Академический Документы
Профессиональный Документы
Культура Документы
1st Edition
And
sensors
April 2009
Tiny, low-power smartphone solutions pages 2, 3 High-performance notebook solutions pages 4, 5 Efficient communications solutions pages 6, 7 Four-bump innovations page 8 Digital port protection page 11
Maxim is a registered trademark of Maxim Integrated Products, Inc. 2009 Maxim Integrated Products, Inc. All rights reserved.
6-SOT23
MAX4231/33
www.maxim-ic.com/Audio www.maxim-ic.com/Video
UCSP is a trademark and MAX is a registered trademark of Maxim Integrated Products, Inc.
IR PROXIMITY SENSING
HIGH BANDWIDTH FOR AC SIGNAL GAIN
C
Rx IINFRARED ADC Tx
MAX4231
C
ADC
MAX4236
VREF R 50R
ACCESSORY DETECTION
VCC VDD
VDD
ACCESSORY
VCC
REF IN
OUT
SYSTEM CONTROLLER
MAX9075
CLK VREF
SIM CARD
GND
DATA
MAX9060
VBAT
L O A D
VBAT
L O A D
VREF
C
ADC
MAX9938
MAX9018
Video and audio out Op amps Audio subsystems Headphone and speaker amps Boosted amps Audio amps
ASIC
MAX4209H
TO SYSTEM CONTROLLER
MAX9940
The MAX9940 protects the C from an overvoltage condition, and then automatically resets when the fault condition ends.
MAX9922
SHDN
MAX9922/MAX9923 Ultra-precision, 10V (max) input offset voltage (VOS) over temperature 0.5% (max) full-scale gain accuracy 1.9V to 28V input common-mode voltage (VCM) 2.85V to 5.5V single-supply operation Space-saving, 10-pin MAX package
MAX9940
GND
MAX9940 28V protection on EXT Extended ESD protection 13A quiescent supply current 2.2V to 5.5V single-supply operation Small, 5-pin SC70 package
1F AUDIO L
MIC L MIC R
MAX4232
AUDIO R
MAX4232 Lab-tested RF immunity 10MHz gain-bandwidth product 30mA output-drive capability 2.7V to 5.5V single-supply operation Space-saving, 8-pin SOT23 package
50
MAX4080
VDRAIN = 30V
C
RFOUT
RFIN
GND
MAX9930/MAX9931/MAX9932 2MHz to 1.6GHz frequency range Fast response: 70ns in 10dB steps 10mA output sourcing capability Low power: 17mW at 3V (typ) Space-saving, 8-pin MAX package
A1
MAX4080 MAX4081
Q1
CURRENT MIRROR
IA2 A2 A3
OUT
MAX4080/MAX4081 Wide, 4.5V to 76V input common- mode range 0.1% full-scale accuracy Low, 100V input VOS 75A supply current Space-saving, 8-pin MAX package
RFIN
LOG DETECTOR
MAX9030
ASK
CCLPF
MAX9933 2MHz to 1.6GHz frequency range Fast response: 70ns in 10dB steps 10mA output sourcing capability Low power: 17mW at 3V (typ) Space-saving, 8-pin MAX package
LOAD C
INTERNAL PULLUP
C
IN
P OUT ADC
MAX9060
GND
MAX9938
MAX9060 low-power comparator Low -0.3V to +5.5V operation Available with internal or external reference 15s propagation delay -40C to +85C extended temperature range
MAX9938 low-power current-sense amp Wide 1.6V to 28V VCM Ideal for portable and notebook applications Low 500V (max) VOS Enables use of small sense resistor (50m) Four gain versions available 25V/V (MAX9938T) 50V/V (MAX9938F) 100V/V (MAX9938H) 200V/V (MAX9938W) -40C to +85C extended temperature range
1/2
MAX9944
6V to 38V single-supply operation, 3V to 19V dual-supply operation 100V (max) VOS 0.4V/C offset drift 2.4MHz gain-bandwidth product 20mA output current 550A supply current per amp
VREF
1/2
MAX9944
RSENSE RLOAD
-18V
4.75V to 38V single-supply operation, 2.4V to 19V dual-supply operation 1fA/Hz input-current noise density 15nV/Hz input-voltage noise density Low, 50fA input bias current 3MHz gain-bandwidth product 400A supply current
MAX9945
IN+ VEE -15V
ADC
PGA with SPI bus brings all of your applications within range
Full-featured PGA has internal op amp and 16V-protected differential inputs
Industrial applications requiring wide gain variation and high signal bandwidth can benefit from using the MAX9939 programmable-gain amplifier (PGA). It features a wide gain range from 0.2V/V to 157V/V, programmable input offset-voltage trim, high signal bandwidth (~2MHz at all gains), and an internal op amp that can be used as an active filter or to create differential outputs.
VCC
VCC
MAX9939
VCC
VCC/2 VCC/2
OUTA
ASIC
INB VCC
GAIN
SHUTDOWN VCC/2
OUTB
ADC
SPI REGISTERS
SCLK DIN CS GND
CS DOUT SCLK
Features Programmable gain and programmable VOS Differential inputs with high common-mode rejection and protection to 16V Single-supply VCC , but can amplify bipolar input signals Integrated op amp for application flexibility SPI bus with 10MHz operation
SPI is a trademark of Motorola, Inc.
Applications Sensorless motor control Sonar and data acquisition Medical instrumentation Sensor signal conditioning
10
NOTEBOOK
VDD 3.3V
ADAPTER
LOAD
ENABLE
VCC
C
2k
MAX9940
PROTECTION CIRCUIT DATA INT N EXT
1-Wire DEVICE
Rx
20V
Rx
Tx
Tx
GND
Features 28V protection on EXT Extended ESD protection 4kV IEC 61000-4 contact on EXT 13A quiescent supply current 60ns fault reaction time -40C to +125C temperature range
1-Wire is a registered trademark of Maxim Integrated Products, Inc.
11
SPEED-TO-POWER RATIO
Features High 1MHz gain bandwidth at 20A Ultra-low 20A supply current 1.8V to 5.5V single-supply operation Ultra-low, 1pA input bias current Rail-to-rail input and output voltage ranges Low 200V VOS Low 0.001A shutdown current High-impedance output during shutdown (MAX9915/MAX9917) Unity-gain stable Available in tiny SC70, SOT23, and MAX packages
Applications Portable medical devices Portable test equipment Handheld consumer equipment Data-acquisition equipment Notebooks RF tags
MAX9914/MAX9917
12
Industrys first two-wire Hall-effect sensor interface saves space and cost in automotive applications
Dual Hall-effect sensor interface includes diagnostics
The MAX9921 provides a single-chip solution for interfacing two Hall-effect sensors to a low-voltage microprocessor (P). This device supplies and monitors the current drawn by two Hall-effect sensors, filters the sensed current level, and outputs the corresponding logic level. The MAX9921 includes input diagnostics and fault protection and is ideal for speed detection in automotive applications, such as window lifters and electric sunroofs.
Ideal for window lifters (antipinch control), magnetic relays, automatic doors, seatbelt buckles, electric sunroofs, powered liftgate controllers
Output filter eliminates glitching ECU
Ideal for window lifters (antipinch control), magnetic Automotive relays, automatic doors, temperature seatbelt buckles, electric range sunroofs, powered liftgate controllers
Withstands up to 60V load dumps
VBAT
Robust design survives shorts to ground, shorts to battery, and 15kV (HBM) strikes
FILTER
OUT1
MAX9921
GND
High-side current-sense architecture eliminates need for a ground return wire without introducing ground shift
Improves performance and reliability Protects Hall-effect sensor inputs from shorts to ground Integrated diagnostics detect shorts, opens, and battery faults Withstands up to 60V load dump Integrated deglitching output filter Operates with 2V ground shifts between Hall-effect sensor and MAX9921
Saves space and cost High-side, current-sense architecture eliminates the need for a ground return wire Eliminates up to 10 discrete components Two complete sensor interface channels in a single, 3mm x 5mm MAX package
13
Industrys first differential VR sensor interface integrates adaptive and zero-cross thresholds
Improves performance and reliability in automotive engine applications
The MAX9924MAX9927 variable reluctance (VR) sensor interfaces are ideal for engine crank-shaft and cam-shaft speed and phase detection. A zero-cross trigger allows reliable center-of-tooth detection, while the integrated differential amplifiers adaptive threshold and high CMRR provide excellent noise immunity. The MAX9924MAX9927 are designed to interface to both single-ended and differential-ended VR sensors.
ENGINE BLOCK
MAX9924
VR SENSOR DIFFERENTIAL AMPLIFIER ADAPTIVE/MINIMUM AND ZERO-CROSSING THRESHOLDS INTERNAL/EXTERNAL BIAS VOLTAGE
Features Differential input stage for new-generation VR sensors Internal adaptive threshold arm available Externally configurable threshold arm level possible Precision amplifier and comparator allow smallsignal detection Zero-crossing detection provides accurate phase information -40C to +125C automotive temperature range Single/dual versions available in 10-pin MAX/ 16-pin QSOP packages 14
Applications Crank-shaft sensors Cam-shaft sensors Turbine-shaft speed sensors Vehicle speed sensors
High-accuracy current-sense amps provide high performance in automotive motor and solenoid applications
Bidirectional current-sense amps have wide -20V to +75V VCM range
The MAX9918*/MAX9919*/MAX9920* are the industrys highest accuracy, bidirectional current-sense amps. These robust devices offer a very wide, -20V to +75V input common-mode range, and can withstand reverse-battery conditions and load-dump transients. They are ideal for current sensing in automotive applications such as electric power steering (EPS) systems or automatic transmission systems.
1 RSENSE M
2 RS+
MAX9918* MAX9920*
INPUT-STAGE LEVEL SHIFTER RS-
REFIN
1 SHDN GND
ADJUSTABLE GAIN
Features -20V to +75V VCM range Low 400V (max) VOS 0.4% (max) gain accuracy Uni-/bidirectional current sensing 900A supply current 1A shutdown Rail-to-rail output -40C to +125C automotive temperature range
Applications H-bridge motor-current sensing in electric power steering Super-cap charging for hybrid cars Solenoid current sensing in automatic transmissions Smart fuse boxes Seat heaters
15
RSB
VCC
LOAD
MAX9922 MAX9923
RS-
OUT
ADC
FB
RS+
REF
REF
CMOS input-bias currents allow flexible R-C filter design with no errors High 1.9V to 28V common-mode voltage allows high-side sensing, even with 3.3V supply
SHDN
GND
Shutdown pin and power-down modes draw just 1A for power-sensitive batteryoperated applications
Features Ultra-precision VOS over temperature 0.5% (max) full-scale gain accuracy Bidirectional or unidirectional ISENSE Multiple gain options available 1.9V to 28V VCM 2.85V to 5.5V supply voltage 16
Applications Notebook/desktop power management Handheld Li+ battery current monitoring Precision current sources
MCU
MAX9928 MAX9929
SIGN
DIN
AIN
ADC
Pin compatible with MAX4372; only 1mm x 1.5mm UCSP packagelike 0603 resistor!
Current output provides immunity from ground-bounce by enabling local termination near ADC
The tiny MAX9937 current-sense amp is extremely versatile and robust, making it ideal for a large number of automotive ECU and car battery current-monitoring applications. It is available in a small 2mm x 2mm SC70 package, consumes just 20A of supply current, and can withstand 40V load-dump spikes for 1s and reverse-battery conditions continuously.
Features Multiple resistor programmable gain options Can use input and output filters for EMC robustness and reliability Reverse-battery protection (MAX9937) Bidirectional operation (MAX9928/MAX9929)
Applications Automotive battery and ECU current-sensing (MAX9937) Power converters for automotive automatic startstop engines (MAX9937) Portable consumer devices (MAX9928/MAX9929)
www.maxim-ic.com/CurrentSenseAmps
17
VCM
CSA
VCC
LOAD
VOUT Differential amplifier VOUT = G x VSENSE Gain error (GE) affects the full-scale measurement The VOL (output voltage low) specification indicates that the output does not really decrease to zero, even for VSENSE = 0 and VOS = 0.
ADC
Effect of VOS
VOUT VOUT
Effect of GE
VOUT
Effect of VOL
VOS affects the measurement of the low current range. It is important to have low VOS, so as to reduce the size of the sense resistor. Low VOS also increases the dynamic range of current measurement. Gain error affects this measurement in the higher current ranges and at full-scale. Sense resistor tolerance affects the total error of the measurement, and total error is given by the combination of VOS, GE, and RSENSE tolerance as per the equations below: VOUT = (G |GE|) x (VSENSE |VOS|) VSENSE = ILOAD x RSENSE
18
Im OOK. Youre OOK? www.maxim-ic.com/AN4439 Autozero Noise Filtering Improves Instrumentation Amplifier Output www.maxim-ic.com/AN4440 Zero-Drift IA Takes the Strain Out of Sensor Measurements www.maxim-ic.com/AN4437 A Fully Integrated, Robust Solution for Interfacing with Hall-Effect Sensors www.maxim-ic.com/AN4220 Precision Instrumentation Amplifiers with Rejustors Solve High-Gain Applications www.maxim-ic.com/AN4321 Keep Power Consumption in Check with Low-Power Comparators that Autosense Plugged-In Accessories www.maxim-ic.com/AN4327 19
www.maxim-ic.com/amps-sensors
Input CMVR (V) (VEE - 0.2) to (VCC - 0.9) VSS to VDD (VSS - 0.1) to (VDD + 0.1) VEE to VCC VSS to (VDD - 1.4) VSS to (VDD - 1.3) VSS to (VDD - 1.3) VEE to VCC (VEE - 0.2) to (VCC - 1.5) Input Voltage Smallest Noise Available (nV/Hz) Packages 66 12 52 70 36 100 29 12 8 SC70/SOT23/ TSSOP SC70/SOT23/ UCSP/TSSOP SC70/SOT23 UCSP/TSSOP SC70/SOT23/ TSSOP SC70/SOT23/ TSSOP SC70/SOT23/ TSSOP SC70/SOT23/ TSSOP SC70/SOT23/ TSSOP
*All devices operate in the -40C to +125C automotive temperature range, except the MAX4291/MAX4292/MAX4294, which operate in the -40C to +85C extended temperature range.
Instrumentation amplifiers
Part MAX4208/09 MAX4460/61/62 MAX419497 Supply Voltage (V) 2.85 to 5.5 2.85 to 5.25 2.7 to 7.5 Rail-toRail Output Output Output Input CMRR (V) (VSS - 0.1) to (VDD - 1.3) (VSS - 0.1) to (VDD - 1.7) (VEE - 0.2) to (VCC - 1.1) Supply Current per Op Amp (A, typ) 750 680 93 VOS (V, max) 20 425 450 Gain Error (%, max) 0.25 0.35 0.01 Unity GBW (kHz) 750 2500 250 Temp Range (C) -40 to +125 -40 to +85 -40 to +85 Package 8-MAX 6-TDFN, 6-SOT23, 8-SO 8-SO
Package 10-MAX
20
Operational amplifiers
Low voltage, low power
Part MAX4464/70/71/72/74 MAX403639 MAX991013 MAX991417 MAX4289 Op Amps per Package 1, 2, 4 1, 2 1, 2 1, 2 1 Rail-to-Rail Output Output Output, input Output, input Output Supply Voltage (V) 1.8 to 5.5 1.4 to 3.6 1.8 to 5.5 1.8 to 5.5 1.0 to 5.5 Supply Current per Op Amp (A, typ) 0.75 0.8 4 20 9 Input Bias Current (nA, max) 1.5 0.01 0.01 0.01 15 Unity GBW (kHz) 9/40* 4 200 1000 17
www.maxim-ic.com/amps-sensors
-40 to +85/+125** 5-SC70, 6-SOT23, 8-/10-TDFN, 9-UCSP, 8-/10-MAX -40 to +85 -40 to +85 -40 to +85 5-/6-SC70, 8-SOT23, 10-MAX 5-/6-SC70, 8-SOT23, 10-MAX 6-SOT23, 8-SO
*Unity-gain stable versions have GBW of 9kHz. Decompensated versions provide GBW of 40kHz with a minimum stable gain of 5V/V. **MAX4036/MAX4038 are available in A grade versions that operate from -40C to +125C.
High precision
Part MAX4236/37 MAX4238/39 Op Amps per Package 1 1 Rail-toRail Output Output Supply Voltage (V) 2.4 to 5.5 2.7 to 5.5 Supply Current per Op Amp (A, typ) 350 600 VOS VOS Drift (V, max) (V/C) 20 2 0.6 0.01 Input Bias Current (nA, max) 0.5 0.001 (typ) Unity GBW (MHz) 1.7/7.5* 1/6.5** Temp Range (C) -40 to +85 -40 to +125 Package 6-SOT23, 8-MAX, 8-SO 6-SOT23, 6-TDFN, 8-SO
*Unity-gain stable versions have GBW of 1.7MHz. Decompensated versions provide GBW of 7.5MHz with a minimum stable gain of 5V/V. **Unity-gain stable versions have GBW of 1MHz. Decompensated versions provide GBW of 6.5MHz with a minimum stable gain of 10V/V.
Low noise
Part MAX424957 Op Amps per Rail-toPackage Rail 1, 2, 4 Output Output Supply Voltage (V) 2.4 to 5.5 2.7 to 5.5 Supply Current per Op Amp (A, typ) 420 2500 Input Bias Current (nA, max) 0.1 0.15 150 Unity GBW (MHz) 3/22* 10/42** 28 Slew Rate (V/s) 0.3/2.1* 3/10** 4.5 Input Voltage Noise at 1kHz (nV/Hz) 8.9 4.5 1.5 Package 5-SOT23, 8-/10-MAX, 8-/10-UCSP, 8-/14-SO 6-SOT23, 8-MAX, 6-TDFN, 8-/14-SO, 14-TSSOP 8-/14-DIP, 8-/14-SO, 8-TDFN
MAX447578/88/89 1, 2, 4 MAX410/12/14 1, 2, 4
*Unity-gain stable versions of MAX4249MAX4257 have GBW of 3MHz. Decompensated versions provide GBW of 22MHz with a minimum stable gain of 10V/V. **Unity-gain stable versions of MAX4475MAX4478/MAX4488/MAX4489 have GBW of 10MHz. Decompensated versions provide GBW of 42kHz with a minimum stable gain of 10V/V.
High voltage
Part MAX9943/44 Op Amps per Package 1, 2 Supply Voltage (V) 6 to 38 Supply Current per Op Amp (A, typ) 550 Unity GBW (MHz) 2.4 VOS (V, max) 100 VOS Drift (V/C) 0.4 Input Input Voltage Bias Current Noise at 10kHz (nA, max) (nV/Hz) Temp Range (C) -40 to +125 Package 6-TDFN/ 8-MAX, 8-TDFN/SO 6-TDFN 8-MAX
MAX9945
4.75 to 38
400
5000
0.05
15
-40 to +125
21
www.maxim-ic.com/amps-sensors
Part MAX9938 MAX9937 MAX4073 MAX4173 MAX4372 MAX4376/ 77/78 MAX4373/ 74/75 MAX4172
Features Ultra small, low power Automotive grade Ultra small Wide common-mode range Low power Single/dual/quad Integrated comparator(s) + reference, low power Precision, current output
Gain 25V/V, 50V/V, 100V/V 20V/V 20V/V, 50V/V, 100V/V 20V/V, 50V/V, 100V/V 20V/V, 50V/V, 100V/V 20V/V, 50V/V, 100V/V 20V/V, 50V/V, 100V/V 10mA/V
Bandwidth (kHz) 125 350 1700 1400 200 1700 120 800
Temp Range (C) -40 to +85 -40 to +125 -40 to +125 -40 to +85 -40 to +85 -40 to +125 -40 to +85 -40 to +85
Smallest Available Package(s) UCSP SC70 SC70 SOT23 UCSP SOT23/MAX/ TSSOP MAX MAX
Bidirectional
Input Voltage (V) 1.9 to 28 Supply Current (A) 700 20 100 VOS at +25C (V, max) 10 400 250 Gain Accuracy at +25C (%, max) Bandwidth (kHz) 50 150 100 Temp Range (C) -40 to +85 Smallest Available Package MAX
Gain
Adj, 25V/V, 100V/V, 0.5 250V/V Adj, 20V/V, 50V/V 50V/V, 100V/V 1 1
SIGN output, current output -0.1 to +28 Integrated reference, precision 1.35 to 24
High voltage
Input Voltage (V) Supply Current (A) 900 75/100 VOS at +25C (V, max) 400 600 Gain Accuracy at +25C (%, max) 0.4 0.6 Bandwidth (kHz) 250 250 Temp Range (C) -40 to +125 -40 to +125 Smallest Available Package SO MAX
Part
Features
Power sense
Input Voltage (V) 4 to 28 4 to 28 Supply Current (A) 670 670 VOS at +25C (V, max) Gain Accuracy at +25C (%, max) 1.5 1.5 Bandwidth (kHz) 220 220 Temp Range (C) -40 to +85 -40 to +85 Smallest Available Package TDFN TQFN
22
Comparators
High speed
Part MAX9600/01 MAX999 MAX9010 MAX9203 MAX9109 MAX9140 Propagation Supply Comparators Delay Rail-toVoltage per Package (ns, typ) Rail Input (V) 2 1 1 1 1 1 0.5 4.5 5 7 25 40 5 2.7 to 5.5 4.5 to 5.5 5 to 10, 5 4.5 to 5.5 2.7 to 5.5 Supply Current per Comp VOS (A, typ) (mV, typ) 12,000 5000 900 1300 350 165 1 0.5 1 1 0.5 0.5
www.maxim-ic.com/amps-sensors
VOS Logic (mV, max) Output 5 1.5 5 4 1.6 2 ECL/PECL CMOS, TTL TTL TTL TTL TTL/CMOS
Temp Range (C) -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85
Package 20-TSSOP 5-SOT23 6-SC70 8-SOT23, 8-SO 6-SC70, 6-SOT23, 8-SO 5-SC70, 5-SOT23
General purpose
Comparators per Package 1 2 1 2 4 Propagation Supply Delay Voltage (ns, typ) (V) 100 580 3000 3000 3000 1.8 to 5.5 2.1 to 5.5 2.5 to 5.5 2.5 to 5.5 2.5 to 5.5 Supply Current per Comp VOS VOS (A, typ) (mV, typ) (mV, max) 60 3 2.8 2.8 2.8 0.2 1 1 1 1 7 8 8 8 8 Logic Output Open drain CMOS, TTL TTL/CMOS TTL/CMOS TTL/CMOS Temp Range (C) -40 to +125 -40 to +85 -40 to +125 -40 to +125 -40 to +125
Package 5-SOT23, 5-SC70 8-SOT23, 8-MAX, 8-SO 5-SOT23, 5-SC70 8-SO, 8-MAX, 8-SOT23 14-TSSOP, 14-SO
Low voltage
Part Propagation Comparators Delay Rail-toper Package (ns, typ) Rail Input 25,000 15,000 3700 3700 30,000 30,000 40,000 45,000 40,000 45,000 Supply Voltage (V) 1 to 5.5 1 to 5.5 1.0 to 5.5 1.0 to 5.5 1.8 to 5.5 1.8 to 5.5 1.8 to 5.5 1.8 to 5.5 1.8 to 5.5 1.8 to 5.5 Supply Current per Comp VOS (A, typ) (mV, typ) 1 1 6 6 0.07 0.07 1 1 0.68 0.68 1.3 3 3 0.15 0.15 0.3 0.3 1 1 VOS Logic (mV, max) Output 6 10 10 5 5 5 5 5 5 Temp Range (C) Package 4-UCSP/ 5-SOT23 4-UCSP/ 5-SOT23 5-SOT23, 8-SO 5-SOT23, 8-SO 8-SOT23 8-SOT23 6-UCSP 6-UCSP 5-SC70 5-SC70
MAX906064 1 MAX9065 MAX9100 MAX9101 MAX9017/19 MAX9018/20 MAX9027 MAX9028 MAX9117/19 MAX9118/20 2 1 1 2 2 1 1 1 1
Open-drain/ -40 to +85 push-pull Push-pull CMOS Open drain CMOS Open drain CMOS Open drain CMOS Open drain -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85
23
16
www.maxim-ic.com/yes
Amps/Sensors-1 US 4/09
www.maxim-ic.com
TM
Maxim Integrated Products, Inc. 120 San Gabriel Drive Sunnyvale, CA 94086
Innovation Delivered is a trademark and 1-Wire and iButton are registered trademarks of Maxim Integrated Products, Inc.