Академический Документы
Профессиональный Документы
Культура Документы
You must read the manual carefully and in its entirety before you can safely use your Dimension rifle.
Thanks for choosing the revolutionary Dimension bolt-action platform. Its called a platform because you can change components and calibers to hunt any game animal in North America. This guide will show you how to change components in less than 3 minutes. You can also watch a demonstration video at www.DimensionRifle.com. The secret to the unique capability in Dimension is our Locking Optimized Components (LOC) System. It allows you to change Dimension components and calibers quickly and guarantees MOA accuracy - 3 shots into a one-inch group at 100 yards. ThE LOC SYSTEM consists of 7 parts a universal stock and receiver that accept multiple barrels, magazine groups (magazine and housing), bolts and bridge scope mounts. Dimension hand tools work with all Dimension rifles. LOC components are sold in color-coded packages. LOC parts are stamped Series A, B, C or D. The package colors help you choose the right components at the store. The letters help you match components once you get them home. UNIVERSAL LOC PARTS: All LOC stocks, receivers, optional bridge scope mounts and hand tools are universal. They fit all Dimension rifle components: Series A, B, C and D.
SERIES LOC PARTS: Bolts and magazine groups (magazine and housing) fit any caliber in a Series: A, B, C or D.* Bolts are stamped with Series letters for easy identification. For example, a Series A bolt fits .204 Ruger and .223 Rem calibers. A magazine group stamped C fits .270 Win and .30-06 Sprg.
(See adjacent table)
CALIBER-SPECIFIC BARRELS: LOC barrels are specific to one single caliber. Each barrel is stamped with a Series letter, so you can identify the bolt and magazine that match it.
(See adjacent table.) * Series B .22-250 REM magazine is different from other Series B magazines.
SerieS
Bolt/Barrel/CaliBerS
.204 Ruger, .223 Rem .22-250 Rem, .243 Win, 7mm-08 Rem, .308 Win .270 Win, .30-06 Sprg 7mm Rem Mag, .300 Win Mag
LOC stocks, receivers, bridge scope mounts and hand tools can be used with any Series A, B, C and D components.
Bolt Release
Safety firSt! Point the rifle in a safe direction. Remove the magazine, open the bolt and inspect the breech to be certain there are no cartridges in the rifle.
3
remove Bolt Open bolt, rotate it up and back until it stops Push in and hold the bolt release Slide bolt handle back and rotate to the left
Bridge Scope Mount
attaCh leverage handle to reCeiver Screw LOC leverage tool into leverage handle hole in receiver
Caution: Do not over-tighten the leverage tool. Damage to tool may occur.
remove StoCk Use Allen wrench on leverage tool or torque tool to loosen receiver screws Lift receiver and barrel off Remove magazine housing from stock
LOC Leverage Tool
Magazine housing
Allen Wrench
5
Gear Teeth Torque Collar
attaCh torque tool, looSen torque Collar Insert torque tool into L hole in leverage tool Align gear teeth on torque tool with gear teeth on torque collar Hold leverage tool and rotate torque tool until torque collar loosens Remove torque tool and leverage tool
Series Letter
inventory new partS Check for same stamped letter designations on barrel, bolt and magazine groups (magazine & housing) to be installed Refer to LOC coding system table for assistance (inside front cover)
8
L (Loosen) hole
holes in Leverage Tool
attaCh new Barrel, replaCe torque Collar Align slot in receiver with barrel alignment pin Snug torque collar by hand
(all threads should disappear)
remove torque Collar, remove Barrel Unscrew loosened torque collar by hand Pull on barrel and receiver, while twisting
Receiver Slot
re-attaCh leverage tool, torque tool Insert torque tool into T hole in leverage tool Hold leverage tool and rotate torque tool until torque collar tightens and torque tool makes an audible click Avoid getting pinched when bringing the handles together
12
attaCh Barrel/ reCeiver to StoCk IMPORTANT! Starting with front receiver screw, snug screws with Allen wrench on leverage tool Tighten both screws with torque tool until audible click is heard
Caution: Avoid getting pinched as the wrench snaps when the correct amount of torque is achieved.
10
Tighten the bridge mount lock screw with the torque tool, to assure repeatable accuracy
Caution: Only use torque tool to tighten screws. Over-tightening with leverage tool can damage tool.
13
inSert Bolt, CloSe Bolt, inSert new magazine Turn bolt handle straight up, push in 2 inches Push bolt release in and hold Push bolt forward, rotate 90 degrees right, until bolt stops Let go of bolt release
11
Caution: The use of tools to change parts on your T/C Dimension comes with the risk of being pinched as parts come together. Be careful when using the tools to prevent this potential problem.