Академический Документы
Профессиональный Документы
Культура Документы
T inst df hmin
l
Metal Products
dnom
2
do
lG
h0
Name 1 2 Drop in Anchor Setting tool Zinc plated steel / stainless A4 Zinc plated steel Features Face or through fixing
Building materials
Concrete C20/25 - C50/60 uncracked Natural stone with high density
Characteristics Recommended for lightweight suspended ceilings according to DIN 18168 in concrete C20/25 Internally threaded anchor for metric screws of M6 - M 20 and loads up to 16 kN (in cracked concrete on the ceiling up to 1 kN / m2) Can be used with screws from most materials Strengthened design M12 with anchor 16 for use with diamond drill rigs and saws Use in reinforced or not reinforced concrete of the strength class C20/25 Applications
Installation
Drilling with depth gauge rod Clean the drill hole Insert the Drop in Anchor Drive the cone into the plug with a setting tool Tighten the building materials with the predetermined torque setting The screw can be dismantled anytime (anchor stays expanded in the base material)
Version 3 / 2009
2.36
mungo Befestigungstechnik AG
Metal Products
Loads in application of single anchorage ESA NRec VRec cmin smin hmin Tinst Anchor size - Concrete C20/25 Shear load Minimal edge distance Minimal distance between anchors Min. thickness of foundation Tighten torque kN mm Nm M8 2 2 90 180 100 8 M10 3 3 120 240 120 15
Loads in application of lightweight ceilings and anchorage according to DIN 18168 ESA / ESAr stainless A4 Anchor NRec - Concrete C20/25 - C50/60 cmin smin hmin Tinst Minimal edge distance Minimal distance between anchors Min. thickness of foundation Tighten torque M6 0.5 100 400 100 2 M8 0.5 100 400 100 3 M10 0.8 100 400 100 6 M12 0.8 200 400 100 15
kN mm mm mm Nm
Recommended loads in application of single anchorage NRec VRec Tinst h0 d0 dcut df Anchor size - Concrete C20/25 - C50/60 Shear load Tighten torque Drill hole depth Drill hole- Max. drill bit- Clearance hole in fixture Thread length Outside- anchor Anchor length Material kN kN Nm mm mm mm mm mm mm mm galvan. M6 1.5 1.5 5 28 8 8.45 7 11 8 25 stainless galvan. galvan. M8 2 2 8 33 10 10.45 9 13 15 10 30 stainless galvan. galvan. M10 M12 M16 7.4 12 60 71 20 20.5 18 23 30 20 65 stainless galvan. galvan.
K)
lG l
dnom
3 5.3 3 5.3 15 35 44 54 12 15 16 15 12.5 15.5 16.5 15.5 12 14 15 17 18 20 12 15 16 15 40 50 stainless stainless galvan. galvan. galvan. galvan. 1740212
1740106F
1740108F
1740110F
1740112F
17400132)
1740116F
1740206
1750008
1740208
1750010
1740210
1750012
1750016
K)
K)
K)
K)
K)
Setting tool ESA-WZ zu ESA / ESAr / ESAK M6 1770006 M8 1770008 M10 1770010 M12 1770012 M16 1770016 M20 1770020
mungo Befestigungstechnik AG
1740216
175006