Академический Документы
Профессиональный Документы
Культура Документы
Total Questions:
215
For interactive and self-paced preparation of exam 000-104, try our practice exams. Practice exams also include self assessment and reporting features
Question: 1
An administrator wants to restore the /etc/resolv.conf file from a mksysb backup onto server1. After the mksysb is mounted in /mnt/backup/ from the local nim server, which command should be run to restore the file? A. tar -xvf /mnt/backup/server1.mksysb ./etc/resolv.conf B. restore -Tvf /mnt/backup/server1.mksysb ./etc/resolv.conf C. listvgbackup -f /mnt/backup/server1.mksysb -r ./etc/resolv.conf D. restorevgfiles -xrm /mnt/backup/server1.mksysb ./etc/resolv.conf
Answer: C Question: 2
Which action enables an administrator to make a VIO Server automatically activate when the physical machine is powered on? A. Ensure the /etc/auto_start file exists on the VIOS. B. Ensure the 'cfgdev -a boot=yes' command has been executed. C. Select the 'Automatically start when the managed system is powered on' option within the VIO Server LPAR profile. D. Add the VIO Server to the 'Automatically start when the managed system is powered on' field on the Managed System properties.
Answer: C Question: 3
Which files can be used together to allow remote command execution on a server? A. /etc/.rhosts and $HOME/hosts.equiv B. /etc/hosts.equiv and $HOME/.rhosts C. /etc/rhosts.equiv and $HOST/.rhosts D. /etc/hosts.equiv and $HOME/.hosts.equiv
Answer: B
For interactive and self-paced preparation of exam 000-104, try our practice exams.
Question: 4
Which command identifies broken or missing filesets? A. lppchk -v B. oslevel -chk C. bffstate -int D. geninstall -lsstate
Answer: A Question: 5
The server host1 has been set up as a backup system with the following /etc/exports: /backups -rw How can a second server regularly use this disk space? A. /usr/sbin/mkfs -s 8G -o nbpi=2048,frag=512 /dev/lv00 -b -l host1 B. /usr/sbin/crnfsmnt -d /backups -l /backups host1 -R -X -v -S -b bg C. /usr/sbin/mknfsmnt -f /backups -d /backups -h host1 -a -S -t rw -w bg -g D. /usr/sbin/crfs -v nfs -g vg1 -A yes -p rw -m /backups -a logname=/dev/lv00
Answer: C Question: 6
A client has a temporary deployment of a new static application that needs to run for a short period of time and is not going to change. How can this deployment be achieved with a minimum of effort and time? A. Run a system WPAR and deploy the application. B. Create a new LPAR and deploy the application. C. Create an application WPAR to deploy the application. D. Create an LPAR hosted by a VIO server and deploy the application.
Answer: C
For interactive and self-paced preparation of exam 000-104, try our practice exams.
Question: 7
An administrator has an existing HMC and POWER6 570 connected to a network switch. The administrator is planning to install two POWER6 570s with a dedicated HMC . Which infrastructure is required for the new HMC? A. An additional switch for the new HMC . B. Asynchronous adapters on the new HMC . C. The two 570 servers are directly connected to the new HMC . D. One 570 is directly connected to the new HMC and the other is directly connected to the existing HMC .
Answer: A Question: 8
What type of network connection is recommended for HMC and POWER6 Service Processor communication? A. Open B. Public C. Private D. Virtual
Answer: C Question: 9
An administrator has recently added a VLAN to the VIO server and wants to update the documentation. Which command displays the current VIO server VLAN configuration? A. lsmap -all B. lsmap -net C. lsmap -ent D. lsmap -vlan
Answer: B
For interactive and self-paced preparation of exam 000-104, try our practice exams.
Question: 10
A customer needs to create a number of LPARs on a new POWER6 server with some LPARs requiring a dedicated network and other LPARs utilizing Virtual Ethernet via a VIO server. Which limitation must be considered when planning the system configuration? A. A VIO server requires a dedicated LHEA port. B. There is a limit of 32 LPARs per virtual LAN. C. Two VIO servers will be required. A single VIO server can only provide virtual storage or virtual Ethernet. D. Two VIO servers will be required. One to provide virtual networking and another to provide dedicated networking.
Answer: A Question: 11
What is the minimum amount of memory required for a new LPAR to be built via NIM on AIX 6.1? A. 128M B. 256M C. 512M D. 1024M
Answer: B Question: 12
Which PowerVM feature will allow LPARs to be configured with different configurations of resources? A. Dynamic LPARs B. LPAR profiles C. Live Partition Configurability D. Multiple shared processor pools
Answer: B
For interactive and self-paced preparation of exam 000-104, try our practice exams.
Question: 13
Which of the following is the correct command to document a Power Systems server using sysplan? A. mksysp -m Server-9117-MMA-SN10FC123 > Server-9117-MMA-SN10FC123.sysplan B. mksysplan -f Server-9117-MMA-SN10FC123.sysplan -m Server-9117-MMA-SN10FC123 C. sysplan -new Server-9117-MMA-SN10FC123.sysplan -m Server-9117-MMA-SN10FC123 D. sysplancreate-mServer-9117-MMA-SN10FC123.sysplan-f Server-9117-MMA-SN10FC123
Answer: B Question: 14
Which website provides access to AIX Technology Level updates? A. AIX Tips B. Fix Central C. Critical Fixes D. pSeries and AIX Information Center
Answer: B Question: 15
What is the minimum number of CECs required to avoid single points of failure on a Power 570 server? A. 1 B. 2 C. 3 D. 4
Answer: B Question: 16
Which system provides redundant system clocks? A. Power 595
For interactive and self-paced preparation of exam 000-104, try our practice exams.
Answer: A Question: 17
What is the effect of using Capacity on Demand on LPARs configured on a managed system? A. It allows dynamic increase of CPU and memory allocation for all LPARs. B. It allows dynamic increase of CPU and memory allocation for LPARs when the 'Desired' and 'Maximum' partition profile values are equal. C. It allows dynamic increase of CPU and memory allocation for LPARs when the 'Desired' partition profile values are less than the 'Maximum' values. D. It allows dynamic increase of CPU and memory allocation for LPARs when the 'Desired' partition profile values are greater than the 'Maximum' values.
Answer: C Question: 18
A system is being booted into maintenance mode due to root password recovery. After accessing the root volume group and starting a shell without mounting the file systems, what is the next step? A. Delete root's password from the /etc/security/passwd file. B. Use the diag recovery tool option to reset root's password. C. Execute the 'passwd' command and assign a new passwd to root UID . D. Mount the / and /usr filesystems on alternative mount points to edit the password file.
Answer: D Question: 19
Which command(s) will result in the smallest sized backup of the text files contained in the /staticFS filesystem? A. tar -cvf file_system.tar /staticFS ; gzip file_system.tar B. tar -xvf /staticFS file_system.tar ; gzip file_system.tar C. tar -cvf /staticFS file_system.tar ; compress file_system.tar D. tar -xvf file_system.tar /staticFS ; compress file_system.tar
For interactive and self-paced preparation of exam 000-104, try our practice exams.
Answer: A
Question: 20
Which command should an administrator use to view files and volume group backup information from a mksysb called server1.mksysb that is found in /backups? A. lsmksysb -l /backups/server1.mksysb B. showmksysb -f /backups/server1.mksysb C. listvgbackup -f /backups/server1.mksysb D. showvgbackup -l /backups/server1.mksysb
Answer: C Question: 21
An administrator trying to restore a backup from tape encounters read errors. The administrator suspects that it could be an issue with the block device. What is the appropriate method to resolve this issue? A. Set the block size to 0. B. Read the tape using the tctl command. C. Use the 'cpio' command to override tape device settings. D. Run the 'dd' command to identify the block size from the tape.
Answer: A Question: 22
An administrator notices that some of their systems are reporting a number in the Deferred Level column on the HMC Updates panel. What is the meaning of the Deferred Level? A. The number denotes the firmware level which will be activated when AIX is next rebooted. B. The number denotes the firmware level which will be activated when all LPARs are next started. C. The number denotes the firmware level which will be activated when the managed system is next restarted. D. The number denotes how many days have elapsed since the firmware was installed without the LPARs being reactivated.
Answer: C
For interactive and self-paced preparation of exam 000-104, try our practice exams.
Question: 23
An administrator wants to have the flexibility to dynamically move a fibre channel PCI card between given LPARs. For each given LPAR how should they add the PCI card to the LPAR profile? A. Add the fibre channel card as Shared. B. Add the fibre channel card as Virtual. C. Add the fibre channel card as Desired. D. Add the fibre channel card as Required.
Answer: C Question: 24
A system administrator is creating four LPARs on a Power 550. The Power 550 has 64GB of memory installed and 32GB activated. The system administrator sets the minimum dedicated memory to 8GB in the profile for each LPAR. After activating three LPARs, he is not able to activate the fourth LPAR. What is the likely cause of the problem? A. The Power 550 is licensed for three LPARs only. B. There is not enough memory to meet the minimum dedicated memory requirement for the fourth LPAR. A faulty memory DIMM is detected in the POWER5 550. C. There is not enough memory to meet the minimum dedicated memory requirement for the fourth LPAR. The HMC reserves some memory to perform logical partition tasks. D. There is not enough memory to meet the minimum dedicated memory requirement for the fourth LPAR. The hypervisor reserves some memory to perform logical partition tasks.
Answer: D Question: 25
An administrator wants to do a backup of the HMC but sees that there are two options on the HMC menu: Backup Critical Console Data and Save Upgrade Data. Which of the following describes the differences between the two options? A. The Save Upgrade Data should be performed prior to updating HMC software. The Backup Critical Console Data should be performed whenever configuration changes are made to the HMC . B. The Save Upgrade Data should be performed prior to updating the Operating System on an LPAR. The Backup Critical Console Data should be performed prior to changing the network topology.
For interactive and self-paced preparation of exam 000-104, try our practice exams.
C. The Backup Critical Console Data should be performed prior to updating HMC software. The Save Upgrade Data should be performed whenever any managed hardware configuration is changed or upgraded. D. The Backup Critical Console Data should be performed prior to making changes to Service Agent or Service Focal Point. The Save Upgrade Data should be performed prior to changing the network topology.
Answer: A Question: 26
The IP address of POWER6 595 is showing up in the HMC instead of the server name. Next to the IP address is the status, which shows Failed Authentication. The system administrator needs to enter a password. Which password is needed to restore connection for the POWER6 595 to the HMC? A. The hscroot user password. B. The CE password. C. The HMC password. D. The ASM admin password.
Answer: C Question: 27
An administrator wants to host several LPARs on a JS23 Blade server. To achieve this what additional management software is required? A. HMC B. IVM C. VIOS D. IBM Director
Answer: C Question: 28
On which product media can the IVM install code be located? A. Base AIX Install media. B. Base VIOS Install media. C. AIX Expansion Pack media. D. VIOS Expansion Pack media.
For interactive and self-paced preparation of exam 000-104, try our practice exams.
10
Answer: B Question: 29
IBM remote support for hardware maintenance is required for several mission critical Power 595 servers. The data center is very security conscious and does not allow internet access. How should an administrator configure outbound connectivity of Electronic Service Agent? A. VPN B. Modem C. Private LAN D. Pass-through systems
Answer: B Question: 30
Which of the following commands should be used to delete an entry from the /etc/inittab? A. xitab B. rmitab C. chitab D. delitab
Answer: B Question: 31
Which command should an administrator use to put a system in maintenance mode without rebooting? A. init 0 B. telinit m C. shutdown -FM D. sh /etc/rc.maint
Answer: B
For interactive and self-paced preparation of exam 000-104, try our practice exams.
11
Question: 32
How can the administrator display the boot paths from which AIX can boot? A. bootinfo -r B. lspath -boot C. bosboot -ad hdisk0 D. bootlist -m normal -rv
Answer: D Question: 33
AIX shows the boot order in the following output: hdisk0 hdisk1 blv=hd5 cd0 What will happen when the system administrator reboots the server? A. The server will boot from cd0 B. The server will boot from hdisk0. C. The server will boot into SMS mode D. The server will boot from hdisk1.
Answer: D Question: 34
After mirroring rootvg, a system administrator wants to validate that the system will boot correctly. Which of the following tasks must be performed before changing the boot order? A. Run a bosboot -a command B. Mirror the hd5 on the two disks C. Set up another service mode bootlist D. Check the disks using a lsvg -p rootvg command
Answer: C
For interactive and self-paced preparation of exam 000-104, try our practice exams.
12
Question: 35
During which phase of the boot process is the rootvg volume group varied on and the root file system (hd4) checked? A. Boot phase 1 B. Boot phase 2 C. Boot phase 3 D. Boot phase 4
Answer: B Question: 36
Which reference code is displayed during the boot process that signals that an administrator may interrupt the boot process to enter the SMS Menu? A. 517 B. B0G1 C. E1F1 D. 00A8
Answer: C Question: 37
An administrator is configuring an LPAR for a NIM installation and is unsure if the 'Ping Test' option within SMS is a required configuration step. Which statement best describes the 'Ping Test' option? A. The 'Ping Test' is a recommended step to verify the IP information entered into the RIPL SMS panel. B. The 'Ping Test' is a mandatory step required to commit the IP information entered into the RIPL SMS panel. C. The 'Ping Test' is an optional step to verify network configuration entered into the RIPL SMS panel on older copper-based networks. D. The 'Ping Test' is an optional step to verify network connectivity between client and server, where ICMP traffic is allowed on the connecting network.
Answer: D
For interactive and self-paced preparation of exam 000-104, try our practice exams.
13
Question: 38
While configuring a new adapter using cfgmgr, an administrator receives a warning message indicating that some device packages are not installed. Additionally, the adapter displays in the Defined state. Which command will resolve the issue and make the adapter available? A. shutdown -Fr B. cfgmgr -i C. mkdev -l D. mknode /dev/
Answer: B Question: 39
Which cfgmgr flag will display additional information during device configuration? A. cfgmgr -a B. cfgmgr -v C. cfgmgr -x D. cfgmgr -o
Answer: B Question: 40
A server is experiencing performance issues and the SAN could be a potential bottleneck. Which command will show the queue depth of hdisk1? A. lspv hdisk1 B. lscfg v hdisk1 C. lsdev Cc hdisk1 D. lsattr El hdisk1
Answer: D
For interactive and self-paced preparation of exam 000-104, try our practice exams.
14
Question: 41
An administrator tries to change the checksum_offload setting on ent0, but the chdev command responds that the adapter is busy. What can be done to resolve this? A. Use chdev with -P flag and run cfgmgr. B. Use chdev with -R flag and run cfgmgr. C. Use chdev with -P flag and reboot the system. D. Use chdev with -R flag and reboot the system.
Answer: C Question: 42
How can the administrator use file 'a' containing '-El sys0' to view the attributes of a device? A. lsdev -fv a B. lsattr -f a C. lsattr | `cat a` D. lsdev -Cc | cat a
Answer: B Question: 43
Which command shows all the paging spaces available on a system? A. lsps -a B. showps -a C. psdisplay -l D. swaplist -ALL
Answer: A Question: 44
Which command will activate a defined paging space? A. swapon paging01
For interactive and self-paced preparation of exam 000-104, try our practice exams.
15
Question: 45
Which file should be edited to manually add a printer? A. /etc/prtconf B. /etc/qconfig C. /etc/lpconfig D. /etc/prtconfig
Answer: B Question: 46
The system administrator is making system wide changes to a server, which will add to the PATH variable for the server environment. Where is the PATH variable found for the system? A. /profile B. /etc/envpath C. /etc/profile D. /etc/environment
Answer: D Question: 47
An administrator is moving a volume group from one server to another. The disks will be physically moved between the two systems. Which two operations are required on the volume group prior to the physical disk switch? A. 'varyoffvg' and 'exportvg' B. 'varyofflv' and 'importvg' C. 'varyofflv' and 'migratepv' D. 'varyoffvg' and 'migratevg'
Answer: A
For interactive and self-paced preparation of exam 000-104, try our practice exams.
16
Question: 48
An administrator has mirrored the root volume group to a second disk, but 'bootlist' is failing to correctly add the second disk. What is the likely cause of the problem? A. The administrator has failed to run 'bosboot -ad <2nd disk>' prior to the bootlist command. B. The administrator has failed to run 'bootinfo -B <2nd disk>' prior to the bootlist command. C. The administrator has failed to run 'mirrorvg -m rootvg <2nd disk>' prior to the bootlist command. D. The administrator has failed to run 'bosboot -ad /dev/ipldevice <2nd disk>' prior to the bootlist command.
Answer: A Question: 49
How should an administrator change the order in which host name lookup is performed so that it reads the host file before using DNS? A. Edit the /etc/inetd.conf file so that it reads 'local, bind'. B. Edit the /etc/resolv.conf file so that it reads 'local, bind'. C. Edit the /etc/netsvc.conf file so that it reads 'local, bind'. D. Edit the /etc/nslookup.conf file so that it reads 'local, bind'.
Answer: C Question: 50
An administrator needs to configure a server (192.168.22.22) as a temporary solution for an NTP master that has stopped working. What is the process for configuring the NTP master? A. Edit the /etc/ntp.conf file changing the server line to 'server 127.127.1.0' and add the line 'fudge 127.127.1.0 stratum 0', and then refresh the daemon. B. Edit the /etc/ntp.conf file changing the server line to 'server 127.127.1.0' and add the line 'master 127.127.1.0 stratum 0', and then refresh the daemon. C. Edit the /etc/ntp.conf file changing the server line to 'server 192.168.22.22' and add the line 'fudge 192.168.22.22 stratum 0', and then refresh the daemon. D. Edit the /etc/ntp.conf file changing the server line to 'server 192.168.22.22' and add the line 'master 192.168.22.22 stratum 0', and then refresh the daemon.
Answer: C
For interactive and self-paced preparation of exam 000-104, try our practice exams.
17
Question: 51
What must an administrator do to prevent new telnet users from connecting to the system? A. rmdev -l /dev/pts B. touch /etc/nologin C. chdev -l sys0 -a nologin D. chuser -a login=false ALL
Answer: B Question: 52
How should TCP/IP be configured on the ent0 network adapter? A. ifconfig en0 192.168.10.1 netmask 255.255.255.0 gateway 192.168.10.254 B. ifconfig ent0 192.168.10.1 netmask 255.255.255.0 gateway 192.168.10.254 C. mktcpip h test61 -a 192.168.10.1 -i en0 m 255.255.255.0 g 192.168.10.254 -s D. mktcpip h test61 -a 192.168.10.1 -i ent0 m 255.255.255.0 g 192.168.10.254 s
Answer: C Question: 53
What should an administrator do to allow the logon of a user to a local system without limitations from the host 'webserver'? A. configure the /etc/.rhosts with: webserver B. configure the root'$HOME/.rhost file with: +webserver C. configure each user's $HOME/.rhosts file with: webserver D. configure the root'$HOME/.rhost file with:
Answer: C
For interactive and self-paced preparation of exam 000-104, try our practice exams.
18
Question: 54
Which command should be used to capture network traffic between the localhost and a host named 'webserver'? A. tcpdump webserver B. tcpdump host webserver C. tcpdump -hostname webserver D. tcpdump -print -h webserver
Answer: B Question: 55
Which command displays the number of packets transmitted for each NIC available on the system? A. entstat -v B. netstat -i C. entstat -aon D. netstat -na
Answer: B Question: 56
Which smit fastpath should be used to configure Link Aggregation on a server? A. tcpip B. linkAgg C. failover D. etherchannel
Answer: D Question: 57
What is the process for creating an NFS mount between two servers in the same network zone? A. Export the desired filesystem in the /etc/nfs file, run 'exportfs -a', create a mount directory on
For interactive and self-paced preparation of exam 000-104, try our practice exams.
19
the desired server, and mount the NFS filesystem. B. Run 'exportfs -a', export the desired filesystem in the /etc/nfs file, create a mount directory on the desired server, and mount the NFS filesystem. C. Export the desired filesystem in the /etc/exports file, run 'exportfs -a', create a mount directory on the desired server, and mount the NFS filesystem. D. Run 'exportfs -u', export the desired filesystem in the /etc/exports file, create a mount directory on the desired server, and mount the NFS filesystem.
Answer: C Question: 58
What is the correct command for creating a new user ID authenticated with LDAP? A. mkuser -R LDAP B. mkuser -L LDAP C. mkuser -auth LDAP D. mkuser -a auth1=LDAP
Answer: A Question: 59
Which command will create a group called 'delivery' and set the administrators to 'john' and 'mary'? A. mkgroup -A=john,mary delivery B. groupadd -A=john,mary delivery C. mkgroup adms=john,mary delivery D. groupadd adms=john,mary delivery
Answer: C Question: 60
Which command will configure a directory /commonfiles so that a user cannot delete files owned by other users in the same group? A. chmod +S /commonfiles B. chmod 4775 /commonfiles C. chmod 1777 /commonfiles D. chmod -orgx /commonfiles
For interactive and self-paced preparation of exam 000-104, try our practice exams.
20
Answer: C Question: 61
Which command displays the contents of the /var/adm/wtmp file? A. view B. strings C. /usr/sbin/viwtmp D. /usr/sbin/acct/fwtmp
Answer: D Question: 62
During an attempt to 'scp' between two hosts, an error indicating PRNG is not seeded is displayed. What is the likely cause of the error? A. The sshd user id is locked. B. The /var/empty directory needs to be created. C. PRNG is set to 'no' in the /etc/ssh/sshd_config file. D. The permissions on /dev/random and /dev/urandom are incorrect.
Answer: D Question: 63
An administrator created a .env file in a user's home directory to configure a number of custom environment variables for a local application. However, after the user logs out and then logs back into the system, the custom variables are not being set. What is the most likely reason that the custom .env file is being ignored? A. A shell other than ksh is being used by the user. B. The line 'export ENV=$HOME/.env' is missing from /etc/profile. C. The line 'export ENV=$HOME/.env' is missing from the user's .profile. D. The env_profile attribute is not defined for the user within /etc/security/user.
Answer: C
For interactive and self-paced preparation of exam 000-104, try our practice exams.
21
Question: 64
Which single compound 'chmod' command would achieve the same result as these four commands? chmod g-w mydir chmod o-w mydir chmod g+x mydir chmod o+x mydir A. chmod go+w mydir B. chmod go-w mydir C. chmod go-w-x mydir D. chmod go-w+x mydir
Answer: D Question: 65
Which command will enable RBAC on a server? A. setkst -t enable ; reboot B. chrbac -a enable ; reboot C. enable enhanced_RBAC ; reboot D. chdev -l sys0 -a enhanced_RBAC='true' ; reboot
Answer: D Question: 66
What are the minimal resources to perform a NIM BOS install? A. spot, lpp_source B. mksysb, lpp_source C. boot, bundle, nim_script D. aix disks, spot, lpp_source
Answer: A
For interactive and self-paced preparation of exam 000-104, try our practice exams.
22
Question: 67
An administrator is testing the alt_disk_copy command and has cloned the active rootvg volume group. The copied volume group is spread across 2 disks. # lspv hdisk0 00006091aef8b687 old_rootvg hdisk1 00076443210a72ea rootvg hdisk2 0000875f48998649 old_rootvg Which command will identify the boot disk for the cloned volume group? A. bootlist -m normal -o B. bootlist -m alternate -o C. alt_rootvg_op -q -d hdisk0 D. alt_rootvg_op -b -v old_rootvg
Answer: C Question: 68
What are the steps required to perform a Preservation install on a server? A. Shutdown the server and boot it into SMS. Select SMS menu option OS Upgrade, Preservation install for the install type, and allow upgrade to run. B. Shut down the server and perform a network boot from a local NIM server. Select Preservation install for the install type, and allow upgrade to run. C. Shutdown the server and boot it into SMS. Select SMS menu option OS Upgrade, Preservation install for the install type, and allow for upgrade to run. D. Re-boot the server and NFS mount the bos images from a local NIM server. Run smit install. Select Preservation install for the install type, and allow upgrade to run.
Answer: A Question: 69
Which install method should be used to recycle an LPAR without retaining any information from its original configuration? A. Migration B. Preservation C. New and Complete Overwrite D. Alternate disk installation
For interactive and self-paced preparation of exam 000-104, try our practice exams.
23
Answer: C
Question: 70
An application fails to start after a Technology Level upgrade. The application vendor recommends that two filesets upgraded as part of the new Technology Level be rejected. What is the recommended method for performing this task? A. Run instfix -u to reject the filesets. B. Run installp -r to reject the filesets. C. Run installp -u to uninstall the filesets. D. Restore the system to previous state from the system backup.
Answer: D Question: 71
Which command manages interim fixes applied as concurrent updates? A. emgr B. instfix C. installp D. smit concurrent_update
Answer: A Question: 72
Which best describes the main purpose of Service Update Management Assistant (SUMA)? A. Schedules the install AIX APARs and updates B. Automatically installs AIX APARs and updates via the HMC C. Schedules and automates the download of AIX APARS and updates D. Automatically queries existing machines and alerts when APARS and updates are available
Answer: C
For interactive and self-paced preparation of exam 000-104, try our practice exams.
24
Question: 73
What facilitates the installation of the base fileset for the Data Encryption Standard (DES) Library Routines? A. Fix Central B. AIX 6.1 disc C. IBM AIX Toolbox D. AIX Expansion Pack
Answer: D Question: 74
Which communication protocols are valid between the NIM master and standalone clients? A. shell and ldap B. shell and nimsh C. shell and kerberos D. shell, nimsh and ldap
Answer: B Question: 75
For NIM to install client machines located in a non-adjacent network, which routing must be defined? A. Boot/install servers will be required on each intermediate network. B. When an install is initiated by the client, routing is only required from the LPAR back to the NIM master. C. When an install is initiated by the NIM master, routing is only required from the NIM master to the client. D. Appropriate network NIM resources need to be defined to the NIM master to allow routing in both directions.
Answer: D
For interactive and self-paced preparation of exam 000-104, try our practice exams.
25
Question: 76
Which is a supported method to upgrade firmware on an IBM Power Systems 570? A. Use the /usr/sbin/invscout AIX command. B. Use the 'Updates' panel on the managing HMC . C. Boot the 570 using an IBM-provided microcode CD . D. Use the /usr/lpp/diagnostics/bin/update_flash AIX command.
Answer: B Question: 77
What is the implication of using Deferred versus Concurrent firmware updates? A. Deferred firmware updates require a reboot to be applied, while concurrent updates do not. B. Deferred firmware updates require a full power IPL to be applied while concurrent updates do not. C. Concurrent firmware updates require all LPARs to be quiesced and shutdown prior to initiating the update, while deferred updates do not. D. Concurrent firmware updates can be applied to multiple managed systems in parallel, while deferred updates must be applied sequentially.
Answer: B Question: 78
While reducing a file system, an administrator receives the following error message: root@aixserver:/home/root# df -k /var Filesystem 1024-blocks Free %Used Iused %Iused Mounted on /dev/hd9var 3538944 2686256 25% 14370 3% /var root@aixserver:/home/root# chfs -a size=-512M /var chfs: There is not enough free space to shrink the file system. What is the most likely cause of the problem? A. The jfs2log is corrupt. B. The bos.rte.filesystem fileset is broken. C. The file system cannot be reduced by a multiple of 512 megabytes. D. The df command does not reflect fragmentation or the size of the metadata.
Answer: D
For interactive and self-paced preparation of exam 000-104, try our practice exams.
26
Question: 79
Which presents the heirarchical relationship between LVM entities? A. Volume Group > Physical Volume > Logical Volume > Filesystem B. Physical Volume > Volume Group > Logical Volume > Filesystem C. Volume Group > Physical Volume > Filesystem > Logical Volume D. Physical Volume > Volume Group > Filesystem > Logical Volume
Answer: A Question: 80
While running 'lsvg -l rootvg', an administrator notices that the quantity of LPs and PPs are different. What is the likely cause? A. The LPs represent a section of logical storage that can be mapped to multiple PPs. B. The PPs represent the mapping to the physical disk. There will always be either equal or fewer PPs than LPs. C. The LPs represent a section of logical storage that is mapped to a PP that spans over multiple physical disks. D. The LP represents a section of logical storage. This is mirrored on the filesystem level which creates a greater number of PPs.
Answer: A Question: 81
A system has a mirrored data volume group that has a filesystem /data of 10 logical partitions. How many physical partitions will the filesystem have? A. 1 B. 2 C. 10 D. 20
Answer: D
For interactive and self-paced preparation of exam 000-104, try our practice exams.
27
Question: 82
An administrator is trying to extend an existing volume group with a new hard disk, but the extendvg command returns the following error: The chvg -t may or may not allow the extendvg command to succeed. What is the implication of using this option? A. It reduces the maximum file size allowed within the given volume group. B. It reduces the maximum number of files allowed within the given volume group. C. It reduces the maximum number of logical volumes allowed within the given volume group. D. It reduces the maximum number of physical volumes allowed within the given volume group.
Answer: D
Question: 83
A SAN needs to undergo disruptive maintenance, which will effect a hosted production system with multiple applications and related volume groups, one of which, datavg, resides on the SAN. There is one spare disk in the system but it is smaller than datavg. How can application outages and risk of corruption be minimized? A. Stop the applications in all data volume groups and shut the system down during the outage period. B. Stop the applications in datavg, unmount all datavg filesystems, varyoff datavg, and export datavg. C. Stop the applications in datavg, unmount all datavg filesystems, and reduce datavg by the SAN disks. D. Use the 'cpvg' command with the -z option to copy and compress datavg to different physical volumes.
Answer: B Question: 84
What is the objective of the superstrict option that can be used when creating mirrors? A. Allows the mirror partitions to spread across a maximum number of disks. B. Allows the copy of a partition to be on the same physical volume as the mirrored partition. C. Prevents partitions allocated to one logical volume mirror from sharing a physical volume with partitions from another logical volume mirror. D. Forces copies of logical partitions to be housed on different physical volumes, while allowing
For interactive and self-paced preparation of exam 000-104, try our practice exams.
28
Answer: C Question: 85
A previously functional, scheduled snapshot operation against a JFS2 filesystem has failed. The JFS2 filesystem is mounted and appears intact. What is the most likely cause of the failure and how should it be resolved? A. The associated JFS2 log device has failed. Check the log device and varyon the device. B. The logical volume that hosts the snapshots is full. Increase the size of the logical volume. C. Fifteen snapshots already exist for the given JFS2 filesystem. Delete at least one existing snapshot. D. The volume group that hosts both the snapshots and JFS2 filesystem has lost quorum. Check and correct the integrity of the volume group.
Answer: C Question: 86
A log logical volume is created as indicated below: A A new filesystem is then created using the new log logical volume. When the administrator attempts to mount the filesystem, the following error occurs: Which of the following actions will resolve this error? A. Recreate the file system with -p rw flags and re-mount. B. Run 'logform /dev/loglv00' and hit 'y' to destroy all data. C. Run 'clrginfo -p' to clear the invalid filesystem parameter. D. Change 'account = true' value in /etc/filesystem to 'account = false'.
Answer: B Question: 87
An administrator attempts to create a link of /etc/db_conf to the target directory /db/v9.7/install/config. The following ln command failed to create the link: ln /db/v9.7/install/config /etc/db_conf Which option should be used when re-running the command to resolve the problem? A. -s flag to create a soft link B. -n flag to force create a hard link C. -N flag to force create a hard link
For interactive and self-paced preparation of exam 000-104, try our practice exams.
29
Answer: A Question: 88
The virtual disk hdisk12 has multiple paths. The disk belongs to volume group vg01. The volume group is currently in use. Which command will remove the path connected to vscsi0? A. rmdev l hdsik12 p vscsi0 B. rmpath l hdisk12 p vscsi0 C. chpath l hdisk12 p vscsi0 -d D. varyoffvg vg01; rmdev l hdisk12 a vscsi0
Answer: B Question: 89
Which method will configure an e-mail notification when permanent hardware errors are logged in the errorlog? A. Create or update the errnotify stanza in the ODM. B. Update errpt daemon configuration file /etc/errpt.conf. C. Update errpt daemon configuration file /var/adm/errpt.conf. D. Define a notification alias in the /etc/syslog.conf file with the *.error stanza
Answer: A Question: 90
Which command will purge the errorlog of all recorded occurrences of a given SRN? A. errclear 0 B. errpt -r -j C. errclear -j D. errclear -k
Answer: C
For interactive and self-paced preparation of exam 000-104, try our practice exams.
30
Question: 91
Prior to installing a new system, an administrator needs to provide the SAN administrators with the WWN of the fibre channel cards to allow them to allocate and zone bootable storage. Due to the lack of installed operating system, the administrator will use a bootable diagnostic CD . Which option within the diag utility will display the required information? A. Task Selection > Display Hardware Vital Product Data B. Advanced Diagnostic Routines > Display Resource Attributes C. Diagnostic Routines > Display Configuration and Resource List D. Task Selection > Display Multipath I/O (MPIO) Device Configuration
Answer: A Question: 92
An administrator is supporting an AIX 6.1 LPAR remotely and needs a tape operator to plug a cable into an Ethernet adapter. The tape operator does not have POWER6 595 knowledge. What can the administrator do to assist the tape operator to locate the correct adapter? A. Advise the tape operator to review the hardware service guide. B. Use the diag command to set the Ethernet adapter slot LED to flash. C. Advise the tape operator to check the WWN stickers of all Ethernet adapter in the I/O drawers. D. Create a login account for tape operator on the HMC and advise the tape operator to locate the adapter using the GUI step by step.
Answer: B Question: 93
A system is experiencing name resolution issues. The administrator has verified that /etc/resolv.conf is suitably configured using correct syntax. However, processes run by non company 000104 root users are failing to resolve any hostnames to IP addresses with the error 'No response from server'. Which tool will help trace the nslookup command in an attempt to investigate the problem? A. kdb B. dbx C. trace D. truss
Answer: D
For interactive and self-paced preparation of exam 000-104, try our practice exams.
31
Question: 94
Which command will determine if the Trusted Computer Base is enabled on a system? A. getrunmode B. getsecconf C. tcbck -display D. odmget -q attribute=TCB_STATE PdAt Answer: D
Question: 95
Which command will list ODM class descriptions to provide the format needed to create a new class? A. odmadd B. odmget C. odmshow D. odmcreate
Answer: C Question: 96
Which command will allow an administrator to view the primary and secondary dump devices? A. sysdumpdev -l B. dumpmgr -ALL C. lsdev -Cc dump D. diag -dump=show
Answer: A Question: 97
Which command shows dump components and controls live dump attributes? A. dumpctrl B. sysdumpdev C. livedumpdev
For interactive and self-paced preparation of exam 000-104, try our practice exams.
32
D. livedumpctrl
Answer: B Question: 98
Which of the following will identify the largest file in a given filesystem? A. df -r / | sort -rn +4 B. ls -lR / | sort -rn +1 C. fuser -f / | sort -rn +6 D. find / -type f -xdev -ls | sort -rn +6
Answer: D Question: 99
During system boot, rootvg fails to vary on, causing an LED code of 0552. What is the most likely cause for rootvg not varying on? A. Missing blv B. Network problem C. Wrong boot table D. Corrupted file system
Answer: C
For interactive and self-paced preparation of exam 000-104, try our practice exams.
33
Question: 101
During a NIM install, the system stops with the LED code 611. What is the cause of the issue? A. A failure to NFS mount filesystems from the NIM client B. A failure to NFS mount filesystems from the NIM master
C. A failure to retrieve the tftp client info from the NIM master D. A failure to retrieve the tftp server info from the NIM master
Answer: A
For interactive and self-paced preparation of exam 000-104, try our practice exams.
34
Question: 104
Which action changes the default editor for ALL users on the system from vi to edit? A. Issue the command: export EDITOR=/usr/bin/edit edit each users .profile to change the EDITOR value to /usr/bin/edit B. Modify /.profile and change the EDITOR variable to /usr/bin/edit C. Modify /etc/environment and add EDITOR=/usr/bin/edit export EDITOR D. Modify /etc/security/defaults and change the EDITOR value to /usr/bin/edit
35
hd1 jfs 1 2 2 open/syncd /home hd10opt jfs 2 4 2 open/syncd /opt loglv00 jfs2log 1 1 1 open/syncd N/A fslv00 jfs2 2 4 2 open/syncd /datafs A. add a copy of the log for /datafs B. open hd5 C. mirrorvg rootvg D. split /usr as it is too big
36
B. Dual disk drive enclosures, dual disk drives, extra media bay C. Dual disk drive enclosures, dual disk drives and dual SCSI adapters D. Dual I/O planar, extra media bay, dual disk drives
For interactive and self-paced preparation of exam 000-104, try our practice exams.
37
Answer: D
For interactive and self-paced preparation of exam 000-104, try our practice exams.
38
Question: 116
Which command restores files from a volume group backup on a specified media? A. mksysb -r B. savevg -r C. restorevg -r D. restorevgfiles
For interactive and self-paced preparation of exam 000-104, try our practice exams.
39
Question: 120
How can a JFS2 filesystem be added to a volume group that has insufficient space to host a log LV? A. Create the filesystem with an inline log. B. Create the filesystem referring to the jfs2log in rootvg. C. Create the filesystem and format the logical volume with 'logform'. D. Create the filesystem's underlying logical volume with an inline log.
For interactive and self-paced preparation of exam 000-104, try our practice exams.
40
Answer: B
For interactive and self-paced preparation of exam 000-104, try our practice exams.
41
Question: 126
What is the theoretical maximum number of logical ports that a one port of a 2-port 10Gb IVE can provide if no VIO Server is connected to the IVE? A. 2 B. 4 C. 8 D. 16
Answer: D
For interactive and self-paced preparation of exam 000-104, try our practice exams.
42
Question: 129
Which of the following is a situation where dual (redundant) HMCs are recommended? A. When managing more than four VIO servers. B. When installed with Power 570 and larger hardware. C. When hosting both Linux and AIX on the same physical hardware. D. When unexpected outage on a single HMC would prove an untenable risk for the hosted LPARs.
Answer: C
For interactive and self-paced preparation of exam 000-104, try our practice exams.
43
Question: 132
An administrator plans to use bootable AIX media to boot a system into maintenance mode. The system is running AIX 5.3 TL09 with a 64-bit kernel. The administrator has a selection of media available. Which media should the administrator use? A. Any AIX bootable media, providing it is a 64-bit variant B. Any AIX bootable media, providing it is AIX 5.1 or later C. Any AIX 5.3 bootable media, providing it is TL09 or later D. Any AIX 6.1 bootable media, providing it is TL02 or later
Answer: A
For interactive and self-paced preparation of exam 000-104, try our practice exams.
44
Question: 135
A backup is taken using the following command: tar -cvf abcdef.tar /usr/local/include/tcpd.h The operator is in the directory /usr/local/restores and runs the following command: tar -xvf abcdef.tar Where will the file be restored? A. /usr/local/include/tcpd.h B. /usr/local/restores/tcpd.h C. /usr/local/restores/include/tcpd.h D. /usr/local/restores/usr/local/include/tcpd.h
Answer: C
For interactive and self-paced preparation of exam 000-104, try our practice exams.
45
Question: 138
The administrator changed the number of virtual processors from 1 to 2 in the default_profile of an LPAR. The operator ran the cfgmgr command expecting to see 2 processors after that, but did not see them. What action must be done to apply the changes? A. Reboot AIX within the LPAR. B. Run cfgmgr against the device sys0. C. Shutdown and then activate the default_profile. D. Ensure the RSCT daemon is operative and run cfgmgr again.
46
Answer: B
For interactive and self-paced preparation of exam 000-104, try our practice exams.
47
Question: 144
The administrator created an entry in the inittab for run level 2. The system was already booted in normal mode. Which will start the newly created entry? A. init 1 B. /etc/rc C. telinit q D. /etc/rc.d/rc2.d Answer: C
Question: 145
How can an administrator view the service bootlist? A. service -l bootlist B. bosboot -ad service C. listboot -l service D. bootlist -om service
Answer: D
For interactive and self-paced preparation of exam 000-104, try our practice exams.
48
Question: 147
After mirroring rootvg, a system administrator wants to validate that the system will boot correctly. Which of the following tasks must be performed before changing the boot order? A. Run a bosboot -a command B. Mirror the hd5 on the two disks C. Set up another service mode bootlist D. Check the disks using a lsvg -p rootvg command
Answer: C
For interactive and self-paced preparation of exam 000-104, try our practice exams.
49
Question: 150
An administrator has added hdisk2 to rootvg and would like to create a boot logical volume on the disk so it can be used as the primary boot partition on the next reboot. Which command should the administrator use? A. bosboot -ad hdisk2 B. mkblv -y bootlv hdisk2 C. crlv -t bootlv -d hdisk2 D. bootlist -om normal hdisk2
Answer: D
For interactive and self-paced preparation of exam 000-104, try our practice exams.
50
Question: 153
Which command will enable the administrator to query the current network adapter configuration? A. netstat -v B. entstat -d C. lsattr -El D. lsdev -C -attr
For interactive and self-paced preparation of exam 000-104, try our practice exams.
51
Answer: B
For interactive and self-paced preparation of exam 000-104, try our practice exams.
52
Question: 160
A new LPAR has been created that needs SAN attached disk for a database. After AIX has been installed, the fibre cables are attached to the adapters. How should the administrator configure the disks? A. Run 'mkdev' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks. B. Run 'mkpath' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks. C. Run 'chpath' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks. D. Run 'cfgmgr' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks.
Answer: A
For interactive and self-paced preparation of exam 000-104, try our practice exams.
53
Question: 163
A system is experiencing packet routing problems, when the administrator runs 'netstat -nr' the following default routes are displayed: default165.253.251.1UG51601304 en8-default192.168.50.1UGH01590450 en4-Assuming the first route is correct, how can the administrator remove the incorrect default route? A. route delete default 192.168.50.1 B. access smit with the route_remove shortcut C. chdev -l inet0 -a delroute=net,-hopcount,0,,192.168.50.1 D. flush the routing table from the console and configuring the 165.253.251.1 route
Answer: D
For interactive and self-paced preparation of exam 000-104, try our practice exams.
54
Question: 166
After updating serverB's network configurations, an administrator notices that serverA, which resides in a different subnet, is unable to communicate with serverB via ssh or telnet. As ping's to the server fail, the administrator logs onto serverB via a console and finds an available interface en0 in the 'up' state. From the console connection, en0 can communicate with other servers in the same subnet. What is the most likely cause of the problem? A. en0 has no associated ip address. B. serverB is missing its default route. C. serverB and serverA cannot connect due to a firewall. D. en0 has been set up to block traffic from servers that are in different subnets.
Answer: B
For interactive and self-paced preparation of exam 000-104, try our practice exams.
55
Question: 168
Which daemon identifies available filesystems through the /etc/xtab file? A. nfsd B. biod C. rpc.lockd D. rpc.mountd
Question: 170
Which command should be used to reset a failed login count? A. chsec B. chusr C. passwd D. chgusrprf
56
Answer: B
For interactive and self-paced preparation of exam 000-104, try our practice exams.
57
Question: 175
How should read, write and execute permissions for 'group' and 'other' be granted to all files and directories within the /app filesystem? A. chmod -R 677 /app B. chmod -R 664 /app C. chmod -r 677 /app D. chmod -r 664 /app
58
For interactive and self-paced preparation of exam 000-104, try our practice exams.
59
Answer: B
For interactive and self-paced preparation of exam 000-104, try our practice exams.
60
Question: 184
Which command is used to initialize and configure a NIM master? A. /usr/sbin/nim_init B. /usr/bin/installnim C. /usr/sbin/nimconfig D. /usr/sbin/setup_server
61
Which command will display similar information? A. lsmcode B. diag -S 1 C. prtconf | grep firmware image D. invscout -vf [Server system name]
62
63
B. 'lsvg -o' only displays the root volume group. C. 'lsvg -o' only displays the fist volume group. D. datavg has no filesystems and therefore, is inactive.
For interactive and self-paced preparation of exam 000-104, try our practice exams.
64
Question: 195
Files /tmp/file2 and /tmp/file3 are hard linked to /tmp/file1. What will the result be if a user makes changes to /tmp/file2 at the same time another user tries to delete /tmp/file1? A. All three files will contain the updates and will remain available. B. All three files will be deleted and no changes will be made to /tmp/file2. C. Only /tmp/file2 will contain the updates, but /tmp/file3 will remain available. D. Both /tmp/file2 and /tmp/file3 will contain the updates and will remain available.
Answer: C
For interactive and self-paced preparation of exam 000-104, try our practice exams.
65
Question: 198
Which command will display messages directed to the system console? A. alog -t console -o B. cat /var/adm/ras/conslog C. cat /var/log/all/console.log D. grep CONSOLE /var/adm/messages
For interactive and self-paced preparation of exam 000-104, try our practice exams.
66
C. truss D. trace
For interactive and self-paced preparation of exam 000-104, try our practice exams.
67
For interactive and self-paced preparation of exam 000-104, try our practice exams.
68
Which sequence of steps can be employed to debug the network-boot process? A. 1. Comment out the bootps entry from the /etc/inetd.conf file on the LPAR. 2. Stop all running processes. 3. Restart inetd using the 'refresh -s inetd' command. 4. Flush the ARP table on the NIM master. 5. Initiate the network boot of the LPAR. B. 1. Comment out the bootps entry from the /etc/inetd.conf file on the NIM master. 2. Stop all running bootpd processes. 3. Restart inetd using the 'refresh -s inetd' command. 4. Start bootpd from the command line : '/usr/sbin/bootpd -s -d -d -d' 5. Initiate the network boot of the LPAR. C. 1. Comment out the bootps entry from the /etc/inetd.conf file on the NIM master. 2. Stop all running bootpd processes. 3. Restart inetd using the 'refresh -s inetd' command. 4. Start bootpd from the command line : /usr/sbin/bootpd -g nfs -d -d d 5. Initiate the network boot of the LPAR. D. 1. Comment out the bootps entry from the /etc/inetd.conf file on the NIM master. 2. Stop all running bootpd processes. 3. Restart the effected daemons using the '/etc/rc.tcpip' command. 4. Start bootpd from the command line : '/usr/sbin/bootpd -s -d -d -d' 5. Initiate the network boot of the LPAR.
For interactive and self-paced preparation of exam 000-104, try our practice exams.
69
Answer: C
For interactive and self-paced preparation of exam 000-104, try our practice exams.
70
Question: 213
Which command will list all subsystem resources on a server? A. lssrc a B. lssrc g C. lssrc l D. lssrc -s
Answer: A
For interactive and self-paced preparation of exam 000-104, try our practice exams.
71