Академический Документы
Профессиональный Документы
Культура Документы
Home Live TV Life Hacks Gadgets Operating Systems Games Misc About Contact Us
2) Then run diskpart utility from command prompt, by typing diskpart on command prompt and pressing enter. This will run the diskpart utility in a separate windows, which is shown in 2nd picture below:
3) Now put in your pendrive in a USB port. Your pen drive must be atleast 4 GB, 8 GB pendrive is best for this purpose. Now go back to the diskpart console and type listdisk and press enter. This will list the various storage devices available. You can see the size column of the disk and here we can see that disk 2 is our pen drive. Warning: In your computer it may be some other number. In our case it is disk 2.
4) Then you have to type select disk 2 and press enter. Note: in our case it is disk 2, in your case it may be disk 3, or disk 1 or any other number. You can enter detail disk to see the details of the disk after selecting it to verify that you have selected the correct disk. You can see these steps in the image below:
5) Then you have to run a series of commands. The commands to be run in the order are: - clean - create partition primary - select partition 1 - active - format fs=fat32 These steps are shown in the image below:
6) The format step will take some time. You can have a tea or coffee in the meantime and come back. After the format is complete you have to run assign command. And after this you can exit diskpart utility by entering the exit command. The steps are shown below: - assign - exit
- The image below shows all the steps taken from the first step:
7) After the format is complete, put in your original Windows 7 DVD in your DVD drive, or if you have an .iso image of the DVD, mount that image using any virtual drive software like Power ISO. - Now go to My Computer, and open the contents of DVD Drive. Press ctrl+a to select all contents and copy all the contents by pressing ctrl+c. - Now go back to My Computer and open the USB Drive and press ctrl+v to paste all the contents of DVD into the USB Disk.
When the copy finishes, you are done just remove the USB Drive safely and use it to install Windows 7 in your computer/laptop.
This entry was posted by jasmeet on May 11, 2011 at 3:10 pm, and is filed under Life Hacks, Operating Systems, Windows. Follow any responses to this post throughRSS 2.0.You can skip to the end and leave a response. Pinging is currently not allowed.
CAPTCHA Code *
Type your comment
You may use these HTML tags: <a> <abbr> <acronym> <b> <blockquote> <cite><code> <del> <em> <i> <q> <st
rike> <strong>
Post Comment
FIND US ON FACEBOOK
o o o o o
BornIdiot67 posts
Monty41 posts
jasmeet11 posts
Apoorv11 posts
djgovins8 posts
SHOW MORE Home Live TV Life Hacks Gadgets Operating Systems Games Misc About Contact Us