Академический Документы
Профессиональный Документы
Культура Документы
Test 2
2. A plane surface is equipped with an array of straight fins of rectangular profile. The fin height from the wall is 2 inches, the thickness is 1/4, and the span along the wall is 2 feet. The pitch is 1. The fin material is brass (kfin = 60 Btu/hr-ft-F). The convective heat transfer coefficient is h = 20 Btu/hr-ft2-F. The total surface effectiveness is closest to a) b) c) d) 0.675 0.800 0.962 0.977
3. A 3-inch schedule 80 steel pipe (ID = 2.9 inches, OD = 3.5 inches) has an array of fins as shown below. The fins are spines or pin fins (little cylinders) that are 1-inch long and 0.25-inch in diameter. Each bank of fins contains 11 fins spaced equally around the circumference of the pipe. The banks are space 1 inch apart down the length of the pipe. The pipe is 300 inches long. The total number of fins is closest to a) b) c) d) 3,300 11,000 4,200, 12,000
Test 2
5. Which fin construction would have the highest fin efficiency? a) b) c) d) high-k and high-h low-k and high h low-k and low-h high-k and low-h
Test 2
Test 2