Академический Документы
Профессиональный Документы
Культура Документы
Copyright 2005, 2012 Oracle and/or its affiliates. All rights reserved. This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited. The information contained herein is subject to change without notice and is not warranted to be errorfree. If you find any errors, please report them to us in writing. If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable: U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data delivered to U.S. Government customers are "commercial computer software" or "commercial technical data" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, the use, duplication, disclosure, modification, and adaptation shall be subject to the restrictions and license terms set forth in the applicable Government contract, and, to the extent applicable by the terms of the Government contract, the additional rights set forth in FAR 52.227-19, Commercial Computer Software License (December 2007). Oracle America, Inc., 500 Oracle Parkway, Redwood City, CA 94065. This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group. This software or hardware and documentation may provide access to or information on content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services.
Contents
Release Notes for the Siebel 8.1.1.7 Fix Pack Whats New in This Revision 9 10 15 14 7
Quick Fixes Included in the Siebel 8.1.1.7 Fix Pack Enhancements and Updates in Version 8.1.1.7
Instructions for ACR 575 16 Configuration Instructions for ACR 575 Seed Data 17 List of Values 18 System Preferences 18 New Repository Objects 18 Changed Repository Objects 19 Business Components 27 Business Objects 41 Enabling Diary Configurable Icons 41 Copying Configurable Icons 47 Configuring the Application 48 Instructions for ACR 719B 48 Instructions for ACR 731 54 Instructions for ACR 750 57 Instructions for ACR 762 61 Instructions for ACR 802 67 Instructions for ACR 839 70
78
83
Siebel Fix Pack Installation Overview 79 Installing the Siebel Fix Pack on Microsoft Windows Installing the Siebel Fix Pack on UNIX 88
Configuring Slipstream Patch Installation 93 Postinstallation Tasks for the Siebel Server 94 Postinstallation Tasks for the Web Server 95 Postinstallation Tasks for High Interactivity Clients 95 Postinstallation Tasks for Supporting Additional Languages Uninstalling Siebel Fix Packs 97
96
99 100
Loyalty 131 Reports 133 Server Remote 139 Travel & Transportation
140
143
February 2012
NOTE: This guide documents the Quick Fixes, enhancements, instructions for enhancements, and bugs fixed in the Siebel 8.1.1.7 Fix Pack. For information about what was provided in the Siebel 8.1.1.1 through Siebel 8.1.1.4 Fix Packs, see Siebel Maintenance Release Guide, Version 8.1.1.x. For information about what was provided in the Siebel 8.1.1.5 and Siebel 8.1.1.6 Fix Packs, see Siebel Maintenance Release Guide, Version 8.1.1.5 and Siebel Maintenance Release Guide, Version 8.1.1.6. To access these guides, from within My Oracle Support, navigate to the Knowledge tab, and search for Article ID 880452.1. This guide includes the following topics: Release Notes for the Siebel 8.1.1.7 Fix Pack on page 7 Whats New in This Revision on page 8 Quick Fixes Included in the Siebel 8.1.1.7 Fix Pack on page 9 Enhancements and Updates in Version 8.1.1.7 on page 13 Configuration Instructions for Enhancements and Updates on page 14 Siebel Fix Pack Installation Instructions on page 78 Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack on page 100 Oracle Welcomes Your Comments on page 143
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Whats New in This Revision
Bug 13570979: Custom Name appears twice in the Report Output applet. Bug 13603930: The My BI Publisher Reports menu label was incorrectly changed. Bug 13528628: Unnecessary fields display in the Template applet. Bug 13604628: The Schedule Report menu item was incorrectly changed.
Workaround: Apply Siebel 8.1.1.7 QF0703 to resolve this issue, using the following procedure:
1 2 3
Within Siebel Tools, navigate to the XMLP Integration project, and lock it. Import the BIP_8117FP_Extension.sif file. Compile the SRF.
Search Functionality Not Working with OSES 11.1.2 After German Language Fix
Product: Siebel Apps - Search & Knowledge Management Component: Search - Oracle SES Subcomponent: Indexing Product Version: Siebel 8.1.1.7 Bug ID: 13559725 The fix for a German-language issue is not compatible with SES 11g and breaks basic search functionality. Workaround: Apply Siebel 8.1.1.7 QF0701 to resolve this issue. NOTE: For a comprehensive listing of all Siebel 8.1 Release Notes, see Siebel Release Notes on My Oracle Support (Article ID 557191.1).
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Quick Fixes Included in the Siebel 8.1.1.7 Fix Pack
This guide also provides information, instructions, and guidelines for installing Siebel Business Applications Siebel Fix Pack 8.1.1.x releases on top of version 8.1.1 or a prior 8.1.1.x release. Use this Siebel Maintenance Release Guide in conjunction with Siebel Bookshelf documents, particularly the Siebel Installation Guide for the operating system you are using. NOTE: Verify the availability and applicability of all Fix Pack or Quick Fix releases with Oracle Global Customer Support before you install. The information contained herein supersedes, for warranty and other purposes, the contents of all other documentation that may accompany this product, including the following: My Oracle Support (https://support.oracle.com) Siebel System Requirements and Supported Platforms on Oracle Technology Network (http://download.oracle.com/docs/cd/E11886_01/srsphomepage.html)
This Siebel Maintenance Release Guide contains information about the following: How to install the maintenance (Fix Pack) release Product configuration issues and workarounds for your application
NOTE: There may be references to functionality, products, platforms, and language support in this document that are not available as part of the products that your organization has licensed. Consult Oracle Global Customer Support on My Oracle Support with questions regarding the applicability of Siebel Maintenance Release Guide items to your deployment.
Additional Documentation
Oracle reserves the right to modify the documentation for Siebel Business Applications at any time. For related Siebel documentation, see the following: My Oracle Support (https://support.oracle.com) (requires valid customer account) Siebel System Requirements and Supported Platforms on Oracle Technology Network (http:// download.oracle.com/docs/cd/E11886_01/srsphomepage.html) Siebel Bookshelf for Oracles Siebel Business Applications, Version 8.1 (http://www.oracle.com/ technology/documentation/siebel.html) on Oracle Technology Network (OTN)
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Quick Fixes Included in the Siebel 8.1.1.7 Fix Pack
Siebel Quick Fix releases are developed to address immediate critical issues for specific customers, and can be installed on top of Fix Packs. Quick Fixes address a small number of defects, and the fixes are typically rolled into the next available Fix Pack for wider distribution to the Siebel Business Applications customer base. Testing for Quick Fixes is focused and is usually limited to verifying that the fix works on the specific platforms that the affected customer is running.
Table 2.
Quick Fixes Included in Version 8.1.1.7 Fix Request ID/Bug ID 10602141 10587344 12768536 13078962 10598080 10600732 10604265 12811808 13260213 13407108 11831498 12318058 12608701 12724391 12732696 12921815 12757030 12856680 12865401 12869363 12888652 13242025 13242164 Quick Fix Version 8.1.1 WM5 [21112_14 QF0156 QF01CP QF01CQ QF02BV QF02CJ QF02CQ QF02CS QF02CT QF02CU QF2203 QF2204 QF2207 QF2208 QF2209 QF2211 QF2212 QF2212 QF2212 QF2212 QF2212 QF2213 QF2213 Merged Into Fix Pack 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7
Change Request ID/ Base Bug ID 10602136 10587343 12577313 12937764 10598010 11869400 10604196 12570179 10558365 12772458 11818894 12312702 13419996 12733277 12807436 13419996 12756997 12857901 12876544 12876539 12906967 12962036 13090315
Fix Pack Base 8.1.1 WM5 [21112_14] 8.1.1.1 [21211] 8.1.1.1 [21211] 8.1.1.1 [21211] 8.1.1.2 [21215] 8.1.1.2 [21215] 8.1.1.2 [21215] 8.1.1.2 [21215] 8.1.1.2 [21215] 8.1.1.2 [21215] 8.1.1.2 [21215] 8.1.1.2 [21215] 8.1.1.2 [21215] 8.1.1.2 [21215] 8.1.1.2 [21215] 8.1.1.2 [21215] 8.1.1.2 [21215] 8.1.1.2 [21215] 8.1.1.2 [21215] 8.1.1.2 [21215] 8.1.1.2 [21215] 8.1.1.2 [21215] 8.1.1.2 [21215]
10
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Quick Fixes Included in the Siebel 8.1.1.7 Fix Pack
Table 2.
Quick Fixes Included in Version 8.1.1.7 Fix Request ID/Bug ID 13420013 13415880 12577231 12566947 12944899 13384875 13085632 13375871 12915223 10606139 10606139 12313396 12723709 12737165 12926026 12795350 12805266 12866175 12889120 12827015 12883388 12922188 13384866 13096035 12720131 11858120 12798488 Quick Fix Version QF2213 QF2213 QF03AY QF03BI QF03BP QF03BQ QF03BS QF03BV QF1303 8.1.1.3 WM5 [21219_4] 8.1.1.3 WM5 [21219_4] QF0421 QF0433 QF0438 QF0440 QF0443 QF0446 QF0448 QF0449 QF0450 QF0451 QF0452 QF0454 QF0458 8.1.1.4 WM5 21225_1 QF0502 QF0514 Merged Into Fix Pack 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7
Change Request ID/ Base Bug ID 13419996 13419996 12577313 12566908 10598010 13384850 13043868 12604183 12896102 10606138 10606138 12318676 10605987 12736823 12577313 12795298 12805219 12802129 12889047 12826991 10529645 10558365 13384850 12801963 10583904 11830300 11717572
Fix Pack Base 8.1.1.2 [21215] 8.1.1.2 [21215] 8.1.1.3 [21219] 8.1.1.3 [21219] 8.1.1.3 [21219] 8.1.1.3 [21219] 8.1.1.3 [21219] 8.1.1.3 [21219] 8.1.1.3 [21219] 8.1.1.3 WM5 [21219_4] 8.1.1.3 WM5 [21219_4] 8.1.1.4 [21225] 8.1.1.4 [21225] 8.1.1.4 [21225] 8.1.1.4 [21225] 8.1.1.4 [21225] 8.1.1.4 [21225] 8.1.1.4 [21225] 8.1.1.4 [21225] 8.1.1.4 [21225] 8.1.1.4 [21225] 8.1.1.4 [21225] 8.1.1.4 [21225] 8.1.1.4 [21225] 8.1.1.4 WM5 [21225_1] 8.1.1.5 [21229] 8.1.1.5 [21229]
11
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Quick Fixes Included in the Siebel 8.1.1.7 Fix Pack
Table 2.
Quick Fixes Included in Version 8.1.1.7 Fix Request ID/Bug ID 12945668 12766445 12643211 12823043 12838039 12726874 12865331 12857923 12934784 12848581 13008052 12942915 12790188 12931623 12829467 13039780 13384865 12937408 13105264 12780386 13324301 13076148 13026022 12964888 13436951 13505777 13114020 12873861 13106410 Quick Fix Version QF0515 QF0517 QF0520 QF0521 QF0522 QF0523 QF0526 QF0527 QF0530 QF0531 QF0532 QF0533 QF0536 QF0537 QF0538 QF0539 QF0547 QF0548 QF0549 QF0550 QF0551 QF0556 QF0557 QF0560 QF0563 QF0564 QF0565 QF0566 QF0601 Merged Into Fix Pack 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7 8.1.1.7
Change Request ID/ Base Bug ID 12937764 12577313 10537307 12705438 12833238 12711326 12865043 10585340 11767223 12822135 10534318 10558365 12750196 12629343 12800053 12879239 13384850 12937371 11682517 12772458 10605987 12567732 13019417 10595170 13391431 10591152 10598444 12810197 13085829
Fix Pack Base 8.1.1.5 [21229] 8.1.1.5 [21229] 8.1.1.5 [21229] 8.1.1.5 [21229] 8.1.1.5 [21229] 8.1.1.5 [21229] 8.1.1.5 [21229] 8.1.1.5 [21229] 8.1.1.5 [21229] 8.1.1.5 [21229] 8.1.1.5 [21229] 8.1.1.5 [21229] 8.1.1.5 [21229] 8.1.1.5 [21229] 8.1.1.5 [21229] 8.1.1.5 [21229] 8.1.1.5 [21229] 8.1.1.5 [21229] 8.1.1.5 [21229] 8.1.1.5 [21229] 8.1.1.5 [21229] 8.1.1.5 [21229] 8.1.1.5 [21229] 8.1.1.5 [21229] 8.1.1.5 [21229] 8.1.1.5 [21229] 8.1.1.5 [21229] 8.1.1.5 [21229] 8.1.1.6 [21233]
12
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Enhancements and Updates in Version 8.1.1.7
Table 2.
Quick Fixes Included in Version 8.1.1.7 Fix Request ID/Bug ID 13101755 13422290 13406439 Quick Fix Version QF0602 QF0604 QF0611 Merged Into Fix Pack 8.1.1.7 8.1.1.7 8.1.1.7
Table 3.
Enhancements and Updates in Version 8.1.1.7 Feature Enhancement or Certification Description Provides enhancements to Siebel Hospitality Diary functionality. Instructions for ACR 575
Certifies AIX 7.1. Certifies Oracle Enterprise Linux 6.0 64-bit. Certifies IBM DB2 v10 for z/OS. Provides the following enhancements: Improved upload functionality for multilingual reports Mobile client synchronization of report templates Ability to schedule parameterized reports Allows the UI applet sort order to be preserved in report output Report business service enhancements Parameterized reporting enhancements
13
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
Table 3.
Enhancements and Updates in Version 8.1.1.7 Feature Enhancement or Certification Description Supports Signature Capture using the CIC component on the Microsoft Windows 7 platform. Instructions for ACR 731
ACR 750
Provides SOAP and EJB fuctionality for Siebel Application Integration (SAI). Instructions for ACR 750
Provides a Data Quality sync switch. Ports SonGo Web services to the iSales application. Instructions for ACR 762
ACR 802
Provides Bulk Administration enhancements and redemption concurrency functionality. Instructions for ACR 802
ACR 839
Provides the following enhancements: Allows details about the geographical details of a site to be captured. Web services to provide information about protocols, sites, and site visits when they are created in CTMS to other applications that are used in biotechnology and pharmaceutical companies.
14
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
Perform the instructions described in the subtopics listed below after you install the current Siebel Fix Pack, as described in Siebel Fix Pack Installation Instructions on page 78. NOTE: For more information about activities performed in Siebel Tools, including importing archive (.sif) files, see Using Siebel Tools and Configuring Siebel Business Applications. For more information about activities performed in the Siebel application, see Siebel Applications Administration Guide and related books. These guides are available on the Siebel 8.1 Bookshelf on OTN at http:// www.oracle.com/technology/documentation/siebel.html. This topic contains the following subtopics: Instructions for ACR 575 on page 15 Instructions for ACR 719B on page 48 Instructions for ACR 731 on page 54 Instructions for ACR 750 on page 57 Instructions for ACR 762 on page 61 Instructions for ACR 802 on page 67 Instructions for ACR 839 on page 70
1 2 3 4 5 6
Log into Siebel Tools, query for the TNT SHM Function Space Diary and TNT SHM Compact Function Space Diary projects, and lock them. In the Object Explorer, click on the Applet object. Click on any record on the right-hand side, and query for the TNT SHM Function Space Diary applet. Right-click and lock the applet. Click the + sign to expand the applet. Click on the Applet User Prop subobject, and create the following new user properties and values.
15
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
7 8 9
Query for the TNT SHM Compact Function Space Diary applet. Right-click and lock the applet. Click the + sign to expand the applet.
10 Click on the Applet User Prop subobject, and create the following new user properties and values:
Name: Disable Right Click Menu Item 2 Value: Assign to Specific Space
11 Query for the TNT SHM Function Space Diary Total Availability Applet applet 12 Right-click and lock the applet. 13 Click the + sign to expand the applet. 14 Click on the Applet User Prop subobject, and create the following new user properties and values:
Name: Disable Right Click Menu Item 2 Value: Assign to Specific Space
15 Compile the TNT SHM Function Space Diary, TNT SHM Compact Function Space Diary, and TNT
SHM Function Space Diary Total Availability Applet objects to the SRF.
16
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
Seed Data
1
Navigate to List of Values Explorer > List of Values - Types. List Of Values Explorer > List Of Values - Types Replication Level All Multilingual TRUE Translate TRUE
List of Values
Type TNT_SHM_GNTAX_FS_TYPE_TOGGLE TNT_SHM_GNTAX_FS_TYPE_TOGGLE TNT_SHM_GNTAX_FS_TYPE_TOGGLE TNT_SHM_GNTAX_FSD_DSP_TOGGLE Display Value All Specific Space Special Location Inventory Status LIC ALL SPECIFIC_SPACE SPECIAL_LOCATI ON 17 Language Name English American English American English American English American Order 1 2 3 10 Active TRUE TRUE TRUE TRUE Translat e TRUE TRUE TRUE TRUE
System Preferences
System Preference Name TNT CMT Special Location Pref ACR495 Space Hold ACR450 Change Diary Start Date TNT CMT Configurable Icons GntAXCtrl:Color Display Toggle TNT CMT Func Spaces Cache Size TNT CMT Memory Utilization System Preference Value Y Y N Y INVENTORY_STATUS 1000 Y Description
17
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
1 2 3 4
Uncompress the 8.1.1.2_Hospitality_Enhancements.zip file to create the 8.1.1.2_Diary_Porting folder. Create a log folder in the \REPPATCH\8.1.1.2_Diary_Porting\REPOSITORY directory. Rename the Picklist folder to Pick List. Run the import. bat file to import the following:From the 8.1.1.2_Hospitality_Diary_Enhancements.zip folder, import the following SIF files using the Merge option:
Applets:
TNT SHM Copy Function Option/Overbook Popup Applet TNT SHM Diary Add Function Parameter Popup Applet TNT SHM Diary Copy Function Parameter Popup Applet TNT Proposed Function Space Pick Applet TNT Move Function Popup Applet
Business components:
TNT SHM Add Copy Function Parameter VBC TNT Move Function VBC TNT Configured Space
Commands
Picklists:
TNT Quote PickList TNT SHM FSD Function Space Type PickList TNT Proposed Function Space Picklist
Symbolic strings:
Classes:
CSSBCVRecMoveFunction
18
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
CSSSWEFrameTNTMoveFuncPopup CSSSWEFrameTNTSIAAssocList
Applets
The following tables describe the applets associated with ACR 575.
19
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
TNT SHM Function Space Diary Table 4. TNT SHM Function Space Diary Applet TNT SHM Function Space Diary Class Project BusComp Title Type HTML Number Of Rows Standard CSSSWEFrameSHMAxDiary TNT SHM Function Space Diary TNT SHM Gantt AX Date Time Interval PopUp VBC
Table 5. Applet User Properties New/ Modified New New New New New New New New New New Name Ignore Case Sensitivity Item Time Display Toggle Time Label 10 Item Time Display Toggle Time Label 11 Item Time Display Toggle Time Label 12 Item Time Display Toggle Time Label 13 Item Time Display Toggle Time Label 14 Item Time Display Toggle Time Label 15 Item Time Display Toggle Time Label 16 Item Time Display Toggle Time Label 17 Item Time Display Toggle Time Tooltip 17 Value Y Account Name Calculated Guaranteed Calculated Function Start Date Calculated Function Day Calculated Decision Date Calculated Total Catering Revenue Calculated Function Space Calculated Inventory Status Calculated Booking Set Up Tip;Booking Tip Function Name;Booking Tear Down Tip;Booking Tear Down Tip 2 Existing Value: 3 Existing Value
Modified
Max X Pages
20
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
Table 5. Applet User Properties New/ Modified Modified New New New Modified New Name Max Y Rows Per Page Number of Rows to Overlap Transient Suite Field Y-Axis Drill Down Enable Y-Axis Width TNT Same Time Frame - Show Move Popup Applet Value 25 1 Is Transient Suite Y Function Space Column Size Y Existing Value: 150 Existing Value Existing Value: 15
21
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
Table 6. Controls
HTML Icon Map/HTML Type Text
New/Modified New
Existing Value
New
Go To Go To
Go To SBL_GO_TO-1004233041-4MM HTML Height: 560 HTML Width: 960 HTML Height: 456 Existing HTML Width: 960
Modified
GanttChart
Modified
RunTime= True
Table 7. Applet Method Menu Item New/ Modified New Command TNT SHM InvokeAssignDayPopup Menu Text Position Assign SBL_ASSIGN-1004224603-02B Position 6
New
Applet Web Template Item NOTE: Add the newly-added control to display in the UI.
22
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
TNT SHM Compact Function Space Diary Table 8. TNT SHM Compact Function Space Diary TNT SHM Compact Function Space Diary Class Project Bus Comp Title Type HTML Number of Rows Standard CSSSWEFrameSHMAxCompactDiary TNT SHM Compact Function Space Diary TNT SHM Gantt AX Date Time Interval PopUp VBC
Table 9. Applet User Properties New/Modified New New New New New New New New New Modified Modified New New Name Ignore Case Sensitivity Item Time Display Toggle Time Label 10 Item Time Display Toggle Time Label 11 Item Time Display Toggle Time Label 12 Item Time Display Toggle Time Label 13 Item Time Display Toggle Time Label 14 Item Time Display Toggle Time Label 15 Item Time Display Toggle Time Label 16 Item Time Display Toggle Time Label 17 Max X Pages Max Y Rows Per Page Number of Rows to Overlap Transient Suite Field Value Y Account Name Calculated Guaranteed Calculated Function Start Date Calculated Function Day Calculated Decision Date Calculated Total Catering Revenue Calculated Function Space Calculated Inventory Status Calculated 2 25 1 Is Transient Suite 3 15 Existing Value
23
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
Table 9. Applet User Properties New/Modified New Modified New Name Y-Axis Drill Down Enable Y-Axis Width TNT Same Time Frame Show Move Popup Applet Value Y Function Space Column Size Y 150 Existing Value
Modified
GanttChart
New
Go To Go To
Go To SBL_GO_TO-1004233041-4MM
RunTime= True
Modified
Table 11. Applet Method Menu Item New/ Modified New Command TNT SHM InvokeAssignDayPopup Menu Text Position Assign SBL_ASSIGN1004224603-02B Position 6 Comment New
Applet Web Template Item NOTE: Add the newly-added control to display in the UI.
24
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
TNT SHM Gantt AX Admin Form Applet Table 12. TNT SHM Gantt AX Form Applet
CSSFrame TNT SHM Function Space Diary TNT SHM Gantt AX Admin Specialized Controls FSD Administration Standard
Comment
New
FormSection
Runtime = TRUE
Applet Web Template Item NOTE: Add the newly-added control to display in the UI.
25
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
TNT SHM FSD User Preferences Table 14. TNT SHM FSD User Preference
Name/Field TNTCMTDiary/ Function Space Column Size TNT CMT Diary/ Function Space Column Size
Runtime
Comment New
New
Text
Runtime = TRUE
Modified
Booking Color Schema TNT CMT Diary/ Booking Color Toggle Schema
Text
Applet Web Template Item NOTE: Add the newly-added control to display in the UI.
26
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
TNT SHM Function Assoc Applet Table 16. TNT SHM Function Assoc Applet
CSSSWEFrameTNTSIAAssocList TNT SHM Function TNT SHM Function Add Functions Association List
TNT SHM Function Order Mvg Applet Table 17. TNT SHM Function Order Mvg Applet
Table 18. Controls Name/Field Add - Shuttle Caption Add > HTML Icon Map/ HTML Type Method Invoked AddOrder Existing Value .AddRecords
Business Components
The following tables describe some of the business components associated with ACR 575.
27
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
Internal Product
Table 19. Business Component User Properties New/ Modified New Name TNT Room Search Spec Value ([Type] = LookupValue('PRODUCT_TYPE', 'Indivisible') OR [Type] = LookupValue('PRODUCT_TYPE', 'Configured') OR [Type] = LookupValue('PRODUCT_TYPE', 'Category') OR [Type] = LookupValue('PRODUCT_TYPE', 'Suite')) Comments Diary Performance Issue
28
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
Calculated True
New
DTYPE_TEXT
New
DTYPE_TEXT
New New
TNT Proposed Function Date TNT Proposed Function End Time TNT Proposed Function Space TNT Proposed Function Space Id TNT Proposed Function Start Time TNT Same Function Space Function Space Event Check Id Function Space Order Item Id
True True
DTYPE_TEXT DTYPE_TEXT
New
True
DTYPE_TEXT
New
True
DTYPE_TEXT
New
True
DTYPE_TEXT
New
True
DTYPE_BOOL
New
New
29
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
Table 21. Function Space Event Check Join New/Modified New Join Specification Name Event Check Id Destination Column ROW_ID Source Column Function Space Event Check ID Table S_INVOICE Alias Function Space Event Check Outer Join Flag True
Table 22. Order Item TNTX Join New/Modified New Join Specification Name Par Row Id Destination Column PAR_ROW_ID Source Column Function Space Order Item Id Table S_ORDERITM_TNTX Alias Order Item TNTX Outer Join Flag True
Table 23. Order Item Join New/Modified New Join Specification Name Function Id Function Space Id Destination Column FUNCTION_ID PROD_ID Source Column Function Id Function Space Id Table S_ORDER_ITEM Alias Order Item Outer Join Flag True
30
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
User Preferences
Table 24. Fields
New/ Modified New Field Name TNT CMT Diary/ Booking Color Toggle Schema TNT CMT Diary/ Function Space Column Size TNT CMT Diary/ Function Space Type 4TRUE Calculated TRUE Required Predefined Value Picklist TNT FSD Color Schema PickList True 150 Type DTYPE_TEXT
New
DTYPE_NUMBER
New
DTYPE_TEXT
Table 25. Pick Maps Parent Field TNT CMT Diary/ Booking Color Toggle Schema TNT CMT Diary/ Function Space Type Sequence BC - ) Field Picklist Field Value Constrain No Clear
Value
31
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
Table 27. Property Join New/Modified New Join Specification Name Property Id Destination Column PAR_ROW_ID Source Column Primary Organization Id Table S_ORG_EXT Alias Property Outer Join Flag True
32
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
Table 28. S_ORG_EXT Join New/Modified New Join Specification Name Account Id Destination Column PAR_ROW_ID Source Column Account Id Table S_ORG_EXT Alias S_ORG_EXT Outer Join Flag True
New
Calculated = TRUE
DTYPE_TEXT
Table 30. Pick Maps Parent Field Function Space Type - Query BC - ) Field Function Space Type - Query Picklist Field Value
Table 31. User Properties New/Modified New New New Modified Modified Name Activation Field 1 Activation Field 2 Default Function Space Type Scale Unit Major Scale Unit Minor Modified Value Go To Function Space Type - Query Specific Space 1;1;2;1;4;.75;8;1;16;2;32;1;64;1;128 ;1;256;1 1;1;2;1;4;.75;8;1;16;2;32;1;64;1;128 ;1;256;1
33
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
Table 31. User Properties New/Modified Modified Modified Modified Modified Name Segments Per Page Major Segments Per Page Minor Units Per Segment Major Units Per Segment Minor Modified Value 1;1;2;1;4;1;8;1;16;1;32;2;64;30;128;8;256;8 1;8;2;1;4;24;8;24;16;48;32;8;64;30;128;8;256 ;8 1;7;2;1;4;1;8;0.5;16;0.25;32;28;64;1 ;128;1;256;7 1;1;2;1;4;0.0416666666666666;8;0.02083333 3333333334;16;0.010416666666666666;32;7; 64;1;128;1;256;7 Y
New
Table 33. Pick Maps Parent Field Booking Color Toggle Schema Color Display Toggle BC > Field Booking Color Toggle Schema Color Display Toggle Picklist Field Value Value
34
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
Table 35. User Properties New / Modified New New New New New New New New New New New Name Copy Function Field 11 Copy Function Field 12 Copy Function Field 13 Copy Function Field 14 Copy Function Field 15 Copy Function Field 16 Copy Function Field 17 Copy Function Field 18 Copy Function Field 19 Copy Function Field 20 Copy Function Field 21 Value "FN_TYPE_ID", "Function Type Id" "FN_TYPE", "Function Type" "SETUP_STYLE", "Setup Style" "EXP_NUM", "Expected Num" "GUARNT_NUM", "Guaranteed Num" "SET_NUM", "Set Num" "NEG_RM_RENTAL", "TNT CMT Negotiated Room Rental" "FLOW_FLAG", "Flow Flag" "DO_NOT_POST_FLAG", "TNT CMT Do Not Post Flag" "NOISE_FLAG", "Noise Flag" "FUNCTION_SPACE", "Active Function Space"
35
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
Modified
DTYPE_TEXT
Existing Value
Backup Space Total Catering Revenue Total Catering Revenue Field Name Tip IIf([Total Catering Revenue] IS NOT NULL, LookupValue('TNT_SHM _TOOLTIP_OBJECTS', 'Total Catering Revenue') + ": " , "") [Total Catering Revenue Field Name Tip] + [Total Catering Revenue] + IIF([Total Catering Revenue] IS NULL,"","\r\n") IIF([Booking Type] = LookupValue('TNT_SHM _BOOKING_TYPE','Back up'), [Active Function Space], [Backup Space])
DTYPE_TEXT DTYPE_TEXT
New
DTYPE_TEXT
New
DTYPE_TEXT
36
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
Calculated Value/ Join.Column [Function Space Field Name Tip] + [Function Space Tip Field Value] + IIF([Function Space Tip Field Value] IS NULL,"","\r\n") IIF([Function Space Tip Field Value] IS NOT NULL, LookupValue('TNT_SHM _TOOLTIP_OBJECTS', 'Backup Space/Pri Space Link') + ": " , "") IIF([Guaranteed] IS NOT NULL, LookupValue('TNT_SHM _TOOLTIP_OBJECTS', 'Guaranteed') + ": " , "") [Guaranteed Field Name Tip] + [Guaranteed] + IIF([Guaranteed] IS NULL,"","\r\n")
Existing Value
New
DTYPE_TEXT
New
DTYPE_TEXT
New
Guaranteed Tip
DTYPE_TEXT
New Modified
Peak Rooms Peak Rooms Field Name Tip IIF([Peak Rooms] IS NOT NULL, LookupValue('TNT_SHM _TOOLTIP_OBJECTS ', 'Peak Rooms') + ": " , "") [Peak Rooms Field Name Tip] + [Peak Rooms] + IIF([Peak Rooms] IS NULL,"","\r\n") [Function Name Tip] + [Quote Name Tip] + [Function Type Tip] + [Function Status Tip] + [Booking Start End Tip 2] + [Setup Style Tip] + [Decision Date Tip] + [Meal Period Tip] + [Sales Manager Tip] + [Event Manager Tip] + [Expected Num Tip] + [Addl Tip] [Function Name Tip] + [Quote Name Tip] + [Function Type Tip] + [Function Status Tip] + [Booking Start End Tip 2] + [Setup Style Tip] + [Decision Date Tip] + [Meal Period Tip] + [Sales Manager Tip] + [Event Manager Tip] + [Expected Num Tip]
DTYPE_INTEGER DTYPE_TEXT
Modified
DTYPE_TEXT
Modified
DTYPE_TEXT
37
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
Calculated Value/ Join.Column [Function Name Tip] + [Quote Name Tip] + [Business Type Tip]+ [Function Type Tip] + [Function Status Tip] + [Booking Start End Tip 2] + [Setup Style Tip] + [Decision Date Tip] + [Meal Period Tip] + [Sales Manager Tip] + [Expected Num Tip] + [Addl Tip]
Existing Value [Function Name Tip] + [Quote Name Tip] + [Business Type Tip]+ [Function Type Tip] + [Function Status Tip] + [Booking Start End Tip 2] + [Setup Style Tip] + [Decision Date Tip] + [Meal Period Tip] + [Sales Manager Tip] + [Expected Num Tip] [Quote Name Tip] + [Business Type Tip]+ [Function Type Tip] + [Function Status Tip] + [Booking Start End Tip 2] + [Setup Style Tip] + [Decision Date Tip] + [Meal Period Tip] + [Sales Manager Tip] + [Event Manager Tip] + [Expected Num Tip] [Function Name Tip] + [Quote Name Tip] + [Business Type Tip] + [Function Type Tip] + [Booking Start End Tip 2] + [Setup Style Tip] + [Decision Date Tip] + [Meal Period Tip] + [Sales Manager Tip] + [Event Manager Tip] + [Expected Num Tip]
Modified
[Quote Name Tip] + [Business Type Tip]+ [Function Type Tip] + [Function Status Tip] + [Booking Start End Tip 2] + [Setup Style Tip] + [Decision Date Tip] + [Meal Period Tip] + [Sales Manager Tip] + [Event Manager Tip] + [Expected Num Tip] + [Addl Tip]
DTYPE_TEXT
Modified
[Function Name Tip] + [Quote Name Tip] + [Business Type Tip] + [Function Type Tip] + [Booking Start End Tip 2] + [Setup Style Tip] + [Decision Date Tip] + [Meal Period Tip] + [Sales Manager Tip] + [Event Manager Tip] + [Expected Num Tip] + [Addl Tip]
DTYPE_TEXT
38
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
Calculated Value/ Join.Column [Function Name Tip] + [Quote Name Tip] + [Business Type Tip] + [Function Status Tip] + [Booking Start End Tip 2] + [Setup Style Tip] + [Decision Date Tip] + [Meal Period Tip] + [Sales Manager Tip] + [Event Manager Tip] + [Expected Num Tip] + [Addl Tip]
Existing Value [Function Name Tip] + [Quote Name Tip] + [Business Type Tip] + [Function Status Tip] + [Booking Start End Tip 2] + [Setup Style Tip] + [Decision Date Tip] + [Meal Period Tip] + [Sales Manager Tip] + [Event Manager Tip] + [Expected Num Tip] [Function Name Tip] + [Quote Name Tip] + [Business Type Tip] + [Function Type Tip] + [Function Status Tip] + [Booking Start End Tip 2] + [Setup Style Tip] + [Decision Date Tip] + [Sales Manager Tip] + [Event Manager Tip] + [Expected Num Tip] [Function Name Tip] + [Business Type Tip] + [Function Type Tip] + [Function Status Tip] + [Booking Start End Tip 2] + [Setup Style Tip] + [Decision Date Tip] + [Meal Period Tip] + [Sales Manager Tip] + [Event Manager Tip] + [Expected Num Tip]
Modified
[Function Name Tip] + [Quote Name Tip] + [Business Type Tip] + [Function Type Tip] + [Function Status Tip] + [Booking Start End Tip 2] + [Setup Style Tip] + [Decision Date Tip] + [Sales Manager Tip] + [Event Manager Tip] + [Expected Num Tip] + [Addl Tip]
DTYPE_TEXT
Modified
[Function Name Tip] + [Business Type Tip] + [Function Type Tip] + [Function Status Tip] + [Booking Start End Tip 2] + [Setup Style Tip] + [Decision Date Tip] + [Meal Period Tip] + [Sales Manager Tip] + [Event Manager Tip] + [Expected Num Tip] + [Addl Tip]
DTYPE_TEXT
39
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
Calculated Value/ Join.Column [Function Name Tip] + [Quote Name Tip] + [Business Type Tip]+ [Function Type Tip] + [Function Status Tip] + [Booking Start End Tip 2] + [Setup Style Tip] + [Decision Date Tip] + [Meal Period Tip] + [Event Manager Tip] + [Expected Num Tip] + [Addl Tip]
Existing Value [Function Name Tip] + [Quote Name Tip] + [Business Type Tip]+ [Function Type Tip] + [Function Status Tip] + [Booking Start End Tip 2] + [Setup Style Tip] + [Decision Date Tip] + [Meal Period Tip] + [Event Manager Tip] + [Expected Num Tip] [Function Name Tip] + [Quote Name Tip] + [Business Type Tip] + [Function Type Tip] + [Function Status Tip] + [Booking Start End Tip 2] + [Decision Date Tip] + [Meal Period Tip] + [Sales Manager Tip] + [Event Manager Tip] + [Expected Num Tip]
Modified
[Function Name Tip] + [Quote Name Tip] + [Business Type Tip] + [Function Type Tip] + [Function Status Tip] + [Booking Start End Tip 2] + [Decision Date Tip] + [Meal Period Tip] + [Sales Manager Tip] + [Event Manager Tip] + [Expected Num Tip] + [Addl Tip]
DTYPE_TEXT
Modified Modified
Inventory Status Inventory Status Calculated [Inventory Status] + ' ' + IIF([Function Revision Type] = LookupValue('TNT_SHM _REVISION_TYPE','REVI SED'), ' -' + LookupValue('TNT_SHM _REVISION_TRANS_TY PE',[Function Revision Type]),'')
40
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
Business Objects
The following tables describe the SHM Site and Quote business object components associated with ACR 575.
SHM Site
Table 39. Business Object Component Name TNT Configured Space TNT Move Function VBC TNT SHM Add Copy Function Parameter VBC Link
Quote
Table 40. Business Object Component Name TNT SHM Function Orders - DTU Link
Seed Data 1
1
Launch the Siebel application.
41
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
From the Site Map, navigate to Administration - Application > System Preferences, and create a new system preference with the following values:
Sys Pref Name: TNT CMT Configurable Icons Sys Pref Value: Y
NOTE: If the System preference value is "Y", then only you can configure your own icons.
Instruction 1
The following section contains information about how to create your own icons. The icon name, type, height, and width should be the values detailed below.
1. Name: ind_noise Type: BMP Width: 12 Pixel Height: 12 Pixel Description: Indicates that the current booking is going to be noisy and may disturb other guests. Displayed on the booking indicator bar if space permits.
2. Name: ind_24hr_hold Type: BMP Width: 12 Pixel Height: 11 Pixel Function: Indicates that the current function space is on hold for 24 hours. Displayed on the booking indicator bar if space permits.
3. Name: ind_dont_move Type: BMP Width:12 Pixel Height:11 Pixel Function: Indicates that the current booking should not be moved from the specified function space. Displayed on the booking indicator bar if space permits.
42
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
4. Name: hier_tee_ltr_d Type: BMP Width: 18 Pixel Height: 18 Pixel Function: Indicate to display the hierarchical function spaces.
5. Name: hier_space Type: BMP Width: 18 Pixel Height: 18 Pixel Function: Indicate to display the hierarchical function spaces.
6. Name: hier_collapse_ltr_d Type: BMP Width: 18 Pixel Height: 18 Pixel Default Icon: Function: Indicate to display the hierarchical function spaces.
7. Name: hier_expand_ltr_d Type: BMP Width:18 Pixel Height:18 Pixel Function: Indicate to display the hierarchical function spaces.
8. Name: hier_exp_tee_ltr_d Type: BMP Width:18 Pixel Height:18 Pixel Function: Indicate to display the hierarchical function spaces.
43
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
9. Name: hier_exp_elbow_ltr_d Type: BMP Width: 18 Pixel Height: 18 Pixel Function: Indicate to display the hierarchical function spaces.
10. Name: hier_elbow_ltr_d Type: BMP Width: 18 Pixel Height: 18 Pixel Function: Indicate to display the hierarchical function spaces.
11. Name: hier_coll_tee_ltr_d Type: BMP Width: 18 Pixel Height: 18 Pixel Default Icon: Function: Indicate to display the hierarchical function spaces.
12. Name: hier_coll_elbow_ltr_d Type: BMP Width: 18 Pixel Height: 18 Pixel Function: Indicate to display the hierarchical function spaces.
13. Name: Ind_detail_marker Type: BMP Width: 12 Pixel Height: 11 Pixel Function: Indicates that the current booking is a detailed function. Displayed on the booking indicator bar if space permits. NOTE: If this icon is displayed next to a function space name on the y-axis, this indicates that it is a specific space that does not belong to any category.
44
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
14. Name: ind_sleep Type: BMP Width: 12 Pixel Height: 11 Pixel Function: To indicate the sleeping room.
15. Name: Ind_fnctn_schedule_marker Type: BMP Width: 12 Pixel Height: 11 Pixel Function: To Indicate the function Scheduled marker.
16. Name: ind_recurring Type: BMP Width: 12 Pixel Height: 11 Pixel Function: Indicates that the current booking is part of a series of recurring events.
17. Name: ind_host_booking Type: BMP Width: 12 Pixel Height: 11 Pixel Function: Indicates that the current booking is a host booking. Displayed on the booking indicator if space permits.
18. Name: ind_affiliates_booking Type: BMP Width: 12 Pixel Height: 11 Pixel Function: Indicates that the current booking is an affiliate booking. Displayed on the booking indicator bar if space permits.
45
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
19. Name: ind_backup_req Type: BMP Pixel Width: 12 Pixel Height: 11 Pixel Function: Indicates that current function space requires a backup function space. Displayed next to the function space name on the y-axis.
20. Name: Diary_PageDown_Enabled Type: BMP Width: 16 Pixel Height: 16 Pixel Function: Indicates that Page Down is enabled.
21. Name: Diary_PageUp_Enabled Type: BMP Width: 16 Pixel Height: 16 Pixel Function: Indicates that the Scroll Page Up button is enabled.
22. Name: Diary_PageDown_Disabled Type: BMP Width: 16 Pixel Height: 16 Pixel Function: Indicates that the Scroll Page Down button is disabled.
23. Name: Diary_PageUp_Disabled Type: BMP Width: 16 Pixel Height: 16 Pixel Function: Indicates that the Scroll Page Up button is disabled.
46
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
24. Name: ind_holiday Type: BMP Width: 12 Pixel Height: 11 Pixel Function: Indicates that the date is a holiday. This icon appears in all Function Space Diary views except the Month/Day view, where holidays are indicated only by the changed cell color specified in the Function Space Diary Administration screen.
25. Name: ind_Red_Icon Type: BMP Width:06 Pixel Height:06 Pixel Function: This icon marks special events in the Month/Day view.
26. Name: ind_sell_note Type: BMP Width: 12 Pixel Height: 11 Pixel Function: Indicates that sell note is associated with the date. This icon appears in all Function Space Diary views except the Month/Day view, where sell notes are indicated only by bold text.
27. Name: ind_special_events Type: BMP Width: 12 Pixel Height: 11 Pixel Function: Indicates that the date is a special event. This icon appears in all Function Space Diary views, except the Month/Day view, where special events are indicated only by small red triangle in the upper right corner of the cell.
47
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
NOTE: The preceding instructions are specific to the English (ENU) language. If you are using another language, copy the icons into your specific language folder. For example, if you have deployed the icons in Spanish (SPA) language, copy the icons into the spa\images folder.
a b c d
Within Internet Explorer, navigate to Tools > Internet Options. Select the General tab, and click Settings. Click View Objects to open a window that contains all of the downloaded files. Select Diary ActiveX DLL and delete it.
1 2 3
Applying Repository Changes for ACR 719B on page 49 Applying Schema Changes for ACR 719B on page 51 Applying Seed Data Changes for ACR 719B on page 52
48
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
Make sure that you have an existing Siebel CRM version 8.1.1 or later environment and have applied Siebel Fix Pack 8.1.1.7 For information about installing Siebel CRM, see Siebel Installation Guide for the operating system you are using. For information about installing the Fix Pack, see Siebel Fix Pack Installation Instructions on page 78.
2 3 4
Stop the Siebel Services. Copy the existing .SRF file as a backup. Edit the Siebel Tools configuration file by doing the following:
In the [Siebel] section of the tools.cfg file (in the SIEBEL_TOOLS_ROOT\BIN\LANG directory), set the SymStrPrefix parameter to SBL_. NOTE: You must change this parameter back to its original value of X_ at a later time. For more information about the SymStrPrefix parameter, see the topic on symbolic strings in Using Siebel Tools.
b c 5 6
From the SIEBEL_TOOLS_ROOT\REPPATCH directory, extract the BIP_8117.zip file. Import an archive file to apply the repository changes by doing the following:
XMLP Integration Table XMLP Symbolic Strings Reports UI User Preferences Activity Activity (CC) (Siebel Industry Applications) LS Pharma Calendar Siebel Universal Agent Siebel Sales Enterprise Locale Table Locale
49
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
Dock XMLP
NOTE: If the XMLP Integration project is inactive, activate it by unchecking the Inactive checkbox. Additionally, if projects and objects are not locked when you import SIF files, a message appears indicating which object or project is to be locked. In such a case, lock the project or object, and then import the SIF file again.
Navigate to SIEBEL_TOOLS_ROOT\REPPATCH\BIP_8117FP\REPOSITORY, and edit the import.bat file to provide the following values:
SET TOOLSPATH = SIEBEL_TOOLS_ROOT SET DATASRC = data_source SET USERNAME = db_name SET PASSWORD = db_password
where:
SIEBEL_TOOLS_ROOT is the Siebel Tools installation path server_database is the DataSourceName from the tools.cfg file for the ServerDataSrc parameter
Run import.bat from the command prompt. NOTE: The BIP Calendar report project is available in Siebel Tools once you have imported the .sif file.
For multilingual implementations, change the language settings in Siebel Tools for each language used before compiling. For example, you would do the following to compile changes for French:
a b c d
Navigate to the View menu, then the Options menu item. Click the Language Settings tab. From the Language drop-down list, choose the desired language (FRA in this example), and then click OK. When you compile, choose the .srf file from the appropriate language folder. For this example, you would choose:
SIEBSRVR_ROOT\siebsrvr\OBJECTS\FRA\siebel_sia.srf
e 8
Copy the browser scripts generated from the compiled SRF into the relevant Web folder by doing the following:
a b c
Clear the existing folders in the language directory in the Siebel Tools installation directory (SIEBEL_TOOLS_ROOT\public\LANG). In Siebel Tools, compile the following object:
XMLP Integration
Navigate back to the Siebel Tools language directory and verify a new srfXXXXXXX_XXX folder was created, where X is an automatically generated number.
50
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
d e
Copy this folder to the SWSE\public\LANG directory. If you have a multi-language environment, repeat the above steps for each language in your deployment.
1 2
In Siebel Tools in the Object Explorer, select the Table object. Query for all changed tables to make sure the following tables appear in the Tables list:
3 4
Click Apply/DDL, click Apply again, and then click OK. In the Apply Schema dialog box, select Current Query from the Tables drop-down list, enter the values for the database user, database user password, and the ODBC data source using the appropriate query and action for your database, and then click Apply.
51
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
Database Oracle
Database User and Password Query for dbtableowner in the temp.ini file and then apply that value as the database user and password Query for databasename in the temp.ini file and then apply that value as the database user and password as MSSQL. Provide db2 as the user and password for the Siebel application.
ODBC Data Source By default, this is set to either SSD Local Db default instance or Siebel_DSN. By default, this is set to either SSD Local Db default instance or Siebel_DSN. By default, this is set to either SSD Local Db default instance or Siebel_DSN.
MSSQL
DB2
Database Oracle
Database User and Password Query for dbtableowner in the temp.ini file and then apply that value as the database user and password. Query for databasename in the temp.ini file and then apply that value as the database user and password as MSSQL. Provide db2 as the user and password for the Siebel application.
ODBC Data Source By default, this is set to either SSD Local Db default instance or Siebel_DSN. By default, this is set to either SSD Local Db default instance or Siebel_DSN. By default, this is set to either SSD Local Db default instance or Siebel_DSN.
MSSQL
DB2
dataimp /u user_name /p password /f SIEBEL_TOOLS_ROOT\REPPATCH\BIP_8117FP\SEED_DATA\SEED_DATA_8113\SIA\SIAB IP_8113FP_Seed_Locale_ENU.dat /l SIEBEL_TOOLS_ROOT\TEMP\dataimp_seed.log /c data_source /d tableowner /e y /h log /w y /i SIEBEL_TOOLS_ROOT\REPPATCH\BIP_8117FP\SEED_DATA\SEED_DATA_8113\SIA\SIAB IP8113FP_SeedInps\database_type\SIABIP_8113FP_Seed_Locale_ENU.inp
To import 8.1.1.3 seed data for languages other than ENU for SIA:
52
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
dataimp /u user_name /p password /f SIEBEL_TOOLS_ROOT\REPPATCH\BIP_8117FP\SEED_DATA\SEED_DATA_8113\SIA\SIAB IP_8113FP_Seed_Locale_ADDITIONAL_LANG.dat /l SIEBEL_TOOLS_ROOT\TEMP\dataimp_seed.log /c data_source /d tableowner /q -1 /w n /e y /t n /x R /n 100 /h log
To import 8.1.1.3 seed data for SEA, navigate to SIEBEL_TOOLS_ROOT\BIN, and execute the following commands: NOTE: You need to import 8.1.1.3 seed data if you are deploying Siebel Reports for the first time. Ignore this step if you are upgrading from 8.1.1.4, 8.1.1.5, or 8.1.1.6 to 8.1.1.7.
dataimp /u user_name /p password /f SIEBEL_TOOLS_ROOT\REPPATCH\BIP_8117FP\SEED_DATA\SEED_DATA_8113\HOR\HO RBIP_8113FP_Seed_Locale_ENU.dat /l SIEBEL_TOOLS_ROOT\TEMP\dataimp_seed.log / c data_source /d tableowner /e y /h log /w y /i SIEBEL_TOOLS_ROOT\REPPATCH\BIP_8117FP\SEED_DATA\SEED_DATA_8113\HOR\HO RBIP8113FP_SeedInps\database_type\HORBIP_8113FP_Seed_Locale_ENU.inp
To import 8.1.1.3 seed data for languages other than ENU for SEA, run the following command:
dataimp /u user_name /p password /f SIEBEL_TOOLS_ROOT\REPPATCH\BIP_8117FP\SEED_DATA\SEED_DATA_8113\HOR\HO RBIP_8113FP_Seed_Locale_ADDITIONAL_LANG.dat /l SIEBEL_TOOLS_ROOT\TEMP\dataimp_seed.log /c data_source /d tableowner /q -1 /w n /e y /t n /x R /n 100 /h log
NOTE: You must repeat the preceding command for each language in your deployment.
To import 8.1.1.6 seed data for ENU for SIA, run the following command: NOTE: You need to import seed data if you are deploying Siebel Reports for the first time or if you are upgrading from 8.1.1.3, 8.1.1.4, or 8.1.1.5 to 8.1.1.7. If you are upgrading from 8.1.1.6 to 8.1.1.7, you do not need to import 8.1.1.6 seed data.
dataimp /u user_name /p password /f <SIEBEL_TOOLS_ROOT\REPPATCH\BIP_8117FP\SEED_DATA\SEED_DATA_8116\SIA\BI P_Seed.dat /l SIEBEL_TOOLS_ROOT\TEMP\dataimp_seed.log /c data_source /d tableowner /e y /h log /w y /i SIEBEL_TOOLS_ROOT\REPPATCH\BIP_8117FP\SEED_DATA\SEED_DATA_8116\SIA\BIP_ Seed.inp dataimp /u <user_name /p password /f <SIEBEL_TOOLS_ROOT\REPPATCH\BIP_8117FP\SEED_DATA\SEED_DATA_8116\SIA\BI P_Seed_Locale_ENU.dat /l SIEBEL_TOOLS_ROOT\TEMP\dataimp_seed.log /c data_source /d tableowner /q -1 /w n /e y /t n /x R /n 100 /h log
To import 8.1.1.6 for languages other than ENU for SIA, run the following command:
dataimp /u <user_name /p password /f SIEBEL_TOOLS_ROOT\REPPATCH\BIP_8117FP\SEED_DATA\SEED_DATA_8116\SIA\BIP_ Seed_Locale_LANG.dat /l SIEBEL_TOOLS_ROOT\TEMP\dataimp_seed.log /c data_source /d tableowner /q -1 /w n /e y /t n /x R /n 100 /h log
53
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
To import 8.1.1.6 seed data for ENU for SEA, navigate to SIEBEL_TOOLS_ROOT\BIN, and run the following command:
dataimp /u user_name /p password /f SIEBEL_TOOLS_ROOT\REPPATCH\BIP_8117FP\SEED_DATA\SEED_DATA_8116\HOR\BIP _Seed.dat /l SIEBEL_TOOLS_ROOT\TEMP\dataimp_seed.log /c data_source /d tableowner /e y /h log /w y /i SIEBEL_TOOLS_ROOT\REPPATCH\BIP_8117FP\SEED_DATA\SEED_DATA_8116\HOR\BIP _Seed.inp dataimp /u user_name /p password /f SIEBEL_TOOLS_ROOT\REPPATCH\BIP_8117FP\SEED_DATA\SEED_DATA_8116\HOR\BIP _Seed_Locale_ENU.dat /l SIEBEL_TOOLS_ROOT\TEMP\dataimp_seed.log /c data_source /d tableowner /q -1 /w n /e y /t n /x R /n 100 /h log
To import 8.1.1.6 seed data for languages other than ENU for SEA, run the following command:
dataimp /u user_name /p password /f SIEBEL_TOOLS_ROOT\REPPATCH\BIP_8117FP\SEED_DATA\SEED_DATA_8116\HOR\BIP _Seed_Locale_LANG.dat /l SIEBEL_TOOLS_ROOT\TEMP\dataimp_seed.log /c c data_source /d tableowner /q -1 /w n /e y /t n /x R /n 100 /h log
To import 8.1.1.7 seed data for ENU for SIA, run the following command: NOTE: The following command is required for all users, whether they are deploying Siebel Reports for the first time or whether they are upgrading from a previous 8.1.1.x Siebel Reports version.
dataimp /u user_name /p password /f SIEBEL_TOOLS_ROOT\REPPATCH\BIP_8117FP\SEED_DATA\SEED_DATA_8117\SIA\ACR 719B_VACR719B_Seed.dat /l SIEBEL_TOOLS_ROOT\TEMP\dataimp_seed.log /c data_source /d tableowner /e y /h log /w y /i <SIEBEL_TOOLS_ROOT\REPPATCH\BIP_8117FP\SEED_DATA\SEED_DATA_8117\SIA\Se edInp_Files\database_type\ACR719B_VACR719B_Seed.inp
To import 8.1.1.7 seed data for ENU for SEA, run the following command:
dataimp /u user_name /p password /f SIEBEL_TOOLS_ROOT\REPPATCH\BIP_8117FP\SEED_DATA\SEED_DATA_8117\HOR\ACR 719B_HACR719B_Seed.dat /l SIEBEL_TOOLS_ROOT\TEMP\dataimp_seed.log /c data_source /d tableowner /e y /h log /w y /i SIEBEL_TOOLS_ROOT\REPPATCH\BIP_8117FP\SEED_DATA\SEED_DATA_8117\HOR\See dInp_Files\database_type\ACR719B_HACR719B_Seed.inp
54
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
Use the instructions in the following sections to implement ACR 731. NOTE: In Siebel Tools, lock the respective object or project prior to making changes to it. Once the changes have been made, compile the respective object to the SRF file. After successful compilation, unlock the respective objects and projects.
Preinstallation Instructions
NOTE: The iSign90.cab file, which is used in this procedure, is available from Oracle Support. For more information about how to obtain this file, contact your Oracle representative or Product Manager.
\siebel\webmaster\siebel_build\applets \siebel\eapps\public\enu\21215\applets
Deploy iSign90.cab.
7 8 9
10 Repeat Step 1 through Step 9 for the LS Pharma Txn Adjustment Signature Form Applet and LS
55
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
Expand the User Properties control, and modify the value of the CLASSID property from {EFB7D763-97A3-11CF-AE19-00608CEADE00} to clsid:93E5204A-4344-4381-89128A7091E0FAE5. Add a new property with the following values:
6 7 8 9
Modify the value of the Enabled property from TRUE to 1. Change the name of the Ink user property to Signature. Compile the applet. Repeat Step 1 through Step 8 for the Pharma Signature Display Form Applet.
6 7 8 9
Modify the value of the Enabled property from TRUE to 1 Change the name of the Ink user property to Signature. Compile the applet. Repeat Step 1 through Step 8 for Control Signature 2, Control Signature 3, Control Signature 4, Control Signature 5, and Control Signature 6.
56
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
6 7 8 9
Modify the value of the Enabled property from FALSE to 0. Change the name of the Ink user property to Signature. Compile the applet. Repeat Step 1 through Step 8 for the Sign control.
57
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
Review and implement the requirements for SAI for Oracle Fusion Middleware. For instructions, see Siebel Application Integration for Oracle Fusion Middleware Guide on Siebel Bookshelf.
Import the archive files. For instructions, see Importing Archive Files for ACR 750 on page 58.
3 4
Update the srvrdefs.dat file to configure outbound Web services. For instructions, see Updating the srvrdefs.dat File on page 60. Make sure the following Siebel Server components are enabled:
Siebel Application Object Manager, for example, Call Center Object Manager (ENU) EAI Object Manager (ENU) This server component allows for outbound Web service calls from a Siebel application and is packaged as part of the siebns.dat modification utility.
Reconfigure the Siebel Server, Enterprise Server, and the Gateway Server for outbound Web services. For information about configuring the Siebel Server, Enterprise Server, and Gateway Server, see Siebel Installation Guide for the operating system you are using. For information outbound Web services specific to SAI for Oracle Fusion Middleware, see Siebel Application Integration for Oracle Fusion Middleware Guide on the Siebel Bookshelf. NOTE: You must have completed all instructions in this document before performing this step.
After completing this process, you are ready to install SAI for Oracle Fusion Middleware. For more information about installing and using SAI for Oracle Fusion Middleware, see Siebel Application Integration for Oracle Fusion Middleware Guide on the Siebel Bookshelf.
58
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
3 4
Extract the archive files (.sif) from ACR750.zip. This ZIP file provides common archives for both Siebel Industry Applications and Siebel Cross-Industry Applications. Edit the Siebel Tools configuration file (tools.cfg) to allow for import of symbolic strings.
a b c 5 6
Navigate to the directory: SIEBEL_TOOLS_ROOT\bin\lang, where lang is the language directory specific to your deployment. Open the tools.cfg file in an editor, such as Notepad. Change the value of the SymStrPrefix parameter to SBL_, and then save the tools.cfg file.
NOTE: Not all projects are available until you import the SIF files in the next step. In this case, lock the new projects, and then reimport the appropriate SIF files again.
Using the Import from Archive(s) menu item, import the following .sif archive files you previously extracted into Siebel Tools:
CSSIOCreationService.sif DynamicIOCreationService.sif EAI JCA Service.sif EAISubsys.sif InfraNameServer.sif SAI EAI Outbound Services.sif ServerMgr_ARN _ParameterRemoved.sif ServerMgrSubsys.sif
Extract the archive (.sif) files from the appropriate ZIP file to a folder.
ACR750_BaseIO_HOR.zip. This archive file provides base integration objects for Siebel Industry Applications. ACR750_BaseIO_SIA.zip. This archive file provides base integration objects for Siebel Cross-Industry Applications.
Run the following command from the SIEBEL_TOOLS_ROOT\tools\bin directory to import the preconfigured base integration objects: NOTE: This process can take some time; wait until the process completes. siebdev.exe /c tools.cfg /d sample /u sadmin /p sadmin /batchimport "repository name" merge directory_name import.log where:
59
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
/d is the data source to use /u is the username /p is the password repository name is the repository you want to use (the default is Siebel Repository)
directory_name is the directory to which you extracted the base integration objects in Step 8
import.log writes the data to a log file in the SIEBEL_TOOLS_ROOT\tools\bin directory
11 Compile the following projects into an updated repository file (SRF), and then copy the new SRF file to the Siebel Server installation directory, under SIEBSRVR_ROOT\objects\lang:
EAI Business Services Server Components - Infrastructure Server Components - EAI SAI Outbound Services SAI Base Integration Objects
For Windows:
60
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
UpdateSrvrdefs.bat HOR for Siebel Business Applications UpdateSrvrdefs.bat SIA for Siebel Industry Applications
For Unix:
Navigate to Tools\REPPATCH\ACR762\REPOSITORY\BatchImport.bat, and update the file with your environment information. SET IMPORTTOOLSROOT=<Tools Path E.g. D:\sea78\tools> SET IMPORT_DATASOURCE=<DataSrc from Tools.cfg> SET IMPORT_USER=<DB User Name> SET IMPORT_PASSWORD=<DB Password>
3 4
Run the BatchImport batch file to import the new objects. Navigate to Tools\REPPATCH\ACR762\REPOSITORY\ImportLog\ImportSummary.txt, and verify that the import completed successfully.
SBL_LS_SGOP_PRODUCT_DETAIL
61
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
You can configure the applets, the application, and the business components manually, or you can import the SIF filesor import the sif files one by one manually. If you choose to import the sif files, please lock those projects and use the "Merge" option for import from archive.
Add a new field to the Client - Mobile business component: Column REMOTE_NODE_TYPE_C D Pre-Def Value Expr: "LookupValue(""REMOTE _NODE_TYPE"",""SIEBEL _REMOTE"")" Pick List LS SGOP Remote Client Type Picklist
Pick Map Parent Field Remote Node Type Field Remote Node Type Picklist Field Value
Fields Name Row Id Column ROW_ID Join S_CON_ADDR Force Active TRUE
Add a new list column to the Mobile Client list applet with the following values, and map the new column to the Edit List: Class CSSSWEFrameListVisibilityPick No Insert TRUE
List Columns Display Name Remote Node Type Field Remote Node Type Display Name Remote Node Type Display Name String Reference SBL_LS_SGOP_REMOTE_NODE_TYPE Pick Applet
62
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
Within the Siebel Life Sciences application, add a new screen menu item:
Screen Menu Item Screen Screen LS SGOP Modification Tracking Admin Screen Text Text Administration Modification Tracking Text String Reference Text String Reference SBL_LS_SGOP_ADMINSTRATION_MODIFICATION _TRACKING
Create an ODBC entry for the database where you plan to import the seed data:
a b c d
Navigate to Start > Settings > Control Panel > Administrative Tools > Data Sources (ODBC), navigate to the System DSN tab, and click Add. Select the "Siebel Oracle90" driver (from Datadirect Technologies). Enter a data source name (such as Siebel_DSN. Enter the server name to connect to:
For Oracle, enter the TNS service name that you created to connect Siebel Tools to the database. Test your connection and click OK when tested successfully
Navigate to the directory where you installed Siebel Tools and change the directory to REPPATCH\ACR762
63
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
Navigate to <Tools Install Directory>Root\REPPATCH\ACR762\SEED_DATA\, and update the importSeed.bat file with your environment information.
SET SGOPTOOLSPATH=<Tools Path>, such as D:\sea78\tools SET SGOPDATASRC=<DataSrc from ODBC System DSN (such as Siebel_DSN> SET SGOPTBLOWNER=<Table Owner Name> SET SGOPUSERNAME=<DB User Name> SET SGOPPASSWORD=<DB Password>
4 5 6 7
Before executing the next step, make sure that the dataimp.exe file exists in the <Tools Install Directory>/bin directory. Run the ImportSeed batch file to import the seed data. Navigate to <Tools Install Directory>\REPPATCH\ACR762\SEED_DATA\log, and check the ACR762_SEEDImp.log file to see if there were any errors during the import. Update the Object Table Mapping records
a b
Log into the Siebel application as an administrator (sadmin/sadmin). Navigate to Modification Tracking Admin Screen > Object Table Mappings view, and update the following records: Object Name LS SGOP_RelatedContact LS SGOP_RelatedAccount Table Name S_PARTY_REL S_PARTY_REL
64
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
Before importing LSSGOP_Contact.XML, run the update SQL command against the database that you are connecting to. This to update the existing OOTB Contact's Proxy Name to avoid a unique key violation error. Update S_WS_OPERATION set proxy_name = 'ContactIns' where name='ContactInsert' Update S_WS_OPERATION set proxy_name = 'ContactUpd' where name='ContactUpdate' Update S_WS_OPERATION set proxy_name = 'ContactDel' where name='ContactDelete' Update S_WS_OPERATION set proxy_name = 'ContactQP' where name='ContactQueryPage'
Before importing ModificationTrackingPurge.XML and ModificationTracking.XML, run the two SQL statements below Update S_WS_OPERATION set proxy_name = 'xx' where method_name='Delete' and proxy_name is null; Update S_WS_OPERATION set proxy_name = 'xx' where method_name='QueryPage' and proxy_name is null;
Move the DLLs from the ACR 762 > Library > Documents > Dlls to the \siebsrvr\BIN folder. NOTE: The .sscaspbc.dll and swcaspfr.dll files are specific to Siebel Life Sciences functionality, and the sssatrou.dll and sssrrec.dll files are specific to modification tracking.
65
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
/ The final sql should look like this: ;;; Find transactions to route TXN_ROUTER_SEL_NODES = select childn.ROW_ID NODE_ID, childn.NAME, dsr.LAST_TXN_NUM, childn.REMOTE_NODE_TYP_CD from &Table_Owner.S_DOCK_STATUS dsr, &Table_Owner.S_NODE childn where childn.PAR_NODE_ID = ? and childn.APP_SERVER_NAME = ? and childn.NODE_TYPE_CD = 'REMOTE' and (childn.EFF_END_DT is null or childn.EFF_END_DT >= {fn now()}) and childn.ROW_ID = dsr.NODE_ID and dsr.TYPE = 'ROUTE' and dsr.LOCAL_FLG = 'Y' and childn.ROUTE_ACTIVE_FLG = 'Y' /
66
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
2 3 4
Navigate to Site Map> Administration - Application > System Preference view, add a new System Preference record called Enable Modification Tracking, and set the value to TRUE. Navigate to Site Map >Administration - Server Configuration > Synchronize, and click the Synchronize button. Navigate to Administration - Siebel Remote, and create a new mobile client entry with the following values: NOTE: If an entry already exists, delete it and recreate the record to set App Server Name as the current server.
Mobile Client - SPORTER Uid - SPORTER Routing Model - MOBILE CLIENT - STANDARD Language - ENU Remote Node Type - Offline Client
Navigate to Administration - Server Management > Jobs, and create a new job with the following parameters (one time per server) to create a new database template in the Siebel\dbtempl folder:
Wait until the new job completes, and repeat Step 5 for each remote client to complete remote client setup.
LOY Admin
67
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
NOTE: All the repository objects are located within the ACR802\REPOSITORY folder inside the extracted ACR802.zip folder. The ACR802 Repository Objects.xls file lists all of the objects that were added or modified in ACR 802. These sif files are located in the corresponding folders, as shown in Table 41 on page 68.
Table 41. S. No 1 2 3 4 5 6 7 8 9 10 11
Repository Objects for ACR 802 Repository Type Applet Busienss Component Business Object Business Service Picklist View Class Workflow Symbolic String Integration Object Link SIF File Name Applet \ Applets.sif Business Component \ BusinessComponents.sif Business Object \ BusinessObjects.sif Business Service \ BusinessServices.sif Picklist \ PickLists.sif View \ Views.sif Class \ Classes.sif Workflow \ WorkFlows.sif Symbolic String \ SymbolicStrings.sif Integration Object\IntegrationObjects.sif Links\Links.sif
68
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
Within the Apply Schema dialog box, provide details for the following fields.
a b c d 5 6
Within the Tables drop-down list, select Current Query. Within the Database user field, enter the database user name. Within the Database user password field, enter the database user password. Within the ODBC data source field, enter the ODBC name.
After filling out the fields in the Apply Schema dialog, click Apply. Within the confirmation dialog box, click OK. Use the following procedure to compile the repository objects into the SRF.
69
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
2 3 4
Create a folder called named Log in <Unziplocation>\REPOSITORY. Run the import.bat file to import the .sif files, and check the log file to verify that all of the files imported successfully. Apply the schema changes for the S_SITE_VST_LOG and EIM_ST_VST_LOG tables. For more information, see Performing Schema Changes for ACR 839 on page 71.
70
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
5 6
Import the workflow processes into Siebel repository. For more information, see Importing Workflow Definitions for ACR 839 on page 76. In Siebel Tools, compile all of the locked and updated projects. CAUTION: It is recommended that you delete the import.bat file after the installation is complete, because the file contains sensitive information.
NOTE: If you want to configure ACR 839 manually, use the instructions in Performing Schema Changes for ACR 839 on page 71 through Configuring Integration Objects for ACR 839 on page 75 . If you are using the automated functionality to configure ACR 839, you do not need to perform the procedures in these sections. Instead, perform the procedures described in Importing Workflow Definitions for ACR 839 on page 76 through Configuring Web Services for ACR 839 on page 78. manually.
Use the Tools - Import from Archive function within Siebel Tools to read this file and create the tables in the repository. Use the Merge option to import this file. NOTE: You only need to import the tables if you are configuring ACR 839 manually. If you have imported the sif files, you do not need to perform this procedure. Use the following procedure to create the S_SITE_VST_LOG and EIM_ST_VST_LOG tables on the physical database.
To create the S_SITE_VST LOG and EIM_ST_VST_LOG tables on the physical database 1 2 3
Within Siebel Tools, query for the list of tables that were imported into the repository. Click the Apply/DDL button to apply the changes to the physical database. Provide the Table Owner details in the username and password fields and the ODBC name in the ODBC data source field.
71
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
LS Clinical Site Visit Location Business Component (New) Navigate to <Unziplocation>\REPOSITORY\Business Component\LS Clinical Site Visit Location.sif, and import the file using the Import from Archive function within Siebel Tools.
LS Clinical Site Visit Employee Business Component (New) Navigate to <Unziplocation>\REPOSITORY\Business Component\LS Clinical Site Visit Employee.sif, and import the file using the Import from Archive function within Siebel Tools.
Clinical Protocol Site for Mobile Integration Business Component (New) Navigate to <Unziplocation>\REPOSITORY\Business Component\Clinical Protocol Site for Mobile Integration.sif, and import the file using the Import from Archive function within Siebel Tools.
Add the following Joins and Join Specifications fields described in Table 42 and Table 43:
Joins and Join Specifications Fields for ACR 839 (Continued in Table 43) Column FORMAT_TYPE_CD EMP_ID LOGIN Join S_EVT_MAIL S_ACT_EMP S_USER Immediate Post Changes No Copy
Table 43.
Joins and Join Specifications for ACR 839 (Continued from Table 42) Picklist Type DTYPE_TEXT DTYPE_ID DTYPE_TEXT Required Calculated Predefault Value
72
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
Add a join specification with the values in the following table: Name Visit Employee Emp Login Destination Column ACTIVITY_ID ROW_ID Source Field Id Emp Id
Clinical Trip Report Business Component User Properties New/Changed Changed (Deep Delete changed to Deep Delete 1) New Name Deep Delete 1 Deep Delete 2 Value Activity Plan LS Clinical Site Visit Location
Navigate to the <Unziplocation>\REPOSITORY\ Link\Clinical Trip Report folder, and import the following .sif files using the Import from Archive function within Siebel Tools:
Navigate to <Unziplocation>\REPOSITORY\Link\Clinical Protocol Site for Mobile Integration folder, and import the following files using the Import from Archive function within Siebel Tools:
Clinical Trip Report.sif Clinical Protocol Site Address BC.sif Clinical Account Investigator Role.sif
Clinical Protocol Site for Mobile Integration.sif LS Clinical Site Visits Geo Location.sif
73
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
Business Component LS Clinical Site Visit Location LS Clinical Site Visit Employee
Clinical Site Visit Location List Applet (New) Navigate to <Unziplocation>\REPOSITORY\Applet\ LS Clinical Site Visit Location List Applet.sif, and import the file using the Import from Archive function within Siebel Tools.
1 2
Navigate to <Unziplocation>\REPOSITORY\View\LS Clinical Trip Report Detail View with Geo Location.sif, and import the file using the Import from Archive function within Siebel Tools. Navigate to <Unziplocation>\REPOSITORY\View\LS Clinical Trip Report Detail View with Geo Location Without CRF.sif, and import the file using the Import from Archive function within Siebel Tools.
74
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
1 2
In OBLE, navigate to the Screen object. Query for the Clinical Site Management screen and add the LS Clinical Trip Report Detail View with Geo Location and LS Clinical Trip Report Detail View with Geo Location Without CRF views as shown in the following table: Viewbar Text on Screen View Geo Location Details Geo Location Details
Screen Views Clinical Trip Report Detail View with Geo Location Clinical Trip Report Detail View with Geo Location Without CRF
Right-click on Screen, select edit Screen View Sequence, and verify that the views are added after the last view under the "Clinical Trip Report Detail View" and "Clinical Trip Report Detail View without CRF" categories, respectively.
1 2
Lock the LS Clinical Protocol Site project. Navigate to <Unziplocation>\REPOSITORY\Integration Object folder, and import the following .sif files using the Import from Archive function within Siebel Tools: LS Clinical Protocol Site_Site Visits Input IO.sif LS Clinical Protocol Site_Site Visits Intermediate IO.sif LS Clinical Protocol Site_Site Visits Output IO.sif LS Clinical Site Visits Geo Loc IO.sif LS Clinical Site Visits Geo Loc Intermediate IO.sif Compile the locked projects.
75
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
2 3 4
From Object Explorer, navigate to Workflow Process, and from the list applet, right-click and choose Import Workflow Process. Navigate to <Unziplocation>\REPOSITORY\Workflows, and select SWI LS Clinical Query Protocol Site_Site Visits.xml. Navigate to <Unziplocation>\REPOSITORY\Workflows, and select SWI LS Clinical Create Site Visit Geo Location.xml. Xml File to Import SWI LS Clinical Query Protocol Site_Site Visits.xml SWI LS Clinical Create Site Visit Geo Location.xml Workflow Name SWI LS Clinical Query Protocol Site_Site Visits SWI LS Clinical Create Site Visit Geo Location Project LS Clinical Protocol Site LS Clinical Protocol Site
New/Modified New
New
5 6
After import, query for the workflows, and in Lock Projects view > Workflow process, focus on the records, and click the Publish button on top of the applet to deploy the workflows. Repeat the preceding steps for the remaining new workflows.
SWI LS Clinical Query Protocol Site_Site Visits SWI LS Clinical Create Site Visit Geo Location
76
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Configuration Instructions for Enhancements and Updates
For information about how to enable component groups, see topic about enabling Siebel Server component groups for safety system integration in the Siebel Life Sciences Guide on the Siebel Bookshelf.
a b c d e 2
Navigate to Start > Settings > Control Panel > Administrative Tools > Data Sources (ODBC), click the System DSN tab, and click Add. Select the "Siebel Oracle90" driver (from Datadirect Technologies). Enter a data source name (such as DevelopmentDB). Enter the server name to connect to.
For Oracle enter the TNS service name that you created to connect your tools to the DB.
Navigate to the directory where you installed Siebel Tools. NOTE: Before executing the next step, make sure that the dataimp.exe file exists in the <Tools Install Directory>/bin directory.
Rename <Unziplocation>\SEED_DATA\Import_Seed_Data.txt to import_Seed_Data.bat, edit the file, and change the first six parameters related to the application database and Tools Path details. Create a temp directory under <Tools Install Directory> to save the log file. For example: SET ACR839TOOLSPATH=D:\Siebel_8113_Release\Tools_8115_21229 SET DBFOLDER=D:\Siebel_8113_Release\Tools_8115_21229\Seed\ORACLE SET ACR839DATASRC=emsqa1b SET ACR839TBLOWNER=EMSORA01225 SET ACR839USERNAME=SADMIN SET ACR839PASSWORD=SADMIN
77
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Siebel Fix Pack Installation Instructions
Review the <Tools Install Directory>\temp\dataimp_seed.log file to make sure that the import completed successfully CAUTION: It is recommended that you delete the import.bat file after the installation is complete, because the file contains sensitive information.
78
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Siebel Fix Pack Installation Instructions
79
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Siebel Fix Pack Installation Instructions
80
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Siebel Fix Pack Installation Instructions
Installing any Fix Pack requires an existing installation of a qualified base release to install into. Here, base release means the current version of the existing installation, including version 8.1.1 software and optionally including any installed Siebel Fix Pack 8.1.1.x or other patch releases. Valid base releases are Siebel Industry Applications, version 8.1.1 or version 8.1.1.x. NOTE: In order to run Siebel Business Applications software, all components of a Siebel Enterprise must be at the same exact version 8.1.1.x release level.
81
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Siebel Fix Pack Installation Instructions
As an alternative to installing 8.0 and 8.0.0.x separately, you can combine 8.0 and 8.0.0.x installation (for server-based modules) as described in Configuring Slipstream Patch Installation on page 93. For more information about stopping and restarting Siebel components, which is a required part of the Fix Pack installation process, see Siebel System Administration Guide. See also Siebel Installation Guide for the operating system you are using. These guides are available on the latest version 8.1 Siebel Bookshelf. See also Postinstallation Tasks for the Web Server on page 95. After you install version 8.1.1 and version 8.1.1.x, you can also install any applicable Quick Fix release on top of version 8.1.1.x. For more information, see About Installing Siebel Quick Fix Releases on page 83.
Related Topics Installing the Siebel Fix Pack on Microsoft Windows on page 83 Installing the Siebel Fix Pack on UNIX on page 88 Uninstalling Siebel Fix Packs on page 97
After adding a language to your installed software, you must add the language to the Siebel Database, import Siebel Repository data into the database for this language, and run the MLOV (multilingual LOV) conversion utility. It is recommended to perform database-related tasks after installing applicable Fix Packs or other patch releases. NOTE: If you are adding languages to an existing installation, do so before you install the latest Siebel Fix Pack 8.1.1.x release. It is possible to add a language after a Fix Pack has been installed. However, for each component for which you add a language, you must reinstall the Fix Pack to bring the language pack files up to the current release level. (Because Fix Packs are cumulative, you can install just the latest Siebel Fix Pack 8.1.1.x release, even if you previously installed a prior Fix Pack before adding the language.)
82
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Siebel Fix Pack Installation Instructions
If you are not adding languages, you only need to install the latest Siebel Fix Pack 8.1.1.x release, as described in this guide. For detailed information about installing and deploying Siebel languages, see also: Siebel Installation Guide for the operating system you are using Siebel Global Deployment Guide Configuring Siebel Business Applications Siebel System Requirements and Supported Platforms on Oracle Technology Network
See also Postinstallation Tasks for Supporting Additional Languages on page 96.
Related Topics
83
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Siebel Fix Pack Installation Instructions
This topic has the following subtopics: Installing the Fix Pack for Siebel Enterprise Server on Windows on page 84 Installing the Fix Pack for Siebel Web Server Extension on Windows on page 85 Installing the Fix Pack for Siebel Management Agent and Siebel Management Server on Windows on page 85 Installing the Fix Pack for Siebel Mobile Web Client, Siebel Tools, or Siebel Client Sync on Windows on page 87
2 3
Siebel_Image is the directory for your version-specific Siebel installation image, such as C:\Siebel_Install_Image\8.1.1.x.
4 5 6 7 8
Double-click setup.exe to start the Siebel Enterprise Server installer for version 8.1.1.x. Select an instance of version 8.1.1 or 8.1.1.x to patch, from the list of detected Siebel installations. Follow all prompts to complete installation of version 8.1.1.x. Repeat these steps on each computer with a Siebel Enterprise Server component installation to be patched. Restart all applicable Siebel Business Applications product components at the end of all Fix Pack or other patch release installation for server-based products.
84
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Siebel Fix Pack Installation Instructions
Installing the Fix Pack for Siebel Web Server Extension on Windows
This topic is part of Installing the Siebel Fix Pack on Microsoft Windows on page 83. Use the instructions that follow for installing Siebel Fix Pack 8.1.1.x on any computer where Siebel Web Server Extension (SWSE) is installed. NOTE: Before you install any Fix Pack release for SWSE, refer to Siebel System Requirements and Supported Platforms on Oracle Technology Network to verify that the Web server version is correct for the Siebel Business Applications release. If you need to update the Web server, do so before you install the Fix Pack for SWSE.
Siebel_Image is the directory for your version-specific Siebel installation image, such as C:\Siebel_Install_Image\8.1.1.x.
3 4 5 6 7
Double-click setup.exe to start the SWSE installer for version 8.1.1.x. Select an instance of version 8.1.1 or 8.1.1.x to patch, from the list of detected Siebel installations. Follow all prompts to complete installation of version 8.1.1.x. Repeat these steps on each computer with an SWSE installation to be patched. Restart the Web server at the end of all Fix Pack or other patch release installation for serverbased products. For more information, see Postinstallation Tasks for the Web Server on page 95.
Installing the Fix Pack for Siebel Management Agent and Siebel Management Server on Windows
This topic is part of Installing the Siebel Fix Pack on Microsoft Windows on page 83. Use the instructions that follow for installing Siebel Fix Pack 8.1.1.x on computers where Siebel Management Agent or Siebel Management Server are installed. NOTE: These instructions for installing Siebel Management Agent assume that Management Agent was installed separately. If your instances of Management Agent were installed automatically as part of Siebel Server installation, follow the instructions in Installing the Fix Pack for Siebel Enterprise Server on Windows on page 84 instead. See also the Siebel Installation Guide for the operating system you are using.
85
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Siebel Fix Pack Installation Instructions
When you install a Fix Pack for an instance of Siebel Management Agent, the Siebel Management Server will be unable to connect to it. It is not necessary to shut down the Management Server while you install the Fix Pack for the Management Agents. After you install the Fix Pack for all instances of Management Agent, shut down the Siebel Management Server, then install the Fix Pack for Management Server. After you restart Management Server, it automatically reconnects to each instance of Management Agent. Newly patched instances of Management Agent will not be operational until Management Server has also been patched.
To install the Fix Pack for Siebel Management Agent (where Management Agent was installed separately) 1 2
Stop the Siebel Management Agent service. In Windows Explorer, navigate to the Siebel image location for version 8.1.1.x, then to the directory where the installer is located. For Siebel Management Agent, navigate to Siebel_Image\Windows\Server\Siebel_Management_Agent, where:
Siebel_Image is the directory for your version-specific Siebel installation image, such as C:\Siebel_Install_Image\8.1.1.x.
3 4 5 6 7
Double-click setup.exe to start the Siebel Management Agent installer for version 8.1.1.x. Select an instance of version 8.1.1 or 8.1.1.x to patch, from the list of detected Siebel installations. Follow all prompts to complete installation of version 8.1.1.x. Restart the Management Agent service. Repeat these steps on each computer with a Siebel Management Agent installation to be patched (where Management Agent was installed separately).
Siebel_Image is the directory for your version-specific Siebel installation image, such as C:\Siebel_Install_Image\8.1.1.x.
3 4 5 6 7
Double-click setup.exe to start the Siebel Management Server installer for version 8.1.1.x. Select an instance of version 8.1.1 or 8.1.1.x to patch, from the list of detected Siebel installations. Follow all prompts to complete installation of version 8.1.1.x. Restart the Management Server service. Repeat these steps on each computer with a Siebel Management Server installation to be patched. (In most deployments, only one instance is installed.)
86
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Siebel Fix Pack Installation Instructions
Installing the Fix Pack for Siebel Mobile Web Client, Siebel Tools, or Siebel Client Sync on Windows
This topic is part of Installing the Siebel Fix Pack on Microsoft Windows on page 83. Use the instructions that follow for installing Siebel Fix Pack 8.1.1.x on computers where Siebel Mobile Web Client, Siebel Tools, or Siebel Client Sync are installed. (Most of the information for Siebel Mobile Web Client also applies to Siebel Developer Web Client.) NOTE: As of version 8.1.1, the installer programs for Siebel Mobile Web Client and Siebel Tools are based on the Oracle Universal Installer (OUI) framework, and have many differences from installers for previous releases. For a detailed summary of installer changes, see the Siebel Installation Guide for the operating system you are using.
To install the Fix Pack for Siebel Mobile Web Client or Siebel Tools 1
Exit any Siebel software on the client computer where you are installing the Fix Pack. NOTE: For a Siebel Mobile Web Client using the Siebel QuickStart feature, you must also exit the QuickStart agent, if it is running. To do this, right-click the QuickStart icon in the system tray, then choose Exit. For more information about using Siebel QuickStart with the Mobile Web Client, see the Siebel Installation Guide for the operating system you are using.
In Windows Explorer, navigate to the Siebel image location for version 8.1.1.x, then to the directory where the installer is located. For example:
For Siebel Mobile Web Client, navigate to Siebel_Image\Windows\Client\Siebel_Web_Client\Disk1\install For Siebel Tools, navigate to Siebel_Image\Windows\Client\Siebel_Tools\Disk1\install
where:
Siebel_Image is the directory for your version-specific Siebel installation image, such as C:\Siebel_Install_Image\8.1.1.x.
3 4 5 6
Double-click oui.exe to start the Siebel client or Siebel Tools installer for version 8.1.1.x. In the dialog box labeled Specify Home Details, select an instance of version 8.1.1 or 8.1.1.x to patch, from the list of detected Siebel installations. Follow all prompts to complete installation of version 8.1.1.x. Repeat these steps on each computer with an applicable Siebel client or Siebel Tools installation to be patched. NOTE: The computer might require a restart at the end of the installation.
87
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Siebel Fix Pack Installation Instructions
Siebel_Image is the directory for your version-specific Siebel installation image, such as C:\Siebel_Install_Image\8.1.1.x.
3 4 5 6
Double-click install.exe to start the Siebel Client Sync client installer for version 8.1.1.x. Select an instance of version 8.1.1 or 8.1.1.x to patch, from the list of detected Siebel installations. Follow all prompts to complete installation of version 8.1.1.x. Repeat these steps on each computer with an applicable Siebel Client Sync installation to be patched. NOTE: The computer might require a restart at the end of the installation.
88
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Siebel Fix Pack Installation Instructions
2 3
4 5
Open a new shell and navigate to the Siebel image location for version 8.1.1.x, then to the directory where the installer is located. For Siebel Enterprise Server, navigate to Siebel_Image/ UNIX_OS/Server/Siebel_Enterprise_Server, where:
Siebel_Image is the directory for your version-specific Siebel installation image, such as /Siebel_Install_Image/8.1.1.x. UNIX_OS is your UNIX operating system, such as AIX, HPUX (HP-UX), Linux, or Solaris.
(For GUI mode) Run setupUNIX_OS to start the Siebel Enterprise Server installer in GUI mode for version 8.1.1.x, where:
UNIX_OS is your UNIX operating system, such as aix (AIX), hp (HP-UX), linux (Linux), or sol (Solaris).
(For console mode) Enter the following command to start the Siebel Enterprise Server installer in console mode for version 8.1.1.x: setupUNIX_OS is:javaconsole -console
89
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Siebel Fix Pack Installation Instructions
where:
UNIX_OS is your UNIX operating system, such as aix (AIX), hp (HP-UX), linux (Linux), or sol (Solaris).
10 Select an instance of version 8.1.1 or 8.1.1.x to patch, from the list of detected Siebel
installations.
11 Follow all prompts to complete installation of version 8.1.1.x. 12 Repeat these steps on each computer with a Siebel Enterprise Server component installation to
be patched.
13 Restart all applicable Siebel Business Applications product components at the end of all Fix Pack
or other patch release installation for server-based products.
Installing the Fix Pack for Siebel Web Server Extension on UNIX
This topic is part of Installing the Siebel Fix Pack on UNIX on page 88. Use the instructions that follow for installing Siebel Fix Pack 8.1.1.x on any computer where Siebel Web Server Extension (SWSE) is installed. NOTE: Before you install any Fix Pack for SWSE, refer to Siebel System Requirements and Supported Platforms on Oracle Technology Network to verify that the Web server version is correct for the Siebel Business Applications release. If you need to update the Web server, do so before you install the Fix Pack for SWSE.
ompmnctl stopall - for Oracle HTTP Server (on AIX or supported Linux platforms) stopapa for other Apache-based Web servers (on AIX, HP-UX, or supported Linux platforms) stop for Oracle iPlanet Web Server (on Oracle Solaris)
2 3
Log on to the server using the Web server owner account. (AIX only) Verify that the login ID performing the installation has permission to run slibclean by asking the administrator to change the permission as follows: chmod 6555 /usr/sbin/slibclean
Open a new shell and navigate to the Siebel image location for version 8.1.1.x, then to the directory where the installer is located. For SWSE, navigate to Siebel_Image/UNIX_OS/Server/ Siebel_Web_Server_Extension, where:
Siebel_Image is the directory for your version-specific Siebel installation image, such as /Siebel_Install_Image/8.1.1.x. UNIX_OS is your UNIX operating system, such as AIX, HPUX (HP-UX), Linux, or Solaris.
90
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Siebel Fix Pack Installation Instructions
(For GUI mode) Run setupUNIX_OS to start the SWSE installer in GUI mode for version 8.1.1.x, where:
UNIX_OS is your UNIX operating system, such as aix (AIX), hp (HP-UX), linux (Linux), or sol (Solaris).
(For console mode) Enter the following command to start the SWSE installer in console mode for version 8.1.1.x: setupUNIX_OS is:javaconsole -console where:
UNIX_OS is your UNIX operating system, such as aix (AIX), hp (HP-UX), linux (Linux), or sol (Solaris).
8 9
Select an instance of version 8.1.1 or 8.1.1.x to patch, from the list of detected Siebel installations. Follow all prompts to complete installation of version 8.1.1.x.
10 Repeat these steps on each computer with an SWSE installation to be patched. 11 Restart the Web server at the end of all Fix Pack or other patch release installation for serverbased products. For more information, see Postinstallation Tasks for the Web Server on page 95.
91
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Siebel Fix Pack Installation Instructions
To install the Fix Pack for Siebel Management Agent (where Management Agent was installed separately) 1 2
Stop the service for the Siebel Management Agent. (AIX only) Verify that the login ID performing the installation has permission to run slibclean by asking the administrator to change the permission as follows: chmod 6555 /usr/sbin/slibclean
Open a new shell and navigate to the Siebel image location for version 8.1.1.x, then to the directory where the installer is located. For Siebel Management Agent, navigate to Siebel_Image/UNIX_OS/Server/Siebel_Management_Agent, where:
Siebel_Image is the directory for your version-specific Siebel installation image, such as /Siebel_Install_Image/8.1.1.x. UNIX_OS is your UNIX operating system, such as AIX, HPUX (HP-UX), Linux, or Solaris.
(For GUI mode) Run setupUNIX_OS to start the Siebel Management Agent installer in GUI mode for version 8.1.1.x, where:
UNIX_OS is your UNIX operating system, such as aix (AIX), hp (HP-UX), linux (Linux), or sol (Solaris).
(For console mode) Enter the following command to start the Siebel Management Agent installer in console mode for version 8.1.1.x: setupUNIX_OS is:javaconsole -console where:
UNIX_OS is your UNIX operating system, such as aix (AIX), hp (HP-UX), linux (Linux), or sol (Solaris).
7 8 9
Select an instance of version 8.1.1 or 8.1.1.x to patch, from the list of detected Siebel installations. Follow all prompts to complete installation of version 8.1.1.x. Restart the Management Agent service. (where Management Agent was installed separately).
10 Repeat these steps on each computer with a Siebel Management Agent installation to be patched
92
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Siebel Fix Pack Installation Instructions
NOTE: If you are adding languages to an existing version 8.1.1 or 8.1.1.x installation, slipstream installation does not apply for the installation session for installing the languages. However, slipstream installation can be used when subsequently installing Siebel Fix Pack 8.1.1.x and Quick Fix releases. For more information about installing languages, see About Installing Additional Languages on page 82. You configure slipstream patch installation by modifying the base siebel.ini files for each applicable Siebel module in the version 8.1.1 or version 8.1.1.x installation image, according to your installation scenario. The siebel.ini files are also modified in installation scenarios described in the chapter about unattended and console mode installations, in the Siebel Installation Guide for the operating system you are using. To support slipstream patch installation, where a version 8.1.1 full installation automatically invokes a Siebel Fix Pack 8.1.1.x installation, modify the siebel.ini file for each applicable product for version 8.1.1, as follows. Examples for setting Execute for different modules follow. [Slipstream] Install1 = yes [Install1] Execute = full_path_to_Siebel_product_installer_executable Arg = argument
93
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Siebel Fix Pack Installation Instructions
where: full_path_to_Siebel_product_installer_executable is the full path to the installer executable program, located in the installation image for the release that will be installed using slipstream patch installation. argument is the following value for the parameter Arg, for a server installation: Arg = -args PatchInstance=$(SiebelRoot) Slipstream=yes
94
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Siebel Fix Pack Installation Instructions
This folder and other folders are created on the first SWSE request after you install any Siebel Business Applications release. This folder is populated with static files copied from the Siebel Server directory SIEBSRVR_ROOT/webmaster/siebel_build. The contents of these folders are refreshed each time the Web server restarts, or when an administrator enters a Web update command in the browser. After a build-specific folder is created on the SWSE, folders representing earlier builds are no longer used. For more information, see the Siebel Installation Guide for the operating system you are using and Siebel Security Guide, both on Siebel Bookshelf. Failure to restart the Web server after installing the Fix Pack for Siebel Enterprise Server components and for the SWSE means the folders will not be created on the Web server, which causes the Siebel login screens to stop responding.
95
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Siebel Fix Pack Installation Instructions
After a new Siebel software version is installed, it is also recommended that users clear their browser cache. To do this in Internet Explorer, choose Tools, then Internet Options, and then choose Delete Files from the General tab. For the minimum supported version of the Java Runtime Environment (JRE), see Siebel System Requirements and Supported Platforms on Oracle Technology Network. The JRE can be downloaded automatically to your computers. As described in 475457.1 (Article ID) on My Oracle Support, some configuration might be required in order to download the correct version.
96
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Siebel Fix Pack Installation Instructions
Select a source language and a target language. The source language is the language of the locale-specific data in the LMU file you are importing. The target language is the Siebel language into which the strings will be imported.
3 4
Click the Import tab. Enter the name of the LMU file from which you want to import locale-specific attributes. You can also use the Browse button to find and select the file.
Specify whether you want to mark records in the repository with the Redo flag that have changed since the export occurred. When the import occurs, the LMU compares the source language records in the repository with the source language records in the import file. If the records in the repository have changed since the export occurred, they are marked with the Redo flag. This flag helps you identify records that might need to be retranslated.
6 7
Click Import. After finishing, recompile the SRF file and restart the Application Object Manager component on the Siebel Server to see the results.
97
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Siebel Fix Pack Installation Instructions
CAUTION: If you revert to the version 8.1.1 base installation, change request fixes and new functionality added in any or all Siebel Fix Pack 8.1.1.x releases are no longer available, until an applicable Fix Pack has been installed. You will also need to take steps described later in this topic, under guidelines and limitations.
product is one of the following values: ses (for Siebel Enterprise Server components) or eappweb (for SWSE)
98
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests
optional_arguments is one or more valid arguments for the uninstaller. For example, specify -is:javaconsole -console to run in console mode.
99
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
This section contains the following topics: Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack on page 100
Issue Addressed
10589378
10587003
APIs
12800345 12826991
10583881
Rule Behavior
100
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID 12420803 Base Bug ID Subcomponent Runtime Special Instructions
Issue Addressed ACR 502: The Quick Edit web template is not packaged with the installation files ACR 471: The UMF message is not reflected properly and promotions are not selected Child products that have been defaulted by min cardinality do not have NULL in the CFG_STATE_CD column The NoSave property does not work Within Product Configurator, when users enter an attribute value with the LineItemICField property and click Done, they receive the SBL-BPR-00162 and SBL-EAI-04381 error messages When users create product constraints in the Admin Product view, the application crashes When pick applets are used to populate attributes, Dynamic Hide functionality does not work When users exit eConfigurator within the Financial Services application, the focus is lost The cell height of the Required Attributes label is not the same as the cell height of the Optional Attributes label
12847176
12560619
Runtime
12399998
12397774
Runtime
12751510 12398737
10601639
12806588
11717572
User Interface
12809668
User Interface
12914220
User Interface
12415574
User Interface
Order Administration
Agreement Approval functionality uses the wrong email template 12750196 Quote/Order Validation
Pricing Mgmt
10 1
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID 12723829 Base Bug ID Subcomponent Price List Special Instructions
Issue Addressed The price is displayed incorrectly within the NRC field within line items
Product Administration
Action Code updates are not supported when editing simple products with attributes The RCOIS GetAttribute method returns attribute values that have not been translated into the display value for an enumerated attribute definition 10592171 10591152 Product Attributes
10595715
10594080
Product Attributes
Product Promotions
Order line items are not created properly when they are created using Favorites functionality ACR 471: The Default Attribute Creation feature does not work for remote configurator When the Apply Promotion method is used within the Headless Configuration business service, an incorrect output product structure is created if the input product structure contains any nonroot products Allows users to disable a full table scan on the S_ASSET table IntegrityCheck does not pick up migrated assets Negative price overrides within the Edit Promotion applets are totalled incorrectly 10588017 10587582 Administration
10597624
10595493
Administration
12852048
API.
13043868
Runtime.
12996503 12902863
Runtime. Runtime.
PSP Engine
102 Siebel Maintenance Release Guide Version 8.1.1.7, Rev. A
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID 12857820 Base Bug ID 10585340 Subcomponent PSP Procedures Special Instructions
Issue Addressed In version 8.1.1.5, within Siebel Pricer, the Internal Integration functionality does not work properly When users add a product to a quote, they receive the SBLBPR-00158, SBL-BPR-00162, or SBL-PSP-00831 error messages
12937371
12723829
PSP Transforms
12794483
10605987
12914620
12914658
Orders
10571055
10569588
Pricing
10 3
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID 13065192 Base Bug ID 10603335 Subcomponent Batch Deduplication Special Instructions
Issue Addressed When a record (such as an account, an address, or a contact) has an apostrophe or a special character, the application does not recognize the special character, and records error out when a batch is processed The Data Quality real time deduplication functionality fails and displays an error ACR 761: Provides a Data Quality sync switch When an account, address, or contact record contain a special character, the SBLDAT-60236 error message appears Previously-created records are not visible in the Duplicates view
12324343
Data Quality
11938030
Universal Connector
12659425
11769292
Activities
11788501
Activities
Field Service
Using the browsers Back Button causes inefficient queries against S_EVT_ACT 10554464 10541485 Dispatch Board
104
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID 10571883 10601195 Base Bug ID 10571435 10600250 Subcomponent Dispatch Board Dispatch Board Special Instructions
Issue Addressed A memory leak occurs on the Dispatch Board When users access the Dispatch board, the application hangs Within the FS Holiday API Service business service, the GetElapsedBusinessTime method yields incorrect results When users input incorrect data in the shipped line for a product, and then delete the data, an error message occurs and the transaction is not committed to the database
10606526
10599378
Home Page
10585770
10582454
Shipping
11795432 12411534
10602136 10592042
Handheld Sync
Duplicate transactions and data corruption occur Translation problems occur when strings contain words that are glued together (such as PatchAgent) 10592695 12857245 10591333 Direct Server Sync Patch Deployment
10 5
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID 10596115 Base Bug ID 10595588 Subcomponent Patch Deployment Special Instructions
Issue Addressed Makes sure that other Siebel .exe files are closed when PatchAgent needs to be started manually
Mktg/Email Marketing
When users save an offer template multiple times, the trackable URL stops working 12604183 Email Editor
12887912
CTI
106
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID 12937764 Base Bug ID Subcomponent Custom Drivers Special Instructions
Issue Addressed Siebel Agent web sessions time out when an agent is on a phone call or is chatting There is no configuration option for logging out of orphaned sessions
10592992
10571641
Server Configuration
Email
When an email has extra characters in the "ContentType: application/octetstream; name=" section, inbound emails arrive over and over every five minutes With E-mail Response, unable to get proper substituion fields when using F9 When users select a list of accounts in the Account applet and press F9, if one of the accounts does not have any contacts, only the first account that the users selected appears, and the rest of the accounts are not populated in the email form 12530877 Email
10596275
10591050
12828709
Send Email
eMail Response
Emails are rejected as Incomplete Header Line 10582649 10579692 Mail Server
10 7
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID Base Bug ID Subcomponent Special Instructions
Issue Addressed
10569529
10567133
Partner Admin
10598235
10551381
Forecasts
Forecast Summary is not refreshed when Update Detail with Revenue Item is used 10592919 10588932 Forecasts
108
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID Base Bug ID Subcomponent Special Instructions
Issue Addressed
10596898
10592900
Indexing
13019417
Results UI
10582433
10582367
Saved Searches
Siebel Search
With the implementation of the German umlauts character content search, blank dates occur when Fetch LanguageSpecific Docs is selected in Search preferences When users click on search results, changes that they have made are not saved Search crashes when users navigate to the All Accounts Across Organization view 13252298 Results UI
12536584
11668672
Search Center
12795298
Search Center
Smart Answer
Provides Microsoft Windows 2008 R2 support for Smart Answer 13023227 11767223 Smart Answer
10 9
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID Base Bug ID Subcomponent Special Instructions
Issue Addressed
10597748
13086583
Other
Service Requests
When users drill down on a newly-created service request, the application crashes 13090158 10589090 Related SRs
SmartScript
SmartScript questions associated to an MVF field do not refresh correctly when users press the Enter key 10581920 10506510 SmartScript
110
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID 10598582 Base Bug ID 10597734 Subcomponent Territory Management Special Instructions
Issue Addressed Users are unable to add multiple conditions in a Territory Alignment created by another user
10566294 12998690
10566293 12901373
Other Other
12982010
12887716
Other
Siebel Charts
Charts
When users click twice on the Go button within the Chart applet, a blank chart displays 10588465 10585178 Chart Engine
11 1
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID 13081720 Base Bug ID Subcomponent AIA Special Instructions
Issue Addressed When users create an asset for an account with Billing Profile/ Service Id information, navigate to the Account screen, modify the Billing Profile/Service Id information, and submit the order, ListOfSWIOrderItemPreviousV alues" section is blank
12742166
Promotions
A couple of member variable business components are not initialized to NULL in the CSSAccntPlanSvc class, so destructor releases them In Admin Data > Account Product > Price List, when users click the Update Price/ Cost button, too many records appear, and performance suffers 13068408
13069081
Retail Execution
For targeted pharma accounts, within the Objectives view, when users click the Apply button, calls are not generated for the target account 13069220
112
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID 13068452 Base Bug ID Subcomponent Special Instructions
12959596
11738656
JMS
MQ
Allows the Siebel application to receive an inbound message from MQ, process it, and provide a message response with a value for the MQMD_R_Out_CorrelId header, so that the value from MQMD_R_Out_CorrelId can be set as the next outbound message to MQ as the MQMD_S_In_CorrelId to match up the requests 12622626 MQ
12629343
Other
11 3
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID 10603642 Base Bug ID 10591549 Subcomponent Other Special Instructions
Issue Addressed The EAI Siebel Adpater/EAI UI Data Adapter ignores PDQ Sort Spec
Java Integration
Business service migration fails for the QueryBid method Modified XSDS do not work with REST because Clear Cache is not called There is no automation script for outbound configurationN A deadlock occurs while deleting RA+MDB on WLS There is no option to set the log level for outbound JMS logs Not needed Deployment fails for REST designed with XSD The log location mentioned in EJB-JAR.xml is misleading When the proxy method is the template like method (A arg1, B arg2, A arg3), the wrapper fails to compile ACR 543: Integration objects listed in the Base Integration Object field are not sorted alphabetically ACR 543: Provides a query option to retrieve required workflows in the Choose Workflow screen 12920858 13345955 Resource Adapter Resource Adapter
11733621
Resource Adapter Resource Adapter Resource Adapter Resource Adapter Resource Adapter Resource Adapter Resource Adapter
10591253
10591252
Resource Adapter
10591466
10591460
Resource Adapter
Web Services
114
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID 12727594 Base Bug ID 12673517 Subcomponent Inbound Special Instructions
Issue Addressed When users generate WSDL for any inbound Web service from any non-Windows environment, import it in the SOAP UI and send a request for query method, a blank page displays and users receive an error message When an invalid value is passed to pagesize, the application crashes instead of providing an error message Requests greater than 25 KB are not being returned from inbound HTTP requests In the fix for Bug 12763892, the business object is not released for the Leads service, which causes performance issues Outbound Web services do not work when calling a method that is hosted on WLS
12953834
Inbound
12736823
Inbound
13063284
Inbound
10605839
10584990
Outbound
13384863
13384850
Connector
11 5
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID 10591636 Base Bug ID 10591201 Subcomponent Connector Special Instructions
Issue Addressed The Object Manager allocates buffer memory for the CLOB data type based on the size of columns and not based on the size of the data An Oracle Connector CLOB + OCI descriptor leak occurs In DB2/ZOS V10, the changed catalog table SYSIBM.SYSTRIGGERS catalog table was changed in a way that made it incompatible When resuming a task, fields that have the DATETIME type no longer hold their original values In version 8.1.1.6, on Microsoft Windows 2008 R2, the Generate New Database job does not terminate and continues running
13024449 13088789
10597810
12800053
MS SQL Server
12995880
12355084
MS SQL Server
12860325
WebPhone
116
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID 12784519 Base Bug ID 11728298 Subcomponent HTML Special Instructions
Issue Addressed Records that contain a + sign in row_d cause the Wireless application to crash Allows for read-only to be applicable to a TextArea control as well as a Text control
12572213
12922570
Lotus Notes
CRM Desktop
The copyright information is not displayed correctly Provides a mechanism to upload an entire metadata package in a single file Error message for invalid packages are not translated to Japanese Recurring event exceptions are not reflected in attendee calendars When users create a new meeting, invite attendees, send the invite, and then sync, a sync issue appears Duplicate calendar items are created if an attendee is added after the first sync 10587345 12831330 12831319 Admin Admin
12597920
Data Sync
13341578
11729977
Data Sync
13477759
Data Sync
13391431
Data Sync
11 7
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID 12997576 Base Bug ID Subcomponent Installation Special Instructions
Issue Addressed On Microsoft Windows 7, the CRM Desktop shortcut does not launch the CRM Desktop Garbage characters display on the installation page Allows non-ENU users to launch the Siebel application from CRM Desktop using the URL that matches their chosen language by defaulting the eai_XXX URL to the chosen language There is an installation limitation when a user has multiple Exchange mailboxes in a single profile Adds the client version to the MSI Installation file's properties so that it is easy to determine. The New Email button is not the same as it was in previous versions Installation fails if the user's AppData folder is a UNC path In the Hebrew application, within the Account Entry applet, the Address Created date value is incorrectly formatted Non-primary employees can delete activities When users try to connect to the incorrect server, the resulting error message is not translated to Japanese
12423742 11742817
Installation Installation
13392118
Installation
13018849
Installation
13397152
Installation
10606202 10590982
10597053 12418939
118
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID 10590813 Base Bug ID Subcomponent Outlook Client Special Instructions
Issue Addressed In the Hebrew application, the content within the First Run Assistant > Settings wizard does not display from right to left In the Hebrew application, witin the First Run Assistant wizard, the check boxes appear on the wrong side In the Hebrew application, the Importing Package progress bar does not display from right to left In the Attachment filter, some of the values in the Field dropdown list are not translated into Japanese With "process_attachments" turned on, an invalid duplicate attachment is created. The CRM Desktop button launches the incorrect Siebel application If a toolbar has been customized, an invalid pointer error occurs during download When users click the Share bar to unshare a contact, after users click Yes in the confirmation dialog box, the contact is still shared Within the Control Panel > Confirm Synchronization tab, messages are not in Japanese After CRM Desktop 3.04.20.08 has been installed, the Next Item (CTRL + >) and Previous Item (CTRL + <) functions do not work once an email has been opened
10590807
Outlook Client
10590815
Outlook Client
12533099
Outlook Client
13393305
Outlook Client
10590926
Outlook Client
11807413
Outlook Client
12533287
Outlook Client
12429544
Outlook Client
12698073
Outlook Client
11 9
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID 13025363 10590997 Base Bug ID Subcomponent Outlook Client Outlook Client Special Instructions
Issue Addressed Provides Right-to-Left language support Screen alignment is not correct for right-to-left languages When issues occur after synchronization, there is no notification message to inform the user Implements forward-only cursor mode to improve performance and remove the 10,000 record limitation When the Siebel Server fetches 50 records, it takes more than 70 seconds
12429594
Outlook Client
10606075
10585409
Performance
10604267
10604196
Performance
SSSE
Adds script file for granting permissions for SSSE Service User in an Exchange 2010 environment When the calendar is updated in the Siebel application, the organizer receives a notification 13091138 13091177 Administration
10598827
10598740
Calendar
120
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID Base Bug ID Subcomponent Special Instructions
Issue Addressed
Config - Scripting
Calling multiple methods in a single statement on smartscript objects produces a compile error "Nested with" statement blocks do not resolve correct references Calling a task from eScript crashes the Object Manager 12865043 ST Engine
12833238
ST Engine
10549592
T Engine
Integration Scripting
Crashes occur two to three times a day on production servers Deduce Types requires a return statement in the catch block to compile 12570179 New eScript Engine
10582714
10534318
Config - Rules
The Workflow Utilities Echo Method output property takes values randomly from other input properties Activating a workflow process in one repository inactivates a workflow in another repository 13117431 Workflow Process Execution
12658950
12 1
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID 12591236 Base Bug ID 12405401 Subcomponent Workflow Process Execution Workflow Process Execution Special Instructions
Issue Addressed Modulus operator MOD in the expression builder does not produce correct results Unwanted SQL select statements occur when using a Siebel operation in a subworkflow
13033536
12879239
Server Infrastructure
A core file is created when the Siebel Gateway Server is stopped 12431050 10643339 Siebsrvr and Shells
Object Manager
When DB connection pooling is used, an Object Manager crash occurs in the eComm OM in SqlCursor5CloseEv event 12577313 Business Components
122
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID 10602278 Base Bug ID 10485907 Subcomponent Other Special Instructions
Issue Addressed GetSearchSpec/ SetSearchSpec unable to handle strings with apostrophes in SVB
10566356
10566354
Calendar
SI Web UI
Allows calendar to work after installation of non-res:// calendar implementation Within Contacts, Calendar Tool Tips for appointments do not display meeting information Addresses various issues around dragging calendar appointments Allows suppression of the timestamp for events on the 7Day calendar In the Hebrew version of the application, the cursor sticks when typing text Within the Portuguese and Spanish applications, the calendar displays in English If an employee's name contains a single quote, that employee's calendar cannot be accessed 12741601 Calendar
12838557
Calendar
12869678
10595170
Calendar
11682527
11682517
Calendar
10536337
10529645
Calendar
10605376
10605375
Calendar
12805219
Calendar
12 3
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID 13082392 Base Bug ID 12730479 Subcomponent Calendar Special Instructions
Issue Addressed With the Casablanca timezone, the first weekend in April displays incorrectly When users create a contact record using copy-and-paste functionality, an error message appears After version 8.1.1.5 has been applied, the Siebel application does not send parameters to Actuate After version 8.0.0.10 has been applied, special characters appear in dropdown lists When a session timeout occurs, the application crashes An empty shuttle applet appears when users click within the application When there are two duplicate account names, importing contacts adds an entry to the first account in the contact list Within ePublic Sector, within the Service Tab > Service Requests list view, when users click New in the form applet, enter the first three letters of the contact in the Owner field, and then try to select a user in the Pick Service Request Owner applet, an error message occurs Tabs are not hidden in eService Scripts execute twice The application hangs if users click Enter instead of Alt + Enter to run a query
12831075
12578368
Controls
12822135
Controls
13095646
11810469
Controls
10545453 12807613
10537307 12653248
12991744
10598313
12984684
11711790
Popups
124
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID 12768910 Base Bug ID 12407059 Subcomponent UI Behavior Special Instructions
Issue Addressed SQL generated on the Clinical Trip Report business component does not honor search specifications On the Mobile Web Client, when EnableFQDN=FALSE, Amazon links are not visible In version 8.1.1.5, within the Accounts screen, when users add a number to a site record and then press CTRL+an arrow key or CTRL+Save, they receive an error message When users press F9 and enter text in the subject line or body of the email, some characters do not display Within a service request, when users press F9 to send an email, choose a template in the Send Communciation applet, add the contents of the email, and then send it, the email content is missing from the received email When users select multiple records by pressing Shift, not all of the records are selected
12882858
UI Behavior
12711326
UI Behavior
12772458
UI Behavior
12958059
10598010
UI Behavior
12997878
10600303
UI Behavior
12 5
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID 12959307 Base Bug ID 12420463 Subcomponent Solaris 10/Sparc Special Instructions
Issue Addressed Provides a mechanism to set the default stack size for Posix threads on all UNIX platforms After version 8.1.1.6 has been installed, SWSE configuration fails The "./STARTAPA-SSL function does not work to enable SSL on the HP platform
13055566
Solaris 10/x86
12971646
11825060
Web Server
126
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID 10603651 Base Bug ID 10601933 Subcomponent Schema Special Instructions
Issue Addressed EIM_PRPDTL_TNT does not resolve foreign keys for custom mapping
EIM
The eim45.sql file for 8.1.1.x Fix Packs is not the same as it is for the 8.1.1 base release While loading through EIM, an error occurs while setting the primary value 13013178 EIM Table Mappings
10560634
Siebel Documents
Documents
ACR 628: The Submit and Done buttons are enabled for failed correspondences 12434735 11895574 Correspondence
12 7
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID 13450349 Base Bug ID Subcomponent Special Instructions
Issue Addressed Within the Call Execution view, the Validate button does not behave consistently The system allows enables capturing signature on paper and call submission without any samples The Interactive Detailed button is disabled in the UI. Within the Chinese application, the confirmation message that appears after users submit a contact call is translated incorrectly
13431474
13430280
Handheld
Allows users to disable buttons within Pharma Handheld 11677627 10606138
License Key
Customers who have Call Activities option enabled should be able to view the call execution views 13078935
128
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID 13450252 Base Bug ID Subcomponent Special Instructions
Issue Addressed Within Contact > Contact Call, when users create a new call and click for Interactive Detailing, when they click the Close button in the ID dialog box, the ID dialog box does not close Within Interactive Detailing, clicking the Sign button does not call the Signature method
13450272
13373799
13373760 13375345
Product Issues
ACR 712: The Device Available field information contains values other than Yes and No ACR 712: The Send to Safety button sends incorrect data 12943304
13085829
12 9
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID Base Bug ID Subcomponent Special Instructions
Issue Addressed
Samples
Smart Calls with Promotional Items do not work as expected. 12757663 10601541
Samples - Handheld
When users adjust sample quantities on the PDA, they receive an "end of file" error message 12586387
Site Management
ACR 839: Provides enhancements to capture the geographical details of a site ACR 839: Provides Web services to provide information about protocols, sites, and site visits when they are created in CTMS to other applications used in biotechnology and pharmaceutical companies 12998082 Yes, see Instructions for ACR 839 on page 70. Yes, see Instructions for ACR 839 on page 70.
12998073
Smart Calls
Products in smart calls are not applied 10604049 10578468
Web Services
130 Siebel Maintenance Release Guide Version 8.1.1.7, Rev. A
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID 12976643 Base Bug ID Subcomponent Special Instructions Yes, see Instructions for ACR 762 on page 61.
Issue Addressed ACR 762: Ports SonGo Web services to Siebel applications version 8.1.1.x for iSales
Siebel Loyalty
Accruals
When the Process External Transaction method of LOY Accrual Services is invoked through Web services from SOAP UI with Request Mode as Simulate, the ACCRUED VALUE field in the output xml does not show decimals and only shows integers Within version 8.1.1, points round if the points value is a decimal value Decimal points are not rounded up 12845264
10570794
10570253
10600607
Member Administration
ACR 802: Provides Bulk Administration enhancements and redemption concurrency functionality Bulk Admin functionality only processes 11 records in a set when bulk unit size is greater than 11 The Bulk Admin Membership process remains in the InProgress state even after a workflow is activated There is no Go button in the Bulk Admin applet, so users have to press Enter to run a query 12558122 Yes, see Instructions for ACR 802 on page 67.
13039511
12997281
13039598
13 1
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID 13033551 Base Bug ID Subcomponent Special Instructions
Issue Addressed The error log shows duplicate invalid member numbers when at least one member is valid in a set defined by Bulk Unit Size Incorrect validation error messages occur when users click the Process button The Member Merge functionality does not merge or combine enrolled promotions Merge actions do not work for member field attributes On the Solaris platform, Bulk Admin functionality appends \A to the file name
13039569
13027135
10562859 13034597
Member Services
Within the Loyalty Member screen, when users create contacts and do not provide enough information, the application does not navigate them back to the Loyalty Member screen to enter the missing information 12583802 10593362
Other
Within Administration > Product > Products List > More Info > Points, users cannot insert decimal values in the Point field Slow SQL occurs for the LOY All Transactions view "10547259
12664236
10605463
Partner Administration
The end date is not considered for the Precalculated Accrual condition 12952157 12952144
132
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID Base Bug ID Subcomponent Special Instructions
Issue Addressed
Promotions
The Does Not Equal and Empty conditions do not perform as expected Allows for an integer division operator in the promotion rule definition.txt file Allows calculations not to round to two decimal places Allows calculations not to round to two decimal places 12948668
10501048
Redemptions
Resolves a problem with concurrency in the redemption process When 100 postings are initiated for the GetPriceOption scenario, each posting takes 25 to 38 seconds Users cannot redeem decimal values while processing redemption transactions 12663663
12664159
12338939
10581810
Tiers
Allows users to set up Assign Points and Redeem Points actions within Tier Promotions 12663588 Yes, see Instructions for Bug 12663588 on page 143.
Siebel Reports
Reports BI Pubisher App
The XMLP Purge Records workflow does not delete all of the reports 11828119 11824462 Call Center
13 3
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID 12931618 Base Bug ID 12629343 Subcomponent Common Components Common Components Internationalization Special Instructions
Issue Addressed After users run a report that contains no rows, the following reports also return no rows After users run a report that contains no rows, the following reports also return no rows Users cannot execute BI Publisher reports for languages that have not been shipped
12931619
11830300
12627637
Connector
Connector Connector
13442150 11723184
Connector Connector
12907125
Connector
134
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID 11733046 Base Bug ID 12374984 Subcomponent Connector Special Instructions
Issue Addressed Adding responsibilities through Siebel security model should only query for XMLP* responsibilities, not all 700+ responsibilities It is not possible to run multiple-language reports on a single object When duplicate report names are entered, the incorrect error message displays Within the Administrator - BI Publisher Reports > Reports Custom Templates screen, when users create a custom template with a different naming convention for RTF and XLIFF files and click Upload, they receive the following error message: "Report XLIFF file must have filename in "<Report Template Filename>_<Locale Code>.xlf" format (SBL-RPT50584) Includes a method on the Report business service to enable reports that are submitted using a business service to be automatically sent to email recipients that have been defined on the BI Publisher server Includes a method on the Report business service to enable scheduled reports submitted using a business service
12384180
Connector
11733031
11731294
Connector
11773906
Connector
12627598
Connector
12627588
Connector
13 5
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID 12627610 Base Bug ID Subcomponent Connector Special Instructions
Issue Addressed Includes a method on the Report business service to allow reports submitted through a business service to be sent to a delivery channel (such as ftp, webdav) that has been defined on the BI Publisher Server In version 8.1.1.6, within <Tools Install location>\REPPATCH\BIP_811 5\SIA\REPOSITORY, the SIF files are incorrectly named Provides enhancements to the My Reports view When no search specification has been given, no error message displays for a nonprimary integration object The successful-upload error message does not appear when users upload a template for the first time Parameter labels are not aligned correctly in the Parameters dialog box Parameterized reports are not supported in Scheduler When a user without the XMLP_Developer responsibility tries to generate a report using a template, the application window refreshes and becomes smaller instead of yielding an error message that the user does not have the XMLP_Developer responsibility The Report business service does not have the Custom Report Name Input property
12971470
Connector
12780408 11731294
Connector Connector
11773937
10596309
Connector
11901290
Connector
11723728 13469718
Connector Connector
12627606
Connector
136
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID 12627683 Base Bug ID Subcomponent Connector Special Instructions
Issue Addressed Report parameter LOVs are restricted to the Report business object Within the My Repors view, the status of In Progress is invalid Within the Report Template Registration applet, when users click Upload, there is no confirmation message Within the Report Template Registration applet, when users click Upload, there is no confirmation message Query strings are not passed as part of XML The BI Publisher Report business service does not launch on the Mobile Web Client The BI Publisher Report business service does not launch on the Mobile Web Client Users cannot set HTTPSleepTime for BI Publisher integration When the BIP Report Wait Time threshold is exceeded, the popup window that displays is not in focus Reports that are created in the Custom Templates view do not display on the Mobile Web Client When users try to create a new report with the same name as an existing report, they do not receive an error message
10562579 10551927
10551799
Connector Connector
10551928
10551927
Connector
10594924 10562793
10559184 10562792
Connector Connector
10562792
Connector
10606449
10571200
Connector
10590983
10587343
Connector
10595951
10595950
Connector
10596309
10596288
Connector
13 7
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID 10603328 Base Bug ID 10603312 Subcomponent Connector Special Instructions
Issue Addressed Reports fail when the ''> Today () AND < Today () +365' fuctions are used within the Close Date field It is not possible to disable BI Publisher Reports Scheduling option When reports are scheduled with an MLOV-enabled XMLP_RPT_SCHEDULE_MODE, all reports run immediately It is not possible to upload multiple .xlf translation files.
12425291
10604432
Connector
11684153
10605466
Connector
10605829
10605732
Connector
Error Messages
Allows users to be able to create new records in the Attachment business component based on the parent business component record Within My Reports View detail applet, the View Mode field is not populated Error messages in the Schedule applet should use Toggle Case to refer to labels Search specifications fail for custom templates with multiple integration objects Executing a BIP reporexpression on the secondary integration object fails with the following error message: SBL-DAT-00224: An error with an invalid syntax for a business object query has occurred BI Publisher does not execute in "Forward Only" mode 13105473 Error Messages
13105398
Error Messages
11653426
Error Messages
11854060
11731294
Error Messages
11802808
Error Messages
10594954
10585407
Error Messages
138
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID 10596205 10596208 Base Bug ID Subcomponent Error Messages Error Messages Special Instructions
Issue Addressed Report name validation messages are not translated The Job Name validation message is not translated within the Report Scheduler window
Remote
Upgrade Wizard fails with the "Unable to uncompress file" error message In certain cases, DB Xtract does not create a required records in s_node_pref Allows the client executable KIT for patch deployment to be created on the Siebel application when it is running on the UNIX platform Within DB Server Configuration screens, there are buttons with no strings Transaction Processor does not delete EIM DX files Database performance degradation occurs when queries use S_DOCK_TXN_SET On the MSSQL database, the TxnProc component fails with an error message 10596340 10594120 DB Init
10578939
10574894
DBxtract
13003564
12757714
Other
10568170
10555174
Other
12937222 12553093
10499137
12369618
10578784
Txn Processor
13 9
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID Base Bug ID Subcomponent Special Instructions
Issue Addressed
Diary
Within User Preferences > Function Space Diary screen, the Color Display By field should not have the default value defined When users navigate to a diary for a property that has reserved bookings and more than one visible frame of Function Spaces, when they use the double-scroll-down button and drill down on the Function Space Reservation link, Internet Explorer crashes The Function Space Diary view does not display correctly with Time Scale as "Month/Day-ofWeek Part" and "Week/Day/ Day Part" Users are not able to set up modified icons in Function Space Diary The Diary functionality fails when users query for a specific date 12906967 13090315
12955227
13090315
12876544
13090315
12876539
13090315
12857901
Error Message
When users drag and drop over an existing booking, they receive an error message 13419996
140
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID Base Bug ID Subcomponent Special Instructions
Issue Addressed
FS Administration
Within the Function Space Diary screen, when users query on a property without changing the date, function spaces do not display 11818894
Functions
Allows the user to disable the Assign to Category option on the right-click menu When users attempt to cancel a function, they receive an error message 13415909 13415880
12654431
12608701
Inventory
Users are allowed to reserve a specific space multiple times 12926373 12921815
Orders
Non-core function line items do not display in BEO reports 13006790 13090315
Orders/Functions
Within Orders > Functions > Line Items, when a line item does not contain any records, the Add Item button is disabled Within Event Order > Function, the Add button does not perform as expected When users click the Split Check button, they receive an error message 12312702
12756997
12807436
Other
ACR 575: Provides enchancements to the Diary functionality 10561607 Yes, see Instructions for ACR 575 on page 15.
14 1
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Resolved Change Requests in the Siebel 8.1.1.7 Fix Pack
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID Base Bug ID Subcomponent Special Instructions
Issue Addressed
Properties
Within the TNT SHM Property Projected/Blocked list applet, when users click the Query Date button, execute a blank query, and then press CTRL+S, an error message appears 12899450 13090315
Property Admin
The Apply Package button is not disabled for NFLI whose applies-to information is CMP 13086795 13090315
Quote
If Package Non Function line items contain menu items, an error occurs when users try to apply the meeting package Within the Quote > Timeshift Summary view, when users select the Accept Shifted/ Reject Shifted menu option, room blocks are not accepted or rejected Inline changes to Arrival Date information for a quote do not change a meeting package's Start Date information When users create a quote from an opportunity, a full table scan is performed on the S_OPTY table, which causes performance issues Reapplying packages also recreates the functions 12970701 13090315
13367536
12913708
13090315
12733277
13028585
13090315
Reports - Hospitality
Within Account Profile reports, the Account Discount field only recognizes integers 10603524 10603523
142
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Oracle Welcomes Your Comments
Table 44.
Resolved Bugs in the Siebel 8.1.1.7 Fix Pack Bug ID 10604999 Base Bug ID 10604146 Subcomponent Special Instructions
Issue Addressed The $ symbol does not display for the Rate field
Room Block
When users drill down from Quotes, the New button is disabled on Room Block line items Within the Room Block applet, when users click New to add a new room block, the value in the Projected field does not default to 0 11932544
10603618
10603617
14 3
Siebel Maintenance Release Guide, Version 8.1.1.7, Rev. A Oracle Welcomes Your Comments
The title and version of the guide (very important) The name and version number of the Siebel application you are using Your name, job title or functional area, company name, phone number, and email address
Contact us through regular mail or email at: Oracle Siebel Technical Publications Department 500 Oracle Parkway Redwood Shores, CA 94065 Siebeldoc_ww@oracle.com We appreciate your feedback.
144