Академический Документы
Профессиональный Документы
Культура Документы
The Axminster Skill Centre, located at our head office in Axminster Devon, is home to a newly expanded range of instructional courses for aspiring craft workers and hobbyists alike. Woodturning, engineering, routing and woodcarving courses are available.
Inc.vat 149.00
Ex.vat 124.17
Code 510485
20
Inc.vat 79.00
Ex.vat 65.83
Code 600069
595
6mm(1/4)
Inc.vat 20.15
Ex.vat 16.79
Code 600031
Grooving Gouge
1.5mm(1/16) Inc.vat 22.55 Ex.vat 18.79 Code 600047
20
596
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Long Skew Long Skew Edge Short Skew Double Sided Curved Edge Round Neck Straight Edge Straight Blade Skew Edge Set of 6 Knives
Inc.vat 11.95
Ex.vat 9.96
Code 200112
A teacher of modern and traditional methods of woodcarving for nearly 30 years, Dick Onians passes on to aspiring carvers his vast knowledge and experience of the subject.
Code 952964
Set of 12
Inc.vat 32.95
Ex.vat 27.46
Code 700294
Inc.vat 35.80
Ex.vat 29.83
Code 951147
1.5mm No.1 Straight Chisel 1.5mm No.1 Curved Chisel 1.5mm No.2 Skew Chisel 1mm No.3 Straight Gouge 1mm No.6 Straight Gouge 0.5mm No.11 Straight Gouge 1mm No.11 Straight Gouge 1.5mm No.11 Straight Gouge 2mm No.11 Straight Gouge 1.5mm No.39 Straight Vee 1.5mm No.39 Curved Vee
Inc.vat 21.90 23.60 21.90 23.60 23.60 25.30 23.60 21.90 20.20 21.90 23.60
Ex.vat 18.25 19.67 18.25 19.67 19.67 21.08 19.67 18.25 16.83 18.25 19.67
Code 600056 600055 600057 600058 600059 600060 600061 600062 600063 600067 600068
20
12 Piece Set
Inc.vat 27.80
Ex.vat 23.17
Code 502501
Waterstone Set
Inc.vat 20.30
Ex.vat 16.92
Code 384025
597
This step-by-step beginners guide, written by well-known character carver Peter Berry, takes the uninitiated through six simple figure projects, both relief and in the round. Although written with the Flexcut user in mind, any type of chisel can be used.
Book - Pb 13 pages
Code 800350
Mallet Set
Inc.vat 184.50
Ex.vat 153.75
Code 474266
Single Bevel Long Point Yoko Single Bevel Short Curve Maru Double Bevel Curve Keiryu Double Bevel Double Curve Tsurugi Single Bevel Reverse Curve Mikazuki Single Bevel Skew Moroha
Inc.vat 89.50
Ex.vat 74.58
Code 600409
Starter Set
Inc.vat 89.00
Ex.vat 74.17
Code 200670
Flexcut SK108 Starter Carving Set (20 Piece) Japanese Carvers Files
These files are ideal for carvers, cabinetmakers, toy makers, musical instrument makers and sculptors. With safe edges, theyre useful for fine tuning joints. Rasps produce sawdust, files make filings (dust), an Iwasaki file produces miniature shavings. Like a rasp, an Iwasaki file removes material very quickly but the resulting surface is much smoother, requiring only a little sanding to finish. The secret lies in the shape of the teeth, milling and chemical etching produces a sharp edge with real bite. Diagonal grooves stagger the teeth and the shape of each tooth acts like a mini chip-breaker, minimising clogging. The half-round files have teeth only on the convex side. The tooth pitch of the fine file is 1.6mm and 1.2mm for the extra fine. All our Iwasaki files have beech wood handles fitted, made in Japan. SK108 Starter Carving Set is our most complete carving set all in one box. It has everything you need, whether it be for mallet, palm, or knife carving. It contains the SK100 ABS Quick Connect Handle, KN12 Cutting Knife, SK103 Quick Connect Power Handle, Flexcut SlipStrop and Compound, 16 Carving Tools, Wooden Storage Box and DVD version of Relief Carving in A Different Light. The added SlipStrop Gold Compound and owners manual is the key to keeping them all sharp. There is even a place to store an optional adaptor for using these tools with a Bosch or Skil power carver. The 16 gouge profiles featured in this kit are not included in any other SK carving set.
Carving Set
Inc.vat 142.00
Ex.vat 118.33
Code 702084
20
Japanese Carvers File Flat Fine 150mm Japanese Carvers File Flat Fine 200mm Japanese Carvers File Flat Extra Fine 150mm Japanese Carvers File Flat Extra Fine 200mm Japanese Carvers File Half-Round Fine 150mm Japanese Carvers File Half-Round Fine 200mm Japanese Carvers File Half-Round Extra Fine 150mm Japanese Carvers File Half-Round Extra Fine 200mm
Starter Set
Inc.vat 107.50
Ex.vat 89.58
Code 600408
Inc.vat 31.99
Ex.vat 26.66
Code 952573
598
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Scraper Set
Inc.vat 42.55
Ex.vat 35.46
Code 951174
Flexcut have produced this multi-bladed pocket carving tool which they describe, quite justifiably, as a complete carving kit in your pocket. Perfect for carving any time or anywhere. - Right-handed Carvin Jack is the ultimate for portability, wherever you are, or whenever you have time to carve. - Left-handed Carvin Jack The use of the knife (right or left) should be chosen by how you carve, not necessarily by if you are left or right handed. Choose a right-handed knife if you are right handed and carve with the blade towards you. If you carve away from yourself, choose a lefthanded knife. Left-handers should choose the inverse.
Right-Handed Left-Handed
Inc.vat 11.99
Ex.vat 9.99
Code 810478
Inc.vat 65.50
Ex.vat 54.58
Code 211046
Whittlin Jack
Inc.vat 43.15
Ex.vat 35.96
Code 952591
2 Quick connect Ash handle for detail work. Interchangeable with any unhandled palm tool. Tool not included.
Palm Handle
Inc.vat 11.99
Ex.vat 9.99
Code 475411
20
SK103 Quick Connect Power Handle for mallet work. This 115mm(4.1/2) Ash handle has the same ease of inserting and removing the tool as our other QC handles. Its added length allow for greater power for larger tools. Fits any unhandled palm tool. Tool not included.
Inc.vat 112.00
Ex.vat 93.33
Code 211045
Pocket Jack
Inc.vat 67.96
Ex.vat 56.63
Code 951173
Power Handle
Inc.vat 11.99
Ex.vat 9.99
Code 476344
599
Detail Carving
Flexcut Starter Knife Set
Flexcut have put together the perfect package to get you started in carving with knives. These knives are made with the same edge-holding properties as their gouges and chisels and come honed and ready for use. The comfortable curved ergonomic handle allows for long periods of carving without hand fatigue. Set includes: Cutting Knife (KN12), Detail Knife (KN13) and Roughing Knife (KN14) and a block of polishing compound to maintain a razor edge. All the tools you will need to create the intricate geometric or freestyle patterns that are the hallmark of the craft of chip carving. Lettering is also very much part of this art form and the decorating of small boxes or other trinkets can be easily accomplished using this set. Set includes: chip carving knife, minichip knife and a skew knife.
Knife Set
Inc.vat 42.55
Ex.vat 35.46
Code 951172
The Flexcut SK chisels will fit into the Flexcut handle (810478) for carving by hand or, by using the 810480 adaptor, into the Bosch or Skil Power Carvers.
Inc.vat 47.40
Ex.vat 39.50
Code 952592
SK402 10mm(3/8) SK702 17mm(11/16) SK703 14mm(9/16) SK317 45 x 4mm(5/32) SK412 45 Vee x 6mm(1/4) SK401 14mm(9/16) SK701 20mm(13/16) SK408 6mm(1/4) SK706 90 Vee x 15mm(5/8) SK409 5mm(3/16) SK305 9.5mm(3/8) SK309 3mm(1/8) SK400 3 x 15mm(5/8) SK316 9.5mm(3/8) SK700 22mm(7/8)
Inc.vat 12.30 13.00 13.00 12.30 13.50 11.99 13.00 12.30 13.70 12.30 10.70 11.35 11.99 10.25 13.00
Ex.vat 10.25 10.83 10.83 10.25 11.25 9.99 10.83 10.25 11.42 10.25 8.92 9.46 9.99 8.54 10.83
Code 810492 810500 900000 810489 810497 810491 810499 810495 900003 810496 810485 810487 810490 810488 810498
These knives contain a rare blend of beauty, function and precision technology and they are designed for maximum performance from the highest quality steel. Each blade is precision machined, drop-forged and triple heat-treated to produce a hard cutting edge that stays sharp. Each knife is expertly hand sharpened and tested before leaving the factory. Each handle is made from exquisite South American Bocote wood with a natural leather inlay for more gripping power and extra comfort. With four knives to choose from, these truly are tools to treasure: Detail Knife, Roughing Knife, Upsweep Knife and Cutting Knife.
Inc.vat 29.30
Ex.vat 24.42
Code 475219
Detail Knife Roughing Knife Upsweep Knife Cutting Knife Forged Knives - Set of 4
Drawknife - 125mm
Inc.vat 30.25
Ex.vat 25.21
Code 600080
Knife Set
Inc.vat 61.96
Ex.vat 51.63
Code 211378
20
Inc.vat 57.50
Ex.vat 47.92
Code 952590
Whittlers Kit
Inc.vat 39.50
Ex.vat 32.92
Code 211379
600
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Detail Carving
Flexcut KN02 Knife Sheath with Belt Clip
This moulded leather sheath will fit any standard knife profile (does not fit mini-knives or scorps). A blade stop is fixed at the bottom of the sheath to keep the point from cutting through. The metal belt clip attaches easily to any belt style. Knife not included.
Knife Sheaf
Inc.vat 12.55
Ex.vat 10.46
Code 476620
KN150 R/H Scorp Set (4 Pce) KNL150 L/H Scorp Set (4 Pce) KN21 R/H Scorp - 3mm KNL21 L/H Scorp - 3mm KN22 R/H Scorp - 5mm KNL22 L/H Scorp - 5mm KN23 R/H Scorp - 8mm KNL23 L/H Scorp - 8mm KN24 R/H V Scorp - 6mm KNL24 L/H V Scorp - 6mm
Inc.vat 71.50 71.50 17.70 17.70 17.70 17.70 17.70 17.70 18.60 18.60
Ex.vat 59.58 59.58 14.75 14.75 14.75 14.75 14.75 14.75 15.50 15.50
Code 600079 486301 475770 475599 475771 475773 475772 475774 475643 475644
Flexcut Left & Right Handed Hook Knives Flexcut Hip Knife
The Flexcut Hip Knife is a versatile fine cutting tool that is capable of a wide range of woodcarving projects. Its high-carbon steel blade is precision machined and honed ready for use. The knife is supplied in a real leather sheath that easily attaches to your belt. The hook knife blade is curved, similar to a gouge for working in hollows with ease and fast stock removal. The handedness (right or left) is designated by pulling the tool toward you.
Carvers Knife
Inc.vat 27.70
Ex.vat 23.08
Code 475635
Hip Knife
Inc.vat 25.99
Ex.vat 21.66
Code 952593
Flexcut SlipStrop
Produced for honing and maintaining the edges on both the inside and outside of gouges and vee tools, the Flexcut SlipStrop consists of a complex moulding with two areas of leather and a bar of a specially developed honing compound. The compound is available separately for those wishing to use it on their existing strop. In use, the particular part of the moulding most suited to the chosen tool is rubbed crayon-like with compound and the tool stropped. A mirror finish is achieved quickly, and the resulting razor edge can be maintained by repeating the process many times before resharpening is required. Use for gouges and vee tools both inside and outside.
KN11 Skew Knife KN12 Cutting Knife KN13 Detail Knife KN14 Roughing Knife KN15 Chip Knife KN18 Pelican Knife
20
Inc.vat 67.50
Ex.vat 56.25
Code 600073
KN27 Detail knife KN19 Pelican Knife KN20 Chip Knife KN17 Draw Knife
601
Carvers Mallets
Veritas Journeymans Brass Mallet
Use this mallet with a normal grip or nestle it in the palm of your hand for exact control of the force. The brass head has a threaded connection to the handle for a secure fixing. The final turning of the handle is done after the handle is mounted, ensuring a perfectly smooth head on cherry wood handle. Overall length 150mm weight 570g.
Mallet - 570g
Inc.vat 28.66
Ex.vat 23.88
Code 202385
Carvers Screw
Inc.vat 16.80
Ex.vat 14.00
Code 476129
Mallet 510g(18oz)
Inc.vat 24.50
Ex.vat 20.42
Code 400402
Mallet - 540g
Inc.vat 20.45
Ex.vat 17.04
Code 386001
Bench Stud
Inc.vat 26.86
Dia. of plate 125mm
Ex.vat 22.38
Code 210535
Set of 6
Inc.vat 40.30
Ex.vat 33.58
Code 910186
Work Holding
Axminster Carvers Vice Veritas Carvers Vice Henry Taylor 5 Piece Starter Set
20
For anyone who would like to make a start in woodcarving, Henry Taylor, in conjunction with well known craftsman, teacher and author Jeremy Williams, has developed this special Starter Set Pack. The set contains five hand-forged tools (a range of four gouges plus a flat chisel), all sharpened and honed ready for use, and a 12 page leaflet written by Jeremy Williams, with complete instructions and a pattern to enable the beginner to produce an attractive relief carving. The hexagonal beech wood handles prevent the tools from rolling off the bench when not in use. This set contains: 1/4(6mm) flat chisel, 1/4(6mm) shallow gouge, 1/4(6mm) and 5/16(8mm) medium gouges and a 5/16(8mm) steep-cut gouge, blade lengths: 82mm - 90mm. Any good carvers vice should be adjustable in all three dimensions. The Veritas vice has full rotation in two and up to 75mm(3) of height adjustment in the third. An internal arrangement of a spring and an O ring ensures that repositioning the workpiece is a smooth, controlled operation, with no violent swings or movements, allowing precise placement for the next angle of attack. The layout of the base enables the vice to be mounted in a variety of ways, clamped in a vice, permanently fixed to a bench (side or top) or through a 19mm(3/4) dog hole with the optional dog mounting kit. The mounting plate provided with the vice is 90mm(3.1/2) diameter and there is an additional 50mm(2) diameter one also available. As with all Veritas products, form and function are combined to present a very superior tool. High quality materials and excellent workmanship mean this vice is going to serve the carvers needs for many, many years. This is a general purpose carving vice which offers a combination of ruggedness, versatility, ease of use and low cost. The body and base are made from cast iron and the mounting plate and other components are steel. Particular attention has been paid to the rigidity of the mounting plate and its stem which can be a source of flexing on less well made vices. The 125mm diameter mounting plate has 16 holes for the mounting screws, arranged in 3 concentric circles. The combination of heavy duty steel clamping handle, knurling on the shaft and serrations on the clamping faces ensures that nothing will move under onslaught from the mallet. The height excluding the mounting plate is 200mm. Also available as an accessory, is an arbor to accept the three most common thread sizes of woodturning chucks, faceplates etc. This enables woodturners to mount their work in the carvers vice without removing it from their chuck or faceplate.
Inc.vat 56.50
Ex.vat 47.08
Code 100538
Inc.vat Carvers Vice 101.50 Dog-Hole Mount Assembly 11.35 Mounting Plate with Rod 50mm(2) 13.00
Carvers Vice Spare Plate & Shaft Arbor T38 Arbor T04M Arbor T01 Carvers Vice C Spanner
602
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
The perfect way to mount the Axminster AMT, Dremel, Proxxon or any similar tool. The stand is made of three threaded aluminium sections standing some 960mm tall (2 sections can be used if required). The base has a table clamp (45mm capacity) but can also be attached using the screws supplied. Provision for 1/4 and 1/8 shank tool storage in the base.
Tool Stand
Inc.vat 22.90
Ex.vat 19.08
Code 110363
Large Round Rasp Large Square Rasp Small Round Rasp Small Square Rasp
This is a small selection of our Microplane range, please refer to the Hand Tool or the Abrasives sections for more products.
Flexible Drive
Small
Inc.vat 91.96
Standard
Ex.vat 76.63
Code 300228
Sanding Pen Kit 5 Blue 80 Grit Belts 5 Green 180 Grit Belts 5 Red 320 Grit Belts 5 Yellow 400 Grit Belts
Inc.vat 13.90
Ex.vat 11.58
Code 100055
20
Inc.vat 8.99
Ex.vat 7.49
Code 100147
Flexi Shaft
Inc.vat 34.60
Ex.vat 28.83
Code 300139
603
Power Carving
Reciprocating Carving Head with Chisels
An Optional Reciprocating Carving Head complete with Chisels for the Axminster Heavy Duty Flexible Drive Unit.
Carving Head
Inc.vat 36.60
Ex.vat 30.50
Code 910343
Carver Attachment
Inc.vat 40.25
Ex.vat 33.54
Code 300100
Inc.vat 156.95
Ex.vat 130.79
Code 718253
Inc.vat 17.86
Ex.vat 14.88
Code 810480
Inc.vat 121.50
Ex.vat 101.25
Code 486302
Starter Set
Inc.vat 52.50
Ex.vat 43.75
Code 474769
604
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Power Carving
This carving and shaping blade will give excellent results when used on a 115mm angle grinder (22mm bore). Being a little heavier than similar products and well balanced with five tungsten carbide cutting tips, the blade is very smooth in use with a controllable cutting action. The blade is 100mm diameter and the cutting tips are 6.8mm wide with a rounded profile. If you need to remove a lot of material quickly when carving or sculpting this blade will take some beating. N.B. It is important that protective equipment and adequate guarding should be used when using this type of blade.
Shaping Cutter
Inc.vat 39.95
Ex.vat 33.29
Code 951739
Power Chisel
Inc.vat 193.50
Ex.vat 161.25
Code 701802
Inc.vat 117.95
Ex.vat 98.29
Code 701801
115mm
Inc.vat 50.00
Ex.vat 41.67
Code 910135
Mini-Carver Mini Carver Blades (Pkt2) Sharpening File Replacement Drive Belt Mini Sanding Pads & Disc Industrial TCT Mini Cutter Adaptor for SLG900 Code 701800
Woodcarvers Pack
Inc.vat 52.96
Ex.vat 44.13
20
Woodcarving Set
Inc.vat 78.95
Ex.vat 65.79
Code 210575
Ex.vat 161.25
Code 474341
605