuff on wood but is not easy to remove from hands; these wipes will clean you up. Made to meet the needs of trades people and containing hand safe cleaning solvents. These Professional Wipes will also clean surfaces, removing resins, paint, oil, inks, tar, grease, dirt and grime. Effective for emergency clean up of fabric, interior surfaces and paint spills within 24 hours. Additionally they will rejuvenate old tile grout, sealant and paintwork. You can use them to remove label adhesive, one of the most annoying jobs in the modern world made easy.

Titebond Solvent Free Construction Adhesive


Type - Blend of polymer emulsions Suitable for Wood, Metal, Plastics and some Rubbers Polyurethane and polystyrene Interior and Exterior use Solvent free adhesive Setting time 6-24 hours Tube 311ml & 215mm length(excluding nozzle)

Roller Bottle Biscuit Bottle Dowel Glue Bottle Brush Bottle

Inc.vat 2.40 2.56 2.56 3.25

Ex.vat 2.00 2.13 2.13 2.71

Code 500214 500387 500396 500397

Lamello LK Glue Systems

311ml(10.5oz) 1 Tube Box of 12 Tubes Heavy Duty Sealant Gun

Inc.vat 3.70 39.90 9.50

Ex.vat 3.08 33.25 7.92

Code 409001 714526 610002

Wipes (Pkt 50) Wipes (Pkt 100)

Inc.vat 4.25 7.00

Ex.vat 3.54 5.83

Code 500469 500468

Fast Grab Instant Polyurethane Glue


For those of you in a hurry Fast Grab Instant has all the properties and benefits of Fast Grab but this gun-able Polyurethane adhesive grabs in one minute, sets to a strong bond in five minutes reducing clamping time to a minimum. If quick assembly is your need then this is the glue for you. However, if your joint is to be stressed or jolted then it is wise to allow 24 hours for the full cure to take effect before you ask it to take rough handling. 310ml cartridge.

Titebond GREENchoice Premium Polyurethane Construction Adhesive


For clean efficient bulk glue delivery in any workshop Lamello have the LK system, delivering water soluble glue in a measured controllable flow. 3 models are available taking 3, 5 or 10kg, glue load, the unit is pressurised by either using a foot pump and the connector supplied or via a compressed air system. Please follow this link to our website for more information
High strength even when bonding two non-porous materials Suitable for interior and exterior projects Fast grab and cure Safe for plastic and foam (test recommended) Bond porous and non-porous materials Smooth bead for effortless extrusion Operates in near-freezing temperatures Tube 311ml and 215mm length(excluding nozzle)

310ml

Inc.vat 6.70

Ex.vat 5.58

Code 500009

www.axminster.co.uk/LKgluesystems

311ml(10.5oz) 1 Tube Box of 12 Tubes

Inc.vat 6.50 70.00

Ex.vat 5.42 58.33

Code 952217 718696

Order online www.axminster.co.uk/woodjoining

333

Construction Adhesives
Titebond GREENchoice Professional Cove Adhesive
Suitable for drywall, plaster, paint, wallpaper, paneling & ceramic tile Impact resistant, fast strong grab, require no clamping VOC-compliant formula contains no ozone-depleting chemicals Nonflammable, emits no harmful fumes Safer for you and the environment Cleans up with water Tube 311ml & 215mm length(excluding nozzle)

Resin & Epoxy Adhesives


Polyproof Fully Waterproof Glue Magic Bond Epoxy Putty
Not strictly an adhesive but certainly a bonding agent, this remarkably useful repair material should be in every toolbox and emergency repair kit in the home and on the road. Take off the amount you want, knead the outer layer into the inner core until thoroughly mixed. Use the putty to fill and make waterproof repairs on wood, PVC, fibreglass, ceramics and a whole range of metals. Sets in 20-30 minutes and makes a strong repair in one hour. This two part glue is totally waterproof when dry (it is a resorcinol/phenol/formaldehyde glue). It can be used for a wide range of applications including bonding of normally difficult timbers such as teak or preservative treated timbers. It is used extensively for marine applications as it can withstand continuous immersion in water. Also suitable for structural timber, laminating roof members and form work. Tack time 10 - 30 mins, cure time 4 hours dependent on working temperature. Resin and hardener supplied together 670g. (Formerly known as Cascaphen/Extraphen).

311ml (10.5oz) Pack of 12 Tubes

Inc.vat 3.46 37.30

Ex.vat 2.88 31.08

Code 952205 718697

Putty

Inc.vat 9.50

Ex.vat 7.92

Code 300288

Waterproof Glue 500g

Inc.vat 31.20

Ex.vat 26.00

Code 400014

Cox Powerflow Sealant Gun


This manual sealant applicator caters for all the needs of the professional, taking both 310ml and 400ml cartridges. The heavy duty design allows for use with medium to high viscosity material. The gun has been engineered to have a life of many thousands of cartridges. The patented Pressure Relief Device can be turned on or off. On; it helps minimise any overflow, off; it allows a more continuous flow for a long even bead. The large aluminium cast trigger with a 12:1 ratio aids control. All parts made to the highest standards and of the material most suitable for the job.

Cascamite Powdered Resin Wood Glue


Cascamite (also known as Polymite) is a very well respected adhesive in the trade, especially formulated for exterior joinery that will be exposed to the weather. A synthetic resin, it is waterproof when dry, sold as a powder it is mixed with water before use and has good gap filling properties, suitable for load bearing and laminating. Leaves a clear glue line and will not discolour hardwood, mould resistant. Tack time 1-2 hours cure time 6 hours (temperature dependent) An excellent well proven adhesive for joinery, cabinet work or boat building.

Aerolite 306 Glue Pack


This much valued urea-formaldehyde/acid hardener glue has been used for many years in boat building and light aircraft wood applications for its strength and dependability of bond. The powder resin is mixed with warm water into a thin brushable cream and the hardener is applied to the mating surface. The two parts are then clamped in close contact for the set to be completed. Working or open time depends on the ambient temperature and humidity but will be in the region of 5-25 minutes. Similarly the clamping time will be influenced by these factors but will need to be left for 1.1/2 - 3.1/2 hours. However, full strength may take up to 14 days to acquire.

Powerflow Sealant Gun

Inc.vat 17.10

Ex.vat 14.25

Code 951046

125g 220g 500g 1.5kg 3kg 6kg

Inc.vat 3.76 5.80 11.56 19.00 35.56 62.99

Ex.vat 3.13 4.83 9.63 15.83 29.63 52.49

Code 400022 400024 400026 400023 400025 400027

Glue Pack 375g Hardener 125ml Resin Powder 250g

Inc.vat 14.60 6.76 12.35

Ex.vat 12.17 5.63 10.29

Code 310467 310468 310469

Cox Easiflow HD Sealant Gun


Specifically designed for occasional use by the professional or home improvement enthusiast, these cartridge applicators are built to the same high standards as all Cox guns and represent excellent value for money. It is fitted with a patented Pressure Relief Device which slightly backs-off the plunger when the trigger is released to help minimise any overflow. Takes 310mm to 400mm cartridges

Araldite Epoxy Resin Goo Gone


Nothing is more effective than Goo Gone when it comes to removing the residue left behind by selfadhesive labels. Goo Gone is the best product weve discovered for getting rid of those annoying tacky marks. It is also effective on removing oil, tar, wax, grease, scuff marks etc. Goo Gone has a pleasant orange aroma and is supplied either in a 235ml bottle, or a 473ml spray container. Araldite is a two part epoxy resin that, when mixed, cures to produce an incredibly strong bond between many different types of materials. The adhesive should be mixed a little at a time in equal proportions, for convenience the syringe packs dispense equal amounts of adhesive at a time. Standard Araldite requires at least 24 hours before the bond is totally set. Where curing time is more important Araldite Rapid can be used with its much faster 10 minute bond.

Easiflow HD Sealant Gun

Inc.vat 5.45

Ex.vat 4.54

Code 951045

Contact Adhesives
Evo-Stik Timebond
A thixotropic non-drip adhesive with the ability to provide for slight re-positioning adjustments prior to a firm grab taking place. Excellent for use on horizontal and vertical applications. Available in 250ml, 500ml and 1 litre tins.

235ml 473ml Spray

Inc.vat 7.20 10.30

Ex.vat 6.00 8.58

Code 477112 210965

Standard 24g Syringe Rapid 24g Syringe

Inc.vat 6.25 7.70

Ex.vat 5.21 6.42

Code 340085 340282

Axminster Disposable Brushes

Z-Poxy Epoxy Resin


Z-Poxy is a quick setting two part epoxy resin giving a clear, tough, permanent bond to wood, metals, fibreglass and many plastics. It has excellent gap filling and shock resistant characteristics in a glue line that doesnt shrink and is resistant to fuel, oil and many chemicals and solvents. Available with either a 5 minute or 30 minute set time. Both packs are 8 fl.oz (4 fl.oz resin; 4 fl.oz hardener).

250ml 500ml 1 litre

Inc.vat 7.20 13.25 22.70

Ex.vat 6.00 11.04 18.92

Code 900365 900368 900360

A pack of 12 disposable brushes, 12mm wide with tubular handles. Use for applying oils, paints, stains, suds, glues, etc.

Pack 12

Inc.vat 3.80

Ex.vat 3.17

Code 100136

30 Minute 235ml(8 fl.oz) 5 Minute 235ml(8 fl.oz)

Inc.vat 16.66 16.66

Ex.vat 13.88 13.88

Code 990120 990121

334

Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95

Order freephone 0800 371822

West System Epoxy


Devcon Plastic Welder
So many things are made of plastic and only a few glue types will make viable repairs to them. This one from the USA is designed to do just that, and a few other things besides. Hard plastics, metals, concrete, vinyl, PVC piping and fibreglass can all be repaired with Plastic Welder (but not polyethylene or polypropylene plastics). The waterproof bond takes place in 3-4 minutes, can be handled in 15 and reaches full strength in 24 hours. Clean and easy to use the two-part syringe dispenser delivers equal quantities of glue and hardener to take the guesswork out of the mix. Combines to make 25ml.

West System Epoxy Large Pack


Epoxy resin and hardener developed originally for the boat building industry from simple gluing of battens to fully laminating wooden yacht hulls. Use for any application which calls for an extra strong water resistant joint. West System is quality assurance registered to BS5750/Pt2, IS09002 and AQAP4 Edition 2. Approved by Lloyds Register of Shipping. A high strength, easy to use, epoxy system. Available in two different pack sizes and with two speeds of hardener. The 205 Hardener (fast) will give a pot life of 15-20 minutes and the 206 Hardener (slow) will give a pot life of 25-30 minutes. A workable cure is achieved in 5-7 hours with full strength developed in 48 hours.

West System Six10 Epoxy Adhesive 190ml


A two part epoxy adhesive for permanent, waterproof structural gap filling and gluing applications; bonds to wood, metals, fibreglass and concrete. Six10 is a two part non-sagging epoxy, suitable for vertical or overhead use. Use to fill cracks, coat and seal end grain on wood, wet out light to moderate weight reinforcing fabrics such as fibreglass and carbon fibre; suitable for small fibreglass boat repairs. Long working time with fast thru-cure. The special static mixer nozzle dispenses both resin and hardener in metered amounts. Working time is 42 minutes at 21C, the mix will solidify in 56 hours, temperature dependent. Supplied in a 190ml cartridge, it will fit a standard sealant gun.

Plastic Welder

Inc.vat 7.66

Ex.vat 6.38

Code 322045

West System Epoxy

205 Fast 1.2kg 206 Slow 1.2kg

Inc.vat 39.25 39.25

Ex.vat 32.71 32.71

Code 702682 702684

West System Filleting Blend Filler West System Mini Repair Kit
All you need at home or on the boat for the smaller repairs using the unique West System. The pack contains: 105 Resin, 205 Hardener, Filler 403 and 407, application tools, gloves, 2 mini pumps and mixing pots for accurate mixing all included with full instructions. With this pack you can sort it before it becomes a bigger problem, you know what they say about stitches and time! Consisting of a mix of cellulose fibres and other fillers. Use in filleting applications where a natural looking finish is required. Alcohol or water based stains can be added to adjust the colour. Add 15% to 25% by weight to the epoxy mixture. Colour: tan.

Six10 Epoxy Adhesive 190ml

Inc.vat 20.95

Ex.vat 17.46

Code 501667

West System Syringes


Code 500223
Graduated plastic syringes are useful to measure your small quantities accurately and to apply the adhesive to difficult to get at areas or holes. Supplied in two versions, 50ml graduated in 1ml divisions or 10ml graduated in 0.5ml divisions. Packs are 2 of the same size or 1 of each size.

150g

Inc.vat 10.96

Ex.vat 9.13

West System Colloidal Silica Filler


Colloidal Silica is a general purpose thickening additive suitable for bonding, gap filling and filleting. Used to control the viscosity of the epoxy, or used in combination with other fillers to control the working characteristics of an epoxy mix. Add 3% to 8% by weight to the mix. Colour: off-white.

Repair Kit

Inc.vat 17.00

Ex.vat 14.17

Code 200579

Syringes 10ml (Pkt 2) Syringes 50ml (Pkt 2) Syringes 1 x 10ml, 1 x 50ml

Inc.vat 1.87 6.25 4.00

Ex.vat 1.56 5.21 3.33

Code 380710 380727 380703

West System Users CD


This instructional CD and product guide for West System is invaluable right from the planning stage. It is has been produced to help you become familiar with the processes and combinations of products to help you achieve the end result you want. We strongly recommend you take a copy of this CD to get the most from this remarkably versatile system in the home, workshop and on your boat.

West System Mixing Pot


Code 500221 500222
Strong reusable 800ml mixing pots. Any unused cured, solid epoxy easily pops out.

60g 275g

Inc.vat 7.85 17.40

Ex.vat 6.54 14.50

800ml Mixing Pot

Inc.vat 1.06

Ex.vat 0.88

Code 500224

West System Low Density Filler


Blended microballoon based filler for high strength to weight putties that are easy to shape and sand. Add 20 - 40% by weight to the epoxy mix according to your requirements. Cured colour: dark reddish brown.

West System Notched Spreaders


For controlled and consistent application of epoxy blends there is a separate size notch on each of three sides to give you 3mm, 4mm, or 6mm beads as required. With a resilient flexibility, these reusable plastic spreaders (110 x 110mm ) make a quick job of ensuring an even depth of material is spread. 2 per pack.

Users CD

Inc.vat 1.99

Ex.vat 1.66

Code 202490

West System Junior Pack


You dont always want large quantities of resin and hardener sitting on the shelf, which is why we have introduced West Systems Junior Pack to our range. When mixed the resin and the hardener will provide up to 600 grams of adhesive for the smaller jobs and repairs.

150g

Inc.vat 15.35

Ex.vat 12.79

Code 100585

West System Microfibres Filler


Code 310403
A blend of cellulose cotton fibres, used as a thickening additive to give the epoxy improved bonding and gap filling qualities. Add 4 - 16% by weight to the epoxy mix according to your requirements. Cured colour: off white.

Spreader (Pkt 2)

Inc.vat 3.40

Ex.vat 2.83

Code 380901

West System Plastic Squeegees


Ex.vat 5.83 13.00 Code 100586 340318
Flexible but with sufficient resistance to control even quite stiff mixes. They are reusable and are chamfered on the two long sides for more sensitive control of the material. Size 90mm x 150mm. 2 per pack.

600g

Inc.vat 21.40

Ex.vat 17.83

West System 804 Reusable Plastic Mixing Sticks (Pkt 25)


For mixing, applying and filleting, they are easily cleaned ready to re-use. To ensure a thorough mixing of the resin/hardener and any filler blend, they have a squared, bevelled end that reaches mixing pot corners. Epoxy peels off easily when cured. 25 per pack.

150g 750g

Inc.vat 7.00 15.60

Squeegee (Pkt 2)

Inc.vat 4.00

Ex.vat 3.33

Code 380802

West System Pump Set


When pressed down once, each pump will dispense resin/hardener at the correct ratio. They come as a set of two and will attach directly to the resin and hardener containers. Suitable for metal pack containers.

West System Epoxy Resin Removing Cream


Formulated to remove uncured epoxy from the skin in the event of accidental contamination. 250ml.

Inc.vat Reusable Plastic Mixing Sticks (Pkt 25) 5.70

Ex.vat 4.75

Code 501620

Pump Set for 1.2kg pack Pump Set for 6kg pack

Inc.vat 16.36 20.26

Ex.vat 13.63 16.88

Code 702686 702687

250ml

Inc.vat 6.50

Ex.vat 5.42

Code 382004

Order online www.axminster.co.uk/woodjoining

335

Superglues, Cyanoacrylates & Specialist Glues


Copydex Adhesive West System Barrier Cream
Protects against resins, oils, grease and petroleum spirits. This multi-purpose barrier cream has a special bactericidal ingredient to minimise the risk of skin infection. 250ml.

Zap-A-Gap Adhesive
Bonds practically anything in 10-20 seconds. Allows from 7-10 seconds for careful positioning and has the ability to bridge slight gaps. Once parts are in position, cure time can be speeded up with a quick spritz of Zap Zip Kicker.

250ml

Inc.vat 6.50

Ex.vat 5.42

Code 308310

Copydex is the solvent free, safe to use (it complies with stringent EU child safety legislation) adhesive for home, office and workbench. A mend-it-all adhesive suitable for fabric, carpets, leather, canvas, paper, card, wood, cork and many other materials. Use it for finishing upholstery projects, toy making, general craft use and a multitude of repairs on absorbent and non-absorbent surfaces.

Latex Gloves
Lightweight disposable latex surgical type gloves for protection from stains etc. when dyeing or using pigments. The pack quantity refers to the number of individual gloves.

28g

Inc.vat 6.10

Ex.vat 5.08

Code 990095

250ml

Inc.vat 9.60

Ex.vat 8.00

Code 400307

Zap Z-7 Debonder


If you are using super glues then the chances are at some point in your life you will need Z-7 Debonder. Its special formula softens cured super glues into a jelly like substance that is easily removed from fingers, surfaces etc. A few applications on a joint allows disassembly after about four minutes. However, its formula may affect some plastics or painted surfaces. Can be used to release accidently bonded fingers.

Mitre Adhesive
Mitre Bond Adhesive
Ex.vat 3.67 Code 990099
A highly effective super fast adhesive with activator spray. Formulated to bond smooth close fitting surfaces of wood, metal, glass and a wide range of other materials. Its so easy to use, spray one face of the joint with the activator apply a small amount of the adhesive to the other face and bring both sides together and hold for approximately 10 seconds; you will be amazed.

Pack of 100

Inc.vat 7.25

Ex.vat 6.04

Code 600158

Superglues, Cyanoacrylates & Specialist Glues


9

28g

Inc.vat 4.40

50g

Inc.vat 7.20

Ex.vat 6.00

Code 600402

Titebond Instant Glues


Cyanoacrylates (CA) have traditionally been called super glues for their adhesion properties to a wide range of different materials and their effectiveness for unique applications. The Titebond Instant range of CA adhesives covers many different applications; the viscosity and setting times vary according to the chosen product. The Thin version has a handling time of 5 seconds and a setting time of 3 seconds and is good for running into hairline cracks for repairs and stabilising small sections of timber. The Medium version has a 7 seconds handling time and a setting time of 5 seconds, and would be a more general purpose type of CA glue. The Thick version has a 10 seconds handling and 8 seconds set time making it ideal for stabilising porous woods and using with MDF and trimming carpentry components. The Gel has a 30 seconds handling with a 20 seconds set time and has excellent gap filling properties. Again its performance is very good when used with porous materials. All types are supplied in 56.8g (2oz) no clog applicators.

Zap Zip Kicker


The best all round accelerator for both Zap and all other super glues. A quick spray forces the almost immediate cure of glue, expands the gap filling properties and solves a lot of tough bonding problems.

Mitre Bond Adhesive & Pen


Mitre Bond is a super fast adhesive for fixing close fitting surfaces and will bond wood, metal, glass and other materials. This kit contains 3 x 50g packs of Mitre Bond adhesive and an activator pen that will set super glue in 15 seconds. The activator pen is quick and allows you to be very precise and will not give any overspray or staining.

56g

Inc.vat 6.95

Ex.vat 5.79

Code 990098

Adhesive & Pen

Inc.vat 14.40

Ex.vat 12.00

Code 702454

Pearl Glue

Thin 56.8g(2oz) Medium 28.4g(1oz) Medium 56.8g(2oz) Thick 56.8g(2oz) Gel 56.8g(2oz) Activator 59ml(2oz)

Inc.vat 11.35 7.85 11.35 11.35 13.75 8.95

Ex.vat 9.46 6.54 9.46 9.46 11.46 7.46

Code 210868 501306 210869 210870 210871 952218

Liberon Pearl Glue Veritas Chair Doctor Glue


Chair Doctor Glue does exactly what the name implies - it fixes chairs. If a chair has a loose rung an injection of Chair Doctor Glue will first swell the rung and then bond it in position. The secret is the low viscosity. It soaks into the end grain, swells the wood then freezes the wood in its swollen state as it cures. A film of dry glue is left on the walls of the wood cells preventing contraction. The glue can penetrate the narrowest of cracks and is supplied in a bottle with a micro dropper applicator tip which lets you place the glue accurately. For regular cabinetmaking PVA adhesive is the best choice; but for fixing loose joints where disassembly is not an option Chair Doctor Glue is the most suitable. Available as a 57ml(2fl.oz) bottle or the Pro Kit which contains 114ml(4fl.oz) of glue, syringe and three different injection needles. Arguably still the best glue you can buy for furniture and interior use. Essential for re-gluing or repairing antique furniture as it is the only glue compatible with the original used and it enables joints to be taken apart again during future repairs. Should you need to break the joint at a later date it can be heated or steamed apart. To make the glue, estimate the amount you will need and pour the pearl beads into the inner container of your glue pot, top up with hot water so that it just covers the beads and allow to soak overnight. Heat the glue and stir frequently and it is ready to use as soon as it is all liquid with no lumps. You will find the optimum consistency in use and for the job in hand although ideally it should run freely in a continuous string from a raised brush without breaking up into small droplets. Add more hot water to thin or more pearls to thicken. Aptly named, this glue is a gem to work with.

Titebond Instant Bond Activator


Titebond Instant Bond Activator is used to accelerate the curing of all Titebond Instant Bond Adhesives. The Activator is especially effective for large gaps, very porous woods and bridge bonding joints, bonding acidic surfaces or in low humidity conditions. It is a heptanebased solvent that will not mar finishes or damage plastics.

59ml(2oz)

Inc.vat 8.95

Ex.vat 7.46

Code 952218

Chair Doctor 57ml Chair Doctor Pro Kit 114ml

Inc.vat 7.90 9.60

Ex.vat 6.58 8.00

Code 510450 510451

250g 500g 1kg 5kg

Inc.vat 6.10 10.00 13.30 48.70

Ex.vat 5.08 8.33 11.08 40.58

Code 800289 800291 800288 800290

336

Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95

Order freephone 0800 371822

Glue Applicators
Titebond Liquid Hide Glue
This product has similar properties to Pearl Glue, but in liquid form it is ready to use. It forms an excellent strong bond with the timber and its slow setting properties allow time for precise assembly. Like Pearl Glue it can be reversed by the application of gentle heat, making it excellent glue for use in furniture repair or small veneering jobs. Due to the unique properties of this glue, we suggest purchasing the required amount for the job in hand, rather than storing for long periods of time. Once opened, must be used.

Glue Bottle Set


An excellent value glue applicator incorporating a glue roller and twelve other useful various nozzles. The nozzles come in different sizes and configurations including a brush applicator, dowel hole nozzles and a specific nozzle purely for biscuit joints. Supplied with two empty glue bottles to fill with the woodworking adhesive of your choice. The nozzle thread is compatible with an 8oz Titebond container making it possible to fit any nozzle directly to the Titebond bottle.

118ml (4floz) 237ml (8floz)

Inc.vat 4.60 7.10

Ex.vat 3.83 5.92

Code 600224 600225

Liberon Rabbit Skin Glue


Traditional glue used in the preparation of gesso and as a base for gilded and painted surfaces. Also use as a glue size for gold and metal leaf.

Glue Bottle Set

Inc.vat 13.70

Ex.vat 11.42

Code 100242

Axminster Power Hand Clamp


These clamps are reliable and effective, you can never have enough. Their box joint design ensures both strength and correct alignment of the jaws. A spring-loaded pawl engages onto a toothed steel bar as the handles are squeezed together giving positive non-slip clamping with a pressure of 35 to 40kg. Simply pressing the lever between the handles releases the clamp. The handles have non-slip moulded inserts to increase grip and the shape makes them easy to squeeze. The jaw pads have a cross vee to clamp round or irregular pieces. The pads swivel for even contact even when clamping non-parallel surfaces.

Lamello Glue Dispenser


Inc.vat 10.30 Ex.vat 8.58 Code 800446
Designed to dispense the glue into the groove with no mess, a glue dispenser is a very useful accessory for any biscuit jointer. Two types are offered. The MINICOL glue dispenser consists of a non slip base and a glue bottle with a nozzle specifically shaped to fit the groove. After use the bottle is put back into the base which seals the nozzle, preventing blockage and drying out of the glue.

250g

Veneer Tape
The only way to make sure of secure positioning of joins when laying up veneers and holding them in position until the glue is set. Tear off a piece, moisten and stick down for a firm hold until you want to remove it, then just moisten and peel it off. This paper tape is perforated so you can see the joins underneath, allowing the moisture from the glue to evaporate and moisture to get under the tape when removing.

58mm 100mm

Inc.vat 5.20 7.15

Ex.vat 4.33 5.96

Code 210209 210210

9
Minicol

20mm x 200m

Inc.vat 13.25

Ex.vat 11.04

Code 464187

The DOSICOL glue dispenser is a pump action bottle with a nozzle shaped to fit the groove exactly. The pump can be adjusted to dispense precisely the required amount of glue. Supplied complete with stand.

Glue Applicators

Minicol Dispenser Dosicol Dispenser

Inc.vat 37.60 72.50

Ex.vat 31.33 60.42

Code 600497 410156

6 Piece MultiPurpose Spreading Spatulas


500214 500387 500396 500397

Axminster Glue Bottles


Axminster Glue Bottles are designed to give you all the benefits of more expensive glue applicators at a much reduced price. Theyre well made and will give good service when used with the PVA and aliphatic resin groups of wood and craft glues. There are four bottles, each dedicated to a particular type of glue application: Roller - This lays glue over flat surface areas via a glue feed roller. Biscuit Jointer - With a head to match the radius of the biscuit jointers blade, it will deliver glue accurately into the pocket for all sizes of biscuit. Dowel and Biscuit Jointer - With a side ejection nozzle that will feed glue to the sides of the holes for dowels in excess of 10mm diameter and the pockets for standard width biscuits. Brush - With a brush on the head for a more conventional type of application. All four bottles come complete with closures to keep the glue fresh.

Spotted at a general craft market , these spreaders were being used to apply glue to felts, paper, cardboard etc, they can also be used with thick paint to create special patterns. The tip is flexible and can be used with various amounts of pressure. Glue wont stick to the polypropylene plastic, which allows dried glue or paint to just chip off, so they can be used again and again. Length 150mm, width 15mm.

Box of 10 Assorted Axminster Spring Clamps


For those wishing to stock up on their spring clamps, here is the most economical way to do it - a box of 10, containing 4 off 35mm, 4 off 60mm and 2 off 80mm capacity spring clamps. Now if that doesnt grab you, what will?

Clamps - Pack 10

Inc.vat 11.70

Ex.vat 9.75

Code 110036

Pack 6

Inc.vat 4.00

Ex.vat 3.33

Code 600906

Clamps and Cramps


A wide range of clamps and cramps are available, please refer to our section Clamps and Cramps for more information.

36 Piece Assorted Paint Brush Set


Great for applying glue, stains and general workshop use. Contains 12 of each size, 25mm, 38mm, 50mm. If you spoil one of these it isnt going to hurt; reasonable quality brushes at a real value for money cost.

Duct Tape
A strong tape with a multitude of uses around the home workshop. Can be used for sealing ducting and even holding joints together. Length 25 metres per roll.

Roller Bottle Biscuit Bottle Dowel Glue Bottle Brush Bottle

Inc.vat 2.40 2.56 2.56 3.25

Ex.vat 2.00 2.13 2.13 2.71

Code 500214 500387 500396 500397

Brush Set (36 Pce)

Inc.vat 13.96

Ex.vat 11.63

Code 600580

25 Metres

Inc.vat 4.70

Ex.vat 3.92

Code 410221

Order online www.axminster.co.uk/woodjoining

337

Hotmelt Glue
Professional Gas Powered Glue Gun Axminster Glue Gun
A hot melt glue gun accepting full size 12mm adhesive sticks, with trigger fed delivery. An integral stand flips out of the way when the gun is in use. After a ten minute warm up period glue delivery is good with each trigger pull and at a temperature that will give maximum open time within the specifications of the glue itself. Maximum delivery 25g/min. No need to worry about the length of your power cord with this gun, you can take the gun to the work wherever it is. Powered by butane gas as used in cigarette lighters and easily available in refill canisters. The heat source is a catalyser element giving a variable temperature control, with a maximum of 200C. The push button ignites the gas using a self contained piezo electronic ignition. Each filling with gas will give approximately one and a half hours working time.

Gas Gun

Inc.vat 25.99

Ex.vat 21.66

Code 378079

Electric Gun

Inc.vat 14.90

Ex.vat 12.42

Code 500313

Hot Melt Glue Sticks (Yellow)


Our most popular hot melt adhesive, orange/yellow and flexible with a medium open time of 45 seconds and a very high molten tack or grab. It forms a tough bond on many difficult substrates and is recommended for use on woods, most plastics, ceramics and light gauge metals. Each stick contains approximately 30g of glue, and is 12mm in diameter and 300mm in length.

Bosch PKP 7.2 LI Cordless Li-Ion Glue Gun


With no cable to tie you down you can use this gun almost anywhere. Powered by Li-Ion battery technology that gives a long battery run time (45mins on a single charge) and is protected by electronic cell protection for long battery life. Very compact and light weight at only 300g the glue gun has auto shut off and heat protection, the LED display tells you when temperature is reached and battery level. Takes 7mm glue sticks. Supplied with charging station which acts as stand fitted with drip tray and 4 glue sticks.

1kg 5kg

Inc.vat 9.40 37.90

Ex.vat 7.83 31.58

Code 510036 510037

Cordless Glue Gun

Inc.vat 64.96

Ex.vat 54.13

Code 952303

Arrow TR550 Glue Gun


9
This professional glue gun will take high and low temperature glue sticks, it has a high volume melt chamber and heavy duty circuitry for prolonged use. The large trigger is comfortable in use, fitted with a non-drip nozzle and check valve to control glue flow, it also has a built in drip tray/stand. Takes standard glue sticks 11/12mm.

Hot Melt Glue Sticks (White)


A white adhesive with an open time of 60 seconds and high tack. Suitable for softwoods, board, paper, fabrics and some plastics. Each stick approximately 30g of glue, and is 12mm in diameter and 300mm in length.

Bosch Multi Purpose Hot Melt Glue Sticks 7mm


With strong adhesion and high strength these glue sticks are suitable for various materials such as wood, leather, paper, cardboard and plastic. 7mm diameter and 190mm length, sold in pack of 10.

TR550 Glue Gun

Inc.vat 19.20

Ex.vat 16.00

Code 952319

1kg 5kg

Inc.vat 10.00 40.80

Ex.vat 8.33 34.00

Code 510034 510035

Multi Purpose Hot Melt Glue Sticks (10)

Inc.vat 4.00

Ex.vat 3.33

Code 952304

Pocket Hole Joinery


Pocket hole joinery is all about making strong joints that are fast and easy to produce with a hidden joint. Produced using a jig and drilling a hole at an angle into one workpiece and then joining it to a second workpiece with a self-tapping screw. Speed comes from the fact that the self-tapping screw eliminates the need to pre-drill the mating workpiece. This avoids many alignment problems caused by having to lay out and drill for aligning fasteners as with dowel, biscuit, and mortise and tenon joints. Strength comes from the selftapping screw as an internal clamp, eliminating clamping the joint as the glue dries. Save time and the frustration of clamping, as well as the problems associated with pulling the assembly out of square with clamping pressure. The strength of a pocket hole joint can be explained with two simple statements. First, a mechanical screw has physical properties that make it stronger than a biscuit, dowel or tenon. Secondly, the amount of constant clamping force placed on the joint line by driving the screw combined with todays glue technology makes for an incredibly strong wood-to-wood bond.

Kreg Micro Pocket Hole Jig


The smallest pocket hole jig available. Perfect for 12mm (1/2) material using 19mm pan head screws to secure thinner materials for keeping the head of the screw below your finished surface. The micro jig works with other Kreg jigs. Pocket hole joining is a fast secure fix. Supplied with hex shank micro drill bit and micro pocket depth collar.

Clamp not included

Micro Jig Hex Shank Drill Bit 5\16 19mm x No.6 Gauge (Box 100) Stop Collar for Micro Drill Bit

Inc.vat 37.99 11.50 2.50 1.69

Ex.vat 31.66 9.58 2.08 1.41

Code 212257 212258 212259 952787

Kreg Mini Kit Pocket Hole Jig

Kreg R3 Junior Pocket Hole Jig


The Junior Jig is intended for use where clamping will be more difficult and is great for repair work on already assembled components. Able to work with timbers 12mm to 38mm thick it has 9 position depth settings, adjusted by sliders on the edges for precise positioning of your Kreg screws to lock the joint. Drill depth can easily be selected to material thickness by face clamp protective shoe is provided so that you can use the clamp of your choice from the range now available. This jig is also great for panel work. Supplied with stepped drill bit, 150mm driver bit, depth collar, clamp adaptor, starter screw set, hex key, instruction manual and sturdy carry case.

Full Range of Kreg Screws Available


Please find these listed later in this section

Can be used anywhere, when a cabinet is small or needs restoring. Just about as portable as it gets! Includes one piece step drill bit, depth collar for setting the drilling depth and hex wrench. This jig is designed without an alignment fence, so that it can be clamped at virtually any angle or orientation to the edge of the workpiece.

Mini Jig

Inc.vat 16.75

Ex.vat 13.96

Code 600088

R3 Jig

Inc.vat 34.25

Ex.vat 28.54

Code 701283

338

Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95

Order freephone 0800 371822

Pocket Hole Joinery


Kreg Quick-Kit
This one kit gives you everything you need to switch from drilling pocket holes to driving pocket-screws faster than ever with the precision you would expect from Kreg. It includes a quick change chuck, a hex shank drill bit with depth collar and a 150mm hex shank driver which is the most versatile length for most pocket hole applications.

Quick-Kit
K4 Jig System contains: Kreg Jig, stepped drill bit, portable drill guide, drill guide spacer, 6 square driver, starter screw set, starter plug set, dust adaptor, SkillBuilder DVD, and quick-start guide, all packed in a sturdy carry case

Inc.vat 20.30

Ex.vat 16.92

Code 210812

Kreg Hex Shank Pocket Hole Drill Bit


Made from high speed steel, the one piece Hex-shank Pocket Hole Drill Bit is easy to use in both standard and quick change chucks. There is no need for a round shank bit adaptor with this drill bit. It inserts directly into the Kreg Quick change chuck as well as all other quick release chucks. The hex shank provides improved drilling torque and does not slip in the chuck.

Kreg K4 Jigs
The Kreg K4 and K4MS pocket hole jigs offer 2 packages of all you need to make very strong pocket hole joints, suitable for many applications from furniture making to kitchen fitting and repair work with little effort. The K4MS has more accessories to increase the ability of the jig. The jig body is fitted with a removable drill guide block for benchtop or mobile use, the 3-Hole Drill Guide lets you make perfectly placed Pocket-Holes in a wide variety of material widths and thicknesses (from 1/2 to 1-1/2 in 1/8 increments). Every , Kreg Drill Guide features a hardened steel core which carries a full Lifetime Guarantee. The core shrouds the bit and supports the workpiece through 100% of the drill-stroke, resulting in minimal bit deflection, reduced tear-out, and a clean pluggable PocketHole. The jig body is fitted with a toggle clamp for fast working and a setting guide for the drill bit and screwdriver bit collar depth. On removing the drill guide block you can drill in situ which is great for larger work or when doing repair work on an assembled piece. Available in two set versions

The K4MS System contains a larger range of extra accessories such as a dust shroud, material support stop, face clamp K4MS Jig Master System contains: Kreg Jig Master System, Face Clamp, Portable Base, Drill Guide Spacer, Material Support Stop, Dust Collection Attachment, 3/8 Stepped Drill Bit, 6 Square Driver, 3 Square Driver, Starter Screw Set, Starter Plug Set, QuickStart Guide, SkillBuilderT DVD , all inside a durable carrying case. Also supplied with the Kreg Mini Jig

Pocket Hole Drill Bit Replacement Stop Collar Stepped Drill and Collar for Deck Jig

Inc.vat 12.20 1.69 11.50

Ex.vat 10.17 1.41 9.58

Code 210813 600089 950768

Kreg Square Drive Screwdriver Bits


Kreg square drive screwdriver bits for use with Kreg pocket hole Jigs and Kreg square drive screws. Available in 2 sizes 75mm or 150mm. Packed individually or in a multi pack with one of each. The 150mm is also available in a pack of 2.

K4 Pocket Hole Jig K4MS Master Pocket Hole Jig Kreg Drill Guide Spacer Blocks Work Support and Repeat Stop

Inc.vat 76.00 114.00 6.76 6.76

Ex.vat 63.33 95.00 5.63 5.63

Code 210822 952351 210852 476851

Kreg Pocket Hole Joinery - Trim Carpentry DVD


Gary Striegler

75mm Bit 150mm Bit 150mm Bits (Pkt 2) 1 x 75mm & 1 x 150mm Bits

Inc.vat 0.95 1.70 4.20 3.40

Ex.vat 0.79 1.42 3.50 2.83

Code 510439 510444 477042 702112

Kreg Jig Portable Base


This handy base accepts your Kreg Jig Drill Guide and connects to most Kreg face clamps for portable Pocket Holes almost anywhere. Allows your jig to be used as 2-tools-in-1.

If youre a professional or a serious enthusiast, you owe it to yourself to learn more about Pocket Hole Joinery! Gary Striegler, a homebuilder with over 25 years of experience, demonstrates his time proven techniques for creating classic home projects.

DVD - 120 mins

Inc.vat 6.76

Ex.vat 5.63

Code 477116

Pocket Jig Portable Base Pocket Hole Jig Portable Base Inc.vat 13.55 Ex.vat 11.29 Code 952792

Kreg Pocket Hole Joinery - Building Tables


Sit back and watch woodworker John Sillcoats lead you through the simple steps needed to build a table that starts as a simple leg and rail design, then expands by adding a shelf and finally, pass-through drawers!

Kreg Premium Face Clamps


The Kreg Face Clamps help to ensure a perfectly flush joint every time. Without clamping, the joint can misalign if the screw follows the grain of the wood. To use, place the large pad of the clamp directly over the centre of the joint line on the face side of the workpiece (opposite the pocket holes), clamp with moderate pressure and drive a screw. Three sizes are available: 75mm(3) reach, 150mm(6) reach and 250mm(10) reach.

DVD - 55 mins

Inc.vat 6.76

Ex.vat 5.63

Code 477113

Clamp 75mm(3) Clamp 150mm(6) Clamp 250mm(10)

Inc.vat 19.45 26.99 35.50

Ex.vat 16.21 22.49 29.58

Code 210815 210816 210817

Kreg Drill Guide Block for Pocket Hole Jigs K3 and K4


Drill Guide for Kreg Jig (K4) and Kreg Jig Master System (K3MS or K4MS). Use with or without the portable base. Take one on the road, leave the other in your jig. Features hardened steel drill guides which carry a lifetime warranty.

Kreg Pocket Hole Joinery - Cabinetmaking


John Sillcoats leads you through the various steps needed to build your own custom projects. From cabinets and coffee tables, pocket hole joinery provides a fast, strong and simple approach to tackling your next woodworking project.

Kreg Quick Change Pocket Hole Adaptor


This adaptor enables you to convert your standard 3/8 round shank drill bits to a hex shank. This will speed things up when using a quick change chuck system.

Pocket Jig Drill Guide Drill Guide Block Inc.vat 26.99 Ex.vat 22.49 Code 952791

DVD - 26 mins

Inc.vat 6.76

Ex.vat 5.63

Code 477111

Adaptor

Inc.vat 5.40

Ex.vat 4.50

Code 210814

Order online www.axminster.co.uk/woodjoining

339

Pocket Hole Joinery

Pine

Cherry

Walnut

Oak

Maple

Paint Grade

Kreg Solid Wood Pocket Hole Plugs


Most of the time pocket holes can be placed on the back side or underside of a project where they are hidden from view. From time to time, however, you may find the need to place one in a visible location. Kreg make solid wood plugs in a variety of wood species and paint grade that can be glued in and sanded flush to conceal the hole. Available in quantities of 50.

Kreg DeckJig Kit


This has to be the simplest way to screw down decking, leaving a clean deck finish as the screw heads are concealed. The Kreg DeckJig allows you to drill the hole and screw down the decking in two easy steps. There is a choice of 3 hole positions, each has a hardened steel bush to take the drill then screw. The bush is set at an angle to the edge controlling where the pilot hole and screw are positioned as well as controlling the depth. This jig ensures a strong fix through the edge of the board into the frame every time. The kit is supplied with board spacers 6.3 and 8mm spacing, 100 Protec-Kote screws, operational DVD and case. Kreg weather resistant Protec-Kote or stainless steel screws available.

Kreg KKS2000 Klamp Table & Steel Stand


You dont need an army of clamps to get the job done; you just need the right ones. This Klamp Table is the ultimate helping hand around the workshop for a host of jobs like sanding and routing as well as getting perfectly flush pocket screw joints. The top has 2 tracks, the bench Klamps fit into this and are movable anywhere along these, combined with Klamp blocks which position your work for repeat holding. Table clamp size 550 x 857mm with a tough melamine surface and is supplied with 2 Traks, 2 Bench Klamps and 5 Klamp Blocks. The Universal Steel Stand can be brought with the top or as a separate item, this is height adjustable (687 - 915mm), is made of heavy gauge steel with 4 levelling feet. Castors are also available for the stand these are fitted with dual locking mechanism and extra bench Klamps 75mm and 150mm.

Pine (Pkt 50) Cherry (Pkt 50) Walnut (Pkt 50) Oak (Pkt 50) Maple (Pkt 50) Paint Grade (Pkt 50) Cedar (Pkt 50)

Inc.vat 5.35 5.35 5.35 5.35 5.35 3.80 5.35

Ex.vat 4.46 4.46 4.46 4.46 4.46 3.17 4.46

Code 200806 476969 476973 476971 476970 477191 952788

Inc.vat DeckJig Kit 76.00 Protec-Kote Screws 50mm x No 8 (100) 4.45 Protec-Kote Screws 50mm x No 8 (700) 29.60 Stainless Screws 50mm x No 8 (100) 10.66 Stainless Screws 50mm x No 8 (700) 65.00

Ex.vat 63.33 3.71 24.67 8.88 54.17

Code 950767 950769 950770 950771 950772

9
Light Brown

Almond White Black Brown

Kreg Plastic Plugs


Plastic plugs feature a low profile and tight fit which usually eliminates the need for glue. Available in the five most popular colours - almond, black, brown, light brown and white. New packaged quantities available of 50 and 200 in each colour.

Kreg Deck Driver Bit Set


Replacement screwdriver bit and stop collar for the deck jig, fitted with a hex shank. Supplied with hex key to adjust stop collar.

Light Brown (Pkt 50) White (Pkt 50) Black (Pkt 50) Almond (Pkt 50) Brown (Pkt 50) Brown (Pkt 200) Black (Pkt 200) White (Pkt 200) Almond (Pkt 200) Light Brown (Pkt 200)

Inc.vat 5.35 5.35 5.35 5.35 5.35 19.00 19.00 19.00 19.00 19.00

Ex.vat 4.46 4.46 4.46 4.46 4.46 15.83 15.83 15.83 15.83 15.83

Code 476823 200807 476821 476820 476822 210807 210808 210809 210810 210811

Kreg Deck Driver Set

Inc.vat 3.80

Ex.vat 3.17

Code 952786

Kreg Deck Drill and Stop


This kit contains the replacement stepped drill and stop collar for the Kreg Deck Jig. The drill bit has a 1/4 hex shank. Supplied with hex key.

Stepped Drill and Collar for Deck Jig

Inc.vat 11.50

Ex.vat 9.58

Code 950768 KKS2000 Klamp Table & Stand Klamp Table KS1000 Universal Legstand - KRS1030 Dual-Locking Castor Set (4) Klamp 75mm Reach Klamp 150mm Reach

150mm Long Reach Clamp

Inc.vat 338.50 232.50 139.50 45.65 26.65 31.30

Ex.vat 282.08 193.75 116.25 38.04 22.21 26.08

Code 474102 474166 702127 474938 210818 210819

Kreg KHC Right Angle Pocket Hole Clamp Kreg Corner Clamp
The assembly of drawers, frames and T joints is made easy with this corner clamp from Kreg. It locks the components together securely and accurately while drilling pocket holes. This smart clamp helps to align workpieces in 90 registration. The clamp is designed with a 9.5mm steel pin on one arm that fits down into the pocket hole and anchors the workpiece firmly against the second workpiece. The opposite arm is fitted with a 180 swivelling pad that automatically adjusts to your material dimensions. Finish the joint by driving a screw into the adjacent pocket hole. Also great for assembling box joints.

Kreg Pocket Hole Joinery - Building a Router Table


Accelerate your learning process with one of our pocket hole instructional videos. John Sillaots leads you through the various steps needed to build your own custom projects. From cabinets and coffee tables to building your own router table.

90 Corner Clamp

Inc.vat 31.30

Ex.vat 26.08

Code 210806

Right Angle Clamp

Inc.vat 24.50

Ex.vat 20.42

Code 210826

DVD - 55 mins

Inc.vat 6.76

Ex.vat 5.63

Code 477115

340

Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95

Order freephone 0800 371822

Pocket Hole Joinery


Kreg Router Tables
Please see the routing section for Kreg router tables and accessories.

Kreg Pushstick
Unlike other push sticks this comes with a whole set of features that make each cut more convenient than ever before.

Pushstick

Inc.vat 12.20

Ex.vat 10.17

Code 210821

Kreg Klamp Blocks


Fast and easy alignment. Contains 5 Klamp Blocks. The easiest way to quickly bring your project into alignment and centre your Bench Klamp on the joint line. Includes 5 plastic blocks and mounting hardware. Comes with Klamp Blocks for easy clamping from 38 to 75mm (1.1/2 to 3) in 12.7mm (1/2) increments.

Pocket Hole Machines


When your production needs have outpaced the manual Kreg Jigs, look for the added speed and convenience of the Foreman Pocket Hole Machinery, these allow you to build frames very fast. We offer a range of bench and floor standing, semi or fully automatic single or dual holes. Please refer to our website for further information.

Klamp Blocks

Inc.vat 12.70

Ex.vat 10.58

Code 476621

Kreg DK1100 FE Automatic Floor Standing Electric Pocket Hole Machine


Floor standing electric, fully automatic pocket hole boring machine Powered by 1100W electric motor 100psi of air pressure required for holddown clamp and forward motion cylinder Hardened steel drill guide to maximize drill bit life Single spindle with one-touch, foot pedal operation Ability to centre a screw in 12.7 to 38mm thick material Swing stops for optimized material positioning Dust collection chute for efficient chip removal Overall size 610 x 595 x 1260mm, table top height 1000mm

Kreg Klamp Trak


Turn the entire length of your workbench into a clamping station. Comprises an 850mm(33.3/4) aluminum extrusion. There are three main methods for installing Klamp Trak. With all three methods, the goal is to leave the top of the Klamp Trak flush with the benchs surface. How you intend to use your Klamp Trak will determine the best choice for your specific situation. Rout into edge of workbench, add a 19mm(3/4) surface to the top of your workbench or place between two staggered pieces of 19mm(3/4) plywood.

DK1100FE Machine Cobalt Drill Bit

Inc.vat Ex.vat 2,809.50 2,341.25 26.65 22.21

Code 702317 475101

Trak 850mm

Inc.vat 37.99

Ex.vat 31.66

Code 475077

Kreg Trak System


For more products within the Kreg Trak System please see the Routing Section

Kreg Foreman Pocket Hole Machine


Semi-Automatic pneumatic, small workshop solution Lever operated, one second cycle time 12mm to 38mm thick material capacity Fast, semi-automatic operation; automatic hands-free clamping Quiet 3/4hp pneumatic drill motor with lever operated drill stroke Reliable, one-step drilling operation; drills flat-bottom, roundsided pocket hole that can be plugged Stable work surface with easily adjustable swing-stop material positioning guides Hinged-top that allows easy access to drill bit and motor

Kreg DK1100FP Automatic Floor Standing Pneumatic Pocket Hole Machine


Floor standing, entirely pneumatic powered, fully automatic pocket hole boring machine Centre a screw in 12.7 to 38mm (1/2 to 1.1/2) thick material Hardened steel drill guide to maximize drill bit life One step drilling operation, foot pedal operation Swing stops for optimized material positioning 110-120psi is recommended (80 to 150psi rated) 1.1/4hp direct drive pneumatic motor Dust collection chute for efficient chip removal Overall size 610 x 595 x 1260mm, table top height 1000mm

Kreg Bench Klamps


75mm Reach Clamp

Pocket Hole Machine

Inc.vat 770.50

Ex.vat 642.08

Code 701398

150mm Long Reach Clamp

DK1100FP Machine Cobalt Drill Bit


Bench Clamp system

Inc.vat Ex.vat 2,719.50 2,266.25 26.65 22.21

Code 474020 475101

Heavy Duty bench Clamp System

The most popular Bench Klamp consists of a 75mm reach clamp and a 75 x 100 x 6mm(3 x 4 x 1/4) thick hard-anodized aluminium insert plate. Insert plates are also sold separately and can be routed into your workbench to add multiple clamping locations. The second version, the Large Bench Klamp, consists of a 75mm reach clamp and a 250 x 250 x 6mm(10 x 10 x 1/4) thick steel plate that can also be used as a stand alone clamping fixture. A long reach clamp is also available that can be used with either of the insert plates.

Kreg DK1100 TP Fully Automatic Bench Top Pneumatic Pocket Hole Machine
Bench top unit, entirely pneumatic powered, fully automatic Single spindle, can centre a screw in 12.7 to 38mm thick material Hardened steel drill guide to maximize drill bit life Swing stops for optimized material positioning One-touch, foot pedal operation Housed in a compact cabinet, can be built into a work surface Dust collection chute for efficient chip removal Compressor with 110-120psi capacity is recommended to power the unit

Kreg DK3100 3-Spindle Floor Standing Electric Pocket Hole Machine


3 spindles, drill 2 pocket holes at once across rails of varying widths Single pocket holes can also be drilled Fast easy set up, drills 2 pocket holes in a second Centres a screw in 12.7 to 38mm thick material Spindle centres 19mm, 25.4mm and 38mm Hardened steel drill guide to maximize drill bit life One-touch, foot pedal operation Swing stops for optimized material positioning Dust collection chute for efficient chip removal

Klamp 75mm Reach Klamp 150mm Reach 75mm Klamp and 75 x 100mm Plate H/D Klamp System, 75mm Klamp and 250 x 250mm Plate. 75 x 100mm Plate

Inc.vat 26.65 31.30 35.50 54.95 11.00

Ex.vat 22.21 26.08 29.58 45.79 9.17

Code 210818 210819 210820 210825 200805

DK1100TP Machine Cobalt Drill Bit

Inc.vat Ex.vat 2,539.50 2,116.25 26.65 22.21

Code 474021 475101

DK3100 Floor Standing 240V Cobalt Drill Bit

Inc.vat Ex.vat 3,539.50 2,949.58 26.65 22.21

Code 702316 475101

Order online www.axminster.co.uk/woodjoining

341

Kreg Screws
Pack of 10 Titanium Nitride Coated Square Bits
Material: Choose from standard steel screws, stainless steel or Blue-Kote screws. Kreg Blue-Kote screws are treated with three chemically combined anti-corrosion layers to give them up to 400% more weather resistance compared to zinc plated screws. Making them the ideal choice for garden and patio furniture, as well as for general exterior construction. Thread Type: The fine thread screw suits hardwood i.e. oak, maple, walnut, cherry etc. The coarse thread screw has a larger thread diameter and provides greater holding power for plywood, MDF, melamine and pine. Head Style: All Kreg screws use square drive. Washer Head style is the most popular as it provides the largest amount of surface area to seat firmly in the bottom of the pocket, especially for plywood or pine. The large Washer Head assures that the screw is not overdriven in the bottom of the pocket. The Pan Head style is slightly smaller in both the head and shank diameter than the Washer Head screw and is a good alternative if both workpieces are hard woods. The Pan Head style is also of benefit in the 25mm length as it allows you to join 13mm material to 13mm material and easily seat the screw head below flush.

Kreg Washer Head Screws Coarse Thread)


25mm x No. 8 Gauge (Box 100) 25mm x No. 8 Gauge (Box 500) 25mm x No. 8 Gauge (Box 1,000) 25mm x No. 8 Gauge (Box 5,000) 32mm x No. 8 Gauge (Box 100) 32mm x No. 8 Gauge (Box 500) 32mm x No. 8 Gauge (Box 1,000) 32mm x No. 8 Gauge (Box 5,000) 38mm x No. 8 Gauge (Box 100) 38mm x No. 8 Gauge (Box 500) 38mm x No. 8 Gauge (Box 1,000) 50mm x No. 8 Gauge (Box 50) 50mm x No. 8 Gauge (Box 250) 50mm x No. 8 Gauge (Box 3,000) 62mm x No. 8 Gauge (Box 50) 62mm x No. 8 Gauge (Box 250) 62mm x No. 8 Gauge (Box 2,000) Inc.vat 2.65 10.66 18.25 76.96 2.75 11.20 18.95 82.50 2.99 12.46 21.30 2.15 8.70 71.50 2.99 11.20 65.95 Ex.vat 2.21 8.88 15.21 64.13 2.29 9.33 15.79 68.75 2.49 10.38 17.75 1.79 7.25 59.58 2.49 9.33 54.96 Code 486305 486313 486306 486314 486307 610867 486308 486309 486315 486317 486316 486324 486322 486323 486326 610869 486325

These square drive bits have high torsion shanks that gives added torque at the point of drive, for driving Kreg screws. Titanium nitride coated for wear resistance. Supplied in packs of 10.

Square Driver (Pkt 10)

Inc.vat 5.99

Ex.vat 4.99

Code 950126

Kreg Pan Head Screws (Fine Thread)


19mm x No.6 Gauge (Box 100) 25mm x No.6 Gauge (Box 100) 25mm x No.6 Gauge (Box 500) 25mm x No.6 Gauge (Box 1,000) 25mm x No.6 Gauge (Box 5,000) 32mm x No.6 Gauge (Box 100) 32mm x No.6 Gauge (Box 500) 32mm x No.6 Gauge (Box 1,000) 32mm x No.6 Gauge (Box 5,000) 38mm x No.6 Gauge (Box 100) 38mm x No.6 Gauge (Box 500) 38mm x No.6 Gauge (Box 1,000) Inc.vat 2.50 2.65 10.66 18.25 76.96 2.75 11.20 18.95 82.50 2.99 12.46 21.30 Ex.vat 2.08 2.21 8.88 15.21 64.13 2.29 9.33 15.79 68.75 2.49 10.38 17.75 Code 212259 610871 476200 475465 474481 477422 476199 475466 474480 477423 476201 475467

Material Thickness Use 25mm screws to join 13mm to 19mm thick timber, 32mm screws to join 19mm, 38mm screws to join 22 to 32mm, 50mm for 32 to 35mm timber and 62mm long screws to join 38mm thick workpieces.

A B C

Kreg Pan Head Screws (Coarse Thread)


25mm x No.8 Gauge (Box 100) 25mm x No.8 Gauge (Box 500) 25mm x No.8 Gauge (Box 1,000) Inc.vat 2.65 10.66 18.25 Ex.vat 2.21 8.88 15.21 Code 610868 810472 475464

Kreg Washer Head Screws (Hi-Lo Dual Thread)


Inc.vat 32mm, No.7 Hi-Lo, Washer Head (Box 100) 2.75 Ex.vat 2.29 Code 952790

A Extra metal in head eliminates head snapping off. B Deep square drive prevents driver jumping out. C Dri-lube finish reduces driving torque needed. D Sharp edge of self-tapping tip drills a cleaner pilot hole. E Large washer head stops when it hits bottom of the hole. F Case hardened steel screw. F G Needle sharp point minimises walking.

Kreg Square Drive Screwdriver Bits


Washer Head style
G

Kreg Blue Kote Weather Resistant Screws Washer Head (Coarse Thread)
32mm x No.8 Gauge (Box 100) 32mm x No.8 Gauge (Box 1,000) 32mm x No.8 Gauge (Box 5,000) 38mm x No.8 Gauge (Box 100) 38mm x No.8 Gauge (Box 1,000) 50mm x No.8 Gauge (Box 50) 50mm x No.8 Gauge (Box 250) 50mm x No.8 Gauge (Box 3,000) 63mm x No.8 Gauge (Box 50) 63mm x No.8 Gauge (Box 250) 63mm x No.8 Gauge (Box 2,000) Inc.vat 3.70 25.66 98.95 4.00 27.76 2.65 9.95 82.50 3.40 12.46 71.50 Ex.vat 3.08 21.38 82.46 3.33 23.13 2.21 8.29 68.75 2.83 10.38 59.58 Code 477226 475085 474416 477200 475041 477483 476113 474499 477388 475984 474647

Kreg square drive screwdriver bits for use with Kreg pocket hole Jigs and Kreg square drive screws. Available in 2 sizes 75mm or 150mm. Packed individually or in a multi pack with one of each. The 150mm is also available in a pack of 2.

Pan Head style

75mm Bit 150mm Bit 150mm Bits (Pkt 2) 1 x 75mm & 1 x 150mm Bits

Inc.vat 0.95 1.70 4.20 3.40

Ex.vat 0.79 1.42 3.50 2.83

Code 510439 510444 477042 702112

Kreg Screw Kit SK03


This screw kit from Kreg is a great way to buy a popular assortment of 750 screws in the following sizes of 150 each: 24.5mm(1) fine thread Pan Head, 24.5mm(1) coarse thread Pan Head, 31.7mm(1.1/4) fine thread MaxiLoc, 31.7mm(1.1/4) coarse thread Maxi-Loc and 75 off 63.5mm(2.1/2) coarse thread Maxi-Loc (Blue-Kote). Please note Blue-Kote screws offer excellent weather resistance.

Kreg Washer Head Screws (Fine Thread)


32mm x No.7 Gauge (Box 100) 32mm x No.7 Gauge (Box 500) 32mm x No.7 Gauge (Box 1,000) 32mm x No.7 Gauge (Box 5,000) 38mm x No.7 Gauge (Box 100) 38mm x No.7 Gauge (Box 500) 38mm x No.7 Gauge (Box 1,000) Inc.vat 2.75 11.20 18.95 82.50 2.99 12.46 21.30 Ex.vat 2.29 9.33 15.79 68.75 2.49 10.38 17.75 Code 486333 610870 486334 486335 486336 486338 486337

Kreg Stainless Steel Screws for Maritime Application, Washer Head (Coarse Thread)
32mm x No.8 Gauge (Box 100) 32mm x No.8 Gauge (Box 1,000) 38mm x No.8 Gauge (Box 100) 63mm x No.10 Gauge (Box 50) 63mm x No.10 Gauge (Box 250) Inc.vat 11.26 85.00 12.46 15.40 62.00 Ex.vat 9.38 70.83 10.38 12.83 51.67 Code 476053 474390 475910 475575 474546

SK03 Kit

Inc.vat 22.85

Ex.vat 19.04

Code 610643

342

Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95

Order freephone 0800 371822

Festool Unique DOMNIO Jointing System


The DOMINO is a unique jointing system using rounded loose tenons to join timber giving very strong accurate and precise joints. Combining exceptional versatility with simple handling for maximum precision, the DOMINO has a patented routing principle with a wide range of adjustment options to make it extremely easy to use. Fully adjustable fences allow you to cut single or a series and central or offset holes with perfect alignment. The first DOMINO cut is exact, subsequent holes with a small amount of play allow for the joint to be aligned effortlessly. The result is a stable joint, secure from the first dowel. The DOMINO has a special shape combined with expanding glue pockets and lateral/longitudinal grooves to give the dowel a secure grip. There are two models available the DF500 or bigger brother the DF700.

Kreg Stainless Steel Screws for Maritime Application, Washer Head (Fine Thread)
32mm x No.8 Gauge (Box 100) 32mm x No.8 Gauge (Box 1,000) 32mm x No.8 Gauge (Box 5,000) Inc.vat 11.86 88.96 450.95 Ex.vat 9.88 74.13 375.79 Code 475967 474375 474085

Support bracket in use giving extra stability

Kreg Blue Kote Screw Kit


By popular demand, here is a weather resistant pocket hole screw kit from Kreg. The kit includes 450 screws of five popular sizes in a durable easy -to-carry case which is perfect for outdoor projects. Named BlueKote, these screws tested at more than 400% more weather resistant than zinc plated screws. Sizes included are: 31.7mm(1.1/4) coarse thread x 100, 38mm(1.1/2) coarse thread x 100, 50mm(2) coarse thread x 100 and 63.5mm(2.1/2) coarse thread x 150.

Festool DOMINO DF 500 Q-Plus & DF 500 Q-Set Jointing Machine


The DF500 is suitable for a host of jointing tasks in solid timber and manmade boards, use to make frames and panels, providing a strong joint overcoming many difficult jointing problems. Cabinet making, shop fitting and the home workshop will all benefit. Cut a DOMINO dowel up to 10mm x 50mm in length mm (25mm pocket) 5 pre set timber thicknesses and manually adjusted for other thicknesses, 5 pre set angles and is also infinitely variable between 0 and 90. There are retractable stops for accurate positioning from the edge of the workpiece. There are 6 different sizes of DOMINO available. Available as either Plus or Set versions both supplied with DOMINO and SYS 3 T-LOC Systainer case: Q-Plus complete with the D5 cutter and support bracket. Q-Set complete with D5 cutter, support bracket, trim stop and cross stop.

Stop positions for hole centres 16, 20, 22, 25, 28 & 40mm Depth stops at 12,15, 20, 25 and 28mm Mitre range 0 -90 Height adjustment with scale 5-30mm Accepts cutter sizes: 4,5,6,8 and 10mm Model Rating Power Speed Dust Extraction Weight DF 500 Q-Set Industrial 420W 24,300rpm 3.2kg DF 500 Q-Plus Industrial 420W 24,300rpm 27mm outlet 3.2kg

Screw Kit

Inc.vat 30.46

Ex.vat 25.38

Code 210824

Kreg ProtecKote Decking Screws


For use with the Kreg deck jig, these Protec-Kote screws have three weather resistant layers for protection against corrosion. Use for laying decking and other outside applications. 50mm (2) x No. 8 gauge. Available in packs of 100 or 700.

Inc.vat Domino DF 500 Q-Plus Jointer 240V 674.40 Domino DF 500 Q-Set Jointer 240V 730.80 Domino Cutter 4mm 27.12 Domino Cutter 5mm 24.00 Domino Cutter 6mm 24.00 Domino Cutter 8mm 25.03 Domino Cutter 10mm 28.16

Ex.vat 562.00 609.00 22.60 20.00 20.00 20.86 23.47

Code 574256 931722 211259 493490 493491 493492 493493

Inc.vat Protec-Kote Screws 50mm x No 8 (100) 4.45 Protec-Kote Screws 50mm x No 8 (700) 29.60

Ex.vat 3.71 24.67

Code 950769 950770

Festool DOMINO DF500 Dowel Packs Kreg Stainless Steel Decking Screws
Stainless steel screws for use with the Kreg deck jig, these screws provide the very best long term protection against corrosion. Use for laying decking and other outside applications. 50mm (2) x No. 8 gauge. Available in packs of 100 or 700. Beech wood dowels for use with the Festool DF 500 DOMINO Jointing Machine. There are 6 different sizes of DOMINO available.

Domino in use (fitted with extraction hose not supplied)

Stainless Screws 50mm x No 8 (100) Stainless Screws 50mm x No 8 (700)

Inc.vat 10.66 65.00

Ex.vat 8.88 54.17

Code 950771 950772

Dowels 4 x 20mm (Pkt 450) Dowels 5 x 30mm (Pkt 300) Dowel 5 x 30mm (Pkt 1,800) Dowels 6 x 40mm (Pkt 190) Dowel 6 x 40mm (Pkt 1,140) Dowels 8 x 40mm (Pkt 130) Dowel 8 x 40mm (Pkt 780) Dowels 8 x 50mm (Pkt 100) Dowel 8 x 50mm (Pkt 600) Dowels 10 x 50mm (Pkt 85) Dowel 10 x 50mm (Pkt 510)

Inc.vat 11.47 11.47 58.43 11.47 58.43 11.47 58.43 11.47 58.43 11.47 58.43

Ex.vat 9.56 9.56 48.69 9.56 48.69 9.56 48.69 9.56 48.69 9.56 48.69

Code 211260 931282 493296 931283 493597 931284 493298 931285 493299 931286 493300

Festool DOMINO Assortment 1060 & T-LOC Systainer (DF 500)


An assortment of DOMINO beech wood dowels plus 4, 5, 6, 8 and 10mm cutters for the DF 500 DOMINO machine. Includes 1,060 DOMINO dowels in the following sizes altogether in a Festool SYSTAINER T-LOC case: 4mm x 20mm, 5mm x 30mm, 6mm x 40mm, 8mm x 40mm, 8mm x 50mm and 10mm x 50mm.

Dowel and Cutter Set in T-LOC

Inc.vat 161.50

Ex.vat 134.58

Code 501843

Order online www.axminster.co.uk/woodjoining

343

Festool Unique DOMNIO Jointing System

Festool DOMINO XL DF700 Beech Dowel Packs & Sipo Beech Dowel Rods
Beech wood dowels for use with the Festool XL DF 700 DOMINO Jointing Machine. Solid beech in 8 different sizes and also available special weatherproof Sipo solid beech wood dowel rods, resistant to insects and mould, and especially made for exterior applications. Cut to length to suit. Sipo are in 750mm lengths.

Festool DOMINO XL DF 700 Jointing Machine Set


9
The bigger brother to the DF 500, the DF 700 will cut larger DOMINO holes, giving the same precision and features, it is perfect for making strong joints in furniture, door construction and many other solid wood projects. It will cut a DOMINO 14mm x 140mm in length (70mm pocket) with quick adjustment for different material thickness, taking cutter sizes 8, 10, 12 and 14mm. It has a variable depth stop (15-70mm) and a tilting fence (0-90) DOMINO dowels are available in solid beech or Sipo dowels for exterior use that are mould and insect resistant. Stop position for hole centres: 10, 15, 20, 25, 30 and 40mm Depth stops: 15-70mm Mitre range 0 -90 Height adjustment with scale 10-50mm Accepts cutter sizes: 8,10,12 and 14mm Supplied as a set version complete with: D12 cutter, support bracket, 20 x beech DOMINO dowels 12 x 100mm and Systainer T-LOC case SYS 5.
Retractable stops for accurate positioning from edge of the workpiece

Graduated fence for mitre jointing.

Beech Dowel 8 x 80mm Pkt 190 Beech Dowel 8 x 100mm Pkt 150 Beech Dowel 10 x 80mm Pkt 150 Beech Dowel 10 x 100mm Pkt 120 Beech Dowel 12 x 100mm Pkt 100 Beech Dowel 12 x 140mm Pkt 90 Beech Dowel 14 x 100mm Pkt 80 Beech Dowel 14 x 140mm Pkt 70 Sipo 8 x 750mm Dowel Rod Pkt 36 Sipo 10 x 750mm Dowel Rod Pkt 28 Sipo 12 x 750mm Dowel Rod Pkt 22 Sipo 14 x 750mm Dowel Rod Pkt 18

Inc.vat 30.25 30.25 30.25 30.25 30.25 30.25 30.25 30.25 84.52 82.43 78.31 78.31

Ex.vat 25.21 25.21 25.21 25.21 25.21 25.21 25.21 25.21 70.43 68.69 65.26 65.26

Code 501640 501641 501642 501643 501644 501645 501646 501647 501652 501653 501654 501655

Accurate large stable fences

Model Rating Power Speed Weight

XL DF 700 Set Industrial 720W 21,000rpm 5.2kg

Festool XL DOMINO Assortment & Cutters D8 & D10


For the XL DF 700 jointer, an assortment of 214 DOMINO solid beech wood dowels and two XL cutters 8 and 10mm. Packed in a Festool T-LOC Systainer SYS2 case. Contains the following DOMINO sizes: 8 x 50mm pack of 50, 8 x 80mm pack of 36, 8 x 100mm pack of 36, 10 x 50mm pack of 40, 10 x 80mm pack of 26 and 10 x 100mm pack of 26.

XL DF 700 DOMINO Jointer 230V 8mm XL DOMINO Cutter 10mm XL DOMINO Cutter 12mm XL DOMINO Cutter 14mm XL DOMINO Cutter

Inc.vat 937.20 34.43 36.52 37.56 40.69

Ex.vat 781.00 28.69 30.43 31.30 33.91

Code 501632 501636 501637 501638 501639

Inc.vat XL DOMINO Assortment & D8, D10 Cutters, T-LOC Case 147.12

Ex.vat 122.60

Code 501634

Thin pieces from 12mm can be connected.

Festool DOMINO XL DF700 Dowel Cutters

Festool XL DOMINO Assortment & Cutter D14


For the XL DF 700 jointer, an assortment of 128 DOMINO solid beech wood dowels and XL 14mm cutter. Packed in a Festool TLOC Systainer SYS2 case. Contains the following DOMINO sizes: 12 x 100mm pack of 40, 12 x 140mm pack of 40, 14 x 100mm pack of 16 and 14 x 140mm pack of 32.

Inc.vat
Fully supporting fence Precise rail jointing

Ex.vat 106.08

Code 501635

XL DOMINO Assortment & D12, D14 Cutters, T-LOC Case

127.30

344

Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95

Order freephone 0800 371822

Dowelling Jigs
Festool DOMINO Machine accessories DF500 and DF700
Various accessories increase the versatility of the DOMINO: Cross stop which is a simple right angle bracket that attaches to the base of the Domino with two thumb screws, this can be used to add surface area to the face of the Domino to increase stability during use. Trim stop to help align narrow wooden strips between 22 and 70mm centrally, plus it can also be used for mitre cuts. Cross stop, which is used for repeat hole spacing between 100 and 205mm without the need for marking the work. Handrail fence which has been designed for use on round workpieces with a diameter of 35 - 60mm. This fence attaches to the tilting base on the jointer without the need for tools and long holes can be routed quickly for the Domino dowels, which are suitable for both straight and mitred joints. Additional stop for reducing dowel centre from 37 to 20mm. This can be used to add surface area to the face of the Domino to increase stability during use ( Fits DF500 only)
Accessories shown fitted to machines

Wolfcraft Universal Dowelling Jig


An alloy jig with hardened steel bushes which will produce E, L and T joints with either 6mm, 8mm or 10mm dowels. Somewhat different to the Dowelmaster in that it has a clamp included which allows the work to be accurately located and drilled for greater degrees of accuracy. The jig is supplied complete with two clamps to ensure that the work cannot move when clamped and is equally spaced, especially useful when drilling large boards. Best used with a lip and spur dowel drill and depth collar, all-round accuracy in work up to 30mm thick.

Dowel Points & Bits


Dowel points provide a means of accurately transferring the position of holes. The best type of drill to use is a lip and spur bit. Also available are drill collars to accurately gauge the depth of the drilled hole.

Dowelling Jig

Inc.vat 50.50

Ex.vat 42.08

Code 910384

Axminster No.1 Dowelling Jig


Use to form either E or L joints in timber up to 32mm(1.1/4) thick. Constructed from heavy aluminium extrusions sliding on steel bars and the bushes are made from hardened steel and are replaceable. A clamp is provided on the main part of the jig for holding the timber during drilling and also a second clamp for securing the boards together whilst the position of the jig is being adjusted. Holes are drilled in both boards at the same setting so an accurate line-up is guaranteed. This jig produces an excellent result. Accommodates 6mm, 8mm and 10mm dowel holes. Supplied with hardened steel bushes for 6mm, 8mm and 10mm dowels.

4 of Points 6mm 4 of Points 8mm 4 of Points 10mm Drill & Collar 6mm Drill & Collar 8mm Drill & Collar 10mm Collars 6, 8 & 10mm Colt 6mm Drill Bit Colt 8mm Drill Bit Colt 10mm Drill Bit Drill, Collar, Points & 26 Dowels 6mm Drill, Collar, Points & 24 Dowels 8mm Drill, Collar, Points & 20 Dowels 10mm Dowel 6mm x 30mm, (Pack 200) Dowel 6mm x 30mm, (Pack 1,000) Dowel 8mm x 40mm, (Pack 150) Dowel 8mm x 40mm, (Pack 900) Dowel 10mm x 40mm, (Pack 120) Dowel 10mm x 40mm, (Pack 960)

Inc.vat 1.25 1.48 1.70 4.99 5.50 6.55 1.99 1.01 1.15 1.51 5.20 5.99 6.55 5.90 26.50 6.30 33.95 6.40 46.20

Ex.vat 1.04 1.23 1.42 4.16 4.58 5.46 1.66 0.84 0.96 1.26 4.33 4.99 5.46 4.92 22.08 5.25 28.29 5.33 38.50

Code 910378 910379 910380 910368 910369 910370 910371 702576 702578 702579 910381 910382 910383 910372 910373 910374 910375 910376 910377

Trim Stop Cross Stop Handrail Fence Additional DF Stop

Inc.vat 35.47 35.47 30.25 17.74

Ex.vat 29.56 29.56 25.21 14.78

Code 493487 493488 701449 211253

No.1 Dowelling Jig Replacement Bushes

Inc.vat 37.55 10.36

Ex.vat 31.29 8.63

Code 410233 410234

Dowelling Jigs
The dowel is perhaps the simplest way of forming a joint, whether edge, butt, lap, tee or mitre joint. All that is required is the accurate marking and drilling of the holes to take the dowel. Jigs are designed to make the jointing process as accurate as possible. In order to help with the selection of the most suitable jig for the job, the various types of dowelled joint are shown above. Each of the jigs listed has an indication of which of these joints it can produce.

Drilling with the bush fitted into a homemade template, the bush is reversed for mirrored holes

Veritas Dowel Cutters


Use as a pencil sharpener to make accurate tenons Use a cordless drill and square socket to produce longer lengths of accurate dowel Carbon-steel blade in the plated zinc-alloy body Works equally well in soft, green or hard woods Sizes available 3/8(9.5mm), 7/16(11mm) & 1/2(12.7mm) Dowel Cutters made in Canada

Axminster 12mm Drill Guide Bush


Use to make your own drilling jig, great for accurate drill positioning especially dowelling. This two part threaded drill guide can be fixed into a piece of MDF by boring a 20mm hole in the jig and screwing the guide bush in place. Drill a 12mm dowel hole, unscrew and reposition on the opposite side to drill the mirror hole for accurate dowelling. The jig is used as a positioning guide, more than one guide bush can be used. Suitable for duplicate holes, the simple design of this guide makes it ideal for many tasks including aligning dowels when jointing worktops. Sold individually. Suitable for the Lamello Invis invisible clamping system.

3/8 (9.5mm) 7/16 (11mm) 1/2 (12.7mm)

Inc.vat 26.86 26.86 26.86

Ex.vat 22.38 22.38 22.38

Code 202380 202381 202382

Lie-Nielsen Dowel Plates


The right tool to choose if you wish to make exact sized dowels from any solid timber. The dowel plate is a rectangle 130mm(5.1/8) x 38mm(1.1/2), 6.3mm(1/4) thick of surface ground A-2 cryogenically treated tool steel, a very humble looking but nonetheless a very precise tool. The holes are machined with a 6 clearance on the underside but are straight for the first 0.025 The . tool can be sharpened many times without any change in the size of the holes, but quite frankly at 60 Rockwell it is doubtful whether it will ever need sharpening. Both metric and imperial plates are available, to cut 3mm, 4mm, 6mm, 8mm, 10mm, 12mm & 16mm dowels or 1/8 3/16 1/4 5/16 3/8 1/2 & 5/8 in imperial , , , , , sizes. A leather wallet to protect your dowel plate is also available.

12mm Threaded Guide Bush (1)

Inc.vat 5.95

Ex.vat 4.96

Code 952355

Wolfcraft Dowelmaster Jig


A simple jig and extremely easy to use, suitable for producing E, L and T joints with either 6mm, 8mm or 10mm dowels in material up to 30mm thick. Simply hold the jig in place and place the drill bit in the correct sized hardened steel drill bush for an accurate joint every time. One benefit of the Dowelmaster over other jigs is that it automatically positions the hole in the centre of the timber.

Tenon Cutters
For full details please refer to the Drilling Section

Dowelmaster Jig

Inc.vat 19.25

Ex.vat 16.04

Code 910385

Metric Dowel Plate Imperial Dowel Plate Dowel Plate Wallet

Inc.vat 43.40 43.40 13.00

Ex.vat 36.17 36.17 10.83

Code 421066 421065 100746

Order online www.axminster.co.uk/woodjoining

345

Dowelling Jigs
Beechwood Dowelling, 1 Metre Lengths Miller Dowel Joinery Kits
Mini Kit c/w 100 Birch Dowels Standard Kit c/w 40 Birch Dowels Large Kit c/w 50 Birch Dowels Mini Dowels Birch (100) Mini Dowels Oak (100) Mini Dowels Walnut (100) Mini Dowels Cherry (100) Standard Dowels Birch (40) Standard Dowels Oak (40) Standard Dowels Walnut (40) Standard Dowels Cherry (40) Standard Dowels Birch (100) Standard Dowels Birch (500) Standard Dowels Cherry (100) Standard Dowels Oak (100) Standard Dowels Oak (500) Standard Dowels Walnut (100) Large Dowels Birch (40) Large Dowels Oak (40) Large Dowels Walnut (40) Large Dowels Cherry (40) Large Dowels Birch (500) Large Dowels Cherry (100) Large Dowels Oak (100) Large Dowels Walnut (100) Mini Stepped Drill Bit Standard Stepped Drill Bit Large Stepped Drill Bit

High quality beech dowelling in 1 metre lengths, plain or fluted. A question often asked is why have flutes? This is to allow the passage of air and excess glue out of the hole as you insert the dowel to avoid compression.

Drill with required size Miller Bit

Glue and insert stepped dowel

Tap dowel home

3mm Plain (Pack 5) 4mm Plain (Pack 5) 5mm Plain (Pack 5) 6mm Plain (Pack 5) 8mm Plain (Pack 5) 10mm Plain (Pack 5) 12mm Plain (Pack 5) 14mm Plain (Pack 5) 16mm Plain (each) 18mm Plain (each) 20mm Plain (each) 25mm Plain (each) 6mm Fluted (Pack 5) 8mm Fluted (Pack 5) 10mm Fluted (Pack 5) 12mm Fluted (each) 14mm Fluted (each) 16mm Fluted (each)

Inc.vat 3.80 3.80 3.80 4.00 5.80 5.30 6.60 9.20 2.20 3.76 4.00 6.25 4.00 5.80 7.85 1.99 2.75 3.35

Ex.vat 3.17 3.17 3.17 3.33 4.83 4.42 5.50 7.67 1.83 3.13 3.33 5.21 3.33 4.83 6.54 1.66 2.29 2.79

Code 719922 719923 719924 719925 719926 719927 719928 719930 510380 510381 510382 510383 719931 719932 719933 510387 510388 510389

Make strong precise joints with speed and ease, use for making furniture and cabinets. The innovative stepped and ribbed form of these dowels (or maybe they should be called wooden nails) keeps the glue where you want it, in the joint, without the problem of compression experienced in ordinary dowel joints. The ribs grip the sides of the stepped pockets as they swell with the glue to lock them in place. The procedure is simple: Clamp or hold together the pieces to be joined. Drill the stepped hole with the Miller TruFit drill bit. Spread a thin layer of glue on the ribbed section. Tap the dowel into the hole until fully seated. Trim off and sand level - Miller dowels are self capping TOP TIP for an interesting effect, use a Miller Dowel which contrasts with the host timber Available in three sizes, the starter packs are complete with a unique stepped drill bit for an exact fit and a supply of the Birch dowels. Mini Kit (6.5 diam. x 41.5) for timber 12 - 14mm thick. Standard Kit 1X (10.5 diam. x 70mm) for timber 16 - 25mm thick. Large Kit 2X (12.8 diam. x 90mm) for timber up to 32mm thick. Dowels packs available for each size in Birch, Cherry, Oak or Walnut.

Inc.vat 18.25 21.30 25.00 10.70 12.85 18.76 17.30 6.70 8.00 10.45 9.90 15.35 69.00 23.26 18.46 83.99 24.65 8.15 10.15 13.30 12.16 85.96 28.96 23.86 31.75 9.95 16.40 18.76

Ex.vat 15.21 17.75 20.83 8.92 10.71 15.63 14.42 5.58 6.67 8.71 8.25 12.79 57.50 19.38 15.38 69.99 20.54 6.79 8.46 11.08 10.13 71.63 24.13 19.88 26.46 8.29 13.67 15.63

Code 300589 300590 300060 300503 300534 300558 300504 300480 300435 300459 300411 475640 474515 475244 475432 474411 475191 300497 300442 300466 300428 474397 475042 475190 474966 476813 476062 475760

Accurate hole alignment using reference pins Basic Kit

Drill bush is reversed for mating hole to be drilled

Duo kit, simply reverse bushes and align guide pins for the perfect joint

Lamello Rasto Drilling Jig Basic Kit


A very clever jig that allows you to very accurately position holes and mirror on an opposite member if required for dowelling. Simple to look at and use the secret is in the precision with which the jig has been made that ensures accurate hole position every time. A network of holes in the jig and pins are used as reference stops against your work so no matter what the shape the hole position can be repeated. Simply choose the correct drill bush and screw this into the jig so that it will guide your drill bit. Once drilled, remove pins and bushes, relocate in the same holes, protruding from opposite side of the plate, this then guides the plate and drill in place for an exact mirror hole position. Available in two formats: Basic Kit contains; 1 Drill plate, 3 guide pins, 4 drill guides 6, 8 10 and 12mm and fixing screw. We recommend using the Colt Twinland drill bits with this jig and stop collars, available separately. Duo Kit contains; 2 Drill plates, 6 guide pins, 4 drill bits 5, 8, 10 and 12mm diameter with stop collars and 8 guide bushes, jointing bar and length stop all packed in a Systainer case for storage.

Duo kit for simple repeatable alignment of two dowel holes

Duo Kit

Jig Basic Kit 12mm Drill Bit Collars 6, 8 & 10mm Jig Duo Kit

Inc.vat 102.50 2.20 1.99 307.50

Ex.vat 85.42 1.83 1.66 256.25

Code 212514 702581 910371 212604

346

Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95

Order freephone 0800 371822

Dowelling Jigs Lamello Invis the Invisible Connector


Invis the totally invisible joint that requires no glue or screws, is very strong and can be dis-assembled at any time Invis is a very clever 2 part connector that will totally revolutionise the way you work and overcome many jointing problems, no need to clamp, no visible signs on your work and take apart whenever you need with the special MiniMag drive box. Working like a dowel it is in 2 parts with a central male and female thread and a coarse outer thread which is screwed into a pre-bored hole. Bring the two components together and using the special MiniMag box in a power drill, lay this horizontal to the joint and forward spin to tighten the connector together resulting in a solid joint. To disassemble reverse the drill and undo simple, quick and easy. Both the stud and joiner stay flush with the joint edge so no damage can occur in transport. The Lamello Rasto drill jig is designed to be used when drilling Invis connectors, this simple and easy to use jig requires no marking or measuring for precision jointing every time, working like magic.
The rotating field of the Invis driver pulls the connector together resulting in a solid joint

Biscuit Jointers

Lamello MiniMag Mx & Driver Bit


The MiniMag Mx houses the rotating magnetic that drives the jointing connectors of the Lamello Invis system, attaching to any standard drill and running at between 120 - 1500rpm. Supplied with a special screwdriver bit to screw the Invis connectors into the drilled holes. Spare driver bits also available.

MiniMag Mx & Driver Bit Invis Mx Screw Driver Bit

Inc.vat 80.50 11.95

Ex.vat 67.08 9.96

Code 212605 212612

Makita 3901 Biscuit Jointer 240V


Precise sliding action Easy locking fence Tilting base 20mm maximum depth of cut, suitable for flush cuts Rack and pinion adjustment 590W motor Spindle lock for easy blade change Dust bag Supplied complete with dust bag, saw blade and carrying case. Model Rating Power Tilting Base Dust Extraction Weight 3901 Industrial 590W Yes Dust Bag 2.8kg

Lamello Invis Connectors


A range of Invis connectors Invis MX Connector Set A stud and jointing element, both 12mm in diameter with a coarse outer thread that will bite into the drilled 12mm hole. The internal threaded stud is 14mm in length and the threaded jointing element is 30mm. Invis Jointing Element The jointing element is the female part of the Invis connector. Invis MX Stud Long 30mm connector with stud for a stronger hold in materials like particle boards. Invis MX Centre Wall Stud Longer version of the standard 14mm studded part of the Invis connector and allows the jointing of two items such as shelves through a maximum 30mm upright. 30mm of the stud length is not threaded and left plain. Invis Pinlock This is a pin lock device, instead of using the 2 part Invis connector this has a retractable pin that is driven by the MiniMag MX. Suitable for fitting wall and ceiling panels, access holes, plinths and infills. Hole for fitting 8 x 41mm, hole for pin 5 x 12mm. Invis Connecting Screw M5 x 17mm connecting screw with left hand thread for use with the Invis stud.

3901 Jointer 240V

Inc.vat 284.95

Ex.vat 237.46

Code 600361

Worktop jointing, the connector bites as it is driven into the Joint

Lamello Invis Mx Starter Kit with 20 connectors


The Invis starter kit contains the special MiniMag MX driver that attaches to any power drill running speed 12001500rpm with accessories and fittings. Supplied with; MiniMag Mx magnetic driver, two driver bits, flexi shaft for tight corners, 20 Invis connectors and storage case

Starter Kit with 20 Connectors

Inc.vat 231.95

Ex.vat 193.29

Code 952354

Connector Set Pkt of 20 Invis Jointing Element pack 30 Invis Mx Stud 30mm Pkt 10 Centre Wall Stud 30mm Pkt 10 Invis Pinlock Pack 10 Invis Connecting Screw Pkt 30

Inc.vat 83.50 104.99 30.40 35.99 17.60 8.26

Ex.vat 69.58 87.49 25.33 29.99 14.67 6.88

Code 950893 501845 212610 212609 950329 501844

Bosch GFF 22A Biscuit Jointer 240V


Smooth plunging action Easy locking tilting fence 670W motor Easy access to depth settings Blade lock for easy blade change Pre set depth stops for 0, 10 and 20 biscuits Supplied complete with dust bag and carrying case. Model GFF 22A Rating Industrial Power 670W Tilting Base Yes Dust Extraction Dust Bag / 19mm outlet Weight 2.9kg

Lamello Invis Mx Flexi Shaft


Fitting between the MiniMag Mx and your drill allowing you to get into small areas and angles with the drill away from the work surface.

Dovetail Jigs
For full details on Dovetail Jigs please refer to sub section Dovetail Jigs in the Routing section

Invis Mx Flexi Shaft

Inc.vat 31.25

Ex.vat 26.04

Code 212611

GFF22A Jointer 240V

Inc.vat 299.95

Ex.vat 249.96

Code 500306

Order online www.axminster.co.uk/woodjoining

347

Biscuit Jointers Lamello


Lamello are known as the experts in biscuit jointing with over 50 years of experience and are the originators of the biscuit joint. Lamello have developed a range of biscuit jointers and jointing connectors making a complete system to satisfy the needs of anyone needing to joint material. Based in Switzerland the Company is dedicated to precision and innovation developing the very latest techniques for the perfect joint.

Positive stops on angle setting 22.5, 45, 67.5and 90

Lamello Classic C3 Biscuit Jointer


Professional machine, ultra smooth Very accurate precise fence adjustment Tilting fence with extensions Blade lock Positive stops on angle setting 22.5, 45, 67.5and 90 6 depth pre sets Side scribing TCT blade for clean and precise cuts Model Rating Power Tilting Base Dust Extraction Weight Classic C3 Industrial 705W Yes 23mm outlet 3.5kg

Multifuntional square stop

Classic C3 Biscuit Jointer 240V

Inc.vat 360.50

Ex.vat 300.42

Code 952642

Blade can be adjusted for height

Lamello TOP21 Biscuit Jointer Lamello Classic C3 Biscuit Jointer Systainer Kit
Kit version contains C3 Jointer, 1,000 Biscuits (20s), Minicol Glue Dispenser, Swiss Army Penknife and Systainer Carry Case Professional machine, ultra smooth Good Woodworking No.1 Best Buy Very accurate Tilting base Blade lock Positive stops on angle setting 22.5, 45, 67.5and 90 6 depth pre sets Side scribing TCT blade for clean and precise cuts Model Rating Power Tilting Base Dust Extraction Weight Classic C3 Industrial 705W Yes 23mm outlet 3.5kg The ultimate biscuit jointer Electronic motor control for soft start and no fall off in speed irrespective of the load Zero slack in plunging action Height adjustment plus or minus 2.0mm x 0.1mm Ability to adjust to exact centre of workpiece Fences with flush sides and precision square locking Extending front fence with detents at 22.5, 45, 67.5 and 90 Square fence for extra stability on certain cuts Blade with scoring teeth for clean and precise cuts Step memory system Efficient dust extraction through base Supplied with dust bag, 2 x hose connectors, fence slip plate Solid beech storage case The TOP21 is an upgraded version of the TOP20 fitted with a newly designed base and fences for even greater precision ensuring the ultimate in biscuit jointing from the inventors of the biscuit jointer Lamello. Precise in every way, it is very easy to set cutter and fences for exact placement on your work, the cutter can be adjusted for height as well as having 6 preset depth settings. The fences on the TOP21 have been redesigned so that they are flush on the sides for easier positioning; the angle stop/extending front fence is for mitre joints 0-90 with detents 22.5, 45, 67.5 and 90, the square fence stop is used for stability and runs parallel locking squarely with a quick lever. The soft start 800W electronic motor has no fall off in speed irrespective of the load, the plunge action is extremely smooth, the blade has scoring teeth for the cleanest cutting action. Overall this has to be the ultimate jointer available today. The machine is supplied with: dust bag, 2 dust extraction connectors 23 and 36mm, fence slip on plate 4mm, tool kit and solid wooded beech storage case. Model TOP21 Rating Industrial Power 800W Tilting Base Yes Dust Extraction Dust Bag / 23mm outlet Weight 3.3kg

Jointer Kit 240V Jointer Kit 110V Suction set 2mm Slip On Plate

Inc.vat 622.50 622.50 51.50 26.45

Ex.vat 518.75 518.75 42.92 22.04

Code 200606 200607 121810 702313

DeWalt DW682K Biscuit Jointer

The DW682K is powered by a 600W industrial rated motor. The adjustable fence can be angled and locked anywhere in its 90 arc of travel and raised or lowered on a smooth running rack and pinion type mechanism with micro-adjustable depth control. Blade depth is controlled by a four position turret, with three presets for 0, 10 and 20 biscuits. The fourth position gives the maximum cutting depth of 20mm for grooving, further increasing the jointers versatility. Anti-slide grippers, eight guide notches and a fence window all help positioning for accuracy. Supplied with carry case and dust bag. Model Rating Power Tilting Base Dust Extraction Weight DW682K Industrial 600W Yes Dust Bag 3kg

DW682K Jointer 240V

Inc.vat 194.95

Ex.vat 162.46

Code 610737

TOP21 Biscuit Jointer 240V TOP21 Biscuit Jointer 110V

Inc.vat 912.00 912.00

Ex.vat 760.00 760.00

Code 952713 952714

348

Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95

Order freephone 0800 371822

Accessories
Lamello Biscuits
Lamello precision biscuits are made from pressed solid beech to a very high standard and hold their tolerance. The biscuits are slightly compressed in manufacturing, so that on contact with the glue they expand tightly into the joint. Standard sizes are: No. 0 - 47 x 15 x 4mm, No. 10 - 53 x 19 x 4mm and No. 20 - 56 x 23 x 4mm.

Joint secured with key only a 6mm hole is visible

Lamello Clamex P Connector for Zeta


This is a truly amazing connector with a host of uses. Lamello have overcome many design assembly problems with this clamping connector; it is almost totally invisible, only a single 6mm hole shows. The Clamex P is a biscuit shaped fitting with a T profile that slides in place, no screws or glue are needed. Having a pivot lever and two alignment studs, this lever is driven using a hexagon key though the 6mm hole, locking the fitting together forming a very secure joint. The required slot is cut using a Lamello Zeta biscuit jointer specially developed for this application, cutting the slot and adding the T to the bottom using a unique vertical mechanical drive. Overall length is 66mm, each half has a depth of 14.5mm, it is 7mm in width (10mm o/a with T). Supplied as a pack of 80 or 300.

Inc.vat 400 Mixed (240 x 20s, 80 ea 10s & 0s) 26.75 1000 Mixed (500 x 20s, 250 ea 10s & 0s)49.85 No. 0 Biscuits (Pkt 80) 4.99 No. 10 Biscuits (Pkt 80) 4.99 No. 20 Biscuits (Pkt 80) 4.99 No 0 (Box 1,000) 31.45 No 10 (Box 1,000) 32.30 No 20 (Box 1,000) 32.99

Ex.vat 22.29 41.54 4.16 4.16 4.16 26.21 26.92 27.49

Code 610920 600113 144500 144510 144520 340944 340946 340948

Cutting the Clamex P slot

Lamello S6 Large Biscuit


The largest Lamello biscuit is the S6, 85mm in length and 30m in width. Having the same thickness as the 0, 10 and 20 biscuits of 4mm, this larger biscuit will give greater strength for larger items. Sold in packs of 40 or 1,000.

Drilling the 6mm hole for the hex key with the jig

Slot in the Clamex P connector

Lamello Zeta T-Slot Biscuit Jointer


Unique dual function biscuit jointer Produces special T slot for Clamex P joiners Can also be used as standard biscuit jointer Clamex P fitting is almost totally concealed Clamping fitting that overcomes many design problems Offering more than a standard biscuit jointer, the Zeta has an undercut function to allow for the fitting of special concealed Clamex P connectors that slide into the T slot produced. The connector also clamps, so no additional clamping methods are required. Almost totally concealed; the only visible sign is a single 6mm hole, making it ideal for many applications such as furniture, shop fitting and exhibitions. It is also suitable for solid wood and manmade boards, overcoming many design issues. Unique to Lamello, the jointer has a special vertical mechanical drive (VMD) engaging when the jointer is at full plunge, moving the cutter up and down in one full turn and only then disengaging to produce the T slot. The undercut function can be switched off and a 7mm slot will be produced, a Bisco biscuit can then be used. Replace the special blade with a 4mm biscuit blade and use as a standard biscuit jointer. As with all Lamello, product design and build are of the highest quality. Other features include precise plunge with clear depth setting, jointer fences with flush sides to make positioning simple, the fence fits with vee grooves for accuracy and clear angle scale. The jointer is supplied in a set with a special 7mm blade, 18 pairs of Clamex, drill bit, drill stop collar, drill guide, suction adaptor and wooden box. Model Zeta Rating Industrial Power 800W Tilting Base Yes Dust Extraction Yes Weight 3.7

Pack 80 Pack 300 Clamex P Connectors Pack 1000

Inc.vat Ex.vat 135.95 113.29 449.50 374.58 1,269.50 1,057.92

Code 950817 950818 950890

Box 40 Box 1,000

Inc.vat 4.99 69.50

Ex.vat 4.16 57.92

Code 202274 202276

Lamello Bisco P Biscuit


The Bisco can be used as an aligning or jointing biscuit, designed to work with the Clamex P Zeta connectors, it is 7mm in thickness fitting the slot produced by the Zeta biscuit jointer. This plastic biscuit is 65mm in length x 27mm wide and 7mm thick and can be glued in place if required.

Lamello H9 Small Biscuits


H9 are smaller than normal biscuits, 38 x 12mm and thinner at only 3mm. They require a 78mm diameter cutter.

Clamex P Connectors - Pack 80 Clamex P Connectors - Pack 300

Inc.vat 20.56 63.50

Ex.vat 17.13 52.92

Code 950870 950871

Box 250 Box 1,000 H9 Blade for 3.0mm biscuits

Inc.vat 14.40 34.80 97.50

Ex.vat 12.00 29.00 81.25

Code 202275 144009 132009

Accessories

Lamello Glue Dispenser


Designed to dispense the glue into the groove with no mess, a glue dispenser is a very useful accessory for any biscuit jointer. Two types are offered. The MINICOL glue dispenser consists of a non slip base and a glue bottle with a nozzle specifically shaped to fit the groove. After use the bottle is put back into the base which seals the nozzle, preventing blockage and drying out of the glue. The DOSICOL glue dispenser is a pump action bottle with a nozzle shaped to fit the groove exactly. The pump can be adjusted to dispense precisely the required amount of glue. Supplied complete with stand.

Leo European Wooden Beech Biscuits


The European made Leo biscuit is made to a high standard from compressed beech, designed to uniformly expand when in contact with glue to fit tightly into a biscuit slot and give a strong firm biscuit joint. Available in packs of 1000 and in two sizes; No. 10 (53 x 19 x 4mm) or No. 20 (56 x 23 x 4mm)

Biscuit Jointer 240V Blade For Lamello Zeta Jointer Clamex P Connectors - Pack 80 Clamex P Connectors - Pack 300

Inc.vat 1,189.50 101.50 20.56 63.50

Ex.vat 991.25 84.58 17.13 52.92

Code 950816 952761 950870 950871

No 10 (Box 1000) No 20 (Box 1000)

Inc.vat 21.35 21.35

Ex.vat 17.79 17.79

Code 211264 211265

Minicol Dispenser Dosicol Dispenser

Inc.vat 35.15 67.96

Ex.vat 29.29 56.63

Code 600497 410156

Order online www.axminster.co.uk/woodjoining

349

Accessories
Titebond Glues
Please find our range of glue at the beginning of this section

Lamello Clamping Plates K20


A very clever red plastic biscuit with barbs moulded onto the surface. They are used in standard No. 20 biscuit slots for dry assembly of joints as a fitting aid for giving workpieces which are difficult to clamp. Used in conjunction with wooden Lamello biscuits, the barbs ensure a secure fit for the plates in the joint.

Lamello Champ Slide Biscuit Connectors


This Champ biscuit can be used as a concealed self clamping connector, in conjunction with wooden biscuits as a gluing aid or on its own. It will help with the assembly of mitres, corners and other various joints without the need for clamps. For thin material from 14mm in wood and wood composites. Supplied in packs of 50 pairs with installation template.

Supplied in boxes of 250 plates Clamping Plates (Box 250) Inc.vat 60.50 Ex.vat 50.42 Code 600112

Box 50

Inc.vat 43.60

Ex.vat 36.33

Code 211261

Lamello Self Clamping Biscuit E20H


Lamello have produced yet another innovative approach to the glued joint. This is a self clamping insert which pulls together and holds the timber components while the glue cures. Using the same configuration as the number 20 biscuit the insertion slot is produced with your biscuit jointer. The biscuit / insert is made from glass fibre reinforced plastic for rigidity and durability and is hammered home dry. The specially shaped barbed ridge creates the clamping action and locks the components together to form a mitre, T and butt joint. The E20H measures 27 x 23 x 4mm and is suitable for timber deeper than 35mm. Supplied in a pack of 80.

Lamello Clear Plate C20


Special alignment plates made for joining composite manmade materials, such as Corian or Varicor etc. They are made from translucent plastic, size 60 x 23 x 4mm, equivalent to a No.20 biscuit.

Box 250

Inc.vat 39.70

Ex.vat 33.08

Code 510271

Lamello Simplex KD Fittings


The Lamello Simplex system is an aluminium jointing element designed for any application where the joint may need to be taken apart from time to time, such as radiator concealments, screens or furniture parts etc. The size of the joint to be cut is identical to that of a No. 20 biscuit. The special insertion tool is recommended. These fittings should be glued into the recess using a 2 part Epoxy glue.

Inc.vat Lamello Self Clamping Biscuit E20H (Pkt 80) 27.80

Ex.vat 23.17

Code 701334

Lamello Fast Clip In Biscuit Connector


Simple to use this plastic biscuit simply clips together and can be used as a concealed connector, suitable for example, when boxing in pipe covers, as it can be detached. Connector has self cutting edges so all that is needed is to tap connector into biscuit slots and push joint together. Most suitable for soft wood and some wood composites. Supplied in packs of 50 pairs of connectors, installation tool and a clip for cutting depth.

Available in boxes of 50 or 100 pairs Inc.vat Simplex (50 Pairs) 57.50 Simplex (100 Pairs) 104.99 Simplex Insertion Tool 21.85

Ex.vat 47.92 87.49 18.21

Code 166101 600115 600111

Box 50

Inc.vat 42.70

Ex.vat 35.58

Code 211263

Lamello Self Clamping Biscuit E20L


Lamello have produced yet another innovative approach to the glued joint. This is a self clamping insert which pulls together and holds the timber components while the glue cures. Using the same configuration as the number 20 biscuit the insertion slot is produced with your biscuit jointer. The biscuit / insert is made from glass fibre reinforced plastic for rigidity and durability and is hammered home dry. The specially shaped barbed ridge creates the clamping action and locks the components together to form a mitre, T and butt joint. The E20L measures 56 x 11.5 x 4mm and is suitable for material in excess of 50mm wide. Supplied in a pack of 80.

Lamello Metal Heavy Duty Slide Biscuit Connector

Connector screwed in place

Lamello Duplex Hinges


Handed both right hand and left hand, these curved hinges exactly match the curvature of the biscuit jointer blade. With the construction of a simple jig, placement of hinges need take only seconds. The hinges are exceptionally quick to fit. Supplied in boxes of 20 singles (10 R/H & 10 L/H). Available in Brass or Nickel.

This heavy duty metal biscuit can be used as a concealed self clamping connector, for detachable construction such as pipe covers. Clamps are not required as the joint is slid into place and held with the metal lugs. An integral stop can block one side if required. Screwed into place, the biscuit has an adjustable joint pressure. For material from 18mm in wood and wood composites, supplied in packs of 40 pairs connectors, 83 screws of each size 3 x 13mm and 3 x 25mm and a clip for cutting depth.

Supplied in boxes of 20 singles (10 R/H & 10 L/H) Brass (10L & 10R) Nickel Plated (10L & 10R) Inc.vat 68.95 49.00 Ex.vat 57.46 40.83 Code 166003 100905

Self Clamping Biscuit E20L (Pkt 80)

Inc.vat 27.80

Ex.vat 23.17

Code 701335

Box 40

Inc.vat 66.50

Ex.vat 55.42

Code 211262

350

Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95

Order freephone 0800 371822

Accessories
Lamello Clamex Pro Kit
Timber not included

500214

500387

500396

500397

Axminster Glue Bottles


Axminster Glue Bottles are designed to give you all the benefits of more expensive glue applicators at a much reduced price. Theyre well made and will give good service when used with the PVA and aliphatic resin groups of wood and craft glues. There are four bottles, each dedicated to a particular type of glue application: Roller - This lays glue over flat surface areas via a glue feed roller. Biscuit Jointer - With a head to match the radius of the biscuit jointers blade, it will deliver glue accurately into the pocket for all sizes of biscuit. Dowel and Biscuit Jointer - With a side ejection nozzle that will feed glue to the sides of the holes for dowels in excess of 10mm diameter and the pockets for standard width biscuits. Brush - With a brush on the head for a more conventional type of application. All four bottles come complete with closures to keep the glue fresh.
Cut 8mm groove

Lamello Clamping Set


A high quality, fast acting clamping system with protective corners that remove any potential to damage the work in any way. Each corner piece is made of rounded section aluminium extrusion (60mm wide) which acts to spread the load. Onto each extrusion is fitted an elevating corner piece that allows the strap to be passed around the corners without getting in the way. Tension is applied with a clamping bar that tucks in under the strap once full tension has been attained. The kit is supplied with 2 x 8m long tension straps, 4 x 600mm extrusions and 1 pair of tension hooks.

Drill 6mm hole

Roller Bottle Biscuit Bottle Dowel Glue Bottle Brush Bottle

Inc.vat 2.40 2.56 2.56 3.25

Ex.vat 2.00 2.13 2.13 2.71

Code 500214 500387 500396 500397

Clamping Set 120mm Profiles - Set 4

Inc.vat 195.50 52.96

Ex.vat 162.92 44.13

Code 175020 175401

Lamello Clamex S Detachable Connectors


Aligning, connecting and detachable the Clamex connector is very clever, no need for glue and only a small 6mm hole visible on the whole joint the Clamex system is a great way to joint. Cabinet makers, joiners, carpenters, interior fitters, shop and exhibition fitters and people in the furniture industry would all benefit from using Clamex. These are repeatable, detachable connections without noticeable wear. When on site there is minimal assembly time with full prefabrication possible. It is stackable with no protruding parts on the surface and is easy and efficient to install. There are no additional positioning parts such as dowels or tongues required. No torsional movement due to aligning studs. Tolerance lateral 0,5 mm (max. 0,75 mm) No torsional movement due to aligning studs. Made of fibre-glass reinforced plastic with a zinc die-cast alloy lever. Size 66 x 29 x 9mm. Groove can be cut with your biscuit jointer fitted with the Clamex HW blade.

Tighten Screw

Connect & Finished

This kit contains everything you need for your biscuit jointer as well as jigs and a starter pack of Clamex connectors to make the unique Lamello Clamex S joints. The Clamex jointing element is made up of two halves and aligns and connects at the same time, it can be detached if required so is invaluable for certain projects. All that shows on the assembled joint is a single 6mm hole to allow the hex key to lock and unlock the joint. The kit contains: Jointing blade HW with reversing blades (100mm x 8mm x 22mm bore) 18 pairs Clamex, drilling jig for 35 - 90 with drill bit, marking jig, 1 hex key and 75 screws Accessories available separately Drill jig - For angled joints to drill for locking mechanism, angles 35 - 90 includes drill bit. Clamex jointer Blade - Carbide tipped (TCT) Reversing blade for 8mm groove, 100 x 22 x 8 mm. Cover caps - Simple push fit covers to help hide the 6mm hole for

Lamello G2A Minispot

Clamex S fitted before assembly

Inc.vat Clamex Pro Kit 257.50 S Kit - Box of 18 Pairs, Metal Latch 35.95 Drill jig for 35 - 90 angles including drill 98.95 S Kit - Box of 80 Pairs, Metal Latch 135.95 Drill jig and HW-Reversing blades cutter 235.96 Clamex HW - Reversing Blades Cutter 148.50 Spax Pozi Pan Head Screws 3 x 16mm (Box 200) 3.00 Covercaps Beech (Pkt 100) 6.25 Covercaps Black (Pkt 100) 6.25 Covercaps Brown (Pkt 100) 6.25 Covercaps Pine (Pkt 100) 6.25 Covercaps White (Pkt 100) 6.25

Ex.vat 214.58 29.96 82.46 113.29 196.63 123.75 2.50 5.21 5.21 5.21 5.21 5.21

Code 718713 211284 702329 211285 702311 702314 210568 210581 210579 210580 210582 210578

The G2A Minispot is a milling machine for patching of resin galls, cracks and damaged edges in a variety of timbers, producing practically invisible results. Resin galls and other damage in the wood can be easily and neatly removed with the Lamello Minispot machine, and a matching Minispot patch glued into place. Minispot patches are available in the most common wood types: beech, pine or oak. Size 22 cutter is available to cut two patches at a time. The Multibox contains 12 packs of 50 Minispot patches (size 2).

Minispot 240V Minispot MultiBox Size 2 Size 2 Pine Patches 500 Size 22 Cutter

Inc.vat 825.50 144.00 67.50 544.50

Ex.vat 687.92 120.00 56.25 453.75

Code 111702 156580 150302 132209

Order online www.axminster.co.uk/woodjoining

351

Accessories
Patch cut Patch filled

Minispot Biscuit Jointer Blade Size 2


Size 2 patch

Lamello Minispot Wooden Patches


Patches for the Minispot biscuit jointing blade. Each wooden patch has a maximum length of 65mm x 8mm wide that tapers and 13mm deep, Available in Pine, Oak and Mahogany.

Allowing for almost invisible repairs, this blade will fit biscuit jointers and allow you to patch repair such things as sap pockets and splits. Cutting a special tapered slot with a maximum length of 65mm x 8mm wide that tapers and 13mm deep. You then insert a Lamello patch and plane/sand flush. Less plunge depth of the blade will result in a shorter repair. The 100mm disc has 4 tungsten carbide industrial cutting teeth, its anti-kick back design ensures safety and its balance and design cleanly cuts. The disc has a 22mm bore. Patches are available in either Pine, Oak or Mahogany.

No.2 Oak (50) No.2 Mahogany (50) No.2 Pine (100)

Inc.vat 23.70 19.96 22.75

Ex.vat 19.75 16.63 18.96

Code 211797 211798 502874

Lamello Invis
Unique jointing system, makes a totally secure invisble joint that can also be taken apart if required. Please refer to the dowelling section for more information.

Size 2 Cutter for Mini Spot Patches

Inc.vat 154.50

Ex.vat 128.75

Code 132217

Axcaliber Biscuit Jointer Blade


This Axcaliber 100mm 8 tooth biscuit jointer blade has TCT blades to produce an accurate biscuit slot. With a 22mm bore, this will fit almost all known biscuit jointers. A high quality blade for trade or professional use.

Axcaliber Biscuit Jointing Router Cutter Sets


A unique biscuit jointing set that is truly universal, accepting Numbers 0, 10 and 20 biscuits both singly or in pairs for extra strength when making tenon type joints in thicker material. The complete sets comprise 2 x 4mm groovers, 3 x bearings, (one for each of the biscuit sizes) and a 6.3 spacer. Available with either 1/4(6.35mm) or 1/2(12.7mm) shanks. Overall diameter 40mm. Cutter thickness 4mm.

Lamello Biscuit Jointer Blade


This Lamello tungsten tipped blade is a top of the range industrial quality blade for trade or professional use. 100mm x 22mm bore.

Biscuit Jointer Blade

Inc.vat 15.76

Ex.vat 13.13

Code 951585

Axcaliber Indexing TCT Biscuit Jointer Blade


This biscuit jointer blade has separate indexable blades for both the depth and sides of the cut. This produces a cut without any tears, allowing the biscuit dowel to fit perfectly each time. Each blade has four cutting tips and is replacable when required. An ideal blade for production purposes, maintaining a perfect cut each time.

Cutter Set - S=1/4(6.35mm) Cutter Set - S=1/2(12.7mm) No. 0 Biscuits (Pkt 80) No. 10 Biscuits (Pkt 80) No. 20 Biscuits (Pkt 80) 400 (240 x 20s, 80 ea 10s & 0s)

Inc.vat 43.40 43.40 5.40 5.40 5.40 28.60

Ex.vat 36.17 36.17 4.50 4.50 4.50 23.83

Code 666001 666080 144500 144510 144520 610920

Blade

Inc.vat 88.50

Ex.vat 73.75

Code 132000

Lamello Zeta Jointer Blade


Blade for the Lamello Zeta jointer, tungsten carbide tipped groove cutter, 100mm x 7mm x 22mm bore.

Disposable Tooth Cutter 100 x 4 x 22mm Z4


Disposable Tooth Cutter 100 x 4 x 22mm Z4 for use with the Lamello TOP20S4 Biscuit Jointer.

Indexing TCT Biscuit Jointer Blade

Inc.vat 106.50

Ex.vat 88.75

Code 501058

Blade For Lamello Zeta Jointer

Inc.vat 101.50

Ex.vat 84.58

Code 952761

Inc.vat Disposable Tooth Cutter 100 x 4 x 22mm Z4 296.00

Ex.vat 246.67

Code 132001

Enjoy a course
at the Skill Centre
352
For information regarding courses or to purchase course vouchers please contact Vicky Turner on 0800 9751905 www.axminsterskillcentre.co.uk

Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95

Order freephone 0800 371822

Вам также может понравиться