Академический Документы
Профессиональный Документы
Культура Документы
Periodical Test I / II
Semester & Branch: II / M.E. (ED/CAD/CAM) Subject: Design of Material Handling Equipments Subject Code: 10ED53/10CC67 PART A ANSWER ALL THE QUESTIONS
Date: 20/03/2012(AN2) Max. Marks: 10 Marks Max. Time: 15 min (10 X 1 = 10 Marks)
(Choose the best answer & Fill in the blanks) (Instruction to the candidate: The student should answer PART A Questions within the first 15 minutes and handover the same to the invigilator.) Write the correct choice / answers in the respective boxes
1/2 hour rated motors are used for (A) light duty cranes (B) medium duty cranes (C) heavy duty cranes (D) none of the above For handing fragile articles in a crane (A) low speed is preferred (B) medium speed is preferred (C) high speed is preferred. (D) None of the above Motors preferred for rolling mill drive is (A) dc motors (B) ac slip ring motors with speed control
ANS:
ANS:
ANS:
From No.
Rev.No.
Effective Date:
(C) any of the above (D) none of the above. The .......motors, because of their inherent characteristics, are best suited for the rolling mills (A) dc motors (B) slip ring induction motors (C) squirrel cage induction motors (D) single phase motors. The capacity of a crane is expressed in terms of (A) Span (B) Type of drive (C) Tonnes (D) Any of the above. The traveling speed of cranes varies from (A) 1 to 2.5 m/s (B) 5 to 15 m/s (C) 20 to 22.5 m/s (D) 25 to 40 m/s. In overhead traveling cranes (A) continuous duty motors are used (B) slow speed motors are preferred (C) short time rated motors arc preferred (D) none of the above.
ANS:
ANS:
ANS:
ANS:
15 minute rated motors are suitable for (A) light duty cranes (B) medium duty cranes (C) heavy duty cranes
ANS:
From No.
Rev.No.
Effective Date:
(D) all of the above. Light duty cranes are generally used in (A) automobile workshops (B) pumping stations
ANS:
(C) power houses (D) All of the above Heavy duty cranes are used in (A) Heavy engineering workshops (B) Steel plants (C) Ore handling plants (D) All of the above. Number of Corrections made by the student if any:
10
ANS:
Prepared by
Verified by
Approved by
Uvaraja V C AP/Mech
Dr.K.SivaKumar Hod/Mech
From No.
Rev.No.
Effective Date:
Register Number:
Periodical Test I / II
Semester & Branch: II / M.E. (ED/CAD/CAM) Subject: Design of Material Handling Equipments Subject Code: 10ED53/10CC67 PART A ANSWER ALL THE QUESTIONS
Date: 20/03/2012(AN2) Max. Marks: 10 Marks Max. Time: 15 min (10 X 1 = 10 Marks)
(Choose the best answer & Fill in the blanks) (Instruction to the candidate: The student should answer PART A Questions within the first 15 minutes and handover the same to the invigilator.) Write the correct choice / answers in the respective boxes
15 minute rated motors are suitable for (A) light duty cranes (B) medium duty cranes (C) heavy duty cranes (D) all of the above. Light duty cranes are generally used in (A) automobile workshops (B) pumping stations
ANS:
ANS:
(C) power houses (D) All of the above Heavy duty cranes are used in Rev.No. Effective Date:
ANS:
From No.
(A) Heavy engineering workshops (B) Steel plants (C) Ore handling plants (D) All of the above. The capacity of a crane is expressed in terms of (A) Span (B) Type of drive (C) Tonnes (D) Any of the above. The traveling speed of cranes varies from (A) 1 to 2.5 m/s (B) 5 to 15 m/s (C) 20 to 22.5 m/s (D) 25 to 40 m/s. In overhead traveling cranes (A) continuous duty motors are used (B) slow speed motors are preferred (C) short time rated motors arc preferred (D) none of the above.
ANS:
ANS:
ANS:
1/2 hour rated motors are used for (A) light duty cranes (B) medium duty cranes (C) heavy duty cranes (D) none of the above For handing fragile articles in a crane (A) low speed is preferred
ANS:
ANS:
From No.
Rev.No.
Effective Date:
(B) medium speed is preferred (C) high speed is preferred. (D) None of the above Motors preferred for rolling mill drive is (A) dc motors (B) ac slip ring motors with speed control (C) any of the above (D) none of the above. The .......motors, because of their inherent characteristics, are best suited for the rolling mills (A) dc motors (B) slip ring induction motors (C) squirrel cage induction motors (D) single phase motors. Number of Corrections made by the student if any:
ANS:
10
ANS:
Prepared by
Verified by
Approved by
Uvaraja V C AP/Mech
Dr.K.SivaKumar Hod/Mech
From No.
Rev.No.
Effective Date:
Register Number:
Periodical Test I / II
Semester & Branch: II / M.E. (ED/CAD/CAM) Subject: Design of Material Handling Equipments Subject Code: 10ED53/10CC67 PART A ANSWER ALL THE QUESTIONS
Date: 20/03/2012(AN2) Max. Marks: 10 Marks Max. Time: 15 min (10 X 1 = 10 Marks)
(Choose the best answer & Fill in the blanks) (Instruction to the candidate: The student should answer PART A Questions within the first 15 minutes and handover the same to the invigilator.) Write the correct choice / answers in the respective boxes
Motors preferred for rolling mill drive is (A) dc motors (B) ac slip ring motors with speed control (C) any of the above (D) none of the above. The .......motors, because of their inherent characteristics, are best suited for the rolling mills (A) dc motors (B) slip ring induction motors (C) squirrel cage induction motors (D) single phase motors.
ANS:
ANS:
From No.
Rev.No.
Effective Date:
15 minute rated motors are suitable for (A) light duty cranes (B) medium duty cranes (C) heavy duty cranes (D) all of the above. Light duty cranes are generally used in (A) automobile workshops (B) pumping stations
ANS:
ANS:
(C) power houses (D) All of the above Heavy duty cranes are used in (A) Heavy engineering workshops (B) Steel plants (C) Ore handling plants (D) All of the above. The traveling speed of cranes varies from (A) 1 to 2.5 m/s (B) 5 to 15 m/s (C) 20 to 22.5 m/s (D) 25 to 40 m/s. In overhead traveling cranes (A) continuous duty motors are used (B) slow speed motors are preferred (C) short time rated motors arc preferred (D) none of the above.
ANS:
ANS:
ANS:
From No.
Rev.No.
Effective Date:
1/2 hour rated motors are used for (A) light duty cranes (B) medium duty cranes (C) heavy duty cranes (D) none of the above The capacity of a crane is expressed in terms of (A) Span (B) Type of drive (C) Tonnes (D) Any of the above. For handing fragile articles in a crane (A) low speed is preferred (B) medium speed is preferred (C) high speed is preferred. (D) None of the above
ANS:
ANS:
10
ANS:
Prepared by
Verified by
Approved by
Uvaraja V C AP/Mech
Dr.K.SivaKumar Hod/Mech
From No.
Rev.No.
Effective Date:
Register Number:
Periodical Test I / II
Semester & Branch: II / M.E. (ED/CAD/CAM) Subject: Design of Material Handling Equipments Subject Code: 10ED53/10CC67 PART A ANSWER ALL THE QUESTIONS
Date: 20/03/2012(AN2) Max. Marks: 10 Marks Max. Time: 15 min (10 X 1 = 10 Marks)
(Choose the best answer & Fill in the blanks) (Instruction to the candidate: The student should answer PART A Questions within the first 15 minutes and handover the same to the invigilator.) Write the correct choice / answers in the respective boxes
The capacity of a crane is expressed in terms of (A) Span (B) Type of drive (C) Tonnes (D) Any of the above. For handing fragile articles in a crane (A) low speed is preferred (B) medium speed is preferred (C) high speed is preferred.
ANS:
ANS:
From No.
Rev.No.
Effective Date:
(D) None of the above Motors preferred for rolling mill drive is (A) dc motors (B) ac slip ring motors with speed control (C) any of the above (D) none of the above. The .......motors, because of their inherent characteristics, are best suited for the rolling mills (A) dc motors (B) slip ring induction motors (C) squirrel cage induction motors (D) single phase motors. The traveling speed of cranes varies from (A) 1 to 2.5 m/s (B) 5 to 15 m/s (C) 20 to 22.5 m/s (D) 25 to 40 m/s. In overhead traveling cranes (A) continuous duty motors are used (B) slow speed motors are preferred (C) short time rated motors arc preferred (D) none of the above.
ANS:
ANS:
ANS:
ANS:
1/2 hour rated motors are used for (A) light duty cranes (B) medium duty cranes (C) heavy duty cranes
ANS:
From No.
Rev.No.
Effective Date:
(D) none of the above 15 minute rated motors are suitable for (A) light duty cranes (B) medium duty cranes (C) heavy duty cranes (D) all of the above. Light duty cranes are generally used in (A) automobile workshops (B) pumping stations
ANS:
ANS:
(C) power houses (D) All of the above Heavy duty cranes are used in (A) Heavy engineering workshops (B) Steel plants (C) Ore handling plants (D) All of the above. Number of Corrections made by the student if any:
10
ANS:
Prepared by
Verified by
Approved by
Uvaraja V C AP/Mech
Dr.K.SivaKumar Hod/Mech
From No.
Rev.No.
Effective Date:
Register Number:
Periodical Test I / II
Semester & Branch: II / M.E. (ED/CAD/CAM) Subject: Design of Material Handling Equipments Subject Code: 10ED53/10CC67 PART A ANSWER ALL THE QUESTIONS
Date: 20/03/2012(AN2) Max. Marks: 10 Marks Max. Time: 15 min (10 X 1 = 10 Marks)
(Choose the best answer & Fill in the blanks) (Instruction to the candidate: The student should answer PART A Questions within the first 15 minutes and handover the same to the invigilator.) Write the correct choice / answers in the respective boxes
15 minute rated motors are suitable for (A) light duty cranes (B) medium duty cranes (C) heavy duty cranes (D) all of the above. Light duty cranes are generally used in (A) automobile workshops (B) pumping stations
ANS:
ANS:
(C) power houses (D) All of the above Heavy duty cranes are used in (A) Heavy engineering workshops From No. Rev.No. Effective Date:
ANS:
(B) Steel plants (C) Ore handling plants (D) All of the above. 1/2 hour rated motors are used for (A) light duty cranes (B) medium duty cranes (C) heavy duty cranes (D) none of the above For handing fragile articles in a crane (A) low speed is preferred (B) medium speed is preferred (C) high speed is preferred. (D) None of the above Motors preferred for rolling mill drive is (A) dc motors (B) ac slip ring motors with speed control (C) any of the above (D) none of the above. The .......motors, because of their inherent characteristics, are best suited for the rolling mills (A) dc motors (B) slip ring induction motors (C) squirrel cage induction motors (D) single phase motors. The capacity of a crane is expressed in terms of (A) Span (B) Type of drive (C) Tonnes From No. Rev.No. Effective Date:
ANS:
ANS:
ANS:
ANS:
ANS:
(D) Any of the above. The traveling speed of cranes varies from (A) 1 to 2.5 m/s (B) 5 to 15 m/s (C) 20 to 22.5 m/s (D) 25 to 40 m/s. In overhead traveling cranes (A) continuous duty motors are used (B) slow speed motors are preferred (C) short time rated motors arc preferred (D) none of the above.
ANS:
10
ANS:
Prepared by
Verified by
Approved by
Uvaraja V C AP/Mech
Dr.K.SivaKumar Hod/Mech
From No.
Rev.No.
Effective Date:
Register Number:
Periodical Test I / II
Semester & Branch: II / M.E. (ED/CAD/CAM) Subject: Design of Material Handling Equipments Subject Code: 10ED53/10CC67 PART A ANSWER ALL THE QUESTIONS
Date: 20/03/2012(AN2) Max. Marks: 10 Marks Max. Time: 15 min (10 X 1 = 10 Marks)
(Choose the best answer & Fill in the blanks) (Instruction to the candidate: The student should answer PART A Questions within the first 15 minutes and handover the same to the invigilator.) Write the correct choice / answers in the respective boxes
The capacity of a crane is expressed in terms of (A) Span (B) Type of drive (C) Tonnes (D) Any of the above. The traveling speed of cranes varies from (A) 1 to 2.5 m/s (B) 5 to 15 m/s (C) 20 to 22.5 m/s (D) 25 to 40 m/s. In overhead traveling cranes (A) continuous duty motors are used (B) slow speed motors are preferred
ANS:
ANS:
ANS:
From No.
Rev.No.
Effective Date:
(C) short time rated motors arc preferred (D) none of the above.
15 minute rated motors are suitable for (A) light duty cranes (B) medium duty cranes (C) heavy duty cranes (D) all of the above. Light duty cranes are generally used in (A) automobile workshops (B) pumping stations
ANS:
ANS:
(C) power houses (D) All of the above Heavy duty cranes are used in (A) Heavy engineering workshops (B) Steel plants (C) Ore handling plants (D) All of the above. 1/2 hour rated motors are used for (A) light duty cranes (B) medium duty cranes (C) heavy duty cranes (D) none of the above For handing fragile articles in a crane (A) low speed is preferred (B) medium speed is preferred (C) high speed is preferred. From No. Rev.No. Effective Date:
ANS:
ANS:
ANS:
(D) None of the above Motors preferred for rolling mill drive is (A) dc motors (B) ac slip ring motors with speed control (C) any of the above (D) none of the above. The .......motors, because of their inherent characteristics, are best suited for the rolling mills (A) dc motors (B) slip ring induction motors (C) squirrel cage induction motors (D) single phase motors.
ANS:
10
ANS:
Prepared by
Verified by
Approved by
Uvaraja V C AP/Mech
Dr.K.SivaKumar Hod/Mech
From No.
Rev.No.
Effective Date:
Register Number:
Periodical Test I / II
Semester & Branch: II / M.E. (ED/CAD/CAM) Subject: Design of Material Handling Equipments Subject Code: 10ED53/10CC67 PART A ANSWER ALL THE QUESTIONS
Date: 20/03/2012(AN2) Max. Marks: 10 Marks Max. Time: 15 min (10 X 1 = 10 Marks)
(Choose the best answer & Fill in the blanks) (Instruction to the candidate: The student should answer PART A Questions within the first 15 minutes and handover the same to the invigilator.) Write the correct choice / answers in the respective boxes
1/2 hour rated motors are used for (A) light duty cranes (B) medium duty cranes (C) heavy duty cranes (D) none of the above For handing fragile articles in a crane (A) low speed is preferred (B) medium speed is preferred (C) high speed is preferred. (D) None of the above Motors preferred for rolling mill drive is (A) dc motors
ANS:
ANS:
ANS:
From No.
Rev.No.
Effective Date:
(B) ac slip ring motors with speed control (C) any of the above (D) none of the above. The .......motors, because of their inherent characteristics, are best suited for the rolling mills (A) dc motors (B) slip ring induction motors (C) squirrel cage induction motors (D) single phase motors. The capacity of a crane is expressed in terms of (A) Span (B) Type of drive (C) Tonnes (D) Any of the above. The traveling speed of cranes varies from (A) 1 to 2.5 m/s (B) 5 to 15 m/s (C) 20 to 22.5 m/s (D) 25 to 40 m/s. In overhead traveling cranes (A) continuous duty motors are used (B) slow speed motors are preferred (C) short time rated motors arc preferred (D) none of the above.
ANS:
ANS:
ANS:
ANS:
15 minute rated motors are suitable for (A) light duty cranes (B) medium duty cranes
ANS:
From No.
Rev.No.
Effective Date:
(C) heavy duty cranes (D) all of the above. Light duty cranes are generally used in (A) automobile workshops (B) pumping stations
ANS:
(C) power houses (D) All of the above Heavy duty cranes are used in (A) Heavy engineering workshops (B) Steel plants (C) Ore handling plants (D) All of the above. Number of Corrections made by the student if any:
10
ANS:
Prepared by
Verified by
Approved by
Uvaraja V C AP/Mech
Dr.K.SivaKumar Hod/Mech
From No.
Rev.No.
Effective Date:
Register Number:
Periodical Test I / II
Semester & Branch: II / M.E. (ED/CAD/CAM) Subject: Design of Material Handling Equipments Subject Code: 10ED53/10CC67
PART A ANSWER ALL THE QUESTIONS (Choose the best answer & Fill in the blanks)
(10 X 1 = 10 Marks)
(Instruction to the candidate: The student should answer PART A Questions within the first 15 minutes and handover the same to the invigilator.) Write the correct choice / answers in the respective boxes
Heavy duty cranes are used in (A) Heavy engineering workshops (B) Steel plants (C) Ore handling plants (D) All of the above. 1/2 hour rated motors are used for (A) light duty cranes (B) medium duty cranes (C) heavy duty cranes (D) none of the above For handing fragile articles in a crane Rev.No. Effective Date:
ANS:
ANS:
ANS:
From No.
(A) low speed is preferred (B) medium speed is preferred (C) high speed is preferred. (D) None of the above Motors preferred for rolling mill drive is (A) dc motors (B) ac slip ring motors with speed control (C) any of the above (D) none of the above. The .......motors, because of their inherent characteristics, are best suited for the rolling mills (A) dc motors (B) slip ring induction motors (C) squirrel cage induction motors (D) single phase motors. The capacity of a crane is expressed in terms of (A) Span (B) Type of drive (C) Tonnes (D) Any of the above. The traveling speed of cranes varies from (A) 1 to 2.5 m/s (B) 5 to 15 m/s (C) 20 to 22.5 m/s (D) 25 to 40 m/s. In overhead traveling cranes (A) continuous duty motors are used (B) slow speed motors are preferred From No. Rev.No. Effective Date:
ANS:
ANS:
ANS:
ANS:
ANS:
(C) short time rated motors arc preferred (D) none of the above.
15 minute rated motors are suitable for (A) light duty cranes (B) medium duty cranes (C) heavy duty cranes (D) all of the above. Light duty cranes are generally used in (A) automobile workshops (B) pumping stations
ANS:
10
ANS:
(C) power houses (D) All of the above Number of Corrections made by the student if any:
Prepared by
Verified by
Approved by
Uvaraja V C AP/Mech
Dr.K.SivaKumar Hod/Mech
From No.
Rev.No.
Effective Date:
Register Number:
Periodical Test I / II
Semester & Branch: II / M.E. (ED/CAD/CAM) Subject: Design of Material Handling Equipments Subject Code: 10ED53/10CC67 PART A ANSWER ALL THE QUESTIONS
Date: 20/03/2012(AN2) Max. Marks: 10 Marks Max. Time: 15 min (10 X 1 = 10 Marks)
(Choose the best answer & Fill in the blanks) (Instruction to the candidate: The student should answer PART A Questions within the first 15 minutes and handover the same to the invigilator.) Write the correct choice / answers in the respective boxes
The .......motors, because of their inherent characteristics, are best suited for the rolling mills (A) dc motors (B) slip ring induction motors (C) squirrel cage induction motors (D) single phase motors. 15 minute rated motors are suitable for (A) light duty cranes (B) medium duty cranes (C) heavy duty cranes (D) all of the above. Light duty cranes are generally used in (A) automobile workshops
ANS:
ANS:
ANS:
From No.
Rev.No.
Effective Date:
(C) power houses (D) All of the above 1/2 hour rated motors are used for (A) light duty cranes (B) medium duty cranes (C) heavy duty cranes (D) none of the above The traveling speed of cranes varies from (A) 1 to 2.5 m/s (B) 5 to 15 m/s (C) 20 to 22.5 m/s (D) 25 to 40 m/s. In overhead traveling cranes (A) continuous duty motors are used (B) slow speed motors are preferred (C) short time rated motors arc preferred (D) none of the above.
ANS:
ANS:
ANS:
Motors preferred for rolling mill drive is (A) dc motors (B) ac slip ring motors with speed control (C) any of the above (D) none of the above. The capacity of a crane is expressed in terms of (A) Span (B) Type of drive
ANS:
ANS:
From No.
Rev.No.
Effective Date:
(C) Tonnes (D) Any of the above. For handing fragile articles in a crane (A) low speed is preferred (B) medium speed is preferred (C) high speed is preferred. (D) None of the above Heavy duty cranes are used in (A) Heavy engineering workshops (B) Steel plants (C) Ore handling plants (D) All of the above. Number of Corrections made by the student if any:
ANS:
10
ANS:
Prepared by
Verified by
Approved by
Uvaraja V C AP/Mech
Dr.K.SivaKumar Hod/Mech
From No.
Rev.No.
Effective Date:
Register Number:
Periodical Test I / II
Semester & Branch: II / M.E. (ED/CAD/CAM) Subject: Design of Material Handling Equipments Subject Code: 10ED53/10CC67 PART A ANSWER ALL THE QUESTIONS
Date: 20/03/2012(AN2) Max. Marks: 10 Marks Max. Time: 15 min (10 X 1 = 10 Marks)
(Choose the best answer & Fill in the blanks) (Instruction to the candidate: The student should answer PART A Questions within the first 15 minutes and handover the same to the invigilator.) Write the correct choice / answers in the respective boxes
The .......motors, because of their inherent characteristics, are best suited for the rolling mills (A) dc motors (B) slip ring induction motors (C) squirrel cage induction motors (D) single phase motors. 15 minute rated motors are suitable for (A) light duty cranes (B) medium duty cranes (C) heavy duty cranes (D) all of the above. Light duty cranes are generally used in (A) automobile workshops
ANS:
ANS:
ANS:
From No.
Rev.No.
Effective Date:
(C) power houses (D) All of the above 1/2 hour rated motors are used for (A) light duty cranes (B) medium duty cranes (C) heavy duty cranes (D) none of the above The capacity of a crane is expressed in terms of (A) Span (B) Type of drive (C) Tonnes (D) Any of the above. For handing fragile articles in a crane (A) low speed is preferred (B) medium speed is preferred (C) high speed is preferred. (D) None of the above Heavy duty cranes are used in (A) Heavy engineering workshops (B) Steel plants (C) Ore handling plants (D) All of the above. The traveling speed of cranes varies from (A) 1 to 2.5 m/s (B) 5 to 15 m/s (C) 20 to 22.5 m/s From No. Rev.No. Effective Date:
ANS:
ANS:
ANS:
ANS:
ANS:
(D) 25 to 40 m/s. In overhead traveling cranes (A) continuous duty motors are used (B) slow speed motors are preferred (C) short time rated motors arc preferred (D) none of the above.
ANS:
10
Motors preferred for rolling mill drive is (A) dc motors (B) ac slip ring motors with speed control (C) any of the above (D) none of the above.
ANS:
Prepared by
Verified by
Approved by
Uvaraja V C AP/Mech
Dr.K.SivaKumar Hod/Mech
From No.
Rev.No.
Effective Date:
Register Number:
Periodical Test I / II
Semester & Branch: II / M.E. (ED/CAD/CAM) Subject: Design of Material Handling Equipments Subject Code: 10ED53/10CC67 PART A ANSWER ALL THE QUESTIONS
Date: 20/03/2012(AN2) Max. Marks: 10 Marks Max. Time: 15 min (10 X 1 = 10 Marks)
(Choose the best answer & Fill in the blanks) (Instruction to the candidate: The student should answer PART A Questions within the first 15 minutes and handover the same to the invigilator.) Write the correct choice / answers in the respective boxes
Heavy duty cranes are used in (A) Heavy engineering workshops (B) Steel plants (C) Ore handling plants (D) All of the above. 1/2 hour rated motors are used for (A) light duty cranes (B) medium duty cranes (C) heavy duty cranes (D) none of the above For handing fragile articles in a crane (A) low speed is preferred
ANS:
ANS:
ANS:
From No.
Rev.No.
Effective Date:
(B) medium speed is preferred (C) high speed is preferred. (D) None of the above Motors preferred for rolling mill drive is (A) dc motors (B) ac slip ring motors with speed control (C) any of the above (D) none of the above. The .......motors, because of their inherent characteristics, are best suited for the rolling mills (A) dc motors (B) slip ring induction motors (C) squirrel cage induction motors (D) single phase motors. The capacity of a crane is expressed in terms of (A) Span (B) Type of drive (C) Tonnes (D) Any of the above. The traveling speed of cranes varies from (A) 1 to 2.5 m/s (B) 5 to 15 m/s (C) 20 to 22.5 m/s (D) 25 to 40 m/s. In overhead traveling cranes (A) continuous duty motors are used (B) slow speed motors are preferred (C) short time rated motors arc preferred From No. Rev.No. Effective Date:
ANS:
ANS:
ANS:
ANS:
ANS:
15 minute rated motors are suitable for (A) light duty cranes (B) medium duty cranes (C) heavy duty cranes (D) all of the above. Light duty cranes are generally used in (A) automobile workshops (B) pumping stations
ANS:
10
ANS:
(C) power houses (D) All of the above Number of Corrections made by the student if any:
Prepared by
Verified by
Approved by
Uvaraja V C AP/Mech
Dr.K.SivaKumar Hod/Mech
From No.
Rev.No.
Effective Date:
Register Number:
Periodical Test I / II
Semester & Branch: II / M.E. (ED/CAD/CAM) Subject: Design of Material Handling Equipments Subject Code: 10ED53/10CC67 PART A ANSWER ALL THE QUESTIONS
Date: 20/03/2012(AN2) Max. Marks: 10 Marks Max. Time: 15 min (10 X 1 = 10 Marks)
(Choose the best answer & Fill in the blanks) (Instruction to the candidate: The student should answer PART A Questions within the first 15 minutes and handover the same to the invigilator.) Write the correct choice / answers in the respective boxes
The capacity of a crane is expressed in terms of (A) Span (B) Type of drive (C) Tonnes (D) Any of the above. The traveling speed of cranes varies from (A) 1 to 2.5 m/s (B) 5 to 15 m/s (C) 20 to 22.5 m/s (D) 25 to 40 m/s. In overhead traveling cranes (A) continuous duty motors are used
ANS:
ANS:
ANS:
From No.
Rev.No.
Effective Date:
(B) slow speed motors are preferred (C) short time rated motors arc preferred (D) none of the above.
15 minute rated motors are suitable for (A) light duty cranes (B) medium duty cranes (C) heavy duty cranes (D) all of the above. Light duty cranes are generally used in (A) automobile workshops (B) pumping stations
ANS:
ANS:
(C) power houses (D) All of the above Heavy duty cranes are used in (A) Heavy engineering workshops (B) Steel plants (C) Ore handling plants (D) All of the above. 1/2 hour rated motors are used for (A) light duty cranes (B) medium duty cranes (C) heavy duty cranes (D) none of the above For handing fragile articles in a crane (A) low speed is preferred (B) medium speed is preferred From No. Rev.No. Effective Date:
ANS:
ANS:
ANS:
(C) high speed is preferred. (D) None of the above Motors preferred for rolling mill drive is (A) dc motors (B) ac slip ring motors with speed control (C) any of the above (D) none of the above. The .......motors, because of their inherent characteristics, are best suited for the rolling mills (A) dc motors (B) slip ring induction motors (C) squirrel cage induction motors (D) single phase motors. Number of Corrections made by the student if any:
ANS:
10
ANS:
Prepared by
Verified by
Approved by
Uvaraja V C AP/Mech
Dr.K.SivaKumar Hod/Mech
From No.
Rev.No.
Effective Date:
Register Number:
Periodical Test I / II
Semester & Branch: II / M.E. (ED/CAD/CAM) Subject: Design of Material Handling Equipments Subject Code: 10ED53/10CC67 PART A ANSWER ALL THE QUESTIONS
Date: 20/03/2012(AN2) Max. Marks: 10 Marks Max. Time: 15 min (10 X 1 = 10 Marks)
(Choose the best answer & Fill in the blanks) (Instruction to the candidate: The student should answer PART A Questions within the first 15 minutes and handover the same to the invigilator.) Write the correct choice / answers in the respective boxes
Motors preferred for rolling mill drive is (A) dc motors (B) ac slip ring motors with speed control (C) any of the above (D) none of the above. The .......motors, because of their inherent characteristics, are best suited for the rolling mills (A) dc motors (B) slip ring induction motors (C) squirrel cage induction motors (D) single phase motors. The capacity of a crane is expressed in terms of (A) Span
ANS:
ANS:
ANS:
From No.
Rev.No.
Effective Date:
(B) Type of drive (C) Tonnes (D) Any of the above. The traveling speed of cranes varies from (A) 1 to 2.5 m/s (B) 5 to 15 m/s (C) 20 to 22.5 m/s (D) 25 to 40 m/s. In overhead traveling cranes (A) continuous duty motors are used (B) slow speed motors are preferred (C) short time rated motors arc preferred (D) none of the above.
ANS:
ANS:
15 minute rated motors are suitable for (A) light duty cranes (B) medium duty cranes (C) heavy duty cranes (D) all of the above. Light duty cranes are generally used in (A) automobile workshops (B) pumping stations
ANS:
ANS:
(C) power houses (D) All of the above Heavy duty cranes are used in (A) Heavy engineering workshops (B) Steel plants From No. Rev.No. Effective Date:
ANS:
(C) Ore handling plants (D) All of the above. 1/2 hour rated motors are used for (A) light duty cranes (B) medium duty cranes (C) heavy duty cranes (D) none of the above For handing fragile articles in a crane (A) low speed is preferred (B) medium speed is preferred (C) high speed is preferred. (D) None of the above Number of Corrections made by the student if any:
ANS:
10
ANS:
Prepared by
Verified by
Approved by
Uvaraja V C AP/Mech
Dr.K.SivaKumar Hod/Mech
From No.
Rev.No.
Effective Date:
Register Number:
Periodical Test I / II
Semester & Branch: II / M.E. (ED/CAD/CAM) Subject: Design of Material Handling Equipments Subject Code: 10ED53/10CC67 PART A ANSWER ALL THE QUESTIONS
Date: 20/03/2012(AN2) Max. Marks: 10 Marks Max. Time: 15 min (10 X 1 = 10 Marks)
(Choose the best answer & Fill in the blanks) (Instruction to the candidate: The student should answer PART A Questions within the first 15 minutes and handover the same to the invigilator.) Write the correct choice / answers in the respective boxes
The traveling speed of cranes varies from (A) 1 to 2.5 m/s (B) 5 to 15 m/s (C) 20 to 22.5 m/s (D) 25 to 40 m/s. In overhead traveling cranes (A) continuous duty motors are used (B) slow speed motors are preferred (C) short time rated motors arc preferred (D) none of the above.
ANS:
ANS:
15 minute rated motors are suitable for (A) light duty cranes
ANS:
From No.
Rev.No.
Effective Date:
(B) medium duty cranes (C) heavy duty cranes (D) all of the above. Light duty cranes are generally used in (A) automobile workshops (B) pumping stations
ANS:
(C) power houses (D) All of the above Heavy duty cranes are used in (A) Heavy engineering workshops (B) Steel plants (C) Ore handling plants (D) All of the above. 1/2 hour rated motors are used for (A) light duty cranes (B) medium duty cranes (C) heavy duty cranes (D) none of the above For handing fragile articles in a crane (A) low speed is preferred (B) medium speed is preferred (C) high speed is preferred. (D) None of the above Motors preferred for rolling mill drive is (A) dc motors (B) ac slip ring motors with speed control (C) any of the above From No. Rev.No. Effective Date:
ANS:
ANS:
ANS:
ANS:
(D) none of the above. The .......motors, because of their inherent characteristics, are best suited for the rolling mills (A) dc motors (B) slip ring induction motors (C) squirrel cage induction motors (D) single phase motors. The capacity of a crane is expressed in terms of (A) Span (B) Type of drive (C) Tonnes (D) Any of the above.
ANS:
10
ANS:
Prepared by
Verified by
Approved by
Uvaraja V C AP/Mech
Dr.K.SivaKumar Hod/Mech
From No.
Rev.No.
Effective Date:
Register Number:
Periodical Test I / II
Semester & Branch: II / M.E. (ED/CAD/CAM) Subject: Design of Material Handling Equipments Subject Code: 10ED53/10CC67
PART A ANSWER ALL THE QUESTIONS (Choose the best answer & Fill in the blanks)
(10 X 1 = 10 Marks)
(Instruction to the candidate: The student should answer PART A Questions within the first 15 minutes and handover the same to the invigilator.) Write the correct choice / answers in the respective boxes
The .......motors, because of their inherent characteristics, are best suited for the rolling mills (A) dc motors (B) slip ring induction motors (C) squirrel cage induction motors (D) single phase motors. The capacity of a crane is expressed in terms of (A) Span (B) Type of drive (C) Tonnes (D) Any of the above. The traveling speed of cranes varies from
ANS:
ANS:
ANS:
From No.
Rev.No.
Effective Date:
(A) 1 to 2.5 m/s (B) 5 to 15 m/s (C) 20 to 22.5 m/s (D) 25 to 40 m/s. In overhead traveling cranes (A) continuous duty motors are used (B) slow speed motors are preferred (C) short time rated motors arc preferred (D) none of the above.
ANS:
15 minute rated motors are suitable for (A) light duty cranes (B) medium duty cranes (C) heavy duty cranes (D) all of the above. Light duty cranes are generally used in (A) automobile workshops (B) pumping stations
ANS:
ANS:
(C) power houses (D) All of the above Heavy duty cranes are used in (A) Heavy engineering workshops (B) Steel plants (C) Ore handling plants (D) All of the above. 1/2 hour rated motors are used for
ANS:
ANS:
From No.
Rev.No.
Effective Date:
(A) light duty cranes (B) medium duty cranes (C) heavy duty cranes (D) none of the above For handing fragile articles in a crane (A) low speed is preferred (B) medium speed is preferred (C) high speed is preferred. (D) None of the above Motors preferred for rolling mill drive is (A) dc motors (B) ac slip ring motors with speed control (C) any of the above (D) none of the above. Number of Corrections made by the student if any:
ANS:
10
ANS:
Prepared by
Verified by
Approved by
Uvaraja V C AP/Mech
Dr.K.SivaKumar Hod/Mech
From No.
Rev.No.
Effective Date:
From No.
Rev.No.
Effective Date:
From No.
Rev.No.
Effective Date:
From No.
Rev.No.
Effective Date: