Академический Документы
Профессиональный Документы
Культура Документы
* *
DNV
03 / 2001
The Advanced System Simulator ASIMA developed by ELWE is an advanced version of the System Simulator ASIM which, for many years, has been very reliable and copied several times. The new version sets new standards: The System Simulator ASIMA can be used in combination with all PLC products that are equipped with standard signal levels for digital (24 V DC) and analog (0 ... 10 V DC) inputs and outputs. 33 masks are subdivided into three mask sets, corresponding to the level of the PLC programs that are to be designed, according to the assignments. The range of assignments allows you to study the field of automation without previous knowledge starting with small control circuits and also upmarket solution strategies by using the full scale of functions offered by large programmable logical control systems. The front panel is clearly structured containing the connection panel for the PLC connection, a demonstration panel to hold a mask with a large image of the system and a system-specific labelled control panel. Due to the use of a microprocessor, up to 12 digital inputs and outputs, 2 analog inputs and outputs and 2 potentiometers are clearly assigned to the control panel as well as the sensors and actuators of the system image on the applied mask. Many system simulation processes run automatically due to the microprocessor, so that the system functions can be clearly observed. It also facilitates testing the designed PLC programs. The simulator can be connected to the PLC either practically via individual connection cables and 4-mm safety sockets or alternatively via a flat-ribbon cable and the 50-pin connector without set-up times. 4 relay contacts allow you to connect solenoids for safe control of illustrated actuators as in real applications. All individual switch and sensor functions can be physically selected as a make or break contact with a change-over switch to allow a connection to the PLC which is safe to line breakage as in real applications. A microprocessor-controlled LED strip with 24 segments indicates levels, movements, positions etc. in the connection scheme on the applied mask. 36 red, yellow and green LEDs are assigned to the digital inputs and outputs by the microprocessor according to the selected system on the appropriate mask and indicate the illustrated sensor and actuator states. Analog variables of a system function, such as the unload speed of a silo, the flow rate of a pump or setpoint values can be changed either with the potentiometer on the control panel or with analog signals from the PLC.
The equipment set ASIMA includes the system simulator, a CD with assignments for the masks of the three mask sets and a bag for storing available masks separately. An optional CD (art. no. 52 12 641 09) contains the assignment results for all mask sets or masks in form of a statement list according to IEC 6-1131.
Equipment ASIMA incl. bag and assignment set on CD . . . . . . . . . . Equipment functions: 12 digital inputs, 12 digital outputs 2 analog inputs, 2 analog outputs 4 relay contacts (break contacts) control and display elements:
6 pushbuttons, 6 push-grid buttons, 33 LEDs 2 analog adjusters, 0 ... 10 V 1 red beam display with 24 segments digital input and output levels, 24 V DC analog input and output voltages, 0 ... 10 V DC necessary voltage supply of 24 V DC, 0.7 A max. Dimensions in mm: 440 x 297 x 120 (W x H x D) Mass in kg: 4,3
24 12 210
ASIMA 24 12 210
Mask set I
to design and test simple PLC programs using examples of classical contactor control systems.
to design and test medium-level and top-level PLC programs using examples of clearly illustrated processes and incorporating analog functions.
For the necessary inputs and outputs on a PLC for the respective installation or system, please see the table opposite:
M1
24 12 215
For an overview of all other masks, please see the next page.
Mask M1 Mask M2 Mask M3 Mask M4 Mask M5 Mask M6 Mask M7 Mask M8 Mask M9 Mask M10 Mask M11 Mask M12 Mask M13 Mask M14 Mask M15 Mask M16 Mask M17 Mask M18 Mask M19 Mask M20 Mask M21 Mask M22 Mask M23 Mask M40 Mask M41 Mask M42 Mask M43 Mask M44 Mask M45 Mask M46 Mask M47 Mask M48 Mask M49
Logic basic functions Digital function modules Motor on/off Reversing contactor Star-delta connection Reversing star-delta connection Pendulum table Dahlander circuit Motor with 2 separate windings Starting a wound-rotor motor Conveyor belt system Reactive-current compensation Heating control Running light Automatic filling system Tank system Coal grinder Embossing machine Fan control Traffic light for road works Traffic lights Collecting belt conveyor Conveyor charging system Silo control Reactor Goods lift Pump control Dirty-water pump system Monitoring of 3 pumps Pump system (pressure) Drinks machine Mixer Sequence control
M2
24 12 216
M3
24 12 217
M4
24 12 218
M5
24 12 219
M6
24 12 220
M7
24 12 221
M8
24 12 222
M9
24 12 223
M10
24 12 224
M11
24 12 225
M12
24 12 226
M13
24 12 227
Training systems for basic and future oriented education in natural science and engineering
M14
24 12 228
M15
24 12 229
M16
24 12 230
M17
24 12 231
M18
24 12 232
M19
24 12 233
M20
24 12 234
M21
24 12 235
M22
24 12 236
M23
24 12 237
M40
24 12 240
M41
24 12 241
M42
24 12 242
M43
24 12 243
M44
24 12 244
M45
24 12 245
M46
24 12 246
M47
24 12 247
M48
24 12 248
M49
24 12 249
Factory / Head office: ELWE-Lehrsysteme GmbH Elwestrae 6 D - 38162 Cremlingen / Schandelah Subject matter to change!
wp 12 07 20 - 03/01