Вы находитесь на странице: 1из 5

Welding electrodes for high tensile steels, Welding electrodes E7016 E 7016, E7018 E 7018, We...

Page 1 of 5

> Welding electrodes > High tensile steel Homepage 3M Safety Abrasive products Arc welding products Ceramic backing material Cutting tools Electrode ovens Fein power tools Flux cored wire Gas cutting products Gloves Gouging electrodes Hoses MIG & TIG spare parts Plasma replacement parts Rectus couplings Rotatable earth clamps Safety products SAW Wire & Flux Smoke exhaust systems Solid MIG wire Solid TIG wire Speedglas TBi welding torches MIG TBi welding torches TIG Tungsten electrodes Vecom Weldas Welding blankets Welding clothing Welding electrodes Cast iron Hardfacing Heat resistant High tensile steel Low temperature Mild steel Stainless steel Weather proof steel Welding helmets Weldingspot seperations Contact *** DONATIONS *** Sitemap Mechanical properties: Yield strength Tensile strength Elongation Impact value 490 N/mm2 600 N/mm2 30% 80 J / -29C Classification: AWS EN

zaterdag, januari 29, 2011

WELDING ELECTRODES FOR HIGH TENSILE STEELS

S-7016.H
Description: S-7016.H can be used for welding of high tensile steel, such as bridges, buildings, shipbuilding, high pressure vessels and rolling stock. Soft stable arc.Good fluidity and removability of slag. Smooth appearance. Good mechanical properties. No undercut formation. Excellent crack resistance and X-ray performance.

A5.1/ASME SFA5.1 E7016 499 E 42 3 B 1 2

S-7016.H

S-7016.LF
Description: S-7016.LF is a low hydrogen type electrode of which fume generation is about 20~30%lower than conventional electrode. S-7016.LF is effective for the use in insufficientventilation.X-ray performance and mechanical properties of all-weld metal are good. Good crack resistance due to less hydrogen content. Classification: AWS EN Mechanical properties: Yield strength Tensile strength Elongation Impact value

A5.1/ASME SFA5.1 E7016 499 E 42 3 B 1 2

505 N/mm2 605 N/mm2 31% 75 J / -29C

S-7016.LF

http://www.lascentrum.com/en/welding+electrodes/high+tensile+steel/

29/01/2011

Welding electrodes for high tensile steels, Welding electrodes E7016 E 7016, E7018 E 7018, We... Page 2 of 5

S-7016.G
Description: S-7016.G can be used for welding of high tensile steel of ships, buildings, bridges andpressure vessels. It deposits weld metal of extremely good mechanical properties. Its usability is good in all position welding and weld metal of good appearance can beobtained assuredly. Classification: AWS EN Mechanical properties: Yield strength Tensile strength Elongation Impact value

A5.1/ASME SFA5.1 E7016 499 E 42 3 B 1 2

560 N/mm2 641 N/mm2 30% 68 J / -29C

S-7016.G

S-7018.G
Description: S-7018.G is an iron powder low hydrogen type electrode of high efficiency used for welding 490N/mm class high tensile steel. Classification: AWS EN Mechanical properties: Yield strength Tensile strength Elongation Impact value

A5.1/ASME SFA5.1 E7018 499 E 42 3 B 3 2

504 N/mm2 572 N/mm2 30% 111 J / -29C

S-7018.G

S-7028.F
Description: S-7028.F is a heavy iron powder type electrode. This electrode is intended for applications requiring the characteristics of the high deposition rate associated with iron-powder coating. Classification: AWS EN Mechanical properties: Yield strength Tensile strength Elongation Impact value

A5.1/ASME SFA5.1 E7028 499 E 42 2 B 7 4

478 N/mm2 546 N/mm2 32% 63 J / -20C

S-7028.F

S-7048.V
Description: S-7048.V is specifically designed for vertical downward welding. Slag is self peeling. Crack resistibility of weld metal is good. Classification: AWS EN

A5.1/ASME SFA5.1 E7048 499 E 42 3 B 3 5

http://www.lascentrum.com/en/welding+electrodes/high+tensile+steel/

29/01/2011

Welding electrodes for high tensile steels, Welding electrodes E7016 E 7016, E7018 E 7018, We... Page 3 of 5
Mechanical properties: Yield strength Tensile strength Elongation Impact value 473 N/mm2 564 N/mm2 31% 68 J / -29C

S-7048.V

S-8016.G
Description: S-8016.G can be used for welding of high tensile steel, such as buildings, bridges and shipbuilding. Extremely soft stable arc. Faster deposit rate hence, more economical. Smooth bead appearance. Good crack resistance of weld metal. No undercut formation. Good mechanical properties and X-ray performance. Classification: AWS EN Mechanical properties: Yield strength Tensile strength Elongation Impact value

A5.5/ASME SFA5.5 E8016-G 499 E 46 3 1Ni B 1 2

519 N/mm2 613 N/mm2 29% 141 J / -29C

S-8016.G

S-8018.G
Description: S-8018.G is an iron powder-low hydrogen type electrode for all position welding. As its deposition rate is extremely high, working hours can be shortened. The mechanical properties and crack resistibility of the allweld metal are also good. Classification: AWS EN Mechanical properties: Yield strength Tensile strength Elongation Impact value

A5.5/ASME SFA5.5 E8018-G 499 E 46 2 1Ni B 3 2

542 N/mm2 622 N/mm2 30% 103 J / -20C

S-8018.G

S-9016.G
Description: S-9016.G can be used for welding of high tensile steel such as pressure vessels,bridges, rolling stock, and machines using steel plates of high tensile steel. Good workability in all positions. Stable arc. Excellent mechanical properties and X-ray performance. Classification: AWS EN Mechanical properties: Yield strength Tensile strength Elongation Impact value

A5.5/ASME SFA5.5 E9016-G 499 E 50 2 B 1 2

570 N/mm2 655 N/mm2 27% 78 J / -20C

S-9016.G

http://www.lascentrum.com/en/welding+electrodes/high+tensile+steel/

29/01/2011

Welding electrodes for high tensile steels, Welding electrodes E7016 E 7016, E7018 E 7018, We... Page 4 of 5
S-10016.G
Description: S-10016.G can be used for welding of high tensile steel, such as pressure vessels, penstock and bridges. Its workability and X-ray properties are superb in all positions. Good toughness of all-weld metal. Extremely low hydrogen content and good crack resistibility. Classification: AWS EN Mechanical properties: Yield strength Tensile strength Elongation Impact value

A5.5/ASME SFA5.5 E10016-G 757 55 0 B 1 2

710 N/mm2 762 N/mm2 24% 110J / 0C

S-10016.G

S-11016.G
Description: S-11016.G can be used for welding of high tensile steel, such as pressure vessels,penstock and bridges. Good X-ray performance. High crack resistance and good mechanical properties. Extremely reliable for welding of 780N/mm class high tensile steel. Classification: AWS EN Mechanical properties: Yield strength Tensile strength Elongation Impact value

A5.5/ASME SFA5.5 E11016-G 757 E 62 2 Mn2NiMo B 1 2

760 N/mm2 790 N/mm2 24% 130 J / -20C

S-11016.G

S-9018.M
Description: S-9018.M can be used for welding of high tensile weather proof steel used in pressure vessels, bridges, rolling stocks, machines. S-9018.M is an iron powder low hydrogen type electrode which provides good workability in all positions. The weld metal has a good crack resistibility because of less hydrogen content. X-ray performance and usability are good. Classification: AWS EN Mechanical properties: Yield strength Tensile strength Elongation Impact value

A5.5/ASME SFA5.5 E9018-M 757 E 50 4 B 4 2

585 N/mm2 646 N/mm2 28% 89 J / -51C

S-9018.M

S-11018.M
Description: S-11018.M can be used for welding of low alloyed high strength steels such asHY-80, HY-90 and HY-100. S-11018.M is a low alloy, low hydrogen iron powder type electrode displaying fast, efficient metal transfer. The all-weld metal has a good X-ray performance and excellent tensile strength and impact properties. Deposition rates obtained are higher than E11016-G electrode types. Classification: AWS

A5.5/ASME SFA5.5 E11018-M

http://www.lascentrum.com/en/welding+electrodes/high+tensile+steel/

29/01/2011

Welding electrodes for high tensile steels, Welding electrodes E7016 E 7016, E7018 E 7018, We... Page 5 of 5
EN Mechanical properties: Yield strength Tensile strength Elongation Impact value 757 62 4 B 4 2

722 N/mm2 796 N/mm2 22% 50 J / -51C

S-11018.M

Copyright - Lascentrum

Ridderkerk - 2004
Hosted by Networking4all

http://www.lascentrum.com/en/welding+electrodes/high+tensile+steel/

29/01/2011

Вам также может понравиться