Академический Документы
Профессиональный Документы
Культура Документы
Welcome!
Welcome to the world of Linux and MEPIS. If you have just booted the MEPIS Linux LiveDVD or LiveUSB, you have the opportunity to explore some of the features of a whole new computer operating system before you decide to install it! Exploration, evaluation, comparison. . .decision. So far you have taken the first solid step toward a better computing experience, so enjoy exploring MEPIS Linux 11!
Thisispage1of106
2009 as "Lenny" became the new Debian Stable 5.0, in March 2010 MEPIS 8.5 was released integrating the new KDE 4.3 desktop environment. Now MEPIS 11 is released using the latest updates available from Debian Stable 6.0 and the KDE 4.5 desktop. If you use MEPIS Linux, please consider paying for your copy by contributing or shopping at the store. MEPIS Store: http://www.mepis.org/store. Debian Squeeze: http://www.debian.org/releases/squeeze/
1.2: Support
Support source
The primary source of support for non-commercial MEPIS Linux users lies with the Community: Users Manual. Written by MEPIS users who volunteer for the Community Documentation project, this excellent resource is the place to start. It covers all the basics of installation, configuration, troubleshooting, basic/advanced use, and more. It's on the MEPIS LiveDVD, the installed desktop, and online at the Forum (below) and the MEPIS home page. Wiki. Continually edited and updated, the Wiki provides more detailed information on general and specific topics. Subject categories and a powerful search engine make it easy to find what you are looking for. Since all contributions come from volunteers with limited time, the Wiki is not always and everywhere up-to-date. Forum. Several years' worth of searchable discussions provide a wealth of detail on user's concerns. Questions (requires registration) are quickly answered by volunteer members of the world-wide MEPIS users community, and the only stupid question is the one you don't ask. Help with versions earlier than MEPIS 7 can be found in the Archives. Particularly difficult hardware questions that are not answered from these sources can be submitted to Warren at mepis.org; ask at the Forum for details.
Support cycle
How long will your MEPIS Linux 11 continue to have support? The answer to this question depends on the type of support you mean: Hardware. Hardware is supported in the kernel, where continuous development goes on. Very new hardware may not yet be supported, and very old hardware, though still supported, may no longer be sufficient for the demands of the desktop and applications. Desktop. KDE4 is a resource-intensive desktop under very active development. The version shipped with MEPIS 11 has already had many improvements and is considered stable. Applications. Applications continue to be developed after the release of MEPIS 11, meaning that the shipped versions will get older as time passes. In MEPIS Linux, the problem is addressed through a combination of sources: Debian, Warren, and the Community Packaging Team. There will come a point in a few years where it will be increasingly difficult to update applications for older MEPIS versions because the supporting applications have changed so much. The individual user will have to decide when the problem has become critical. Security. Security updates from Debian will cover MEPIS 11 users well into the foreseeable future. Finally, it is important to remember that the number of Community members maintaining installations of earlier versions continually decreases. Although you may still find people able to help with MEPIS 8, few are now available for MEPIS 7 and before.
Bugs
Bugs are errors in a computer program or system that produce incorrect results or abnormal behavior. All software contains them, and the developers upon whom MEPIS Linux relies work hard to correct them. MEPIS has no formal structure or mechanism of bug reporting, but relies on the following informal system: Self help: do a web search on the exact error message, or on a string of words that includes the program and the type of error (e.g., "k3b cd rip failure"). Wiki consultation: search the Wiki for the category of error you are seeing (e.g., "sound not working"). Forum post: report the bug you are seeing in the appropriate place (e.g., Video) on the MEPIS Community Forum, making sure to supply the MEPIS version you are using and any relevant hardware specifications (e.g., "nVidia GeForce 8100").
Thisispage2of106
Email Warren: when the bug has not been solved by Forum members and is in an area that Warren works (such as hardware, the MEPIS Assistants, etc.), then describe it to Warren in an email to dev AT mepis DOT org. Provide as much technical detail as possible so that he can try to duplicate it.
For help outside the scope of this Manual, see Section 11. Creative Commons license: http://creativecommons.org/licenses/by/2.5/
2.1:
Introduction
Getting MEPIS
The MEPIS Linux LiveDVD o r LiveUSB boots your computer without accessing the hard disk. It copies a virtual filesystem into RAM that acts as the center of a temporary operating system for the computer. When you end your LiveDVD session, everything about your computer is back to the way it was, unchanged. This provides a number of benefits: It enables you to run MEPIS Linux on your computer without installing it. It allows you to determine whether MEPIS Linux is compatible with your hardware. It helps you to get a feel for how MEPIS Linux works and to explore some of its features. You can decide whether MEPIS Linux is what you want without permanently affecting your current system. Running from the LiveDVD also has some disadvantages: Because the entire system is operating from a combination of RAM and the DVD, MEPIS Linux will require more RAM and run more slowly in a LiveDVD session than if it were installed on the hard drive. Some unusual hardware that requires specialized drivers or custom configuration may not work in a LiveDVD session where permanent files can't be installed. Installing and removing software is not possible because MEPIS Linux runs from a read-only medium.
Thisispage3of106
Free Download
You can download any testing or final release versions of MEPIS Linux for free from one of the public mirror sites listed on the page linked below. Sometimes the mirrors are a bit behind the MEPIS Subscription download site, and some mirrors get out-of-date from time to time. If you can't find a particular version at one site, it may be available at one of the other sites. Downloading the current MEPIS ISO via BitTorrent is also an option. The LiveDVD you download is actually an ISO: a disk image file in the ISO 9660 file system format. Before trying to turn it into a Mepis LiveDVD, please consult Section 2.2. If you use a free version of MEPIS Linux, please consider making a donation to support further development of MEPIS Linux. Download MEPIS: http://www.mepis.org/mirrors MEPIS torrents: http://www.mepiscommunity.org/en/node/54
2.2: Obtaining & verifying the ISO Demo Version - Evo Pdf Tools
Introduction
This page provides guidance if you intend to download an ISO and burn your own DVD instead of buying it from the Mepis Store.
Thisispage4of106
minimize strain on low-bandwith connections. An added benefit is that most, if not all, BitTorrent clients perform error checking during the download process, so there is no need to do a separate md5sum check after your download is complete. It has already been done! The MEPIS Torrent Team also maintains a seeded BitTorrent swarm of the latest MEPIS Linux ISO, registered at LinuxTracker.org within 24 hours of its official release. Bit-torrent downloads may be somewhat slow following a major release. See link below.
md5sum: Windows
Windows users should download a tool called md5summer (link below): 1. Download the self-extracting .exe file. Double-click it to put 2 files in the current directory: md5summer.exe and md5summer.md5 2. Run md5summer.exe,respondyestoassociateextension.md5 with md5summer program. 3. Now you can either double-click on the .md5 file and the program will check the md5 sum automatically, or from inside the md5summer program you can select the location of the .ISO and .md5files,andthenclickverifysumsandselectthe.md5 file you want to check.
md5sum: Linux
Method 1. The easiest way to check an ISO's integrity in Linux is to use K3b, the CD/DVD burner that is installed with MEPIS Linux 11.0. When you first load an ISO file into K3b, it will automatically calculate and display the md5sum. You can be confident the download is valid if the final five characters match those in the md5sum file you downloaded with the ISO. Method 2. If not using K3b, open up a console/terminal and type:
cd /directoryname
Be sure to replace filename with the actual filename (type in the first couple of letters then hit Tab and it will be filled in automatically). Compare the number obtained by this calculation with the md5sum file downloaded from official site. If they are identical, your copy is identical to the official release.
md5sum: Mac
Mac users need to open up a console/terminal and change into the directory with the ISO and md5sum files. Then issue this command:
md5 -c filename.md5sum
Be sure to replace filename with the actual filename (type in the first couple of letters then hit Tab and it will be filled in automatically).
Thisispage5of106
2.3:
Introduction
Once you have successfully downloaded an ISO and verified its integrity, you are ready to create a bootable medium. For many users, this will be a LiveDVD, but others may need or want a Live USB. Burning a LiveDVD Creating a Live USB
Burning a LiveDVD
General tips
1. Most important: do not burn the ISO onto a blank DVD as if it were a data file! An ISO is a formatted image of an entire DVD. You need to choose Burn disk image or Burn ISO in the menu of your CD/DVD burning program. If you just drag and drop it into a file list and burn it as a regular file, you will not get a bootable LiveDVD. 2. Use a good quality writable DVD with a 4.7 GB capacity.
Windows
If you already have a DVD burning program installed on your computer such as Nero or EasyCD Creator (Roxio), go directly to Step 2. 1. Download and install a DVD Burner such as Cheetah (follow link below). 2. Put a blank medium in your drive. Start the burner, and click Start and choose Burn ISO File (other wording may be used). In Nero and Roxio there is a similar command to Burn a Disk Image or ISO. NOTE: the program names here are used as examples only, and no endorsement or guarantee is intended.
Mac
You probably already have Toast (Roxio) or a similar CD/DVD burning program installed. Just follow Step 2 above.
Linux
In terminal type:
Thisispage6of106
md5sum devicelocation
If you burned a DVD, the typical device location ("mount point") is /dev/cdrom. Other devices can be hdc or scd0. Navigate with the file manager Dolphin to /etc/fstab to check the device names on your system. Wait for the MD5 sum to be calculated, and compare it with the sum obtained from the download site: they should be the same.
Windows
1. 2. 3. 4. 5. Get the free version of the Windows application IsoBuster from the link below. Insert DVD in drive. Run IsoBuster as Administrator. In registration dialog, select Freefunct.only. In left pane, right-click on DVD (top line) to get context menu, and select: MD5 Checksum file > Create MD5 Checksum > For image file with 2048 bytes/block. 6. Compare the MD5 in the .tao line of the output with that of the downloaded ISO. NOTE: the Windows program cited here is used as an example only, no endorsement or guarantee is intended.
Mac
When you select to verify the data in Toast or another burner, a byte-for-byte comparison with the ISO file will be carried out to check the DVD's integrity.
Troubleshooting
If you verified the md5sum of the ISO before you burned, but the DVD you burned is no good: Try burning again at a slower speed. Try another blank disk.
Thisispage7of106
If unsure or uncomfortable about changing the BIOS, ask for assistance in the Forums. On older computers without USB support in the BIOS, you can use the Plop Linux LiveCD that will load USB drivers and present you with a menu. See the website linked below for details. Once your system is set to recognize the USB Drive during the boot process, just plug in the Drive and reboot the machine.
3:
3.0: Introduction
Pre-Installation
Before launching into an installation of MEPIS Linux, there are a few steps you will want to take. This includes checking your hardware for compatibility issues, preparing your hard drive, and backing up any important files from your current operating system.
Pre-installation steps: 3.1 System requirements 3.2ComingfromWindows 3.3 Booting up 3.4 The new desktop 3.5 Partitioning the hard drive 3.6 Exiting
3.1:
Introduction
System requirements
The following are minimum and recommended hardware requirements for installing MEPIS Linux. Keep in mind the following: Minimum specifications are only what is required for install. You will get poor performance from a system with minimum specifications. Hard drive space directly correlates to the number of files you can store and additional programs you can install. More RAM will allow you to run more programs at once, and will make MEPIS Linux more responsive.
Thisispage8of106
Minimum specifications
Minimum specifications usually allow installation and booting, but severely restrict performance. If you have trouble booting from the LiveDVD, try switching to a LiveUSB.
MEPIS Linux
A DVD drive (and BIOS capable of booting from that drive), or a live USB (and BIOS capable of booting from USB) A modern i686 Intel or AMD processor 512 MB of memory 5 GB free hard drive space A SoundBlaster, AC97 or HDA-compatible sound card. Note: To run MEPIS Linux 64bit, you will need a AMD Athlon64, Athlon64-FX, Athlon64-X2, Opteron, Sempron64, Turion64, or Intel Core 2 Duo desktop, Core 2 Duo mobile, Pentium4 Prescott with EM64T, PentiumD with EM64T.
Recommended specifications
MEPIS Linux
A DVD drive (and BIOS capable of booting from that drive), or a live USB (and BIOS capable of booting from USB) A modern i686 Intel or AMD processor 1 GB RAM or more at least 10 GB free hard drive space a 3D-capable video card for 3D desktop support
3.2:ComingfromWindows
Introduction
IfyouaregoingtoinstallMEPISLinuxasareplacementforMicrosoftWindows,itisagoodideato consolidate and back up your files and other data currently stored in Windows. Even if you are planning to dual-boot, you should make a backup of this data in case of unforeseen problems during the install.
Backing up files
Locate all of your files, such as office documents, pictures, video, or music: Typically,mostofthesearelocatedinMyDocumentsfolder(C:\Documents and
Thisispage9of106
Settings\Username\My Documents in Windows 2000, XP, and Vista, or C:\My Documents in Windows 95, 98, and ME). Search from the Windows start menu for various types of files to make sure you have found and saved them all. Once you have located all such files, burn them to a CD or DVD, or copy them to an external device such as a USB hard drive or second computer.
Browser favorites
Web browser favorites (a.k.a. bookmarks) are often overlooked during a backup, and they are not usually stored in a conspicuous place. Most browsers contain a utility to export your bookmarks to a file, which can then be imported into the web browser of your choice in MEPIS Linux. Here are some export methods for common web browsers: Internet Explorer Click File > import and export, select export favorites, select the favorites folder (to export all favorites), select export to file or address and enter a
Thisispage10of106
filename for the favorites. Firefox 3 and above Click Bookmarks > Organize Bookmarks, highlight the bookmark folder to backup, click Import and Backup - Export HTML..., enter a filename for the bookmarks. Opera Click File > import and export, choose export Opera bookmarks (if you plan to import them into Opera) or export bookmarks as HTML (if you plan to import them into another browser), select the location for the favorites file.
Software licenses
Many proprietary programs for Windows are not installable without a license key or CD key. Unless you are set on doing away with Windows permanently, make sure you have a license key for any program that requires it. If you do decide to reinstall Windows (or if dual-boot setup goes awry), you will be unable to reinstall these programs without the key. If you cannot find the paper license that came with your product, you may be able to locate it in the Windows registry, or using keyfinder software (example link below).
3.3:
Booting up
These are handled by a bootloader named GRUB that allows you to have several operating systems on your computer. The default boot choice should work for most computers. The AUFS option below Default adds a read/write filesystem module that allows software to be installed and used during a LiveDVD or LiveUSB session but not beyond. You can also run GRUB from the command line when booting, see the Wiki entry listed below.
Cheat codes
If you look at the bottom of the GRUB screen, you will see a cursor blinking at the end of a row of codes. You can add a cheat code here to pass a command (along with a value, when applicable) to
Thisispage11of106
the system in order to adjust for special situations, typically display problems. Here are some of the most common codes used: noagp nomodeset rootdelay xdrvr vga=normal Disable AGP (Accellerated Graphics Port) Instructs the kernel not to load video drivers. Good to try this when you get black screen with a nVidia card. introduces a wait period (use = and a value in seconds) that allows devices to settle down. Try this if you have problems booting, typing rootdelay=30. Specifies a video driver for your hardware. Common uses: xdrv=vesa for a generic driver, xdrv=intel for an unrecognized Intel driver. Can be used with older hardware to disable default resolution.
A full list can be found in the Wiki entry listed below, and you should ask on the Forum about any problems you are experiencing.
Login
If all goes well, you will arrive at a graphical login screen ("kdm") asking for a username and password. Type in demo for both and hit Enter to log in to MEPIS Linux. Note: do not log in as root if you will be installing, as that can lead to errors. Note that there are also buttons for "Session type" and "Menu." The allows you to pick which desktop environment or window manager you want to use; the default is the one used for the last session. The Menu button allows you to reboot, exit, etc.
MEPIS Wiki: GRUB: http://www.mepis.org/docs/en/index.php?title=GRUB MEPIS Wiki: GRUB from the command line: http://www.mepis.org/docs/en/index.php? title=GRUB_from_command_line MEPIS Wiki: Cheat codes: http://www.mepis.org/docs/en/index.php? title=Cheatcode
Plasma
Plasma provides the desktop interface for KDE 4, including the application launcher (start menu), the desktop and the desktop panel. Plasma also provides many standardized services such as artwork, presentation and script management. Plasma uses a system of applets that are collectively called plasmoids, but range from informative widgets (see below) to mini-applications like calculators and dictionaries. An applet may also contain another applet (known then as a containment). An important feature of Plasma is that there is no longer a distinction between panels (like the taskbar), desktop icons, and widgets; they are all created and treated the same way. WhatiscommonlyreferredtoasthecashewisthePlasmalogoyoucanfindonthedefaultdesktop, on the upper right corner, and on the right-hand side of the panel. By right-clicking to unlock widgets and clicking on a cashew, you can access configuration options and features; you can also just right click on the desktop.
Thisispage12of106
Widgets
A widget is a basic visual building block of the Plasma desktop (the GUI) which, combined in an application, holds all the data processed by the application as well as the available interactions with this data. Other common names are applet or gadget. Superkaramba Themes, Apple's Dashboard, Google Gadgets, Yahoo Widgets, Vista Sidebar Widgets, and Opera Widgets are all examples of other widget systems, some of which Plasma also supports. A certain number of widgets are supplied by default, and others are downloadable via the Add Widgets dialogue box. To add a widget to the desktop or panel, first unlock the widgets if they are locked, then simply right-click anywhere, select Add Widgets..., and choose the widget from the list. Particularly useful widgets include: Folder View: displays the contents of any folder Quicklaunch: allows up to 6 applications to be available with a single click, nice on the desktop for the most used apps System Monitor: various monitors: hard disk, network usage, temperature, etc. When you are done working with your widgets (including the panel), don't forget to lock them by right-clicking on the desktop (or the panel, under Panel Options) and selecting that command. This will prevent your widgets from possibly moving around or even disappearing.
Adding Widgets
To add widgets to the desktop: right-click an empty space on the desktop and select Add Widgets, then drag the widget onto the desktop To add a widget to the panel: right-click an empty patch in the panel, and select Panel Options > Add Widgets
In the dialog box that appears, select a widget. Use the arrow symbols to the left or right to scroll through the widgets available, you can also enter a search term in the input field. To make the selected widget appear on the desktop or in the panel, double-click it, and then close the dialog box.
To remove a widget from the desktop or panel: right-click the widget and select the Remove entry. If these menu options are not available, your desktop elements are probably locked! In this case rightclick and select Unlock Widgets.
Hover your mouse cursor over the widget until a translucent frame appears around the widget, showing a number of symbols. Make sure the widgets are unlocked first. To change the widget size, left-click on the scale symbol in the frame and keep the mouse button pressed while slowly moving your cursor across the desktop. To rotate the widget in any direction, left-click the arrow symbol in the frame And keep the mouse button pressed while moving your cursor in a circle across the desktop. Thereisastickyboundaryinthehorizontalandverticalpositionswhereyoucanclampthe widget, if you like. Of course, you can also arrange it in any tilted position. To change the contents, settings, or properties of a widget, left-click the wrench symbol in the frame and use the configuration dialog box that appears. Additional widget source files can be obtained from KDE-look.org under plasmoids. Those that are not directly downloadable (as binaries from the "Add Widget" dialog) can be downloaded as source files that will need to be compiled (see Section 7.3). Compiling instructions are included in the compressed file that contains the source code.
Thisispage13of106
Panel
By default, the panel ("Kicker" in KDE3.5) appears along the bottom of the screen, and takes up much of the width of the screen. It is something of a one-stop shop for almost anything that you might want to access quickly. MEPIS comes with a default panel described below, but the panel is also capable of running any docked widgets and extensions, such as child panels.
Icon key to default panel: By default, the panel on the KDE4 desktop in MEPIS 11 contains L-R: The Main Menu icon on the extreme left. Installed programs are automatically listed in the Main Menu in the appropriate category. To start a program, click on the Main Menu icon in the panel or press Alt + F1, then navigate to the program listing and click it. The Pager, which provides access to virtual desktops (see #9 below) Quick launch program icons. In the middle the Taskbar shows currently open windows. On the right, the System Tray holds current essential processes: Information Power status Upgrade notifier Clipboard Sound mixer Device notifier Power management Network manager Hidden icons Clock/calendar The panel settings icon ("cashew") is on the extreme right. When you hover the mouse pointer over an icon in the panel, a short description is displayed. There are other options off the context menu when you left-click the panel's cashew on the right end and select Panel Settings:
The arrows on the right will adjust the maximum and minimum sizes of the panel. The left arrow indicates the starting position. Screen Edge allows you to choose the location by dragging. Height determines the height of the panel by clicking / dragging. The result is visible in the release of the click. More Settings gives you a sub-menu of more options such as hiding, alignment, etc.
Configuring Panels
You can customize all KDE panels according to your preferences. Applications and widgets can be added to the quick launch area, the system tray in the main panel or to additional panels. Panel elements and additional panels can be moved to different places or be completely removed at any time. To access any options for the current panel, right-click an empty patch in the panel (or click the cashew icon at the end of the panel) and select Panel Options > Panel Settings. The panel changes view and shows its configurations options. (If the menu item and the icon are not available, your desktop objects are probably locked. To unlock, right-click and select Unlock Widgets first.) To move panel objects to a different place within the panel, hover the mouse cursor over the respective panel object (for example, program icon, pager, etc.). The mouse cursor turns into a crosslines-like form. Click the object and move the cursor to the desired position in the panel. Click again to fix it at this place. To enlarge the distance between two widgets, use Add Spacer..... A spacer widget appears on the right side. Drag and drop it to the preferred place. To change the panel width, click and drag the small arrow icons at the left and right end of the settings panel. To change the panel height, click the Height button and move the mouse cursor to the desired end location. To place the panel at different sides of the screen use the Screen Edge button. Drag and drop the panel to the preferred position. If you need additional widgets on your panel, add them with the Add Widgets.... button.> To remove program icons or widgets from the panel, right-click the unwanted object and select the menu item to remove the icon or widget. The icons in the system tray usually belong to applications running in the background. Therefore you can only remove those icons if you close those applications (right-click the icon and select Quit).
Thisispage14of106
To prevent the panel and widgets being moved accidentally, right-click and use Lock Widgets. For additional configurations options like alignment and functions, click More Settings. When all panel changes are done, close the panel settings with red close button on the right side.
Menus
You have the option of 3 menus in KDE 4: Classic menu (default) Kickoff: new style menu Lancelot, an automatic menu The first two are installed by default, and are toggled by unlocking widgets, then right-clicking the menu icon and selecting the alternative. Lancelot must be installed as a widget; once it is installed, the classic Menu can be restored by installing the widget "Application Launcher."
System Settings
TheKDEcontrolcenteriscalledSystemSettings,andistheplacetogotochangeanysettingsthat affect the whole KDE environment. You can open it from the crossed tools icon in the panel, or by clicking Start Menu > Settings > System Settings. The System Settings screen is divided into a number of separate areas, each of which contains several icons: Common Appearance and Behavior Workspace Appearance and Behavior Network & Connectivity Hardware System Administration Lost and Found To find a particular setting, use the search box in the upper right corner, or hover your mouse over the icons to see their contents.
Krunner
Krunner is a tool for searching and launching files and applications. It can also be used for more generic operations such as calculator or unit converter. To start it: 1) click Start Menu > Run Command, 2) Press Alt+F2, or 3) right-click the desktop > Run Command. The KDE 4 version performs many functions (click the question mark for help), for instance: Application launcher Begin to type the name of the application you want to run. Krunner will grow a short list of applications based on the letters you type. You can finish typing the name, or just click the right one from the new short list. If an application requires root access, you should get a dialog box for the password. Occasioinally, you must tell KDE that you want to function as root by typing: kdesu applicationname
Calculator You can use Krunner as an efficient calculator. Just type the expression you want to evaluate such as 32*12= or =32*12
(You can put the = sign before or after the expression). It is possible to evaluate more sophisticated expressions such as: =sqrt(4) + 32 * sin(60)
Converter You can quickly convert measurements in Krunner by just typing in the value and unit. For instance, if you type: 3m in ft
you will see the result: 9.84251968503937. Running BASH commands Krunner doesn't only recognize applications, but also all binaries throughout your system. You can use this ability to run bash commands such as cp, mv, etc. To do so, start Krunner and type the commands just as you would in Konsole, for example:
Thisispage15of106
cp ~/Documents/myFile ~/myFile
Internet commands Enter any URL and the page will pop up in your default browser. Task-oriented searches Start Krunner and click on the wrench symbol > User Interface tab, then select Task Orientated >OK. This changes Krunner into QuickSand, an alternative front end. Just start typing to initiate a search. QuickSand represents matches to a query as a scrolling line of icons. A completion box of matches is also shown when the matches first arrive. The list can be scrolled using the up and down arrow keys when the completion box is shown or the left and right arrow keys.
File management
Dolphin is the default file manager in KDE4. By focusing exclusively on file management, Dolphin avoids many of the pitfalls inherent in the Konqueror approach familiar from KDE 3.5, leading to such items as a more flexible sidebar system and a less-invasive notification system that doesn't interrupt user work flow. Konqueror can still be used as file manager (as can other alternatives, for that matter) and in fact it shares the fileview functionality with Dolphin. On the left-hand side, Dolphin's Panel provides quick access to your most often used locations, called Places.Justdragafoldertothesidebartobeabletoquicklyaccessit,notonlyfromDolphinitself, but also from the KickOff Places tab and the Lancelot Computer tab. Right-click an empty space in the Panel to see other options. Some hints and tips to get you started: F4 opens up a terminal at the bottom in the current folder, while F3 gives you a split view that is handy for moving or copying files. For directories containing lots of images, press the preview button in Dolphin's toolbar and get previews of the files located in the current directory. For very large images, you will have to change the limit in Settings > Configure Dolphin > General > Preview tab. To quickly move between directories, click on the "breadcrumbs" located right above the main view screen (e.g., Home > Mail > Inbox). Clicking on the arrow next to one of the breadcrumbs lets you move swiftly to different subdirectories. Forasidebysideviewthatmakescopyingfilesbetweendirectorieseasy,hittheSplit Viewbutton.
Dolphin remembers settings for a specific directory, but you can also set global defaults by clicking Settings" >Configure Dolphin. For more tips and hints, as well as customization ideas, follow the link below to the Wiki.
Thisispage16of106
to show the annotations for the current page only. To open a pop-up note and add text for an annotation (or to remove an annotation), rightclick the annotation entry in the Reviews list and select the corresponding menu item. The annotations or markers you added are automatically attached to the file: you do not need to save them.
KWallet
Kwallet is a password management tool that can collect and store all passwords in one or more encryptedfiles(calledwallets).WhenyouenterapasswordinaKDEapplicationforthefirsttime(in Kmail of Network Manager, for example), you are asked if you want to store the password. If you click Yes, Kwallet wizard opens by default. Note: if you do not want to use KWallet, you still must step through the dialog box the first time it comes up.
To activate Kwallet, select Basic Setup and click Next. Select Yes, I wish to use the KDE Wallet to store my personal information and enter a password. This is your master password for the default wallet (kdewallet) that will be created during the next step. Then click finish to close the wizard.
If you started the Kwallet wizard from another application like Network Manager or Kmail, Kwallet will prompt you to enter the password again in order to store the password for this application in the newly created wallet. After initial configuration you can open your wallet at any time to view, search, delete, or create entries. Normally you do not need to add additional data manually. KDE recognizes if a resource requires authentication and Kwallet starts automatically, prompting you for the Kwallet password,. To configure any Kwallet options, press Alt + F2 and enter kwalletmanager. Then, in the Kwallet Manager that opens, select Settings > Configure Wallet.
Desktops Activities
Desktop Activities is a desktop usability concept that allows you to have multiple settings for your desktop or desktops, something not possible for the virtual desktops accessible through the Pager. Activities allow you to specialize each desktop (AKA "activity") to whatever task you need to accomplish, and to distinguish it by selecting a different set of plasmoids/wallpapers/information for each. To change an existing activity, right-click the Desktop > Folder View Settings. Then click on Activities in the left panel, then use the Type pull-down menu to select what you want. To create a new activity, click on the Desktop upper-corner cashew > Unlock Widgets, then click on it again > Zoom Out. This causes the desktop to shrink. Now click on the green plus sign "Add Activity" and you should see a new blank desktop besides the old one. This can be repeated multiple times. Click on the + (plus sign) for the desktop you wish to use, then set up your Desktop by clicking on the wrench icon (Desktop Settings) below it; when you have finished, do not forget to lock widgets. If you want to remove an activity later, unlock the widgets and zoom out from your current desktop view, then select the red cross from the toolbar underneath to remove the activity. Available activities for KDE 4.5 include: Folder view (default) -- displays the contents of a folder (by default the user's Home directory) Desktop view -- displays a blank desktop to which widgets can be added as desired Newspaper -- displays widgets you add in two columns Search and Launch -- displays icons for each menu entry, and has a quicklauch bar on top Right-click the desktop > Folder View Settings. Click on Activities in the left panel, then use the Type pull-down menu to select
Thisispage17of106
Search and Launch Containment and click OK. To configure what appears in the main panel, right-click the desktop and select Configure Search and Launch, then click on Main menu in the left panel. To remove an icon from the upper bar, hover your mouse over it and click on the minus sign. To add an icon to the upper bar, click on an icon in the main area then hover your mouse over the application you want and click the plus sign. To get back, right-click the desktop > Configure Search and Launch > Activities and use th pull-down menu to return to your preferred type.
To switch quickly between the activities: create a new panel and locate it where you want it, then add the widget "Activity Bar" to the panel. If you like, you can resize the panel to match the bar and set it to auto-hide.
Netbook desktop
There is also a special configuration called Netbook. To switch to the Netbook Desktop: Click System Settings > Account Details > Social Desktop and un-check Enabled. Go back by clicking arrow at the top left of the dialog, click on Workspace > Workspace Type > Netbook, click Apply. A Search and Launch as described above (with a different wallpaper) will be created as well as a Page One that is linked by default to openDesktop.org. Below is the default Page One with a random weather location but no sources selected for the Community or Knowledge widgets.
When Netbook is first launched, it is recommended that you cancel the login dialogs that pop up. Also, you probably will want to click on Page One at the top of the page, and delete the Community and KnowledgeBase widgets with the black cross in the top right corner of each, or by right clicking and selecting delete from the context menu (they can be reinstalled later if required). Then use the Search and Launch tab at the top of the page to return to the main desktop. For details about this Netbook configuration, see the Wiki entry below.
Applications
There are a few programs you may want to investigate while booted to the LiveDVD: Firefox is the default web browser in MEPIS Linux.
Thisispage18of106
Kopete is an instant messenger client that supports several popular IM services, such as Yahoo, AIM, and MSN. Kmail is an email program that belongs to KDE's personal information manager applications. You can install Kontact as a single application for all PIM components: calendar, email, addressbook, sticky notes, RSS aggregation, etc.. MEPIS Linux includes a few games, such as solitaire. You can even play them while you install! KsCD is a music player. You can use it to play music files or CDs. The video player KMplayer will handle all sorts of videos. For more information on available applications, see Section 8.
Troubleshooting
DVD won't boot. If you have checked the integrity of your ISO, make sure your computer is set to boot to the DVD drive. Newer computers often have a hotkey such as F8, F10, or F12 which will invoke a boot device menu when pressed during startup. For older machines, you may need to edit your system's boot device order in the CMOS (BIOS) settings. Please consult your system's operating manual for the correct procedure. LiveDVD stops during boot, or once booted performs exceptionally poorly. Try some of the Boot Options that can be found by clicking F1 on the opening screen (GRUB). Problems with hardware, for instance, can often be overcome by entering noacpi, noapic, and/or nolapic. Does not boot to graphical login (kdm). First, check that you have a good download and burn, as described earlier. If that is OK, then try these steps: Boot using the Safeboot option on the opening menu (GRUB) Reboot, highlight the kernel you want to use (usually the most recent), and add at the bottom where the cursor is blinking vga=normal and xdrvr=vesa Try adding at the bottom acpi=force or acpi=off If you continue to have problems, use the MEPIS X Windows Assistant (Section 5.3.4) to copy a working configuration to your computer. Sound not working. Here are some steps to follow if you have no sound: Take a look in the mixer (KMix) settings and make sure that all the sliders are enabled. Then on the KMix menu bar go to Settings >Configure Kmix, and make certain the "restore volumes on login" is checked With some cards it is sometimes necessary to open a terminal, become root, and type (one line at a time): alsaconf alsactl store
Note: 1) alsactl is part of alsa-utils, which is not installed by default; 2) in mid-2009 '''alsaconf''' was removed from alsa-utils and is no longer available through the Debian repos, though it is available from the Community repos. Try opening a terminal and becoming root, then typing: dpkg-reconfigure alsa-base
For ''snd-hda-intel'' systems try right-clicking the desktop > Run Command, and enter kdesu kwrite /etc/modprobe.d/snd-hda-intel
Thisispage19of106
Once that file opens, comment out the first line; if that doesn't work, try commenting out the second line instead if it is not already. Save, and then run alsaconf. In the second line of that same file, try adding your specific machine model, for instance: Options snd-hda-intel model=lenovo
or the name of your sound card, for instance Options snd-hda-intel model=Realtek ALC888
You can get your card model by entering in a terminal: cat /proc/asound/card0/codec#* | grep Codec
3.5:
Introduction
Before starting the install, you may wish to prepare the partitions on your hard drive to install MEPIS Linux. You can do this during installation, but it is recommended that you do it before starting the install. Note that some older hardware may require a restart after the partition tables are edited.
About partitioning
To prepare the hard drive for MEPIS Linux, it is recommended that you create three partitions: one for the root of the filesystem, one for the user home directories, and one for swap (virtual memory). You do not have to create a separate home, but it makes upgrades easier and protects against problems caused by users filling up the drive. If you choose to install to the entire disk without partitions, you can skip this next section.
Thisispage20of106
the swap space double the size of your RAM, but no more than 1 GB (1024 MB). Notes: 1) gamers should note that they will need a bigger Root partition than usual, since the big games such as Westnoth or World of Padman will fill up a 10 GB root partition very quickly; 2) it is a good idea to plan on keeping about 10% of a partition as free space to avoid file fragmentation.
Let's start by creating the Root partition that will hold the operating system. Make sure you have already figured out how to divide up the partition you just created. 1. RightclickontheunallocatedpartitionandselectNew.Youwillseethis dialog box:
Thisispage21of106
2. Usually you will select Primary for partition type unless you have more than 4 partitions (see hard drive names). 3. Select Ext3 as the File system, and set the size so that enough is left for Home and Swap. ClickOK. 4. It is often very conventient to add a Label (here something like: "MEPIS 11") when you create a new partition. 5. ClickOK Now for the Home partition: 1. Repeat the steps above, again selecting Primary and Ext3. 2. Set the size, making sure to leave enough room for the Swap partition. 3. If you do not want to create a separate partition for Home, your personal files will be in the Home folder of the root partition you created before. Finally, the Swap partition: 1. Repeat the steps to above, again selecting Primary as the Partition type. 2. Select linux-swap as the File system 3. Make the size at least equal to the amount of RAM you have installed. 4. When you have finished, you will see something like this:
Thisispage22of106
3.6:
Exiting
It is important to exit MEPIS Linux correctly when you have finished your session so that the system can be brought down in a secure way. All running programs are first notified that the system is going down, giving them the time to save any file being edited, exit from mail and news programs, etc. If you just turn the power off, you risk the possibilities of damaging the operating system. There are two common ways to exit a session correctly: Right-click the open desktop, and select Leave to see this dialog box.:
For further options, press and hold the left mouse button on one of the choices. Click Start Menu > Leave for exit options:
Permanent
To leave a session for good, select one of the following: Log out (End Session). Choosing this will end everything you are doing, if you have not closed/stopped things yourself, and bring you back to the login screen with the system still running. You can also get back to the login screen by clicking Ctrl-AltBksp, but any open programs and processes will not be saved. Turn Off/Restart. Self-explanatory options that alter the system state itself.
Temporary
You can temporarily leave your session in one of the following ways: Lock screen. This option protects your Desktop from unauthorized access while you are away by requiring your user password to return to the session. Start a parallel session as a different user. You choose this to leave your current session where it is and be able to work for a short time as a different user. Suspend to RAM (Sleep). This option places your system into a low-power state. Information on system configuration, open applications, and active files is stored in main memory (RAM ), while most of the system's other components are turned off. It is very handy and works very well in MEPIS Linux, though some systems may may not automatically restore wireless and/or bluetooth. Suspend to Disk (Hibernate).This selection will save running processes to the hard drive and power down the computer. In MEPIS Linux the success of this choice varies among systems, with often no restoration happening. Some users report success with the following addition (replace "/swapdrive" with the correct drive, e.g. /sda2) to /boot/grub/menu.lst: resume=/swapdrive
Thisispage23of106
Emergency
Once in a while you may encounter a total lockup of your computer that cannot be corrected by killing a runaway program (Section 8.7). The desktop freezes and becomes entirely unresponsive. You have two options remaining, both of which use the SysRq key (on some keyboards, the key may be labeled Prt Scr or Print Screen).: Force X to restart.Hold down the Alt-SysRq keys, and press K; all session processes will be killed and you will end up back at the login screen. Use magic SysRq key (REISUB).Hold down the Alt-SysRq keys (sometimes only the left Alt key will work), and slowly press the keys R-E-I-S-U-B; your system should shut down correctly and reboot. The purpose of this magic key is to go through several stages that nurse your system safely out of a failure of some sort, and often only the first 2 letters are sufficient. Example, Alt-SysRq + R, then E, then try what you were attempting to do before the failure, if the system is still unresponsive, continue with the I, try again and if you still have no joy, you may as well finish the sequence.
4:
4.0 Introduction
Installation
ThemottoofMEPISLinuxisEasytotry,easytoinstall,easytouse.Andindeed,youwill most likely discover that MEPIS Linux is the easiest and friendliest operating system installation you have ever used.
Section 4.1: Detailed Steps for Installing MEPIS Linux on most computers Section 4.2: Installing in special situations Section 4.3: Troubleshooting installation problems; Links and Guides Section 4.4: Installing on Apple Intel computers Section 4.5: Uninstalling
Thisispage24of106
5: Configuration 6: The Command Line 7: Software Management 8: Basic Use 9: Advanced Use 10: Under the Hood 11: More Resources 12: Glossary
Page 2b (Preferences): CheckPreservedatain/homeifyouaredoingan upgrade and already have data in an existing home partition; note that this option is not recommended. Select Check for badblocks if you want to do a scan for physical defects on the harddrive during formatting. This is recommended. Finally, you can optionally select the type of filesystem you want to use on the hard drive. If you don't know what to choose here, the default ext3 is recommended. In MEPIS Linux, ext4 is available (see Section 10.1).
Thisispage25of106
your computer, you may safely disable bluez. cupsys is the Common Unix Printing System. You should install cupsys if you intend to print from this machine or use it as a print server.
Are case-sensitive. Should be secure, especially the root password. They should be at least six characters, contain a mix of upper- and lower-case letters, numbers, and symbols, and should not be based on a dictionary word. Should not be forgotten. You'll need to have root password to do any administrative task on the computer, such as installing software or configuring hardware, so it is advisable not to use for the root account passwords that others may guess easily, like "root."
Finished!
This concludes the setup. Click Finish, and you will be prompted as to whether or not you want to reboot. Click YES. The LiveDVD will shut down and the disc will be ejected. You can now boot into MEPIS Linux!
4.2:
Older hardware
Special situations
If you are trying to install MEPIS Linux on older hardware, and the LiveDVD is running very slowly, try the following: Don't load KDE: At the login menu, go to the Session menu and select failsafe, then log in as root (password is root). You will find yourself at a command prompt.
Thisispage26of106
Enter the command minstall. This will launch the installation wizard, and you can proceed with section 4.1 from step 2. Install using a different machine: Remove the hard drive from your old computer, and insert it into a faster machine. Run the MEPIS Linux install as described in section 4.1. After installation is complete, remove the hard drive and put it back in the old machine. Because MEPIS Linux redetects all hardware on every boot (rather than once during the installation), you should have little or no problem. Try antiX: If your hardware is very old (near or below the minimum requirements), you may have better results from antiX. This community remaster of MEPIS Linux was designed for old machines.
Without a DVD
Even if your computer does not have a bootable DVD drive, you can install MEPIS Linux. For instance, if your system supports booting from a USB drive (Apple does not) you should be able to boot to the flash drive and proceed with the install normally. On a second computer, boot to the LiveDVD and create a bootable MEPIS Linux flash drive using the MEPIS System Assistant. Most users report this method is actually much faster than a traditional CD/DVD installation. Check the MEPIS Wiki for details and current status. For other alternative boot methods, see this Links and Guides subsection.
4.3:
Troubleshooting
Thisispage27of106
It sometimes happens that the filesystem type is reported incorrectly for ntfs or vfat partitions, showing them as ext3 or ext4. This is usually caused by the filesystem type being set incorrectly in the MBR tables. When you reformat a partition to a different type, that only changes the actual format of the partition, it does not update the MBR. It may be possible to change this by using the command line utility cfdisk (type man:cfdisk into a Konqueror address field for details), but that can fail if irregularities exist such as with the cylinder end point (common when multibooting with Windows Vista or Windows 7). Always reliable will be to open a root Dolphin by clicking Start Menu > System > Dolphin as su, navigating to /etc and clicking on the file fstab. Back it up immediately as fstab_old o r something similar so you can restore it if necessary. Look for the problem partitions, for example:
Although the partition is labelled with the filesystem type ext3 (in red above), let's say it is actually ntfs or vfat. Highlight ext3, delete it, and enter auto so the corrected line looks like this:
Check carefullly that you have not made any mistake, then save the file. Note: it is often more reliable to specify auto-detection of a Windows filesystem type than to try to specify it.
4.4:
MEPIS Linux is compatible with Apple Intel computers: those based on Intel x86 CPUs, with the exception of some small details. Intel Core 2 or Xenon-based Apple computers can run 64bit MEPIS, but all Intel-Core-based Apple computers can run 32-bit MEPIS. MEPIS Linux has a utility for preparing your Apple bootable hard drive for OS X so that you can install MEPIS Linux painlessly. This MEPIS Assistant is compatible with OS X Tiger and Leopard. There is a README file in the in the LiveDVD OSX directory with more information. Instructions for installation: 1. Put the MEPIS Linux media into an appropriate drive, and use the Finder to navigate to the OS X folder of the DVD. 2. Drag and drop the MEPIS Linux Assistant for OS X (SimplyMEPIS Assistant.app.zip) to the OS X desktop. 3. Unzip it, then launch the SimplyMEPIS Assistant.app and follow the instructions. 4. When prompted, reboot into the DVD and install MEPIS Linux following the directions in Section 4.1. 5. Install MEPIS Linux on the partition you created with the MEPIS Linux 8.5 Assistant for OS X. 6. Install GRUB on root. DO NOT install it on the MBR. 7. If GRUB installs OK, finish the installation, and reboot into OSX or MEPIS Linux. 8. If you get an error message that says: "Sorry, installing GRUB failed. This may be due to a change in the disk formatting." then do the following: 1. Quit the installation process, and restart your Mac.
Thisispage28of106
2. At the rEFIt startup screen, use your left and right arrow keys to select "Start Partitioning Tool". You will see a list of partitions and proposed updates to the MBR. Press "y" to accept the MBR updates. 3. At the rEFIt startup screen, use your left and right arrow keys to select the "Shut Down Computer" or "Restart Computer". 4. Start the computer, and go back to step 7. You should not get the GRUB installation error again. 9. After installing MEPIS Linux, return to the Assistant in OS X to enable dual booting. NOTE: the Installer disables options that would be likely to damage your OS X System Drive. Do not try to use Parted, KDE Partition Manager, or QTParted to do anything on an OS X System Drive. If used, parted will probably destroy the OS X installation and make the disk unbootable.
4.5:
Overview
In many instances, removing MEPIS is no different from that of any other operating system. But when you need to remove MEPIS from a dual boot system and restore the original single partition structure, the procedure is somewhat more complicated.
5. When all Linux drives are done, then resize the Windows drive to the maximum. 6. Reboot without the DVD into Windows, which will probably tell you it has to check the drive.
5:
Configuration
Thisispage29of106
5.0: Introduction
This section covers configuration instructions in order to get your system running correctly from a fresh installation of MEPIS Linux. For optional customization and personalization features, see the first two items under Links and Guides at bottom. Click on any of the following links for details about configuration in that topic area: 5.1: 5.2: 5.3: 5.4: 5.5: 5.6: 5.7: 5.8: Quick fixes Peripherals MEPIS Assistants GRUB Bootloader Display Network Sound Bluetooth
5.1:
Quick fixes
After a fresh installation many people find these first steps useful to get going. For personal customization, see final Wiki link.
Manual links:
Wired internet connection (Section 5.6.1.1)
Wireless internet connection (Section 5.6.1.2) Adjusting fonts and display resolution (Section 5.5) Sound configuration (Section 5.7) Set language, keyboard, time format and other locale items(Section 5.9)
Wiki links:
Easy installation of common software packages: http://www.mepis.org/docs/en/index.php?title=Smxi Access the Windows side of a dual-boot: http://www.mepis.org/docs/en/index.php?title=Kwikdisk Change the Desktop wallpaper: http://www.mepis.org/docs/en/index.php? title=Change_Wallpaper Set up a screensaver: http://www.mepis.org/docs/en/index.php? title=Xscreensaver Create a link on the desktop: http://www.mepis.org/docs/en/index.php? title=Creating_a_link_on_ the_desktop Change measure units: http://www.mepis.org/docs/en/index.php? title=Change_Measure_Units Other customization: href="http://www.mepis.org/docs/en/index.php? title=Category: Customization
5.2:
Peripherals
This section covers how to install and set up peripherals in MEPIS Linux.
Thisispage30of106
How to set up a camera How to set up a monitor How to set up a printer How to set up a webcam How to set up a scanner How to set up a handheld device How to set up a MP3 player
Click on the item that interests you to see details on how to set up that peripheral.
5.2.1:
In most cases MEPIS Linux will add a camera automatically: 1. Switch on your camera in 'play' mode and connect it to your computer. 2. Click Start Menu > System > System Settings > Digital Camera, and you will usually see your camera icon already there. 3. If it is not there, you can add it manually by clicking the menu camera icon and finding your camera in the list. Retrieving images from your camera is easy: 1. Most cameras will be recognized by the Device Notifier in the System Tray on the right side of the panel, which will send up a notification that a new storage device has been connected, and it will carry the name of your camera. Click on that device, and then select "Open with Dolphin" from the items on the list. 2. Alternatively, click Start Menu > Graphics > Gwenview (Image Viewer), and you will see your camera listed under Places. 3. A third possibility is to install Digikam from the repos. It will likely recognize your camera and allow you to import images. 4. Some brands (Kodak, for example) or models sometimes present particular problems, and may require a manual edit of the rules governing how plug-in devices are handled. See the Wiki link below for Kodak cameras on how to do that.
5. Occasionally, it may be necessary to explore your camera's menu in order to change the connection type from PTP to USB. If your camera uses a multimedia card for storage, as many do, you may find it easiest to use a card reader (cheap if not built in) to connect to your USB port. Under MEPIS Linux, it will usually show up as an additional media device on your desktop, and you can read and write to it as if it were a hard or floppy disk.
Troubleshooting
Make sure your user-id appears in the camera group (create it if necessary) using Start Menu > System > KUser. If your camera does not appear, check to see if it is on the USB device list linked below. Google for the keywords "gphoto2 YourCameraMake YourCameraModel". Look for a changelog that includes your model. Check the version of the changelog and compare it to the output of typing this into a terminal: gphoto2 --version
You may need a new version of gphoto2 if the older version of the program does not recognize the camera. See whether one is available from MEPIS Repositories or search the MEPIS Community Forum (see Links & Guides). See Section 7.3: Other install methods: source code if you need to compile it yourself.
Thisispage31of106
5.2.2:
See also Section 5.5: Display
In most cases, the monitor will be recognized by MEPIS Linux when the LiveDVD is booted, and the appropriate driver will be included when the OS is installed on the hard drive.
Changing monitors
1. Shutdown the entire system and disconnect the power. 2. Unplug the monitor. 3. Plug in new monitor and reconnect the power to the computer. 4. When you reboot, the system will usually recognize and configure your new monitor correctly.
Troubleshooting
Consult Section 5.5 Display on how to change drivers or resolution.
http://localhost:631/
This will present you with the CUPS (Common Unix Printing System) interface, where you can click on "Adding Printers and Classes" at the top of the middle column, then "Add Printer" on the following page.
Troubleshooting
MEPIS Wiki: Printer help: http://www.mepis.org/docs/en/index.php? title=Hardware#Printers MEPIS Wiki: Canon ixxx printer drivers http://www.mepis.org/docs/en/index.php?title= Install_Canon_ixxx_Printer_Drivers MEPIS Wiki: Install Brother printer drivers: http://www.mepis.org/docs/en/index.php?title= Install_Brother_Printer_Drivers CUPS Mini-Tutorial: http://dev.linuxfoundation.org/~till/printing-
Thisispage32of106
tutorial/tut.html
5.2.4:
Introduction
Webcams have traditionally been tricky to configure with Linux. However, MEPIS Linux uses the latest Linux kernels, which include webcam drivers that make the process easier than before.
Basics
Here are the basic steps to take: First, plug in the webcam, and see if it works! Webcams using common drivers will often work just fine. To test whether it is working, try these options: Click Start Menu > Internet > Kopete (Instant Messenger), then click on the menu bar Settings > Configure... > Video. After a few seconds, you should see the webcam's view.
Install Skype, then click on Options >Video Devices, and click on the
Install camstream, then click File > Open Viewer and select your webcam. If one of those procedures does not work--and webcams often only work with certain applications--get the brand and model and USB ID of your webcam by opening a terminal and typing: lsusb
Output for the webcam will resemble this: Bus 001 Device 002: ID 046d:0870 Logitech, Inc. QuickCam Express
Google the device ID (bolded) to find out about its driver and Linux status. Check the webcam tables linked below for information and help. Search MEPIS community forum, then post your brand, model and device ID number (use lsusb) if still having trouble. NOTE: If looking to buy a new webcam, many users report consistent good luck with those supported by uvcvideo, and gspca, now supplied as kernel modules.
Thisispage33of106
5.2.5:
Introduction
ScannersaresupportedinLinuxbySANE(ScannerAccessNowEasy)whichisanapplication programming interface (API) that provides standardized access to any raster image scanner hardware (flatbed scanner, hand-held scanner, video- and still-cameras, frame-grabbers, etc.).
Basic steps
You can manage your scanner in MEPIS Linux with the KDE frontend Skanlite by following these steps: Click Start Menu > System > Synaptic Package Manager. Locate and install the skanlite package (see 7: Software Management) Click Start Menu > Graphics > Skanlite Kooka will check the system for scanners and present you with a list of what it has found. For details on how to use Skanlite, click the help icon to see the handbook. A good alternative for flatbed scanners involves installing kipi-plugins from the repos, which will give you a basic scanner under Start Menu > Graphics > Acquire Images.
Troubleshooting
Make sure your scanner is listed as supported by SANE by following the link below. Sometimes there is a conflict with another driver that leads to various odd behaviors. To check: 1. Click Start Menu > System > Dolphin as Su (File Manager as su), and provide the root password. 2. Type (or copy and paste) into the address bar: Demo Version - Evo Pdf Tools /etc/sane.d/dll.d/libsane-extras
3. The file will open. There should be a # symbol at the beginning of this linetocommentoutthedriver: geniusvp2
5.2.6:
Success with using a handheld device with MEPIS Linux depends on the handheld OS and hardware being used. Many users get around the complications of synching through the use of cloud applications such as Google Calendar or Dropbox.
Palm devices
PalmOS devices can be used on MEPIS Linux to sync handheld data to the Jpilot desktop application, though there is no longer any integration with KDE applications such as Calendar or
Thisispage34of106
Contacts.
Preliminaries
Make sure your handheld data are backed up before you start. Make sure your device info is correct, including spelling and capitalization If you are using a Palm device that has been used on another PC, you may have to restore the factory defaults (hard reset) Make sure that the modules you need are loaded: visor, usbserial and uhci_hcd or ehci_hcd. See the Wiki on handling modules, linked below.
Setup
The following technique works on MEPIS with many Palm devices. Using any installation method, install these packages: pilot-link jpilot libpisock9
Connect your Palm handheld to the computer Open Jpilot (Start Menu > Office) and click on File > Preferences > Settings, and select the appropriate Serial Port from the pull-down menu. When using a cradle On MEPIS, the choice of usb: will usually work. Press the hotsync button on the Palm device, then click the hotsync icon on the lower left in J-Pilot. It should start syncing. Sometimes, you may need to wait 5 seconds before pressing the JPilot icon. Once setup has worked, you can usually perform a hot sync simply by pressing the hot sync button on your handheld or its cradle.
Troubleshooting
Go through the preliminary steps again. Be sure that the modules are loaded. Plug your handheld directly into the PC (no hub).
Palm Pre
It has been reported that the Palm Pre can be synched with Google Contacts and Calendar; see the link below.
Other devices
At the present, synching a PDA that runs Windows Mobile is difficult. However, there are active projects working on this. Check the sites linked below for new developments. Likewise, there currently is no easy way to sync Nokia phones with the desktop. In both cases, you can use Bluetooth to move files and a cloud application for such things as contacts, calendars, etc.
Thisispage35of106
5.2.7:
With the latest kernels used by MEPIS Linux, using portable media players such as iPod, Creative Zen, or iRiver has become very easy. Two good graphical frontend applications available for managing songs and playlists with MP3 players are Amarok and Gtkpod Amarok Amarok is a KDE music manager not installed by default in MEPIS Linux, but easily available from the repos. Most MP3 and other media players will be autodetected by Amarok. 1. Plug in your device. 2. Device Notifier will pop up, listing the device. Click on the device icon to open it up in Dolphin. 3. Open Amarok, select your device, and click Connect. Gtkpod Gtkpod is a platform-independent application specializing in Apple's iPod. It supports the first to fifth generation devices, including the iPod mini, iPod Photo, iPod Shuffle, iPod nano, and iPod Video. It is available through Synaptic.
Troubleshooting
Check the application web sites linked below for detailed information.
General tab
Interface status This panel at the top of the screen displays the active interfaces and indicates their status following an obvious color code. If you hover your cursor over any interface you will see details on its current state. Interface Configuration Mode: The Automatic mode using NetworkManager is default on MEPIS Linux. It allows easy connection to access points through any active interface.
Thisispage36of106
The Manual mode may work better, especially when interface problems (e.g., with WPA encryption) show up in automatic mode. Check that box to activate it and, if necessary, then Apply. If the NetworkManager icon is in the system tray of the Panel at the bottom right of the screen, right-click it to quit so that it does not interfere with the manual mode. Driver Preferences: Select the Broadcom wl driver for newer cards with the chipset BCM4310 to 4312, BCM 4322, and BCM4328. Select the Broadcom b43 kernel drivers for older chipsets such as BCM4306. On the use of Ndiswrapper to allow the use of Windows drivers in Linux, see Section 5.6. The Broadcom drivers may interfere with each other, so you should uncheck the one that you are not using. Similarly, ndiswrapper should not be used if you are relying on a kernel module, and vice versa. Check the box for the ipv6 driver (the next-generation Internet Protocol version) if you need it for a particular use. Since it can slow down connections, it is disabled by default. Configure Domain Name Service Source: allows you to adjust how DNS is set. Network Control: permits restarting the network when changes have been made. In some cases, you may have to reboot for the changes to take effect.
Wireless tab
If you are using wireless for internet access, note which interface (e.g. wlan0) you're using. Enter the name of your network (SSID), if you know it; you can also try any or default. To see what networks are available, click Scan Access Points. All found will show up in the SSID box along with an indication of their strength, and you can select the one you want. Rarely you may need to adjust the frequency (channel) in order to avoid conflict with other devices using the 2.4 GHz band. Select your encryption mode (see WEP and WPA), if any, and enter the key. Click Apply.
Interfaces tab
Use the pull-down menu to get to your interface, then click Start at boot. If you don't know which interface name you should use, open a terminal, become root, and type:
Uncheck Start at boot for any other interfaces you will not be using. Check the Start/Restart on Apply box and then Apply at the bottom to quickly restart the interface. If you need to, you can configure static IP settings. Click Apply then OK. You may have to reboot for the changes to take effect, though usually that is not necessary. On the LiveDVD, go back instead to the General tab and click Stop Network, then Re/Start Network.
Troubleshooting tab
Hardware Clicking on Scan hardware will return a detailed description of your network cards and chipsets. Be sure to report this information when seeking help. Associated drivers Linux drivers. Any drivers associated with your wireless hardware will be listed here. Windows drivers. This panel allows you to see associated Windows drivers for use with Ndiswrapper, as well as to add or remove a driver, or even to blacklist Ndiswrapper if it is interfering with a Linux driver you want to use.
Diagnosis tab
This tab provides easy access to network diagnostic problems using well-established tools. Ping is used to send small data packets to another network host as a basic test for connectivity. It will test your connection to any IP address or hostname you give it; try something like www.yahoo.com to see how it works. Ten packets is often enough, but you can select any number by using the arrows. Consult the MEPIS Wiki link in the Links and Guides section on how to read and use the output. Traceroute shows you the route over the network between two systems, listing all
Thisispage37of106
the intermediate routers a connection must pass through ("hops") to get to its destination. It can help you determine why your connections to a given server might be poor, and can often help you figure out where exactly the problem is. Try something like www.yahoo.com to see how it works. Ten hops is often enough, but you can select any number by using the arrows. Consult the MEPIS Wiki in the Links and Guides section on how to read and use the output.
Thisispage38of106
MEPIS Wiki: WEP: http://www.mepis.org/docs/en/index.php?title=Wep MEPIS Wiki: WPA: http://www.mepis.org/docs/en/index.php?title=WPA MEPIS Wiki: OnTheGo: http://www.mepis.org/docs/en/index.php? title=Onthego
5.4:
Introduction
GRUB bootloader
GRUB is the default boot loader used by MEPIS Linux. A boot loader is software that tells your computer where to find operating systems to boot. When you start your computer, GRUB will provide you with a menu of choices. It is a very powerful boot loader that can load a wide variety of free operating systems, as well as proprietary operating systems with an indirect boot technique known as chainloading.
Overview
The typical default GRUB screen in MEPIS Linux shows 3 kernel entries for MEPIS ("stanzas" that start with title), any other detected OS, and a MEMTEST entry. For a dual_boot on a single hard drive with Windows XP installed in the first partition (named sda1 in MEPIS Linux, see Section 3.5), it looks something like this:
timeout 10 color cyan/blue white/blue foreground ffffff background 0639a1 gfxmenu /boot/grub/message title MEPIS at sda2, newest kernel root (hd0,1) kernel /boot/vmlinuz root=/dev/sda2 nomce quiet splash vga=791 boot
title MEPIS at sda2, previous kernel (if any) root (hd0,1) kernel /boot/vmlinuz.old root=/dev/sda2 nomce quiet splash vga=791 boot title MEPIS at sda2, kernel 2.6.32-1-mepis-smp root (hd0,1) kernel /boot/vmlinuz-2.6.32-1-mepis-smp root=/dev/sda2 boot title Microsoft Windows XP Professional at sda1 rootnoverify (hd0,0) chainloader +1 title MEMTEST kernel /boot/memtest86+.bin
Three kernel entries are listed for technical reasons; details in the Wiki discussion of GRUB under Links and Guides below. The final entry, Memtest is a thorough, stand-alone memory test for all Intel or AMD-based systems. It writes a series of test patterns to every memory address, then reads back the data written and compares it for errors..
Customizing GRUB
After successfully installing a dual-boot system, many people want to adapt it to their environment. Warning: making mistakes in editing GRUB configuration may render your system unbootable. To recover from this situation see Section 5.3.2 for 'Repair System Boot'.
Thisispage39of106
2. Click Ctrl-L to open the navigation bar, and type /boot/grub/menu.lst and hit return. This will open the configuration file for GRUB (menu.lst) that you can now edit in KWrite, the default text editor. 3. The first line contains text similar to the following: timeout 10
This line determines the time, in seconds, during which the boot menu will be shown. Change the number on this line to the number of seconds you would like. Use 0 if you would not like the menu to be shown at all so that the default entry will be booted automatically. 4. Click File > Save to save your changes and then Exit. Your changes should take effect the next time you restart your computer.
Change the variable nto0tobootfromthefirstentryinthemenu,1for the second, and so forth. Rearrange the stanzas Highlight the stanza for the OS you want to boot by default Cut and paste it into the first title position. Configure GRUB to default to whichever OS you booted previously. For details, check the Wiki entry on Customizing GRUB in Links and Guides below. Whichever method you choose, save the file and exit when you are done. The changes will take effect the next time the computer boots.
5.5:
The Black Screen
Display
Occasionally it may happen that when you boot up, you end up looking at an empty black screen that may have a blinking cursor in the corner. This represents a failure to start X, the windows system used by Linux. Possibilities and solutions for this failure include:
Thisispage40of106
Wrong graphic driver. This problem can occur when using the LiveDVD or LiveUSB, when you install a new monitor or with a new graphic card. It can be corrected by changing the driver, see below. Incorrect resolution. Normally, the resolution is configured automatically, but it can fail. Try adding the cheatcode video=followed by your monitor's proper resolution (e.g., video=1280x1024). Driver not compiled. This problem happens every time a new kernel or an updated Xorg is installed (if used). Use Ctrl-Alt-F1 to get to a login prompt, log in as your user, then become root and use sgfxi. Details in the Wiki. Refresh out of range.Solve this by adding the cheat code vsync=58-62. Kernel modeset issues. Add the cheat code radeon.modeset=0 or nvidia.modeset=0. Agp issues. Add the cheat code noagp. Unrecognized Intel chipset. Add the cheat code xdrvr=intel
Resolution
Resolution refers to the physical number of columns and rows of pixels creating the display (e.g.,19201200).In most cases, the resolution is correctly setby the kernel during installation (see Section 4.2) or when a new monitor is connected. If not, you can change it in the following ways: Click Start Menu > System > More Applications > KRandRTray to get an applet in the System Tray that you can use to adjust resolution and other values. This is particularly useful for laptops. Click Start Menu > System > System Settings > Display and Monitor. Use the pull-down menu to set the correct values. For Nvidia cards, you can install the package nvidia-settings that will give you a graphic tool that you can use to alter settings as root with the command kdesu nvidia-settings
In difficult situations, it is possible to manually alter the configuration file /etc/X11/xorg.conf. Always back up the file before you change it, and check the Wiki and the Forum for help about specifying the use of that file.
Graphic driver
If you are not satisfied with your display's performance, you may need to upgrade your graphic driver (make sure to first back up the file /etc/X11/xorg.conf, if used) in one of the following ways (see the Wiki for details):
Download directly from the manufacturer. This method will require you to select and download the driver for your system; for system info, use lspci|grep VGA
Here are driver websites for the three most popular brands--do a web search on "brandname linux driver" for others: Nvidia: http://www.nvidia.com/Download/index.aspx ATI: http://support.amd.com/ Intel: http://intellinuxgraphics.org/download.html Intel drivers must be compiled (Section 7.3), but Nvidia and ATI drivers are easily installed: Navigate in Dolphin to the folder where they were downloaded Right-click the file, select the Permissions tab, check "Is executable" Press F4 to get a command line and type (using the real name of the file) sh filename.run
Install additional driver packages from the repos. With an ATI chip, for instance, direct rendering requires the addition of the package libgl-mesa-glx. Graphic controls are available for Nvidia (nvidia-settings) and some ATI drivers Check the Wiki and Forum for details and help. Use a script called sgfxi. This script was developed by a Linux user named h2-1 for standard system upkeep for Debian, and currently supports ATI fglrx and Nvidia drivers. It also supports converting from or to xorg free drivers like ati, intel, or nv. To get the script, open Konsole, become root, and enter:
Once you have this installed, you can use it to easily change to the latest appropriate driver by opening a root konsole and typing sgfxi. Follow the simple on-screen directions. Note that this is not an official MEPIS product, so no guarantees can be made about its use.
Thisispage41of106
Adjusting fonts
Basic adjustment
1. Click Start Menu > Settings > System Settings > Application Appearance > Fonts 2. Adjust font size as needed. You can adjust them individually, or all at once (e.g., when a specific monitor makes them too large or too small) using the button Adjust All Fonts. 3. For help, press F1 to access the KDE Help Center.
Advanced adjustments
Firefox
1. Open Firefox and click on the menu bar Edit > Preferences >Content 2. Make any desired changes.
Opera
1. Open Opera and type in the navigation panel: about:config 2. Enter "font" in the search box, and make any desired changes.
GTK fonts
GTK+ is a multi-platform toolkit for creating graphical user interfaces. It is used in a variety of applications such as Synaptic. You can easily add a page for adjusting GTK Fonts to the System Settings: 1. Click Start Menu > System > Synaptic Package Manager. 2. Locate and install these packages: gtk-qt-engine gtk2-engines kde-config-gtk-style
3. In the System Settings you will now find a GTK Styles and Fonts entry where you can control the style and fonts used by GTK applications.
8.
Laptops
The action initiated by closing the lid of a laptop is set by default to Suspend to Ram after 15 minutes. You can alter that behavior by clicking Start Menu > Settings > System Settings > Power Management > Edit Profiles. There is a small tool for changing the display on the fly that is handy when using a laptop. Located by clicking Start Menu > System > KRandRTray (Screen Resize & Rotate). It sits in the system tray, and allows you to conveniently alter screen size, orientation or refresh rate.
Troubleshooting
If all normal attempts to configure your video have failed, or if things have gotten totally messed up, you can use a CLI tool called Xorg -configure that will examine your system and provide a new basic configuration file. Note that there is no user input or choice of screen resolution. Details in the Wiki entry, below. Troubleshooting links
Thisispage42of106
MEPIS Wiki: No graphical login: http://www.mepis.org/docs/en/index.php?title=No graphical login MEPIS Wiki: Reconfiguring Xorg.conf: http://www.mepis.org/docs/en/index.php? title=Xorg_-configure MEPIS Wiki: Manually editing X config file: http://www.mepis.org/docs/en/index.php? title=Monitor_and_Display_Setup Xorg.conf editing basics: http://www.linux.com/archive/feed/118108
5.6:
Introduction
Network
AcomputernetworkissimplydefinedasAconnectionoftwoormorecomputerssothattheycan shareresources.Resourcesareintheformofhardware(i.e.,printers),software,data,Internet connection, etc. Setting up a home network is a fairly straightforward task. But it is a good idea to arm yourself with a little knowledge to make things easier, as well as safer (from a security point of view). See Links and Guides below for background information.
We will be dealing with the various methods of internet access separately in subsequent sections, but all of them can be managed in MEPIS in one convenient location by clicking Start Menu > Settings > System Settings > Network Settings.
Overview
The discussion of networking breaks up into five areas: 5.6.1: Wired access 5.6.1: Wireless access 5.6.2: Firewalls 5.6.3: File sharing 5.6.4: VPN and Remote desktop
5.6.1.1:
HTML in Header and Footer Demo
Thisispage43of106
MEPIS Linux typically picks up wired internet access upon boot without much problem.
ifconfig -a
It is highly recommended that you have a firewall (see Section 5.6.2) running if you are connecting directly to the Internet with your PC! If you are running a stand-alone/external firewall, most of which will run DHCP by default, simply connect to the router/hub/switch and your machine should autoconfigure via DHCP.
ADSL or PPPoE
If you use ADSL or PPPoE, connecting to the internet is easy in MEPIS Linux. Click Start Menu > Settings > System Settings > Network Settings, then the DSL tab. Click the Add... button and fill in the required information, checking to connect automatically if you want. NOTE: you may encounter problems when using a USB device to connect instead of going through a router. If that happens, plug the unit into the computer, open Konsole, and type:
dmesg | tail
Post a message on Forum with the output to get some help in finding the driver you need.
Dial-Up
If you use a dialup connection with your computer, you will use KPPP. Click Start Menu > Internet > KPPP (Internet Dial-Up Tool) to define an account, test that the modem is working, and dial your ISP. A wizard makes the process painless, but for configuration details you can consult the KPPP Handbook in Links and Guides.
On the Device tab you will need to set up the serial information. Accepting the default /dev/modem may work, but you might need to try another interface. These are the Linux equivalents of the COM portsunderMSDOSandMSWindows: COM 1 - /dev/ttyS0 COM 2 - /dev/ttyS1 COM 3 - /dev/ttyS2 COM 4 - /dev/ttyS3 NOTE: For some users, KPPP does not work correctly in MEPIS Linux. Consult the KPPP section of the MEPIS Wiki linked below for solutions that users have found. If you continue to have difficulties, you should install gnome-ppp and try connecting with that application instead.
ifdown interface - the opposite of ifup. iwconfig - wireless network connection utility. Full documentation can be found by typing man:iwconfig into the Dolphin Location bar . For example: iwconfig - by itself, iwconfig will display your wireless status iwconfig eth0 essid any - this command connects eth0 to any AP in range
Thisispage44of106
iwconfig wlan0 essid foo - connects wlan0 to AP with essid "foo" iwconfig eth0 key off - clears out the WEP key iwconfig ath0 key 12345678901 - sets ath0's WEP key to 12345678901
iwlist - another wireless ethernet utility. In Dolphin, type the URL: man:iwlist for the Iwlist man page. Example of use: iwlist wlan0 scanning - shows properties of wireless networks within range of wlan0. iwlist ath0 bitrate - shows the current speed of communications on ath0.
Troubleshooting
Ethernet cards in MEPIS Linux are configured in the file /etc/network/interfaces. The file is actually very simple in format and syntax, and not hard to edit in the event that other tools fail. See documentation by typing "man:interfaces" into the address bar of Dolphin. Other troubleshooting help: MEPIS Wiki: Network interface varies: at http://www.mepis.org/docs MEPIS Wiki: Unstable connection: at http://www.mepis.org/docs
5.6.1.2:
MEPIS Linux comes preconfigured to autodetect a WiFi card, and in many cases your card will be found and set up. If not, see below for the basic steps for enabling wireless. There are three ways wireless can be supported in MEPIS: With a native driver that comes as part of the Linux kernel (example: ipw3945 for Intel). With a Windows driver using the application Ndiswrapper (supplied by default), which "wraps" your Windows driver so that it can be used in a Linux system (example: bcmwl5 for Broadcom). With a Windows driver using the commercial product Linuxant. Sometimes there is both a native Linux driver and a Windows driver available. You may want to compare them for speed and connectivity, and you may have to remove the one you are not using to prevent a conflict. For more information, see Links and Guides below. Wireless cards can be either internal or external. USB modems (wireless dongles) usually show up on the wlan interface, but if not then check others on the list. NOTE: The successful method varies for users because of the complicated interactions among the Linux kernel, wireless tools, and the local wireless card chipset and router.
3G modems
For wireless internet access using a 3G modem, please refer to the Debian Wiki's 3G pages linked at the bottom of the page.
Thisispage45of106
1. Click on the Network Manager icon in the system tray on the right side of the panel, and you will see something like this:
2. Click on the line that gives the name of an interface in the left panel (e.g., WLAN Interface) 3. Click on the interface that now shows up in the right panel 4. A config window opens up. The system will try to detect the correct encryption type (e.g. None, WEP or WPA), but you may need to verify if it is set correctly. Change if necessary, and fill in any required passwords. Check 'Automatically connect' at the top of the screen if you want your machine to connect without user intervention the next time you are within reach of this network. 5. When everything is done, click OK. 6. The KWallet system wizard opens up. Click Next 7. If you want to use the KDE wallet to store personal information, check the box and consult the KWallet discussion in Section 3.4, above. For now, it is easier if you leave it unchecked and click Finish; you can always set it up later. The connection will be made. 8. Examples of wireless interfaces include: eth, when a kernel module is being used and a wired interface exists wlan, when ndiswrapper is operating and often when using native drivers ra0 for cards with Ralink 2500 chipsets using the native driver. If an external device such as a dongle is being used, this may show up as rausb0 For a full list, consult the Debian Wiki on Wifi linked below. 9. If Network Manager does not see a particular network, open the MEPIS Network Assistant (see Section 5.3). On the General tab, click on the radio button for Manual (mnetwork) to deactivate Network Manager. Then click on the Troubleshooting tab. In the top panel, Hardware, click the Scan Hardware button to find the information about your chipset that you need to get help. The output will show all recognized interfaces. 10. If an interface is found: Search out any conflicts between drivers: 1) if you have a Broadcom chipset, use MEPIS Network Assistant to turn off all drivers except the one you want to use; 2) Atheros-based chipsets can cause more than one module to be loaded, preventing a proper connection. Try another connection manager such as Wicd or Ceni. Wicd (wicd-gtk is a nice graphical app) is a popular choice for many Linux distributions, and can be gotten from the MEPIS repositories. Ceni is in the Community Repository; it is particularly useful for hidden access points and other difficult situations. Please note that MEPIS can not guarantee the performance of these applications. 11. If no interface is found: Open a terminal and type:
lspci
or lsusb
Note the detailed information on your specific hardware, and look for more information about that from the Debian Wiki on Wifi, from the LinuxWireless site listed below, or on MEPIS community forum. Although we would like to use native drivers, in some cases you will want or need to use ndiswrapper and a Windows driver. This may be because you can't otherwise connect, or because the connection is better. See below for details. For some cards it is necessary to install firmware, the small programs and data structures that internally control the electronic components. MEPIS comes with quite a bit of firmware already available, but you may have to track down your particular need. Use the LinuxWireless website linked below. Open a terminal and type dmesg | grep net
and look for any error message. Report all relevant information in a post on MEPIS community forum, and ask for help
Native drivers
MEPIS Linux includes a large number of native wireless drivers among its kernel modules. The
Thisispage46of106
directions vary somewhat for each, and in some cases you will need to also obtain the firmware (small programs that internally control various electronic devices). Pease consult the MEPIS Wiki on native drivers, linked below.
Ndiswrapper
Ndiswrapper is an open source software driver "wrapper" that enables the use of Microsoft Windows drivers for wireless network devices in Linux. It comes pre-installed in MEPIS Linux, along with a number of the most common Windows drivers. Note that you MUST use a Windows 32-bit driver if you have MEPIS 32-bit edition and you MUST use a Windows 64-bit driver if you have MEPIS 64-bit edition. In general, Windows-XP drivers work much better than Vista drivers, so try the Windows-XP driver first. Here are the steps you should take to get wireless working with Ndiswrapper: Open up MEPIS Network Assistant (Start Menu > System). Click on the Troubleshooting tab, and click on "List Windows Drivers." Look for one of the drivers there that is associated with your hardware. If no driver is already associated, obtain the XP drivers for your card either from your legacy installation or from other sources (check the Wiki). Once you have placed the driver files (especially the *.inf and *.sys files) into a location on your computer, return to the Troubleshooting tab. Using the Remove Driver button, highlight and remove the existing drivers one at a time until none are left. Click on the Add Driver button, navigate to the location where you placed the XP driver files, highlight the file and click OK Click OK to close, and reboot your computer. If you are not connected when you reboot, go back to the MEPIS Network Assistant and make sure your network ESSID is entered on the Wireless tab. If not, enter it, click Apply, and restart the interface on the Interfaces tab. If you still have trouble, consult the Wiki or post the information described above in the last of the Basic Steps on MEPIS community forum.
5.6.2:
Introduction
Firewalls
A firewall is a device or application used to filter data packets from incoming or outgoing network traffic, usually based upon the IP address or type of service (literally, the port number). Firewall configurations sometimes need to be adjusted if you add a new network service or change the port of an existing network service on your computer. Although MEPIS Linux does not come with a software firewall preinstalled and configured, it is recommended you use one as a safety precaution, especially if you do not have a router. Firewalls are aimed at two groups of users: novice to intermediate users who are not experts in networking and security, and users who don't want the hassle of dealing with using scripts and parameters. See Links and Guides for more details.
Software
Most firewall programs available for MEPIS Linux are merely frontends for Netfilter/iptables, the network filtering module in newer Linux kernels. So, the real differences among different firewalls are
Thisispage47of106
the way the interface works and what options are available. Here are several alternatives to consider (details in Wiki): Firestarter Guarddog Kmyfirewall
Troubleshooting
MEPIS Wiki: Edit iptables manually: http://www.mepis.org/docs/en/index.php? title=Iptables
5.6.3:
Introduction
File sharing
MEPIS Linux can handle a large variety of networking protocols to make files and directories available to other computers on your network. Many people accustomed to Windows may be confused by the variety of file sharing protocols and not understand why there are so many when Windows simply allows you to "share" files without much rigamarole. Being open, though, Linux allows you to choose the protocol that best suits your needs.
Samba
ThisistheprotocolusedbyWindowsmachines(whichtheycallSMB:ServerMessageBlock).Samba is the most complete solution to share files with Windows machines on your network without making changestotheWindowsmachines.Sambasetsupnetworkshares(directoriesavailabletoother users) for chosen Linux directories and all contained subdirectories. These appear to Microsoft Windows users as normal Windows folders accessible via the network. It also offers some other services for interfacing with Windows networks, such as domain authentication, messaging services, and netbios name resolution. Finally, it provides an easy method of connecting Linux machines to each other and even to Mac machines. There are two basic aspects to sharing files on your network through Samba: first, setting up a samba server on the machine whose files you want to share, and then telling the server which directories it may share with other computers on your network.
If you are logged into a KDE session as root, go to: Start Menu > Settings > System Settings > Network and Connectivity > Sharing To avoid the risks of logging into a session as root: from your user account, open a Konsole window, or right-click on the desktop and choose run command from the pop-up menu. Enter this command:
Enter root's password when prompted. You should then have the window Samba KDE Control Module. You have tabbed windows for these configuration categories: Base Settings, Shares, Printers, Users, Advanced. For detailed information on how to configure your Samba Server, see the Mepis Wiki: http://www.mepis.org/docs/en/index.php?title=Configuring_SAMBA
Thisispage48of106
Other methods
NFS: This is the standard Unix protocol for sharing files. Many feel it is better than Samba for sharing files, and it can be used with Windows (2000 & XP) machines if you install Services for Unix or a third-party NFS client on them. For more information, see Links and Guides at the bottom of the page. Pros: More mature and stable than Samba for Linux / Unix servers. Simpler and less cumbersome than Samba. Cons: Windows clients require extra configuration. Terminology somewhat different from what Windows users are used Version - Evo Pdf Tools Demo to using. SSHFS: This is a pretty new protocol that requires some additional installation on Mepis (at least for the client). It is a mountable filesystem protocol implemented using SSH, so it is encrypted and only requires that the server be running SSH. For more information, see Links and Guides at the bottom of the page. Pros: Server only needs to be running SSHD: nothing else to set up. All transmissions encrypted for security. Cons: Requires extra setup on the client -- modules need to be compiled, permissions set up, folders mounted, etc. Hard to control what user has access to; anything they can access locally is available over the network. Cannot setup "anonymous" shares. (?) (At least not without a major security compromise). Forget about using this with Windows clients. FTP This is a very old protocol that still enjoys common use and support. It does not have all the features of other protocols and is somewhat insecure, but is a good choice if you are going to share files out to the internet and you have a wide variety of client OS's. For more information, see Links and Guides at the bottom of the page. Pros: Mature protocol, widely recognized. Most OS's (including Windows) come with ftp clients built in. (On windows, IE is a passable ftp client). Can be set up for anonymous sharing or secured sharing. Cons: Not very secure for use on the internet (passwords sent in plain text). Not very flexible for sharing out multiple unrelated folders. Setup can be a bit of a challenge for newbies. BitTorrent BitTorrent is a peer-to-peer file sharing (P2P) communications protocol for distributing large amounts of data widely without the original distributor incurring the entire costs of hardware, hosting and bandwidth resources. See Section 8.1: Bit-Torrent.
Thisispage49of106
Mepis Wiki: Samba: http://www.mepis.org/docs/en/index.php?title=SAMBA Wikipedia: Samba: http://en.wikipedia.org/wiki/Samba_(software) Samba project page: http://www.samba.org/ Wikipedia: NFS: http://en.wikipedia.org/wiki/Network_File_System_(protocol) Webmin home page: http://www.webmin.com/ MEPIS Wiki: SSHFS: http://www.mepis.org/docs/en/index.php?title=SSHFS MEPIS Wiki: FTP: http://www.mepis.org/docs/en/index.php?title=FTP
5.6.4:
Introduction
VPN (Virtual Private Network) and remote desktop connections are carried out in MEPIS Linux by utilities available from the standard repositories.
VPN
Install Kvpnc from the repositories to easily manage VPN connections in a graphic environment. Follow these steps to connect with Kvpnc: 1. Click Start Menu > Settings > System Settings > Network Settings > Network Connections, VPN tab. 2. Click Add and choose the VPN type from the pull-down menu. 3. Fill in the boxes on the Network Connection screen as appropriate. 4. Click OK to save the profile, then click the Apply button to connect. 5. To disconnect, right-click the icon in the System Tray and select 'Disconnect'. The command-line VPN client Vpnc is available from the repos and is compatible with Cisco EasyVPN. Open a terminal, become root, and simply enter:
Remote Desktop
Remote desktop connections can be managed by clicking Start Menu > Internet > KRDC (Remote Desktop Client). Follow these steps to connect: 1. Click Start Menu > Internet > KRDC. 2. Click the button in the middle of the application that corresponds to the connection you wish to make: VNC, RDP or local network. 3. Type the IP address of the remote computer in the address bar at the top and press Return. 4. You will be presented with a "Host Configuration" dialogue box with different options depending on the connection type. Edit the options as you wish or stick with the defaults. 5. You should now be connected to the remote server and be able to control it as if you were physically present at the remote site. All successful connections will be stored in the "History" in the left-hand panel.
Thisispage50of106
5.7:
See also Section 8.2: Multimedia
Sound Configuration
Introduction
Linux has many different ways of interacting with audio hardware. The main two are the Advanced Linux Sound Architecture (ALSA) and the Open Sound System (OSS). KDE builds on these low-level systems with its own Phonon API which all KDE multimedia programs use for playing sound. Fortunately, MEPIS chooses the most appropriate audio settings automatically and you do not need to worry about the details.
Basic configuration
KMix is the recommended way to adjust the details of your sound. 1. Open KMix by clicking Start Menu > Multimedia > KMix, or by clicking the speaker icon in the system tray (right side of the panel) and then on Mixer. 2. On the tab that may carry the name of your soundcard, make sure the Master volume (on the far left) is turned up. 3. Also, make sure PCM is turned up (the control with the blue squiggly line above it). You can hover your cursor over the icons to find out what they mean. 4. Make sure that the Mute checkbox next to the slider controls is not ticked. 5. On the menu bar click Settings >Configure Kmix and make certain that Restore volumes on login is checked. You can also check that your audio hardware is working correctly in Start Menu > Settings > System Settings > Multimedia. Click on the "Music" category in the left-hand panel and select a device in the right-hand panel (there may be more than one). Click "Test" to verify that each device is working correctly. You can determine the primary soundcard by adjusting its priority with the "Defer" button. NOTE: you cannot play an audio CD by clicking on the CD-ROM icon on the desktop. You must use an installed player (see Section 8.2: Multimedia).
libdvdcss2
This is available through Synaptic after checking the box next to this repository (see Section 7.2):
NOTE: The use of this package is of questionable legality in some countries, so please check your local restrictions before installing it.
System sounds
You can control KDE system-wide sound settings by following these steps: 1. Click Start Menu > Settings > System Settings > Application and System Notifications > Event Source 2. Click on any Event source to make any changes. If you don't want to hear the initial music notes when the desktop comes up, for instance, you would select KDE Workspace as the event source, then highlight Login and uncheck Play a sound below.
Troubleshooting
You can set up your sound driver by installing the package alsaconf from the Community repos. Then open a terminal, become root, and type:
alsaconf
This will start an automatic process to discover your sound card and install the correct driver.
Thisispage51of106
In order to troubleshoot any problems you will need to know what sound card you have. Open a terminal by clicking Start Menu > System > Konsole (Terminal), and enter this line:
Thiscommandasksthatalldevicesbelistedthatcontainthewordaudiointheirdescription,and the output will tell you your card manufacturer and model. Here is an example of output:
With this information, you can use the MEPIS Wiki to track down more information and help, or ask on the Forum. In rare cases, you may have to load a module for your card following the directions linked below. NOTE: Many of the drivers do not include the snd- prefix; you will need to add that to get the actual module name. MEPIS Wiki: Sound not working at all: http://www.mepis.org/docs/en/index.php? title=Sound_not_working MEPIS Wiki: Unsupported file types: at http://www.mepis.org/docs MEPIS Wiki: Loading a sound module: http://www.mepis.org/docs/en/index.php? title=Loading_a_module
5.8:
Bluetooth
Bluetooth is enabled in MEPIS Linux by default through the kernel, and its tools can be accessed most easily from the menu found by right-clicking the Bluetooth icon on the right side of the panel:
Input devices such as a keyboard or mouse will usually be picked up automatically as soon as you plug the receiver into the computer, and you should be able to just start using the device. If you experience problems, click Start Menu > System > KUser, provide root's password and check that your username is checked to belong to the Bluetooth group.
Thisispage52of106
5.9:
Background
Localization
MEPIS Linux can be altered to match your native country and language. Not all languages are currently available, but more are being developed.
Configuration
Here are the configuration steps you can take to localize your MEPIS Linux: Change the keyboard: click Start Menu > Settings > System Settings > Locale > Keyboard Layout, Layout tab: Enable keyboard layouts. Select the keyboard you want. Change the number and time settings: click Start Menu > System Settings > Locale, highlight Country/Locale in the left panel and select your preferences Change time format (12h or 24hr): Start Menu > System Settings > Locale > Country/Region & Language,Time & Dates tab. Get your clock to show the correct time: Right-click the digital clock > Digital Clock Settings > Time Zones. Type the name of your preferred timezone into the search field, or scroll the list to find your preferred timezone, then click on it to select it. Then click on the pull-down menu for Clock defaults and click on your preferred timezone > OK. Get spellchecker to use your language: install the myspell package for your language (e.g., myspell-en-au). Then click Start Menu > Settings > System Settings > Locale, click on Spell Checker in the left panel, and use the pull-down menu to set the system-wide preference. Get local weather info: install the package plasma-dataengines-yawp, which will provide additional feeds for various applications and widgets. Get language packs for major applications: open Synaptic, and search on "localization" to find and install language packs (e.g., kde-|10n-es) for the applications you use.
6:
Introduction
Although MEPIS Linux offers a complete set of graphical tools for installing, configuring, and using your system, the command line (also called the console, terminal, BASH, or shell) is still a useful and at times indispensible tool. Here are some common uses: Launch a GUI application to see its error output. Speed up system administration tasks. Configure or install advanced software applications. Execute multiple tasks quickly and easily. Troubleshoot hardware devices. The default program to run a terminal in a MEPIS Linux KDE desktop window is Konsole, which can be found at Start Menu > System > Konsole (Terminal). Some commands are only recognized for super user (root), while others may vary the output depending on user. To obtain temporary root permissions: open Konsole.
Thisispage53of106
type su. enter root's password You will recognize when Konsole is running with root privileges by looking at the prompt line right before the space where you type. Instead of a $, you will see a #; in addtion, the font color changes to red. NOTE: if you try to run as a regular user a command that requires root privileges such as hwinfo, you will receive an error message that the command was not found.
First steps
For more information on running Konsole for solving system problems, please refer to the topic Troubleshooting at the end of this section. Also, it is advisable to make backups of the files you are working on as a root user with the commands cp and mv (see below). Though console commands can be fairly complex, understanding the command line is just a matter of putting together simple things. To see how easy it can be, open Konsole and try a few basic commands. This will all make more sense if you do it as a tutorial exercise rather than just reading it. Let's start with a simple command: ls, which lists the contents of a directory. The basic command lists the contents of whatever directory you are currently in:
ls
That's a useful command, but it's just a few short columns of names printed across the screen. Suppose we want more information on the files in this directory. We can add a switch t o t h e command to make it print out more information. A switch is a modifier we append to a command to change its behavior. In this case, the switch we want is:
ls -l
As you can see on your own screen if you are following along, this switch provides more detailed information on the files in any directory. Of course, we might want to see the contents of another directory (without going there first). To do this, we add an argument to the command, specifying which file we want to look at. An argument is a value or reference we add to a command to target its operation. In this case:
ls -l /usr/bin/
By giving an argument of /usr/bin, we can list the contents of that directory, rather than the one where we currently are. There are a lot of files in /usr/bin! It would be nice if we could filter this output so that only entries that contained, say, the word "fire" would be listed. We can do this by piping the output of the ls command into another command, grep. The pipe,or|character(Caps+\),isusedtosendthe output of one command to the input of another. The command grep searches for the pattern you give it and returns all matches, so piping the output of the previous command to it filters the output.
Thanks to grep, we only see the lines of the output that contain the word "fire". Finally, suppose we want these results saved in a text file for use at a later time? When we issue commands, the output is usually directed to the console display; but we can redirect this output somewhere else, such as to a file, using the > (redirect) symbol:
This command now instructs your computer to make a detailed list of all the files that contain the word "fire" in a particular directory, and to create a text file containing that list, in this case named "FilesOfFire.txt". As you can see, the command line can be used to perform complex tasks very easily by combining simple commands in different ways.
Common commands
Here is a list of rudimentary terminal commands. For a complete reference, see the Links and Guides section.
Thisispage54of106
Filesystem navigation
cd /usr/share pwd Changescurrentdirectorytothegivenpath:/usr/share.With no argument, cd takes you to your home directory. Prints the current working directory path Lists the contents of the current directory. Use the -a switch to show hidden files as well, and the -l switch to show details on all files. Often combined with other terms: lsusb lists all the usb devices, lsmod all the modules, etc.
ls
File management
cp source.file destination.file mv source.file destination.file rm deleteme.file cat file.txt Copy a file to another filename or location. Use the -R switch ("recursive") to copy entire directories. Move a file or directory from one location to another. Also used to rename files or directories and to make a backup, for example before changing a critical file such as xorg.conf. Delete a file. Use the -R switch to delete a directory, and the -f switch ("force") if you don't want to be prompted to confirm each deletion. Prints the contents of a file on the screen. Only use on text files. Find a given string of characters in a given piece of text, and print the entire line it was on. Usually used with a pipe, e.g. cat somefile.txt | grep somestringwilldisplaythelinefromsomefile.txtthatcontainssomestring. To find a network usb card, for instance, you could type: lsusb | grep network. The grep command is case sensitive by default, use the -i switch to make it case-insensitive. More sophisticated file viewer, which features one screenful at a time, up and down scrolling, text searching, line numbers, and other things. Often used in a pipe, for instance cat somefile.txt | most. NOTE: this replaces less as the default pager in MEPIS Linux.
grep
most
Symbols
| The pipe symbol, used to send the output of one command into the input of another. The redirect symbol, used to send the output of a command into a file or device. Doubling the redirect symbol will cause the output to be added to the end of an existing file rather than replacing it. Adding the to Demo toampersand background,ofso Pdf Tools to wait for itit)to Version the Evoa that you don't have before - end command (with a space causes it run in the complete to issue the next command.
>
&
Troubleshooting
For most new Linux users, the command line is mainly used as a troubleshooting tool. Terminal commands give quick, detailed information that can be easily pasted into a forum post, search box, or email when seeking help on the web. It is strongly recommended that you keep this information at hand when asking for help. Being able to refer to your specific hardware configuration will not only speed up your process of obtaining help, but also it will let others offer you more accurate solutions. Here are some common troubleshooting commands. Some of them may not output information, or not as much information unless you are logged in as root. Shows a quick summary of detected internal hardware devices. If a devices shows as unknown, you usually have a driver issue. The -v switch causes more detailed information to be displayed. Lists attached usb devices. Shows the system log for the current session (i.e. since you last booted). The output is quite long, and usually this is piped through grep, less (similar to most) or tail (to see what happened most recently). For example, to find potential errors related to your network hardware, try dmesg | grep -i net. Shows the status of currently active network interfaces. See Section 5.6.1. Shows the status of your wireless network interface. See Section 5.6.1.2. Provides a real-time list of running processes and various statistics about them.
lspci lsusb
dmesg
For more detailed information on how to use a command, consult the command's man
Thisispage55of106
page. Shortformanual,manpagestypicallycontaindetailedinformationaboutswitches, arguments, and sometimes the inner workings of a command. Even GUI programs often have man pages, detailing available command line options. Manual pages are conveniently viewed in Dolphin by typing man:commandname into the address bar. In addition, by simply typing man:/ into Dolphin, you can browse the entire collection of man pages installed by MEPIS. The man page may also be read at the console with the command man commandname. By default, man pages are displayed in the terminal's most pager, meaning that only one screenful of the file is displayed at a time. Keep these tricks in mind to navigate the resulting screen: The space bar advances the screen. The letter b moves the screen backward. The letter q exits the help document.
7:
7.1: Introduction
Methods
Software Management
Synaptic is the recommended method for beginners to manage software packages, although other methods are also available and may be required for certain situations. 7.2: Synaptic Package Manager 7.3: Other methods
Packages
Software operations in MEPIS are accomplished through the Advanced Package Tool (APT) system. Software is provided in the form of a package: a discrete, non-executable bundle of data that includes instructions for your package manager about installation. They are stored on servers called repositories, and can be browsed, downloaded, and installed through special client software called a package manager. The recommended package manager for MEPIS is Synaptic, though the graphical utility Gdebi and the command-line utility apt-get are also included for those who prefer them. The majority of packages have one or more dependencies, meaning that they have one or more packages that must also be installed in order for them to work. The APT system is designed to automatically handle dependencies for you; in other words, when you try to install a package whose dependencies are not already installed, your APT package manager will automatically mark those dependencies for installation as well. It can happen that these dependencies can not be met, preventing the installation of a package.
Repositories
A P T repositories (repos) are much more than just web sites with downloadable software. The packages on repository sites are specially organized and indexed to be accessed through a package manager, rather than browsed directly. MEPIS Linux comes with a set of enabled repositories that offer you both security and choice. If you are new to MEPIS (and especially if you are new to Linux), it is recommended that in general you stick with the default repositories at first, with the exception of the multimedia repository that you will need to enable for proprietary-format codecs (see Section 8.2). For security reasons, these repositories are digitally signed, meaning that packages are authenticated with an encryption key to make sure they are authentic. If you install packages from non-Debian repos without the key, you will get a warning that they could not be authenticated. To get rid of this warning and make sure your installations are secure, you need to install any keys not installed by default; see if the repo contains a keyring package, or check its home page for instructions on adding the key. Most repositories should have a keyring package which installs the necessary keys (search keyring in Synaptic). Here are the most common: gnome-keyring debian-archive-keyring debian-multimedia-keyring
Thisispage56of106
The MEPIS Community has its own repository of packages that it builds and maintains. These packages are distinct from official MEPIS packages, and typically have been "backported" from "forward" Debian versions (testing or even experimental). To find out more about what is available, who the packagers are, and even how to get involved, follow the MEPIS Community Package Project link below. Repositories are most easily added, removed, or edited through Synaptic, though they can also be altered by hand by editing the file /etc/atp/sources.list in a root terminal. In Synaptic, click Settings > Repositories, then click the button New and add the information. Here, for instance, is how the settings look for the MEPIS Community repo:
At times it may be easier to directly alter the repository list in the /etc/apt/sources.list file. This can be edited as root with any text editor by backing up the existing file, editing the original file, and saving it. The same repository viewed above looks like this in the file:
Some repositories carry special labels: contrib, which depend on or are accessory to non-free packages. non-free, which do not meet the Debian free software guidelines (DFSG). security, which contain security-related updates only. backports, which contain packages from newer versions of Debian that have been backwards compiledforDebian6.0(Squeeze,theversionSimplyMEPISisbuiltwith)tokeepyourOS up-to-date. mepis, which contain the special packages that make MEPIS what it is.
Tips
Be sure to have only one package manager open at a time, or you will get an error message. MEPIS Linux is binary-compatible with DEBIAN Squeeze (codename for the current stable release). This means that software compiled to run on Squeeze should be able to be run without modification on MEPIS Linux. Adding repositories or installing packages designed for newer versions of Debian, Ubuntu, or Ubuntu derivatives (including SimplyMEPIS 6.x) may cause system instability. In addition to dependencies, packages can also specify suggests and recommends, visible in Synaptic by right-clicking the package name. Recommends,unlikedependencies,arenot absolutely required, but should be installed along with the package in most circumstances. Suggests are packages that enhance or compliment the package in question, but are not required. To see and/or mark suggested or recommended packages, right-click the package name and select mark suggested for install or mark recommended for install, respectively. If you plan to install software using methods other than APT (for instance, to get a newer version), make sure you purge any versions that have been installed using Synaptic (rightclick, Mark for Complete Removal). Since non-repository installations often put files in different locations than repository installations, failing to remove the repository version can cause two conflicting versions to be installed side-by-side.
Troubleshooting
Should you uninstall? Occasionally, conflicts in package dependencies can cause the APT system to require the uninstallation of a large number of important packages in order to install some other package. This is rare with the default configuration, but becomes increasingly likely as you add unsupported repositories. BE VERY ATTENTIVE whenever installing a package would require that others be removed! If a large number of packages are going to be removed, you may want to investigate another method of installing this application. Should you keep?: When upgrading, you will often be informed that a new configuration file is available for a certain package, and be asked whether you want to install the new version or keep your current version. If the package in question is from a MEPIS repository, it is recommended that youinstallthemaintainer'sversion Otherwise,answerkeepthecurrentversion(N), which is also the default choice. Here is an example of the dialog you would see when the repository list is being changed by MEPIS--notice that the answer at the end is y, telling Synaptic to
Thisispage57of106
7.2:
Introduction
Synaptic is a friendly, easy-to-use frontend (GUI) to the APT package management system. It is a graphical tool that allows you to install, remove, upgrade, downgrade, or get information on all the software packages available in the online repositories on your repository list. Synaptic can be launched from Start Menu > System > Synaptic Package Manager, or you can simply click on the Synaptic icon in the system tray, the Apt-notifier (yellow box). Note that your root password is required and, naturally, you will need to be connected to the Internet if you want to use the online repositories (as opposed to the DVD).
Thisispage58of106
NOTE: this pinning only affects the application Synaptic, not the actual list of application versions used by Apt, and will not work if you later use another upgrade means. For a universal pinning method, follow the example linked below.
Thisispage59of106
7.3:
Deb packages
The software packages installed through Synaptic (and APT behind it) are in a format called deb (shortforDebian,theLinuxdistributionthatdevisedAPT).Youcanmanuallyinstall downloaded deb packages using the graphical tool Gdebi or the command-line tool dpkg. These are simple tools to install local *.deb packages.
Pdf Tools
1. Navigate to the folder containing the deb package you want to install using Dolphin. 2. Hit F4 to open a terminal, and become root 3. Install the package with the command (substituting the real package name, of course): dpkg -i packagename.deb
4. If you are installing multiple packages at the same time, you can do it all at once using: dpkg -i *.deb
NOTE: In a shell command, the asterisk is a wild card in the argument. In this case it will cause theprogramtoapplythecommandtoanyfilewhosenameendswith.deb. 5. If required dependencies are not installed on your system already, you will get unmet dependencies errors as dpkg does not automatically take care of them. To correct these errors and finish the installation, run apt-get -f install
Apt-get will attempt to rectify the situation by either installing the needed dependencies (if they are available from the repositories), or removing your .deb files (if the dependencies cannot be installed).
Thisispage60of106
After you have installed alien on your system, you can use it to install an rpm package with this command (as root): alien -i packagename.rpm
That will place a deb file with the same name in the location of the rpm file that you can then install as described above. For more detailed information on alien, see the internet version of its man page in the Links and Guides section at the bottom of this page. Source code: Any open-source program can be compiled from the programmer's original source code if there is no other option. In ideal circumstances, this is actually a pretty simple operation, but sometimes you can run into errors that require a little more skill to sort through. Source is usually distributed as a tarball (tar.gz or tar.bz2 file). See the Links and Guides section for a tutorial on compiling programs. Miscellaneous: Many software developers package software in their own custom ways, usually distributed as tarballs or zip files. They may contain setup scripts, ready-to-run binaries,orbinaryinstallerprogramssimilartoWindowssetup.exeprograms.InLinux,such programsoftenendin.bin.GoogleEarth, for example, is often distributed this way. When in doubt, consult the installation instructions provided with the software. If you have to compile a package, consult the MEPIS Wiki article below.
8.1:
Web browsers
HTML in Header and Footer Demo
Internet (client)
Thisispage61of106
Two web browsers, Konqueror and Mozilla's Firefox, are installed with MEPIS Linux and available by clicking Start Menu > Internet. The Debian packagers also provide a rebranded variant of Firefox named IceWeasel, which is updated frequently. If coming from Windows, be sure to consult Section 3.2: Coming from Windows about migrating data. Firefox home page: http://www.mozilla.com/firefox/ KidZui easyFirefoxadd-on turns the best open-source web-browser into fun, kid-safe browser with over a million kids games, YouTube videos, and websites: https://addons.mozilla.org/en-US/firefox/addon/9689 Konqueror home page: http://www.konqueror.org/ IceWeasel Wikipedia page: http://en.wikipedia.org/wiki/Iceweasel Other common choices: http://www.mepis.org/docs/en/index.php? title=Linux_software#Browser
Email
An email client Kmail is installed with MEPIS Linux and available by clicking Start Menu > Internet. Its icon can be found on the left side of the panel. Thunderbird is another popular choice, using the package from the Mozilla site (check the Wiki for directions); or use Debian's rebranded Icedove, installable through the repos. If coming from Windows, be sure to consult Section 3.2: Coming from Windows about migrating data. Kmail home page: http://kontact.kde.org/kmail/ MEPIS Wiki: Kmail setup: http://www.mepis.org/docs/en/index.php?title=Kmail Thunderbird home page: http://www.mozilla.com/thunderbird/ Icedove Wikipedia page: http://en.wikipedia.org/wiki/Icedove Other common choices: http://www.mepis.org/docs/en/index.php? title=Linux_software#Email
Voice chat
Skype is available through Synaptic for MEPIS Linux, though the Linux version may lag behind the Windows version in terms of features and version numbering. Once installed, to start, click Start Menu > Internet > Skype. The latest version of Skype for Linux includes good video support, though suitable webcam drivers are required before this feature will work. Skype home page: http://www.skype.com/ Skype for Linux: http://www.skype.com/intl/en/get-skype/on-yourcomputer/linux/ Other common choices: http://www.mepis.org/docs/en/index.php? title=Linux_software#Voice_Chat
Video chat
No video chat program is installed by default in MEPIS Linux, although Kopete can transmit webcam images under certain protocols. Ekiga and aMSN are available for download from the standard repositories; Ekiga in particular seems to have very good hardware recognition, including audio. See also Skype above. Ekiga home page: http://www.gnomemeeting.org/ aMSN home page: http://www.amsn-project.net/index.php Other common choices: http://www.mepis.org/docs/en/index.php? title=Linux_software#Video_Chat
IRC
IRC (Internet Relay Chat) can be conducted in MEPIS Linux by setting up an IRC account in Kopete.
Thisispage62of106
MEPIS IRC channel: http://www.mepis.org/docs/en/index.php?title=IRC Wikipedia: IRC http://en.wikipedia.org/wiki/Internet_Relay_Chat Other common choices: http://www.mepis.org/docs/en/index.php? title=Linux_software#IRC
Usenet
The MEPIS Linux user has a couple of choices for participating in Usenet (USEr NETwork), the distributed internet discussion system. Thunderbird can be set up as a reader by clicking File > New... > Account, selecting Newsgroup account and filling in the server name. There is also the dedicated Pan Newsreader with a large feature set that can be installed through Synaptic. Pan home page: http://pan.rebelbase.com/ Wikipedia: Usenet http://en.wikipedia.org/wiki/Usenet
RSS
MEPIS Linux offers three easy ways to subscribe to RSS (Really Simple Syndication) feeds: In Firefox or IceWeasel, you can simply go to the page with the RSS and click Bookmarks > Subscribe to This Page and the application you have selected under Preferences will open. Other modern browsers behave similarly. There is also a large range of add-ons that can be installed in Firefox by clicking Tools > Add-ons. Thunderbird or IceDove can be set up for RSS feeds by clicking File > New > Account, selecting RSS News & Blogs and naming the account. Then right-click the new folder and select Manage Subscriptions. Finally, there is a dedicated desktop application called Akregator, part of the KDE office suite, which can be installed from the repos. The method you use will depend merely on personal preferences. Akregator home page: http://akregator.kde.org/ Wikipedia: RSS: http://en.wikipedia.org/wiki/RSS_(file_format) MEPIS Community RSS tutorial: http://www.mepiscommunity.org/en/tutorials
BitTorrent
BitTorrent, the peer-to-peer file sharing protocol, can be managed by the KDE application KTorrent which is installable through Synaptic for use with MEPIS Linux. Once you have downloaded a .torrent file from a tracker site, you simply need to double click it and KTorrent will ask you where to save the package and initiate the download. MEPIS Wiki: KTorrent: http://www.mepis.org/docs/en/index.php?title=KTorrent KTorrent home page: http://ktorrent.org/ Wikipedia: BitTorrent http://en.wikipedia.org/wiki/Bittorrent Other common choices: http://www.mepis.org/docs/en/index.php? title=Linux_software#File_Sharing
FTP
You have a number of choices for FTP transfer in MEPIS Linux (see also Bluetooth, below). Click Start Menu > Internet > Konqueror, details in the Konqueror Handbook. Click Start Menu > Internet > KFTPgrabber, details in the Handbook Install the Firefox extension called FireFTP. Install any other FTP client you like from the repos. FireFTP home page: http://fireftp.mozdev.org/ KFTPgrabber home page: http://www.kftp.org/ Wikipedia: FTP: http://en.wikipedia.org/wiki/Ftp Other common choices: http://www.mepis.org/docs/en/index.php? title=Linux_software#FTP
Bluetooth
See also Section 5.8: Bluetooth Bluetooth provides a means to connect and exchange information between personal devices such as mobile phones, laptops, digital cameras, etc., over a secure short-range radio frequency. Many basic tools (see Section 5.8) are available by right-clicking the Bluetooth icon on the right side of the panel and are mostly self-explanatory.
Thisispage63of106
Note: make sure that your user name is included in the Bluetooth group using KUser.
Object transfer
Various applications can use Bluetooth to pass objects (files, pictures, vCal entries, vCards, etc.) between devices, though some work may better than others. All rely on the Object Exchange protocol (OBEX), a kind of binary HTTP optimized for ad-hoc wireless links that is built in on many devices like PDAs and mobile phones. OBEX Client (kbtobexclient) is installed by default, and easily used from the host computer or the device: From the host computer: Pair the device with the host computer by right-clicking the Bluetooth icon, selecting Manage Devices, and following the prompts. Make sure the device is in discoverable mode. Right-click the Bluetooth icon and select Send file.... Follow the prompts to select the file and the device, then finish to send. From the device: Pair the device with the host computer if not already done. Initiate transfer on the device by the appropriate means. If the transfer fails for some reason, then right-click the Bluetooth icon and select Browse Devices Now you can use Dolphin in the the usual manner to drag files back and forth between the device to the host computer. For other options, see the MEPIS Wiki links listed below. MEPIS Wiki: Bluetooth: http://www.mepis.org/docs/en/index.php?title=Bluetooth Wikipedia: OBEX: http://en.wikipedia.org/wiki/OBEX MEPIS Wiki: Phones: http://www.mepis.org/docs/en/index.php?title=Phone
Ripping music
There are various ways to rip music, of which the easiest is to use K3B directly. Open up K3B. On the left hand side there will be a list of the drives available. Simply click on the Audio CD and wait until the files are listed. Highlight the ones you want to rip, right-click, and select Start Ripping. Choose the Destination Base Directory, and click Start Ripping. K3b handbook: at http://docs.kde.org Wikipedia: KIO: http://en.wikipedia.org/wiki/KIO Other common choices: http://www.mepis.org/docs/en/index.php? title=Linux_software#Music_Ripper
Composing/editing music
Audacity is an excellent cross-platform open-source program for recording and editing sounds. It does not come pre-installed with MEPIS Linux, but can be installed through Synaptic. It is easy to use and comes with excellent instructions. Audacity home page: http://audacity.sourceforge.net/ aRts simulates a complete modular analog synthesizer on your PC. MEPIS Linux includes t w o
Thisispage64of106
tools to work with this program found by clicking Start Menu > Multimedia > More Applications: Audio Filter Designer (aRts Builder) -- this program permits building custom layouts and configurations for audio mixers and similar applications. Sound Server Control (aRts Control Tool) -- brings together a number of utilitites for controlling and configuring aRts behavior. aRts home page: http://www.arts-project.org/>http://www.arts-project.org/ aRts handbook: http://www.arts-project.org/doc/handbook/index.html Other common choices: at http://www.mepis.org/docs
Organizing music
See Section 8.4: Home productivity
Video
Playing videos
MEPIS Linux comes with 2 video players: Kmplayer and Mplayer can be found under Start Menu > Multimedia. Mplayer: MPlayer is a movie player which runs on many systems and plays many popular media file types including those on DVDs and VCDs. Mplayer home page: http://www.mplayerhq.hu/design7/info.html KMplayer The KMPlayer is a video player plugin for Dolphin and basic frontend for KDE. KMplayer home page: http://kmplayer.kde.org/
Ripping videos
MEPIS Linux doesn't come with any video ripping software by default, but there are plenty of choices available for download. Acidrip and DVD::Rip are all you need to rip non-copyrighted DVDs to your hard disk. None of these programs will operate on DVDs that have encryption. You will need a package called libdvdcss2 t o w o r k w i t h e n c r y p t e d m e d i a , s e e Section 5.7: Sound configuration: Restricted formats.
Acidrip: AcidRip is a Gtk2::Perl application for ripping and encoding DVD's to DivX4 .avi files with a simple Graphical Interface. Acidrip runs on top of the excellent MEncoder. Acidrip home page: http://untrepid.com/acidrip/ dvd::rip: dvd::rip is a full featured DVD copy program written in Perl. It provides an easy to use but feature-rich Gtk+ GUI to control almost all aspects of the ripping and transcoding process. DVD::Rip home page: http://www.exit1.org/dvdrip/
Editing videos
Video editing can be very hard disk intensive and is best done with a reasonably powerful machine with lots of storage space. Kdenlive is installed by default and found by clicking Start Menu > Multimedia > Kdenlive (Video Editor). It is an intuitive and powerful multi-track video editor, including most recent video technologies. Kdenlive home page: http://www.kdenlive.org/ Kino is available for MEPIS Linux from the repos. It features excellent integration with IEEE-1394 for capture, VTR control, and recording back to the camera. Kino home page: http://www.kinodv.org/ Other common choices: http://www.mepis.org/docs/en/index.php?title=Linux_software#Video_Editor NOTE: To achieve a higher level of operability with video editing, install the following additional packages:
Thisispage65of106
Graphics
Viewing images
Dolphin has a built in previewer for images with adjustable thumbnail sizes. Select both the Icon and Preview buttons in the toolbar. Fine tune with the zoom buttons at the bottom of the window and settings in Dolphin >Settings >Configure Dolphin >General >Previews. MEPIS Wiki: Dolphin: http://www.mepis.org/docs/en/index.php?title=Dolphin Gwenview is good image application is available in MEPIS Linux: Start Menu > Graphics. It can be used as an image browser, for slide shows, to edit metadata, and for basic image manipulation. Gwenview home page: http://gwenview.sourceforge.net/ Digikam is installed by default: Start Menu > Graphics. It is a photo management tool similar to Google's Picasa that comes with a stand-alone photo viewer. To get the most out of Digikam and its plugins, install the following packages:
Editing images
GIMP (GNU Image Manipulation Program) is available to MEPIS Linux users under Start Menu > Graphics. Check whether the Community repo has a more recent version. It is similar in function to Adobe Photoshop. GIMP home page: http://www.gimp.org/ GIMP tutorials: http://www.gimp.org/tutorials/ Other common choices: http://www.mepis.org/docs/en/index.php?title= Linux_software#Image_Editors
Organizing images
See Section 8.4: Multimedia management
TV to PC
Watching television on a PC requires a good recent hardware configuration with sufficient processor speed and memory, software to process the signal for display and an adapter card that works with Linux. A number of programs are available and are listed below; which one works for a given tuner card is VERY DEPENDENT on which native driver(s) your card uses. Here is a partial list of available software, from basic to advanced, that you can install: Xawtvabasicapplicationwithviewerandcommandlineconfigurationtools. Kaffeineanapplicationwithmoreadvancedconfigurationcapabilities,andcanalsoread program guides) and record programs that you can schedule. MythTVacomplexsoftwarecollectionthatprovidesthefunctionsofapersonalvideo recorder. For details and other options, follow the MEPIS Wiki link below. MEPIS Wiki: TV: http://www.mepis.org/docs/en/index.php?title=Tv Xawtv homepage: http://linux.bytesex.org/xawtv/ Kaffeine homepage: http://kaffeine.kde.org/ MythTV homepage: http://en.wikipedia.org/wiki/Mythtv
8.3:
HTML in Header and Footer Demo
Office productivity
Thisispage66of106
Office suites
MEPIS Linux comes with access to a great free office suite called LibreOffice, which is the Linux equivalentandneardropinreplacementforMicrosoftOffice.ThesuiteisavailableunderStart Menu > Office > LibreOffice. LibreOffice supports for the .docx, .xlsx and .pptx file formats of Microsoft Office 2007 and above. Word Processor: LibreOffice Writer. An advanced word processor compatible with .doc files. Spreadsheet: LibreOffice Calc. An advanced spreadsheet compatible with .xls files. Presentation: LibreOffice Impress. Used for presentations, etc. Draw LibreOffice Draw. Used to create graphics and diagrams. Math: LibreOffice Math. Used for for mathematical equations. Base: LibreOffice Base. Used to create and manipulate databases. MEPIS Wiki: LibreOffice: http://www.mepis.org/docs/en/index.php?title=Libreoffice LibreOffice home page: http://www.libreoffice.org/ Other common choices: http://www.mepis.org/docs/en/index.php?title= Linux_software#Office_Productivity NOTE: The utility KCharSelect allows you to find unusual characters (foreign letters, symbols, etc.) and paste them to the clipboard for use in a word processor or other program. It is found by clicking Start Menu > Utilities > KCharSelect (Character selector).
Desktop publishing
LibreOffice can produce simple documents for publication, but for people who want more power and flexibility, more capable programs are available. Scribus is designed for flexible layout and typesetting, and for professional quality equipment, and a detailed published manual is available. Available through Synaptic. Scribus home page: http://www.scribus.net/
PDF documents
You can view your PDF files by clicking them to open them in the default Okular (see Section 3.4), available by clicking Start Menu > Office > Okular (Document Viewer). For other PDF operations such as copying text or images, merging, etc., follow the link to the MEPIS Wiki. Okular home page: http://okular.kde.org/ MEPIS Wiki: PDF: http://www.mepis.org/docs/en/index.php?title=Pdf Other common choices: http://www.mepis.org/docs/en/index.php? title=Linux_software#PDF
Contact Manager
MEPIS Linux has an excellent Personal Information Manager available from the repos called Kontact. It links your contacts with your email, calendar, newsreader, journal and notes all in a single window. Kontact home page: http://userbase.kde.org/Kontact
Thisispage67of106
Organizer
The organizer KOrganizer is the calendar and scheduling component of Kontact. It is available from the repos. The application fully integrates its components, facilitating many everyday operations with its features. KOrganizer home page: http://userbase.kde.org/KOrganizer
Business management
Powerful business programs are available for use in MEPIS Linux, though none is installed by default. If not available in Synaptic, they would have to be installed through other methods of software installation (see Section 7.3: Installing programs by other methods). Vtiger CRM: Enterprise-ready open-source CRM software mainly for small and medium businesses. Vtiger home page: http://www.vtiger.com/index.php Journyx: Employee time and expenses tracking for Projects, Billing, Payroll, etc. Free full unlimited use for up to 10 users (not open-source). Journyx home page: http://journyx.com/ Open-source customer relations (CRM) software: http://www.tech-faq.com/crmsoftware.shtml Other common choices: at http://www.mepis.org/docs
8.4:
See also 8.3: Office productivity
Home productivity
Money management
Open-source programs for managing personal finances are available that can import standard formats such as QIF. Gnucash: A double-entry book-keeping personal finance system similar to Quicken. Also install the package gnucash-docs for a handy tutorial. NOTE: in MEPIS Linux, you must install the package available from the Community repo to avoid dependency problems. Gnucash home page: http://www.gnucash.org Kmymoney: A personal finance manager similar to Microsoft Money, available for download through Synaptic as kmymoney2 Kmymoney2 home page: http://kmymoney2.sourceforge.net/index-home.html Other common choices: http://www.mepis.org/docs/en/index.php?title=Linux_software#Money_Management
Multimedia management
Photos
DigiKam is an excellent management tool for photos, allowing tagging, comments, and a variety of ways of organizing your collection. Digikam home page: http://www.digikam.org/ Other common choices: http://www.mepis.org/docs/en/index.php?title=Linux_software#Photo
Music
Amarok is a powerful music management tool available for MEPIS Linux by default. A detailed handbook is available off the Help menu. Amarok home page: http://amarok.kde.org/ Other common choices:
Thisispage68of106
http://www.mepis.org/docs/en/index.php?title=Linux_software#Music
List management
A good desktop sticky note application is available by default by clicking Start Menu > Utilities > More Applications > KNotes (Popup Notes). Another useful utility is QuickList, available from the repos.
Genealogy
GRAMPS (Genealogical Research and Analysis Management Programming System) is a free Software Project available from the repos. It includes a professional genealogy program and a Wiki. It can use data files exported from other programs exported in the GEDCOM format. GRAMPS home page: at http://www.gramps-project.org GRAMPS LiveDVD: http://www.gramps-project.org/wiki/index.php?title= Linux_Genealogy_CD Wikipedia: GEDCOM: http://en.wikipedia.org/wiki/GEDCOM
8.5:
Firewall
Guarddog and Firestarter can protect your system from external hackers while not being intrusive during normal use. Their interfaces are clear and offer many options, but most users will almost never have to open the applications or make changes. The most common need to open your firewall application comes when the user is required to permit a protocol through the firewall, for instance when installing a network printer. Check the software's handbook for details on when and how to do this.
MEPIS Wiki: Firestarter http://www.mepis.org/docs/en/index.php?title=Firestarter MEPIS Wiki: Guarddog http://www.mepis.org/docs/en/index.php?title=Guarddog Other common choices: http://www.mepis.org/docs/en/index.php? title=Linux_software#Firewall
Antivirus
MEPIS Linux does not currently require antivirus software because no viruses able to attack and damage a Linux system are in circulation. The purpose of installing an antivirus would be to assist with stopping Linux users from unknowingly passing virus-infected emails and other documents to Windows users, as well as to provide an open-source tool for protection in a dual-boot setup with Windows. KlamAV is available for MEPIS Linux from the repos. The program is inactive until it is opened by a user with root privileges. KlamAV home page: http://sourceforge.net/projects/klamav/
AntiRootkit
Rootkits are intended to hide software action from the operating system, and can be used malevolently. Here are two of the most common anti-rootkit applications, available through Synaptic: rkhunter. You can check if your system has been rootkitted by opening a terminal, becoming root, and entering the command: rkhunter --update rkhunter -c
Select options from the screen output, and run your check. Rkhunter home page: http://www.rootkit.nl/ chkrootkit. Another tool that locally checks for signs of a rootkit by running as root:
Thisispage69of106
./chkrootkit
Password protection
Passwords are protected in MEPIS Linux by the use of KDE Wallet, which is enabled by default. To change KDE Wallet's behavior, click Start Menu > Settings > System Settings > Account Details > KDE Wallet. MEPIS Wiki: KDEWallet: http://www.mepis.org/docs/en/index.php?title=KDEWallet KDE Wallet handbook: http://docs.kde.org/development/en/kdeutils/kwallet/index.html NOTE: it is important to set a strong password in the first place. A strong password: is not a word in your native language. is preferably random. should contain lower and UPPER case. should include letters, numbers and preferably special signs, e.g. %@^&. should contain at least 7-8 characters.
Encryption
File or folder encryption is made possible by KGpg, available by clicking Start Menu > Utilities > KGpg (Encryption Tool). This utility is also integrated with Dolphin, so that a file or folder may be encrypted by right-clicking it and selecting the desired feature under Actions. KGpg handbook: http://developer.kde.org/~kgpg/doc/
Privacy
User privacy is enabled system-wide by default in MEPIS Linux, so that items such as recent documents, web browsing history, etc., are cleared during shutdown. Some applications (e.g., Firefox/IceWeasel, Opera) have their own privacy controls as well. Web content filtering in Linux can be executed using a program such as Dansguardian, available through Synaptic. Dansguardian home page: http://dansguardian.org/ MEPIS Wiki: Dansguardian setup: http://www.mepis.org/docs/en/index.php? title=Dansguardian_setup
Vulnerability
Open-source vulnerability scanners and intrusion-detectors for servers are available for use with MEPIS Linux. Nessus: A popular vulnerability scanner available in an open-source version. Nessus home page: http://www.nessus.org/about/ Snort: An open-source network intrusion prevention and detection system Snort home page: http://www.snort.org/
Thisispage70of106
8.6:
See also Section 8.7: System
Utilities
NOTE: many more utilities are available for MEPIS than the few installed by default: open Synaptic, click Sections at the bottom of the left panel, and scroll down the list to select the category Utilities.
Accessibility
Various open-source utilities exist for MEPIS Linux users with disabilities. Here are two of the most commonly used, available from the repos. Kmag: Screen and cursor magnification is availble by installing KMag, which opens a floating window that magnifies everything around your cursor for those with a vision impairment, or for those that need that little more zoom. KMag home page: http://kmag.sourceforge.net/ KMouseTool: KMouseTool can be installed from the repos, and it will click the mouse for you, so you don't have to. KMouseTool FAQ: http://accessibility.kde.org/aids/kmousetool.php/ Other accessibility applications are available through Debian and KDE projects: KDE accessibility software: http://accessibility.kde.org/aids/ Debian accessibility software: http://www.debian.org/devel/debian-accessibility/
Desktop
The following packages for use on the desktop can be found under Start Menu > Utilities. Klipper (Clipboard Tool): A clipboard tool that docks into the system tray and keeps a record of items you copy to the clipboard, as well as offering a few additional features like the ability to open a web page. Klipper overview: http://userbase.kde.org/Klipper KCalc (Scientific Calculator): A calculator for the KDE Desktop that can be used in simple or scientific mode. KCalc home page: http://docs.kde.org/applications/utilities/kcalc/
Notes is an easy way to create sticky notes for the desktop. It is a widget that can be installed in the usual way (see Section 3.3). Other KDE Desktop applications: http://www.kde-apps.org/
Printing
HTML in Header and Footer Demo
Thisispage71of106
If you have a HP printer, there is a utility package available for MEPIS Linux called HPLIP Toolbox that can be installed from the repos. HPLIP Toolbox is an HP-developed solution for printing, scanning, and faxing with HP inkjet and laser-based printers in Linux. There is also a handy toolbox that sits in the System Tray called hplip-gui available through the repos. Hplip home page: http://hplip.sourceforge.net/
8.7:
See also Section 5: Configuration
System
GUI:
KRunner is a handy search tool, available simply by pressing Alt+F2. See section 5.3. KFind: This graphical search program can be reached by clicking Start Menu > Find Files/Folders. You can search by name, location, contents or properties. KFind handbook: open the application and click the Help button. Nepomuk/Strigi form a critical part of KDE4's approach to the concept of a Semantic Desktop. Nepomuk is a system component that classifies, organizes and presents data, while Strigi is a deep-indexed search daemon. Together they constitute a highly efficient and flexible search system. If not installed by default, they can be enabled by following the directions in the Wiki entry listed below. Nepomuk: http://userbase.kde.org/Nepomuk Semantic Desktop: Wikipedia: http://en.wikipedia.org/wiki/Semantic_desktop Enabling Nepomuk/Strigi: MEPIS Wiki: http://www.mepis.org/docs/en/index.php? title=Nepomuk-Strigi
CLI:
Welcome 1: Introduction 2: Getting MEPIS 3: Pre-Installation 4: Installation 5: Configuration 6: The Command Line 7: Software Management 8: Basic Use 9: Advanced Use 10: Under the Hood 11: More Resources 12: Glossary
willreturnanextremelylonglistwitheverysinglefilethathasthewordfirefoxinitsname or in its path. This command is best used when the exact file name is known. Manual page for locate: http://www.linuxcommand.org/man_pages/locate1.html whereis: Another command-line tool, installed by default. For each given pattern, whereis searches one or more databases of file names and displays the file names that contain the pattern, but it ignores paths so the return list is much shorter. For example, typing: whereis firefox
will return a much shorter list something like this: firefox: /usr/bin/firefox /etc/firefox /usr/lib/firefox \ /usr/X11R6/bin/firefox /usr/bin/X11/firefox \ /usr/share/firefox /usr/share/man/man1/firefox.1.gz
Manual page for whereis: http://www.linuxcommand.org/man_pages/whereis1.html which: Another command-line tool available by default. For the given pattern, which attempts to identify the executable. For example, typing: which firefox
Thisispage72of106
Basic list
One good place to get information about your hardware is Kinfocenter. Click Start Menu > System > KInfo Center (Info Center), and you will see the list of hardware in the left panel, and details in the right.
Detailed list
You can get more detailed information using a command-line program that comes pre-installed with MEPIS. Open a terminal and type as root hwinfo to see a detailed list of hardware. If you run the command as an ordinary user, you may get less information. You can copy and paste this list into a document. Or you can redirect the output to a plain text document by typing this as root: hwinfo > /home/username/Documents/hwlist
Screensavers
KDE has its own screensaver program known as KScreensaver, available by clicking Start Menu > System > System Settings > Display and Monitor. There is also a very creative screensaver k n o w n a s Xscreensaver, available through the repo. If you install the latter, you can install kscreensaver-xsavers to integrate it with System Settings administration location.
Terminal: : Press Ctrl-C, which will usually stop a program/command you started in a terminal session.
Thisispage73of106
Symbolic links
A symbolic link (also soft link or symlink) is a special kind of file that points to another file, much like a shortcut in Windows or an alias in Macintosh. A symbolic link does not contain any actual data (as a hard link does), it just points to another file somewhere in the system. There are two ways to create a symlink: Dolphin or the command line. Dolphin: Navigate to the file or folder (target of the link) that you want to use under another name, then use the split screen icon to open another Dolphin window and navigate to where you want the symlink to be located. Drag the target to the symlink location. A box will open with choices to Move Here, Copy Here, or Link Here. Select Link Here and you'redone!Nameithoweveryouwant,andyouhaveasymboliclinktothetargetfile which is still in its original location. Command line: Open a terminal and type: ln -s TargetFile LinkName
Be sure to include full path as well as file/folder names. The -s switch indicates that a symbolic link and not a hard link (that points directly to data) is being created.
Wikipedia: Symbolic link: http://en.wikipedia.org/wiki/Symlink The Seven Unix/Linux File Types: http://sblinux.org/pages/permissions01.html#filetypes
Battery Monitor: Kpowersave is a utility designed to assist with power management in laptops, but it works equally well with desktops and some Uninterruptible Power Supplies, enabling the system to shut down nicely when a low power condition is found. Install it from the repos. Kpowersave home page: http://sourceforge.net/projects/powersave/ Performance Monitor: KSysguard is the KDE Task Manager and Performance Monitor. It can be used to monitor system performance, memory usage and to shut down nonresponsive applications. KSysguard handbook: at http://userbase.kde.org/KSysGuard Ksensors: A graphical frontend to the lmsensors package for monitoring a motherboard, it allows you to access information from temperature and fan speed sensors. After installing it from the repos, you should run sensors-detect in a root terminal and answer yes to all prompts. Ksensors home page: http://ksensors.sourceforge.net/
Thisispage74of106
8.8:
Good practices
This section covers the good basic practices that MEPIS Linux users should follow to keep their system efficient and secure.
Backup
The most important practice is to back up your data and configuration files regularly, a process that is easy in MEPIS Linux. It is highly recommended that you back up to a different drive than the one your data is on! You can buy a new storage device, or use an old hard drive if you can find one.
Back up data:
Make sure you back up your data, including documents, graphics, music, and mail. By default, most of this is stored in your Home directory.
Disk cloning
As a precaution in case of complete hard disk failure, some users create a complete image of their harddrive, a technique called disk cloning or ghosting. In case a new harddrive must be installed, the user can simply restore the entire image to be back in operation in a few minutes. Open-source (e.g., Partimage, G4L) and proprietary (e.g., Acronis) ghosting software are available to carry out this procedure. Depending on the software used, you may have to carry this out from a separate drive or a LiveDVD. Cloning can also be used to make an identical working copy of your hard disk or partition to a second disk or partition with an equal or larger size than the original by using the command line tool dd. Unlike
Thisispage75of106
the cloning tools listed above, dd copies the hard disk or partition on a sector by sector basis, so everything is copied, including unused sectors. That being the case, it can take some time for larger drives. Wikipedia: Disk cloning: http://en.wikipedia.org/wiki/Disk_cloning MEPIS Wiki: Partimage: http://www.mepis.org/docs/en/index.php?title=Partimage G4L project page: http://sourceforge.net/projects/g4l MEPIS Wiki: G4L: http://www.mepis.org/docs/en/index.php?title=G4l Acronis home page: http://www.acronis.com/ LinuxQuestions.org: Learn the dd command at http://www.linuxquestions.org
Here is a list of services that you might not need (check!): spamassassin: e-mail spam filter. hpoj: HP Office Jet printer driver. cupsys: Common UNIX Printing System(tm). ntpdate: Set system time from internet NTP servers.
MEPIS Wiki: Service configuration: http://www.mepis.org/docs/en/index.php?title=Runlevel An introduction to services, runlevels, and rc.d scripts: http://www.linux.com/articles/114107
Disk maintenance
It is rare that you will need to do much disk maintenance compared to Windows, since Linux operating systems and the disk filesystems they utilize are designed differently. Still, there may come a moment when you want to check for partition/disk errors, something done in Windows with scandisk. To check for filesystem and disk read/write errors, go through the following steps: Click Start Menu > Settings > MEPIS System Assistant, and supply the root password. Click on the tab Repair Partition. When run from within the installed operating system, the Assistant will only test the drive. If you want to actually repair problems, you need to run the System Assistant after booting from the LiveDVD and choose bad blocks. The Assistant will ask you interactively if you want to repair problems it uncovers. NOTE:Theactofdefragmentingordefraggingadrive,sowellknowninWindows,isordinarily unneeded in MEPIS Linux as long as you have a standard Linux filesystem such as ext3, ext4 o r ReiserFS.
Upgrade precautions
These are some time-tested rules of thumb for new users of MEPIS Linux to avoid getting into trouble when upgrading their software: Always read the prompts carefully. Use the recommended URLs in your sources.list of software repositories. If upgrading in a terminal, use upgrade. Never use dist-upgrade or smart upgrade. When given the choice between the maintainer's config file and what's on your system, take the time to consider the options. If you have no other idea, then accept system changes coming from the MEPIS development source, but keep your current one for all others. Sometimes packages are held back because they need to install or upgrade additional packages to be upgraded. Other times they are held back because they will uninstall large portions of your system if you install them. If you can't figure out the reason, it is better to leave them alone.
Thisispage76of106
MEPIS Wiki: upgrade vs. dist-upgrade: http://www.mepis.org/docs/en/index.php? title=Upgrade_vs._dist-upgrade MEPIS Wiki: Sources.list: http://www.mepis.org/docs/en/index.php? title=Sources.list_MEPIS_8.0
8.9:
Games
See also Section9.3:WindowsprogramsunderMEPIS Because of space limitation, MEPIS Linux comes with only a few simple games, but many more are available. Browsing the extensive list of games available through Synaptic (click Sections >Games at the bottom of the left panel) or following the links below will bring up many other titles for your enjoyment.
Adventure Games
There are no Adventure Games installed by default. Here are a couple of popular ones you can install via Synaptic to get you started. Beneath A Steel Sky: A science-fiction thriller set in a bleak post-apocalyptic vision of the future. Beneath A Steel Sky home page: http://www.revolution.co.uk/_display.php?id=16 Kq: A console-style role playing game, similar to Final Fantasy. Kq home page: http://kqlives.sourceforge.net/
Arcade Games
There are many arcade games that can be downloaded via Synaptic. Chromium: A fast paced, arcade-style, top-scrolling space shooter. Chromium home page: http://www.reptilelabour.com/software/chromium/ Defendguin: A clone of Defender, where your mission is to defend little penguins. Defendguin home page: http://www.newbreedsoftware.com/defendguin/ Homepage Foobillard: A billard game with excellent graphics and sound. Foobillard home page: http://foobillard.sunsite.dk/ Frozen Bubble: Colored bubbles are frozen at the top of the playing screen. As the Ice Press descends, you must pop out groups of frozen bubbles before the Press reaches your shooter. Frozen Bubble home page: http://www.frozen-bubble.org/ Planet Penguin Racer: a fun racing game with your favourite penguin. Tuxracer home page: http://tuxracer.sourceforge.net/ Ri-li: A toy train game. Ri-li homepage: http://ri-li.sourceforge.net/ Supertux: A classic 2D jump'n run side-scrolling game in a style similar to the original SuperMario games. Supertux home page: http://supertux.lethargik.org/ Supertuxkart: A much improved version of tuxkart. Supertuxcart home page: http://supertuxkart.sourceforge.net/
Board Games
The classic Minesweeper is available by clicking Start Menu > Games > Tactics & Strategy > KMines (Minesweeper-like Game). There are other excellent board games available from the repos for you to try. KMahjongg: The classic Chinese tile game played as a solitaire puzzle. KMahjongg home page: http://games.kde.org/game.php?game=kmahjongg Shisen-Sho: A single-player tile game similar to Mahjongg except the board is rectangular and very large. Shisen-Sho handbook: help:/kshisen/index.html Here are some others to whet your appetite: Do'SSi Zo'la: The goal of the basic Isola game is to block the opponent by destroying the squares which surround him. Do'SSi Zo'la home page: http://dossizola.sourceforge.net/
Thisispage77of106
Card Games
You have an installed set of 12 solitaire card games available by clicking Start Menu > Games > Card Games > KPatience (Patience Card Game). Kpatience handbook: http://games.kde.org/game.php?game=kpat Here are some other fun card games available from the repos for MEPIS. Hearts (gnome-hearts):The classic hearts game. Gnome-hearts home page: http://www.jejik.com/gnome-hearts/ KPoker: A 5-card draw poker game from KDE. One player (like a poker-hand machine), or play against a computer opponent. KPoker home page: http://kpoker.sourceforge.net/ Pysol: Over two hundred card games from a single application. Pysol home page: http://www.pysol.org/
Lincity: AcloneoftheoriginalSimcityyoumustbuildandmaintainacityandkeepits people satisfied so that your population grows. Lincity home page: http://lincity.sourceforge.net/ Battle for Wesnoth: A highly-rated turn-based strategy game with a fantasy theme. Build your army and fight to regain the throne. Battle For Wesnoth home page: http://www.wesnoth.org/
Windows games
A number of Windows games can be played in MEPIS Linux by using a Windows emulator such as Cedega or DOSBox, or some may even run under Wine: see Section9.3:Windowsprograms under MEPIS for details.
8.10:
Kids stuff
While there is no kids stuff provided with the default MEPIS Linux installation besides a few games,
Thisispage78of106
there is a great deal available through Synaptic or from online resources. You can also search the repos for junior- to find packages associated with the DebianJr project (see Links and Guides). The following suggestions will give you a sense of what is available.
Education
Childsplay: suiteofeducationalgamesforyoungchildren. Childsplay: http://www.schoolsplay.org// GComprissuiteofeducationalgamesforchildrenaged2to10. GCompris home page: http://gcompris.net/-enWikipedia: GCompris: http://en.wikipedia.org/wiki/GCompris Linux Letters and Numbers (Lletters)fungameshelpchildrenlearntheirletters, numbers, and spelling. Linux Letters and Numbers home page: http://lln.sourceforge.net/ TuxTypetypingtutor.Kidstypeintheletterorwordonafallingfishandtuxeatsthe fish if they're right. TuxType home page: http://tuxtype.sourceforge.net/ TuxMatharithmeticlearninggame.SimilartotheclassicMissileCommandgame,except to shoot down the falling bombs kids must solve a mathematical problem and type in the answer. TuxMath home page: http://www.newbreedsoftware.com/tuxmath/
Desktop Fun
Xpenguinspenguinswalkaroundyourscreen.Canbecustomizedwithothercharacters likeLemmingsandPoohBear(needtoenableallowprogramstoruninrootwindowin KDE). Xpenguins home page: http://xpenguins.seul.org/ Onekoacat(neko)followsyourcursor(themouse)aroundthescreen.Canbe customized with a dog or other animal. How to use Oneko: at http://dailypackage.fedorabook.com PhunLandPhunisafreegamelike2Dphysicssandboxwhereyoucanplaywithphysics like never before. The playful synergy of science and art is novel, and makes Phun as educational as it is entertaining. How to use Phun: http://www.phunland.com/wiki/Home Xteddy putacuteteddyonyourdesktop.Alternativelyyoucanaddyourownimage. Xteddy homepage: http://staffwww.itn.liu.se/~stegu/xteddy/index.html
Security
KidZui easyFirefoxadd-on turns the best open-source web-browser into fun, kid-safe browser with over a million kids games, YouTube videos, and websites: https://addons.mozilla.org/en-US/firefox/addon/9689
Graphics
TuxPaintfunandeasytousedrawingprogramforyoungchildren.Soundeffectsanda cartoon character help let the user know what's going on, and keeps them entertained. TuxPaint home page: http://www.tuxpaint.org/ KtuberlingMrPotatoHeadtypegameforsmallchildren.ChoosefromaPotato, Penguin, or Underwater canvas/accessory sets. Ktuberling home page: http://opensource.bureau-cornavin.com/ktuberling/
8.11:
Google tools
Popular Google web-based tools can be integrated with your desktop in a number of ways: Gmail. Options include:
Thisispage79of106
checkGmail is an applet that sits in the system tray and permits you to manage email by right-clicking the icon. KMail and Thunderbird can be integrated with your Gmail account. Create a new IMAP account with the following settings: Incoming Mail (IMAP) Server Use SSL Port Outgoing Mail (SMTP) Server Use Authentication Use STARTTLS/SSL Port Account Name Email Address Password imap.gmail.com Yes 993 smtp.gmail.com Yes Yes 465 or 587 yourname@gmail.com yourname@gmail.com your Gmail password
Note that E-mail clients using IMAP generally leave messages on the server until the user explicitly deletes them, so that option may not be visible. Contacts. Options include: Thunderbird. There is an extension available that syncs the Address Book with Contacts when the app starts up. You can sync your Gmail contacts with your desktop so that they will be available in any KDE application: Install akonadi-kde-resource-google from the repos Log out and back in to restart KDE Click Start Menu > System > System Settings > Personal Information to get to the Configure KDE Resources page Use the pull-down menu to select Contacts, then click Add... Select Akonadi Address Books (Provides access to contact stored in Akonadi address book folders) Highlight Personal Contacts > Manage Address Book Sources > Add... Highlight Akonadi Google Contacts Resource > OK Provide account info > OK Click out to return to the Configure KDE Resources page Highlight the akonadi entry and then click the Use as Standard button if that is what you want. Then click Apply.
Gcal. Options include: Thunderbird. There is an extension available that mounts Google Calendar on a tab with read-write capability, and others that allow the Lightning plugin calendar to read and write to Gcal. You can sync your Google Calendar so that it will be available in any KDE application: Install akonadi-kde-resource-googledata from the repos Log out and back in to restart KDE Click Start Menu > System > System Settings > Personal Information to get to the Configure KDE Resources page Use the pull-down menu to select Calendar, then click Add... Click Manage Calendar Sources > Add... Highlight Akonadi Google Calendar Source > OK Provide account info > OK Click out to return to the Configure KDE Resources page Highlight and click the Use as Standard button if that is what you want. Now if you install KOrganizer, all your Gcal data will be available. For other calendar apps, you may need to point to the akonadi_gcal_resource file in /home/username/.kde/share/config/ Gdocs. Options include: LibreOffice has an extension called gdocs that helps directly upload a file to Google Docs. Google Earth. This app can be installed by direct download or through the repositories; check the Wiki for installation and setup details. Google Talk. This chat program can be used in Kopete when properly configured. See directions below.
Thisispage80of106
guides.net/en/content/view/178/26/ Thunderbird Gcal tab: https://addons.mozilla.org/af/thunderbird/addon/googlecalendar-tab/ MEPIS Wiki: Google Earth: http://www.mepis.org/docs/en/index.php? title=Googleearth Gmail Help: Configuring other mail clients: http://mail.google.com/support/bin/answer.py?hl=en&answer=78799 Google Talk: Help: http://www.google.com/support/talk/bin/answer.py? answer=57557
8.12:
antiX
The Users Manual for antiX MEPIS Linux can be found in the installed OS:
/usr/share/antiX/antiX-FAQ.html
9:
Advanced Use
In this section you will find introductions to some of the more common advanced uses of MEPIS Linux. Click on any section that interests you for details. 9.1: Internet (server) 9.2: Development 9.3:WindowsunderMEPISLinux 9.4: Virtual machines 9.5: Alternate Window Managers 9.6: Accessing other partitions 9.7: Scripts
9.1:
Server uses
Internet (Server)
There are many ways to use MEPIS Linux on a server. Click on any of the following items for details: MEPIS Wiki: DNS Server http://www.mepis.org/docs/en/index.php? title=DNS_Server MEPIS Wiki: Database server http://www.mepis.org/docs/en/index.php? title=Database_Server MEPIS Wiki: FTP server http://www.mepis.org/docs/en/index.php?title=FTP_Server MEPIS Wiki: KDE file server http://www.mepis.org/docs/en/index.php? title=KDE_file_server MEPIS Wiki: LAMP http://www.mepis.org/docs/en/index.php?title=LAMP MEPIS Wiki: LTSP server http://www.mepis.org/docs/en/index.php? title=LTSP_Server
Thisispage81of106
MEPIS Wiki: NX server http://www.mepis.org/docs/en/index.php?title=NX_Server MEPIS Wiki: POP3 server http://www.mepis.org/docs/en/index.php? title=POP3_Server MEPIS Wiki: Print server http://www.mepis.org/docs/en/index.php? title=Print_Server MEPIS Wiki: SMTP server http://www.mepis.org/docs/en/index.php? title=SMTP_Server MEPIS Wiki: VNC server http://www.mepis.org/docs/en/index.php? title=VNC_Server MEPIS Wiki: Web server http://www.mepis.org/docs/en/index.php? title=Web_Server
9.2:
Introduction
Development
If you are a programmer or interested in programming, MEPIS Linux is an excellent environment for you to work in. Although only rudimentary development software is provided in the default install, a wealth of tools is readily available from the repositories; many of these are the same tools used to create MEPIS Linux! To see what is available, open Synaptic, click on the Sections button in the lower left panel, then on Development.
Text Editors
GUI
CLI Vi: A command-line text editor; now improved as Vim. Vi Cheat Sheet: http://www.viemu.com/vi-vim-cheat-sheet.gif Vi & Vim home page: http://www.vim.org/ Nano: Another text editor for use in a terminal that has a number of nice features. Nano home page: http://www.nano-editor.org/ Other common choices: http://www.mepis.org/docs/en/index.php? title=Linux_software#Text_Editing Wikipedia: Comparison of text editors: http://en.wikipedia.org/wiki/Comparison_of_text_editors
Programming tools
C and C++
The GNU C compiler, gcc, is included in MEPIS Linux by default. The GNU C++ compiler is available from the repositories in the g++ package; a number of other C and C++ compilers are also available. The Kdevelop IDE, while it supports several languages, was written with C++ and C in mind. Install it from the repositories with the kdevelop package.
Java
MEPIS Linux ships with OpenJDK Java runtime; the full developer kit can be installed by installing the sun-java6-jdk package. The Java 5 runtime environment and development kit are also available, and the GNU gcj Java compiler. Newer versions for Linux are available from Sun's website. The popular Eclipse IDE is available from the repositories; it can be installed by simply selecting the
Thisispage82of106
eclipsepackage,buttherearemanyoptionaladdonpackagesforitaswell.The BeanShell interpreted Java environment is available from the repos, and the NetBeans IDE, available free from Sun, also works on MEPIS Linux.
Python
Python 2.6.x comes preinstalled on MEPIS Linux. You can launch the interactive interpreter by typing python at the console. Python 2.4 as well as a large selection of additional python libraries are also available from the repositories, where you will also find the eric, idle, and boa-constructor IDEs.
Mono (.NET)
Themonopackagesintherepositoryprovidea.NETcompatibleruntimeanddevelopment environment (for C#, ASP.NET, etc). Install the mono-2.0-devel package to get the runtime environment and development tools. A mono IDE monodevelop is also available.
Other tools
CVS is a version control utility available from the repositories in the cvs package. Although there are newer and more feature-packed version control utilities, CVS is mature and widely supported by other tools. Glade is a GUI designer for python or C++ applications using the GTK toolkit. It can be installed from the repositories as glade. Qt4-designer is a GUI designer made for KDE/QT applications and available from the repos.
Web Development
MEPIS Linux does not come with default applications already installed for designing web pages, but several are available from the repositories: Bluefish is a powerful editor targeted towards programmers and webdesigners, with many options to write websites, scripts and programming code. It can be installed with the bluefish package. KompoZer is a complete web authoring system that combines web file management and easy-to-use WYSIWYG (What You See Is What You Get) web page editing. Quanta Plus is a highly stable and feature-rich web development environment that starts with the best architectural foundations and is designed for efficient and natural use. It is in the Community Repositories and can be installed through Synaptic. For those looking to do web development (as opposed to web design), the repositories boast a wide array of web frameworks, services, API's and tools. Check the MEPIS Wiki for more information
Development utilities
Some handy development utilities are available for MEPIS Linux from the repos. Here are two of the more commonly used: KLinkStatus allows you to search internal and external links throughout your web site and view them in a hierarchical format or site tree. Simply point it to a single page and choose the depth to search. KRegExpEditor enables you to write and edit regular expressions graphically rather than using plain ASCII syntax. Kompare permits a graphic comparison between two texts, with easy tools for managing any differences. KFileReplace replaces some strings with others in a lot of files in a single operation.
Thisispage83of106
9.3:WindowsprogramsunderMEPISLinux
See also 9.4: Virtual machines
Introduction
There is a certain number of applications, both open-source and commercial, that will allow Windows applications to run under MEPIS Linux. They are referred to as emulators, meaning that they replicate the functions of Windows on a Linux platform. Many MS Office applications, games and other programs can be run using an emulator with varying degrees of success ranging from near-native speed and functionality to only basic performance.
Open-source
Wine is the primary open-source Windows emulator for MEPIS Linux. It is a kind of compatibility layer for running Windowsprograms,butdoesnotrequireMicrosoftWindowstoruntheapplications. New Wine versions are rapidly packaged by Community members and made available on the MEPIS Community forum and then in the Community Repository. Wine home page: http://www.winehq.org/ MEPIS Community Repository (CR) forum: http://forum.mepiscommunity.org/viewforum.php?f=78 MEPIS Community packages: http://www.mepiscommunity.org/en/node/273 MEPIS Wiki: Wine setup: http://www.mepis.org/docs/en/index.php? title=Wine_setup Application compatibility: http://appdb.winehq.org/ DOSBox creates a DOS-like environment intended for running MS-DOS-based programs, especially computer games. DOSBox home page: http://dosbox.sourceforge.net/ DOSBox Wiki: http://dosbox.sourceforge.net/wiki/
Commercial
CrossOver Office allows you to install many popular Windows productivity applications, plugins and games in Linux, without needing a Microsoft Operating System license. Supports Microsoft Word, Excel and PowerPoint (up to 2003) particularly well. CrossOver Linux home page: http://www.codeweavers.com/products/cxoffice/ Wikipedia: CrossOver: http://en.wikipedia.org/wiki/CrossOver Application compatibility: http://www.codeweavers.com/compatibility/browse/rank/ Cedega is designed to run DirectX and OpenGL games from the Microsoft Windows Platform under Linux. Popular games such as Elder Scrolls IV: Oblivion, Battlefield 2142, World of WarCraft, Madden 2007 and Civilization IV can be played on MEPIS Linux with this application. Cedega home page: http://www.cedega.com// MEPIS Wiki: Cedega: http://www.mepis.org/docs/en/index.php?title=Cedega Cedega game database: http://transgaming.org/gamesdb/ Community visual guides (include Cedega): http://www.mepisguides.com/
9.4:
See also 9.3 Emulators
Virtual machines
Thisispage84of106
Introduction
Virtual machine applications are a class of programs that simulate a "virtual computer" in memory, allowing you to install any operating system on the machine. It is useful for testing, running non-native applications, and providing users the feeling of having a machine of their own. Many MEPIS Linux users makeuseofvirtualmachinesoftwaretorunMicrosoftWindowsinawindowtoseamlesslyprovide access to software written for Windows on their desktop. It is also used for testing to avoid installation.
Applications
A number of virtual machine software applications for Linux exist, both open-source and proprietary. MEPIS makes it particularly easy to use VirtualBox, so we will focus on that here. For details and the most recent developments, see the MEPIS Wiki and MEPIS Community Virtual Machines/Emulators forum linked below. Here is an overview of the basic steps to set up and run VirtualBox: Prepare the machine -- You will need some packages before you can install and run VirtualBox. Open a terminal, become root, and type or paste in this command, which will pull in the necessary software: m-a prepare
Install VirtualBox -- This is most easily done from the repos through Synaptic. To have access to the most recent version, add this repository (see Section 7.1): deb http://download.virtualbox.org/virtualbox/debian squeeze contrib
It is also possible to download directly from the VirtualBox website. Be sure to reboot after installation. Create a Virtual Machine -- To create a virtual machine start VirtualBox, then click the New icon on the toolbar. You will need a Windows CD or a Linux ISO. Follow the wizard, accepting all suggested settings unless you know better--you can always change them later. Once the machine is set up, then you can select the mount point to be either the Host Drive or a Virtual CD/DVD Disk File (ISO). See the instructions below for making those assignments. Install Guest Additions -- Be sure to install VirtualBox GuestAdditions to your Guest OS by booting into the Guest OS, then clicking Devices >Install Guest Additions and pointing toward the VBoxGuestAdditions.iso that it will automatically locate. This will allow you to enable sharing files between Guest and Host and to adjust your display in various ways so that it suits your environment and habits.
Install Extension Pack -- For VirtualBox V4.0 and greater, you should download and install the Oracle VM VirtualBox Extension Pack from the Oracle web site (see Links and Guides). After the file is downloaded, navigate to it with Dolphin and click on the file's icon. The Extension Pack will install automatically. Select a Host Drive or Virtual CD/DVD Disk FileClickSettings>Storage,andadialog box will pop up where you will see in the middle a Storage Tree with an IDE Controller and a SATA Controller below it. It looks something like this:
By clicking on the CD/DVD Drive icon in the Storage Tree, you will see the CD/DVD Drive icon appear in the Attributes section in the right side of the window. Click on the CD/DVD Drive icon in the Attributes section to open a drop-down menu where you can assign the Host Drive or a Virtual CD/DVD disc file (ISO) to be mounted on the CD/DVD Drive. (You can select a different ISO file by clicking on Choose a Virtual CD/DVD disk file and navigating to the file.) Run the machine. The device you selected (ISO or CD/DVD) will be mounted when you start the virtual machine.
Thisispage85of106
When a new kernel is installed, the modules must be rebuilt (including for the Guest Additions). If the dkms package is installed, VirtualBox should automatically rebuild its kernel modules (drivers), provided the kernel headers and build environment are also installed. Excellent documentation is available through Help on the menu bar or as a PDF from the website.
9.5:
Thisispage86of106
9.6:
Overview
Immediately after installing MEPIS Linux you have access to the root filesystem. Everything you need to run MEPIS Linux is already mounted there. But you may need to take extra steps to access data elsewhere, or you might want to set up a partitioning schema that safely stores your data outside your /home directory partition. In cases like that, you may need to know how to mount partitions other than your root partition.
9.6.1:
Dynamic mounting
Dynamic mounting occurs when a device is plugged into the system. Most of the time, it will allow you to have access to the device's partition without any action on your part, usually through a window opened up by KDE. Thus, when you plug in a device (USB memory stick, camera, PDA, etc.), the window that pops up showing the contents of that device ultimate depends on dynamic mounting by udev. The following description udev outlines the mounting process (edited from Wikipedia): udev is a generic kernel device manager that runs as a daemon [background process] on a Linux system and listens for a new device being initialized (or a device being removed) in the system. The system provides a set of rules that match the properties of the discovered device. A matching rule will possibly name and create a device node and run configured programs to set-up and configure the device. udev rules can match on properties like the kernel subsystem, the kernel device name, the physical location of the device, or properties like the device's serial number. Rules can also request information from external programs to name a device or specify a custom name that will always be the same, regardless of the order devices are discovered by the system. Rarely, however, no matching occurs and the device is not made available to the system by KDE. This may be due to a hardware problem or a udev problem. It is easy to find out whether the device has been recognized by the system. First plug it in, then open a terminal and type:
dmesg | tail
If the hardware has been recognized, you should see its name and address in the output. That means that the problem lies at the next step, and you may have to modify udev (not recommended for newbies). Search first on your device ID number (e.g., ID 03f0:2112) to see what others have done. For guidance on writing udev rules, consult the how-to below. Wikipedia: Udev: http://en.wikipedia.org/wiki/Udev How to write udev rules: http://www.reactivated.net/writing_udev_rules.html
Thisispage87of106
9.6.2:
Manual mounting
If you need access only on an occasional basis to a partition that is not on a device dynamically mounted, such as a partition on your HDD with another OS, you can mount it manually. The file manager Dolphin makes it very easy to mount any partitions by dragging them to the Places panel on the left side, then simply clicking on them, as already described in Section 3.4.
KwikDisk
Another graphical application for mounting partitions is KwikDisk, a kicker applet that will show up in the system tray when started by clicking Start Menu > System > More Applications > KwikDisk (Removeable Media Utility). It has a variety of uses: It displays the available file devices (hard drive partitions, floppy and CD drives, etc.) along with information on their free space, type and mount point. It allows you to easily mount and unmount drives. Just click on the partition you want to mount (e.g. sda1, sdb1, sdb2, etc.). This will work for any Linux partition, and for Windows 98, 2000 and XP as well. You may have to provide root's password, depending on how permissions are set up. It has a menu entry for KDiskFree, a utility that measures available space. Simply click on the device that interests you to view the contents, and you will something like this (note KwikDisk icon at lower left corner):
9.6.3:
Automatic mounting
In order to set MEPIS to automatically mount another partition at boot time so that it will be accessible at all times, you will need to edit options in the /etc/fstab configuration file. Before we get into the details, let's go over the basic structure of every line in that file:
/dev/sda1
ext3
defaults,noatime
Each of the six elements of this entry contains information that must be presented in a specific order, as we can show with this table where the same entry is divided out into the standard categories:
[Device] /dev/sda1
Thisispage88of106
Now that the structure of the entries makes some sense, we can proceed to edit the file.
This will copy the current /etc/fstab into your /home/username/Backups directory under the namefstab.originalincaseyouneedtorestoreitlater.Torestoreityouwouldneedto issue this command as root: cp /home/username/Backups/fstab.original /etc/fstab
Note that in the first command, you copied a system file to your personal directory using the tildeashorthandforuserhomedirectory.Allcool.But the command to restore a system file needs to be much more precise. In addition to issuing the command as the root user, youneedtospecifytheuserhomedirectorymorestrictlyfromtherootpointofview. 2. To open up the current /etc/fstab in the text editor kwrite, with root privileges, type in konsole: kdesu kwrite /etc/fstab
3. Locate the line designating the partition you want to have mounted; the first column will refer to it as /dev/sdxn where x is a letter and n is a number. Highlight the entire line and cut it, then paste it into the upper part of the file. For example let's use /dev/sda3 as it originally appears: sysfs /sys sysfs defaults 0 0 # Dynamic entries below /dev/sda1 /mnt/sda1 ext2 noauto,users,exec 0 0 /dev/sda2 /mnt/sda2 auto noauto,users,exec 0 0 /dev/sda3 /mnt/sda3 auto noauto,users,exec 0 0
For the future, it might be good to document your change with a comment line so you know what is what. The following is an example of the new line in place, with a comment line added: sysfs /sys sysfs defaults 0 0 # automatically mounted partitions /dev/sda3 /mnt/sda3 auto noauto,users,exec 0 0 # Dynamic entries below /dev/sda1 /mnt/sda1 ext2 noauto,users,exec 0 0 /dev/sda2 /mnt/sda2 auto noauto,users,exec 0 0
4. VERY IMPORTANT: you must change the option in column 4 to auto! Do not alter anything in column 3, which may or may notalreadycontainthewordauto.Column3 refers to filesystem type, not to mounting options. The lines should now look similar to this, with only one word changed: sysfs /sys sysfs defaults 0 0 # automatically mounted partitions /dev/sda3 /mnt/sda3 auto auto,users,exec 0 0 # Dynamic entries below /dev/sda1 /mnt/sda1 ext2 noauto,users,exec 0 0 /dev/sda2 /mnt/sda2 auto noauto,users,exec 0 0
5. Check to see that the original line for the partition is missing from the bottom section of Dynamic entries, and exists only in the new, upper section. An error will result if the line designating any partition exists twice. 6. Save the file and exit KWrite. To put your changes into effect, open a terminal, become root, and type: mount -a
Now fstab will be parsed and all filesystems that are set to mount at boot will be immediately mounted if they are not already. You will find the partition mounted under /mnt.
Thisispage89of106
As before, back up the file before you start working on it. 3. Locate the line in the dynamic section for the partition you want to mount in /home. Here we will assume the original line looks like this, though yours may differ: /dev/hda1 /mnt/hda1 /mnt/hda1 ntfs-3g defaults,noatime 0 0
4. Cut it from the dynamic section and paste it above in the fixed section. Then change the mount location to your new directory: /dev/hda1 /home/UserName/XP/ ntfs-3g defaults,noatime 0 0
5. As before, if you see the word noauto in your particular entry, you should change it to auto. 6. Save and exit. Whenyoureboot,yourhda1partition'scontentsshouldshowupintheXP subdirectory in your /home directory. 7. After first boot, you may find that MEPIS has changed the ownership of the subdirectory mointpointtoroot.FormountinganNTFSpartitionthismaynotbeaproblem,asthe defaultNTFSmountoptionssetthegroupIDtousersandallowthatgrouprw permissions. If it is an ext3 or other Linux partition, you will not have write permission. So the user named "joany" would change the ownership back with the following CLI command, using Konsole: su [and give root password when prompted] chown -R joany:users /home/joany
Check to see that you have the correct user and group owner with: ls -l
or by checking your home directory in Dolphin using the Detailed List View mode. Once it's fixed, subsequent booting does not affect the ownership.
Troubleshooting
Windows FAT partition
Although Windows NTFS partitions (as used in Windows 2000 and later) usually present little problem, there is sometimes difficulty with the necessary system permissions to write or delete files on a Windows FAT partition (as in Windows 98). If this seems to be the case on your computer, you'll need to insert a step after Step 4 above: Inserted Step: setting permissions when mounting a VFAT partition Set the following additional mount options for a Windows FAT partition. Note that MEPIS should already have identified it as a vfat partition in the third column, so all your changes need only be in the fourth column (bolded below):
If you need to set something other than full read/write/execute permissions for everyone who logs into your MEPIS system, you will need to do more study before fine-tuning your mounting permissions. MEPIS Wiki: fstab: MEPIS Wiki: http://www.mepis.org/docs/en/index.php? title=Fstab Community Guide to fstab: http://sblinux.org/pages/fstab01.html Linking partitions to your /home directory http://sblinux.org/pages/symlink-home.html
Thisispage90of106
9.7:
Introduction
Scripts
A script is a simple text file that can be written directly from a keyboard, and consists of a logically sequenced series of operating system commands. The commands are handled one at a time by a command interpreter which in turn requests services from the operating system. The default command interpreter in MEPIS is Bash. The commands must be understandable to Bash, and command lists have been established for programming use. A shell script is the Linux counterpart of batch programs in the Windows world. Scripts are used throughout the Linux OS and applications that run on it as an economical method of executing multiple commands in an easily created and modified manner. During boot, for instance, many scripts are invoked to start up specific processes such as printing, networking, etc. Scripts are also used for automated processes, system administration, application extensions, user controls, etc. Finally, users of all kinds can employ scripts for their own purposes.
A simple script
Let's do a very simple (and famous) script to get the basic idea. Open the text editor KWrite (Start Menu > Utilities), and type: #!/bin/bash clear echo "Good morning, world!"
All scripts open with a shebang as in the first line: it is a combination of a number sign, an exclamation point, and the path to the command interpreter--here, Bash is the interpreter and it is found in the standard location for user applications. Save that file in your home directory with the name SimpleScript.sh. Right-click the file name, select Properties, and check "Is executable" on the Permissions tab. Open a terminal and type: sh /home/UserName/SimpleScript.sh
The line "Good morning, world!" will appear on your screen. This simple script doesn't do very much, but it does establish the principle that a simple text file can be used to send commands to control your system's behavior.
1 #!/bin/bash 2 # 3 # This Rdiff-Backup script backs up to a second hard drive 4 # It must be run as root in order to mount the second hard drive 5 6 # To restore files, issue the command: cp -a /mnt/sda1/username /home 7 # To restore, but not overwrite: 8 # cp -a -i --reply=no /mnt/sda1/username /home 9 10 # Mount the external devices 11 12 mount /dev/sdb1 13 mount /dev/sdb2 14 mount /dev/sdb3 15 16 # Execute the backup 17 18 rdiff-backup /home/newbie/Documents /mnt/sdb2/Documents 19 rdiff-backup /home/newbie/Music /mnt/sdb1/Music 20 rdiff-backup /home/newbie/Mail /mnt/sdb2/Mail
Thisispage91of106
21 22 23 24 25 26 27
rdiff-backup /home/newbie/Pictures /mnt/sdb3/Pictures # Unmount the external devices umount /dev/sdb1 umount /dev/sdb2 umount /dev/sdb3
Now let's look at this script's components: Lines 2-8: a number sign has been placed in front of these lines (called "commenting them out") to indicate to Bash that they are not part of the sequence of commands to be executed. Their purpose here is to provide anyone who looks at this script with information about such things as the script's origin, creator, purpose, and license (metadata). Line 10: good scripts separate the commands into clearly labelled procedural sections, bolded here and in lines 15 and 22. Lines 12-14: the three devices to be used for the backup have to first be mounted so they are available to the system. Lines 18-21: here bash is told to use the system script rdiff-backup to compare the original directories (sources) with the backup directories (targets), copy over the differences it finds, and keep a record of the changes. Lines 25-27: once the backup work is done, the external drives are unmounted from the system. Anyone who wanted to use such a script would have to carry out a few execution steps: 1. Copy the whole script. 2. Right-click the desktop and select Create New >Text file... 3. Give the file a name that makes sense (no spaces, though), and add the "sh" extension so you will recognize it is a script. For this example, you might select Backup_DocsMusicMailPictures.sh 4. Open the new text file and paste in the script. 5. Change any names, locations, etc. to what they are on your particular system. In the example above, you may well have different names and/or locations for the directories to be backed up, and different devices where they are supposed to go. 6. Save that script in a place you can easily find it when you need it, let's say you make a new directory /home/scripts for it. 7. Right-click the script, select Properties, click on the Permissions tab, and check the Is executable box and click OK. 8. When you are ready to backup, open a terminal and type: sh /home/scripts/Backup_DocsMusicMailPictures.sh
Hint: use the tab key to autocomplete the file name after you type the first few letters.
10:
10.0: Introduction
UserscomingfromMicrosoftWindowstypicallyfindalotofunfamiliarconcepts,andgetfrustrated trying to do things the way they are accustomed to doing them. This section will give you a conceptual overview of some basic aspects of MEPIS Linux, and how they differ from other systems to help ease your transition. MEPIS Linux ultimately inherits its fundamental design from Unix, an operating system that has been aroundinvariousformssince1970muchearlierthanMSWindows. MEPIS Linux is also mainly composed of free, open-source software (FOSS) (i.e. software that is distributed without restrictions on the use of its source code). The Unix heritage plus the open-source nature of MEPIS have a strong impact on its design.
Thisispage92of106
Unix provided the foundation for the development of Linux starting in 1991. As is well known, Linus Torvalds united his developing kernel with the free software framework of the GNU Project, started by Richard Stallman in 1984, and the resulting OS is often referred to as GNU-Linux. A user interface of some sort needs to serve for input and control. At its simplest, this interface is a command line, as in the original Unix and also in the original MS-DOS prior to MS-Windows, but today all the most popular Linux versions use a graphical user interface (GUI) that relies on the X Window System, a software system and protocol that provides the basic framework for graphical display. Finally, MEPIS builds directly on the highly popular Linux distribution called Debian, its direct upstream source of fundamental structures and features. Founded in 1993, Debian has become preeminent in areas such as package development, release protocol, organizational structure and commitment to free software. To the solid core provided by Debian's stable release, MEPIS adds user-friendly features such as a very simple installation tool, excellent hardware recognition, a set of configuration Assistants,andaLiveDVDframeworkallsupportedbyalivelyandknowledgeableCommunitythat contributes to MEPIS the artwork and documentation, as well as additional software packages.
10.1:
Orientation
Thisispage93of106
systems or the length of time to wait for default booting. /dev In this directory are special files that link to the various input/output devices on the system. Example: no file here is commonly accessed directly by users, except in CLI mounting commands. /etc This directory contains configuration files for the system such as as well as application configuration files. Example: The file /etc/fstab specifies mount points for additional filesystems on devices, partitions, etc. that can be configured for your optimal use. Example: display problems sometimes involve editing the file /etc/X11/xorg.conf. /home Here the user's personal directories (data and settings) reside. If there is more than one user, a separate subdirectory is set up for each. No user (except root) can read another user's home directory. The user's directory contains both hidden (where the filename is preceded by a dot) and visible files; hidden files can be revealed by clicking View >Show Hidden Files in Dolphin. Example: users typically organize their own files at first by using default directories such as Documents, Music, etc. Example: your Firefox profile is located in .mozilla/firefox /lib This directory contains shared object libraries (analogous to Windows DLL's) that are required at boot time. In particular, kernel modules will be found here, under /lib/modules. Example: no file here is commonly accessed by users. /media Files for removable media such as CDroms, floppy drives, and USB memory sticks are installed here when the media are automounted. Example: After dynamically mounting a peripheral device like a flash drive, you may access it here. /mnt Physical storage devices must be mounted here before they can be accessed. After drives or partitions are defined in the /etc/fstab file, then their filesystem is mounted here.
Example: Users can access drives and partitions mounted here. /opt This is the intended location of major third-party application subsystems installed by the user. Example: if you want to install Google Earth, this is where you place it. Some distros, including MEPIS, also place user-installed programs in /usr subdirectories. /root This is the home directory for the root (adminstrator) user. Note that this is not the sameas/thefilesystemroot. Example: no file here is commonly accessed by users, but files saved while logged in as the root user may be saved here. /sbin Programs are installed here if they are required by the system startup scripts but will notnormallyberunbyusers,otherthanrootinotherwords,systemadministrationutilities. Example: no file here is commonly accessed by users, but this is where files like modprobe and ifconfig are located. /tmpThisisthelocationoftemporaryfilesproducedbyprogramssuchascompilersas they run. In general, these are short-term temporary files, of use to a program only while it is running. Example: no file here is commonly accessed by users. /usr This directory contains many things for user applications, and is analogous in some ways totheWindowsdirectoryProgramFiles. Example: many executables are located in (/usr/bin) Example: documentation (/usr/docs) and configuration files, graphics and icons are in (/usr/share). /var This directory contains files that are constantly changing while Linux is running, e.g. logs, system mail and queued processes.
Thisispage94of106
Basic information
The default file permissions structure in Linux is fairly simple, but more than adequate for most situations. For each file or folder, there are three permissions that can be granted, and three entities (owner/creator, group, others/world) to which they are granted. The permissions are: Read permission means that data can be read from the file; it also means the file can be copied. If you don't have read permission for a directory you can't even see the names of files listed in it. Write permission means that the file or folder can be changed, appended, or deleted. For directories, it specifies whether a user can write to files in the directory. Execute permission means whether or not the user can run the file as a script or program. For directories, it determines whether or not the user can enter and make it the current working directory. Every file and folder acquires a single user designated as its owner when it is created on the system. (Note that if you move a file from another partition where it has a different owner, it will keep the original owner; but if you copy and paste it, it will be assigned to you.) It also has a single group designated as its group, by default the group to which the owner belongs. The permissions you grant to others affect everyone who isn't the owner or in the owning group.
Thisispage95of106
NOTE: For advanced users, there are additional special attributes beyond read/write/execute that can be set: sticky bit, SUID, and SGID. For more information, see Links and Guides for Section 10.2.
MUser
The MEPIS User Assistant is an easy way to add or delete a user. In addition, it can restore default values for groups and memberships.
KUser
KUser is part of KDE and can be reached by clicking Start Menu > System > KUser and supplying the root password. It allows detailed control of a Users account. The main screen has two tabs, one for users and the other for groups; above them sits a toolbar and on top a menu bar. Here are the icons on the toolbar:
Welcome 1: Introduction 2: Getting MEPIS 3: Pre-Installation 4: Installation 5: Configuration 6: The Command Line 7: Software Management 8: Basic Use 9: Advanced Use 10: Under the Hood 11: More Resources 12: Glossary
The first three buttons in the toolbar have to do with user management (default tab): add user, edit user, and delete any user highlighted. When you add a user, you will see this dialog box:
The second three are used with similar functions for group management (Groups tab), and allow you to decide who belongs to each group. This can be important for access to hardware, as the following example shows: Sometimes a program needs to have a user registered before it will operate correctly. Let's take an example with the photo organizer DigiKam, which can be fussy about this. According to the directions ontheDigiKamhomepage,theusernameshouldbeaddedtotheusergroupcamerabutthat group is not listed. Here's how you would do that: 1. 2. 3. 4. 5. Click Start Menu > System > KUser (User Manager), and supply root's password. ClickontheGroupstab,andconfirmthatthereisnogroupnamecamera. Click on the add group icon, or on the menu bar Group >Add... In the dialogue box that pops up, type camera as Group name. Highlight your username in the column on the right, then click the middle Add... button to move your username into the column Users in Group. 6. Click OK. 7. TheGrouptabnowincludesthegroupcamerawithyourusername.
Thisispage96of106
CLI commands
Although Dolphin and KUser cover most daily situations, sometimes it can be preferable to deal with the command line. Basic permissions are represented by r (read), w (write) and x (execute). To view permissions of a file on the command line, type this:
ls -l NameOfFile
The -l switch will cause the file to be list in long format, displaying its permissions among other information. Here is an example of what the user "newbie" might see for the Firefox profiles.ini file:
The bolded "rw-r--r--" bit right after the opening dash (indicating it is a regular file) contains read/write/execute permissions for owner, group and others: 9 characters total. Here it shows us that the owner has read and write but not execute (rw-), but the group and others can only read (r--). The owner in this case is specified to be "newbie" who belongs to the group "users". If for some reason it was necessary to change the ownership of this file to root using the command line, you would use the chown command like this:
For details on using chown, as well as the more detailed chmod, see Links and Guides for Section 10.2.
10.3:
Configuration files
With only rare exceptions, program and system settings on MEPIS Linux are stored in discrete plaintextconfigurationfilesthereisnoRegistrywhichrequiresspecialtoolstoedit.Most configuration files are just simple lists of parameters and values which are read by programs when they launch to determine their behavior.
Thisispage97of106
/etc/sysconfig/keyboardUsedtoconfigurethekeyboard. /etc/network/interfacesDefinesinternetinterfacesonthesystem. Some configuration files can contain just a few lines, or even be empty, while others may be quite long. The important point is that if you are looking for a configuration file for an application or process, head for the /etc directory and look around.
Example
We already looked at editing the configuration file /etc/fstab a couple of times earlier, so let's look at a different example here. Sound problems can be solved with a number of grahical and command-line tools, but once in a while a user needs to edit directly the system-wide configuration file. For many systems, this will be /etc/modprobe.d/snd-hda-intel.conf. It is a simple file whose top paragraph looks like this:
# some chips require that the model be set manually # for example asus g71 series may need model=g71v options snd-hda-intel model=auto
To try to get sound, you might decide to substitute the exact information about the sound model in placeofthewordauto..To find out your sound model, you could open a konsole and type:
The output will depend on the system, but it will take the following form:
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
Now you can plug that information back into the configuration file:
# some chips require that the model be set manually # for example asus g71 series may need model=g71v options snd-hda-intel model=nvidia
You would save the file, reboot the machine, and hopefully your sound would be working. You could also try more precision by using model=nvidia mcp61 instead, if the first did not work.
10.4:
Runlevels
MEPIS Linux boots up by executing the program init. After completing the boot process, init executes all start scripts in a directory specified by the default runlevel (this runlevel is given by the entry for id in /etc/inittab). Like most other Linux versions, MEPIS has 7 runlevels: 0 1 2 3 4 5 6 Halt (power down) Single-user mode: provides a root console without logon. Useful if you lose your root password Multiuser with no network Console logon, no X (i.e. no GUI) Not used/custom Default GUI logon Reboot
MEPIS defaults to runlevel 5, therefore any init scripts set up in the level 5 config file will run at boot.
Use
HTML in Header and Footer Demo
Thisispage98of106
Understanding runlevels can be handy. When users have a problem with X Window Manager, for instance, they can not work on it on the default runlevel 5, because as we just saw that is the level where X runs. But they can drop to runlevel 3 where they can work to fix things by opening a terminal, becoming root, and typing:
telinit 3
Once you are out of X and looking at a prompt, login with your normal username and password. T o get back to the login screen, become root and type: telinit 5
Other useful commands when you are looking at the prompt on runlevel 3 include: halt(asroot)shuts the machine down. reboot(asroot)rebootsthemachine. [application command] willrunthatapplicationifitisnotgraphical. It is equally possible to boot to runlevel 3 by merely adding the number three at the end of the boot options on the GRUB screen. From there you can simply type: startx
10.5:
Introduction
The Kernel
Last place in this Users Manual goes to the first and most important element of MEPIS Linux: the Linux kernel. Every Linux version (distro) uses some version of the kernel, which was first developed and is still maintained by Linus Torvalds, with input from many other programmers around the world. The following diagrams and descriptions of the GNU/Linux kernel come from the Anatomy of the Linux kernel and gives the average user a clear sense of the kernel's place in the Linux OS:
At the top is the user, or application, space. This is where the user applications are executed. Below the user space is the kernel space. Here, the Linux kernel exists. There is also the GNU C Library (glibc). This provides the system call interface that connects to the kernel and provides the mechanism to transition between the user-space application and the kernel. This is important because the kernel and user application occupy different protected address spaces. And while each user-space process occupies its own virtual address space, the kernel occupies a single
Thisispage99of106
address space. The kernel itself has a number of components that include process management, memory management, network stack (definition of a particular group of protocols along with the software to implement them), virtual file system, and device drivers. The largest of these by far is the collection of device drivers that are necessary to make your hardware usable. Much more detail is available from the documents referenced in the Links and Guides for Section 10.5.
Kernel versions
The Linux kernel is in constant development, so it uses a version numbering system to keep track. MEPIS Linux 11 is released using the kernel 2.6.36, but that will change over time. To find out your current major kernel version name, open a terminal and type:
$ uname -r
You will see a result something like 2.6.36-1-mepis-smp (32bit) or 2.6.36-1-mepis64-smp (64bit). The MEPIS kernel also has an internal version number that you can see by looking on the "Installed files" tab of the current kernel entry in Synaptic. Unlike other software on your system, the kernel is not upgraded automatically except below the minor revision level (indicated by the third number in the kernel name). To upgrade the kernel when a new one becomes available in the repos, follow this procedure: OpenSynapticasrootandsearchonthewordlinuximage. Look at the results carefully, and install the image marked upgradeable that has the word "mepis" attached and the next higher version number. Such updates (only internal version number changes) can be installed without endangering the reboot process. Kernel upgrades, where the major number changes will show up as a new package instead of an upgrade in Synaptic, should be approached with caution. They can be problematic, and may require manual editing of GRUB (see Wiki). To solve particular problems, advanced users sometimes make use of kernel patches. A patch is program that updates files according to instructions contained in a separate file, called a patch file. The patch file consists of a list of differences that can be run to change the original file. For details, follow the Wiki link below.
Advanced users sometimes compile and install their own kernel, starting with the kernel source code. The motivation for doing this can range from pure fun to practical goals such as to produce a kernel optimized for a certain architecture and use. Although the procedure is complicated, detailed directions can be found in the MEPIS Wiki if needed.
Kernel headers
In order to compile some programs you might need to have kernel headers, which are C files that define structures and constants that are needed for building most standard programs. Some programs ask for kernel sources, but most often the headers are sufficient. They may be installed by default but, if not, you can find them in Synaptic, but you have to be careful to match the headers to your kernel version. For this reason, it is actually somewhat easier to open a terminal, become root, and type:
This code will enter automatically the number of your working kernel and fetch the appropriate headers.
Thisispage100of106
There are a number of steps you might have to take to recover a functional MEPIS Linux system once you have your data safe, although ultimately you may have to reinstall using the LiveDVD. Depending on the type of failure, the following steps may be undertaken: Remove packages that broke the system. Reinstall the X config file. Reinstall GRUB. Reset the root password. Reinstall MEPIS. Be sure to ask on the forum.mepiscommunity.org if you have any questions about these procedures.
11:
More resources
If you are looking for something that is not covered in this Manual, these MEPIS resources are available for more help.
Wiki
The MEPIS Wiki contains a great deal of other material. As an ongoing product of volunteer users, it can be more up-to-date and detailed than the Manual, while also needing constant updating. Here's how to find what you're looking for: Follow the structure by drilling down in the four areas laid out on the Main Page: Getting Started: intended to provide new MEPIS users with the basic tools to get their system up and running. General Knowledge Database: intended to provide users with more advanced tools to understand and use their MEPIS system. Help and Guides: self-explanatory title, there is great stuff here for MEPIS users. Wiki Issues: topics pertaining to the Wiki itself. Consult Special Pages: Click on the Wiki Categories link in the left panel, and select your topic of interest. This is a very useful but often overlooked way to find answers to your questions. If you are looking for something added recently, click on the Recent Changes link. Click on the link Special pages for other possible aids.
Forums
HTML in Header and Footer Demo
Thisispage101of106
MEPIS Linux users have a number of forums at their disposal: forum.mepiscommunity.org: A friendly community forum for every level of knowledge, from newbie to expert. Mepisimo(espaol):http://www.mepisimo.com/forum/index.php LinuxQuestions.org: A venerable Linux forum that has a section dedicated to MEPIS. See the Links and Guides section at the bottom of the page for all the above.
Forum protocol
To get the answer you are seeking on any of these forums, please try to follow these procedures: Do some research on your own, reading the Wiki and using the search engines. Use meaningful, specific subject headers so people know what you are talking about. PLEASEHELPMEisnotgoingtogetyoumuchattention,whereasMEPISproblemswith HPscannerismuchmorelikelytoattractpeoplewhocanhelp. Describe carefully your hardware (see Section 5.1) and the sequence of actions that led to the problem(s). Remain courteous: these forums are staffed by volunteers who give of their time, knowledge, and expertise for the sole reason of wanting to help--the simple words "thank you" can do wonders.
Search engines
A number of search engines can be used for more help: Wiki search engines: Basic search: type what you are looking for into the search box in the left panel and hit return. Detailed search: click on the Custom search lin in the left panel. This will take you to page powered by a custom Google search that will search the entire Wiki for whatever you enter. Mepis.org search engine -- good tool that gives you access to all the older discussions and announcements published on the main MEPIS site. Be careful that the information you find applies to your version of MEPIS. forum.mepiscommunity.org search engine -- another good tool on this community site. Google or another universal search engine -- you need to be careful about suitability of results, but these can be particularly useful for tracking down drivers, error messages, hardware specs, etc. NOTE: much of the Linux documentation on the web is out-of-date or unsuitable for MEPIS Linux, and could actually do more harm than good to your system! Ask on the MEPIS community forum, if you are not certain whether or not an internet tip is applicable to MEPIS.
12:
Introduction
Linux terms can be confusing and offputting at first, so this Glossary provides a list of the ones used in this Manual to get you started. For more help on the terms used in the Linux computer world, see Links and Guides.
Thisispage102of106
If you reached this page by clicking on a green glossary link, use your browser's [<]backbutton to return you to your previous page.
Terms
applet: A program designed to be executed from within another application. Unlike an application, applets cannot be executed directly from the operating system. backend: Also back-end. The backend includes the various components of a program that process the user input entered through the frontend. See also frontend. backport: Backports are new packages that have been recompiled to run on a released distribution in order to keep it up-to-date. BASH: The default shell on most Linux systems as well as on Mac OS X, BASH is an acronym for Bourne-again shell. For more information, see Links and Guides at the bottom of the page. BitTorrent: Also bit torrent or torrent. A method invented by Bram Cohen to distribute large files without the need for a single individual to provide the hardware, hosting and bandwidth resources required. Bootloader: Program that initially chooses an operating system to load after the BIOS has finished intializing the hardware. Extremely small in size. the bootloader's only job is to hand contol of the computer over to the Operating System's kernel. Advanced bootloaders offer a menu to choose between several installed operating systems. chainloading: Also chain loading. Instead of directly loading an operating system, a boot manager like GRUB can use chain loading to pass control from itself to a boot sector on a hard disk partition. The target boot sector is loaded in from disk (replacing the boot sector from which the boot manager itself was loaded) and the new boot program is executed. In addition to when it is necessary, as in booting Windows from GRUB, the advantage to chainloading is that each operating system on the harddiskdriveandtherecouldbedozenscanberesponsibleforhavingthecorrectdatainit's own boot sector. So GRUB residing in the MBR need not be rewritten every time there are any changes. GRUB can simply chainload the relevant information from the boot sector of a given partition whether it has changed or remained the same since the last boot time. cheat code: Codes can be entered under "Boot Codes" (at the bottom of the screen where the cursor is blinking) when booting a SimplyMEPIS LiveDVD or LiveUSB to change the booting behavior. They are used to pass options to the MEPIS operating system to set parameters for particular environments.Anexampleisvga=normalwhichtellsthesystemtodisablethedefaultresolution, often used for older monitors.
cloop error: A failure to read a block of compressed data. CLOOP is shorthand for compressed loopback device, a linux kernel module that allows a compressed filesystem to be read, such as is used on a MEPIS LiveDVD. command line interface (CLI): Also known as console, Konsole, terminal, command prompt, shell, o r bash. This is a UNIX-style text interface, which MS-DOS was also designed to resemble. A root console is one where administrative privileges have been acquired after entering the root password. desktop environment: The software which provides a graphical desktop (windows, icons, desktop, task bar, etc) for an operating system user. MEPIS integrates the KDE desktop and configuresittofeelfamiliartobothWindowsandMacOSXusers. disk image: A file containing the complete contents and structure of a data storage medium or device such as a hard drive or DVD. See also ISO. Distribution:ALinuxDistribution,ordistro,isaparticularpackagingoftheLinuxkernelwith various GNU software packages, and different desktops or window managers. Sinceunlikethe proprietarycodeusedintheMicrosoftandAppleOS'sGNU/LinuxisFree,OpenSourceSoftware, literally anyone in the world who has the ability can freely build on what has been done and innovate a new vision of a GNU/Linux operating system. MEPIS Linux is a distro based on the Debian Linux family. file system: Also filesystem. This refers to the way that files and folders are logically arranged on a computer's storage devices so they may be found by the operating system. It can also refer to the type of formatting on a storage device, such as the common Windows formats NTFS and FAT32, or the Linux formats ext3, ext4 or ReiserFS, and in this sense refers to the method actually used to encode binary data on the Hard Disk Drive, floppy, flash drive, etc. free-as-in-speech: TheEnglishwordfreehastwopossiblemeanings:1)withoutcost,and2) without restrictions. In part of the open-source software community, an analogy used to explain the differenceis1)freeasinbeervs.2)freeasinspeech.Thewordfreeware is used universally to refer to software that is simply without cost, whereas the phrase free software loosely refers to software that is more properly called open-source software, licensed under some type of open source license such as the GPL. frontend: Also front-end. The front-end is the part of a software system that interacts directly with the user. See also backend. GPL: The GNU General Public License. This is a license under which many open-source applications are released. It specifies that you may view, modify, and redistribute the source code of applications
Thisispage103of106
released under it, within certain limits; but that you may not distribute the executable code unless you also distribute the source code to anyone who asks for it. Graphical User Interface (GUI): This refers to a program or operating system interface that uses pictures (icons, windows, etc), as opposed to text (command-line) interfaces. home directory: One of the 17 top-level directories branching from the root directory in MEPIS Linux, /home contains a subdirectory for every registered user of the system. Within each Users home directory s/he has full read-write privileges. Further, most of the user-specific configuration files for various installed programs are stored in hidden subdirectories within the /home/username directory asisdownloadedemail.Otherdownloadedfilesusuallygobydefaultintothe home/username/Documents or /home/username/Desktop subdirectories. IMAP: The Internet Message Access Protocol is an protocol that allows an e-mail client to access a remote mail server. It supports both on-line and off-line modes of operation. interface: A point of interaction between computer components, often referring to the link between a computer and a network. Examples of interface names in MEPIS Linux include WLAN (wireless) and eth0 (basic wired). ISO: A disc image following an international standard that contains data files and filesystem metadata, including boot code, structures, and attributes. This is the normal method for delivering Linux versions such as MEPIS over the Internet. See also disk image. kernel: The layer of software in an operating system that interacts directly with the hardware. LiveCD/DVD: A bootable compact disc from which one can run an operating system, usually with a complete desktop environment, applications, and essential hardware functionality. In 2003, MEPIS was the first distribution of Linux to include a GUI-based Installer application on the desktop of a fully functional LiveCD, so a separate Installation CD was no longer needed. Simultaneously, MEPIS was also the first Linux to include GUI-based tools, now called Assistants, on the LiveCD to help a user repair a broken system. LiveUSB: A USB flash drive on which an operating system has been loaded in such a way that it can be booted and run. See LiveDVD. MBR: Master Boot Record: the first 512-byte sector of a bootable hard disk drive. Special data written to the MBR enables the computer's BIOS to pass the boot process off to a partition with an installed operating system. md5sum: A program that calculates and verifies a file's data integrity. The MD5 hash (or checksum) functions as a compact digital fingerprint of a file. It is extremely unlikely that any two non-identical files will have the same MD5 hash. Because almost any change to a file will cause its MD5 hash to also change, the MD5 hash is commonly used to verify the integrity of files.
mirror: Also mirror site. An exact copy of another Internet site, commonly used to provide multiple sources of the same information to supply reliable access to large downloads. module: Modules are pieces of code that can be loaded and unloaded into the kernel upon demand. They extend the functionality of the kernel without the need to reboot the system. mountpoint: The place on the root filesystem where a fixed or removable device is attached (mounted) and accessible as a subdirectory. All computer hardware needs to have a mountpoint in the filesystem to be usable. Most standard devices such as keyboard, monitor and your primary hard disk drive are mounted automatically at boot. NTFS:Microsoft's New Technology File System debuted in 1993 on the Windows NT Operating System, geared to business networks, and with revisions entered the mainstream Windows users' desktop computers in later versions of Windows 2000. It has been the standard file system since Windows XP was introduced in late 2001. Unix/Linux-oriented folk say it stands for "Nice Try File System." open-source: Software whose source code has been made available to the public under a license that allows individuals to modify and redistribute the source code. In some cases, open-source licenses restrict the distribution of binary executable code. For more information visit the Open Software Initiative (link below). package: A package is a discrete, non-executable bundle of data that includes instructions for your package manager about installation. A package doesn't always contain a single application; it might contain only part of a large application, several small utilities, font data, graphics, or help files. package manager: A package manager such as (Synaptic or Gdebi) is a collection of tools to automate the process of installing, upgrading, configuring, and removing software packages. See 7.2: Synaptic Software Package Manager Panel: The panel in KDE (Kicker in KDE 3.5) that appears by default at the bottom of the screen and contains navigation icons, open (minimized) programs and system notifications. It is highly configurable, and can include a utility to switch between any of several desktops you can run simultaneously, if your primary desktop surface tends to get cluttered with open programs. Section 3.4 port: A virtual data connection that can be used by programs to exchange data directly, instead of going through a file or other temporary storage location. Ports have numbers assigned for specific protocols and applications, such as 80 for HTTP, 5190 for AIM, etc.
Thisispage104of106
repo: See repository. repository: A software repository is an internet storage location from which software packages may be retrieved and installed via a package manager. In MEPIS Linux, the repository list file (/etc/apt.sources.list) is typically modified through the default package manager Synaptic. root: Root has two common meanings in Unix/Linux OSs, and they are intimately connected, but the distinction is important to understand. The root filesystem is the basic logical structure of all the files the operating system can access, whether programs, processes, pipes or data. It should follow the Unix Filesystem Hierarchy Standard, which specifies where in the hierarchy to locate all types of files. The second meaning of root is the computer userwhoownstherootfilesystemandsohasall permissions necessary to do anything to any file. While it is sometimes necessary to temporarily assume the powers of the root user to install or configure programs, it is dangerous and violates the basic security structure of Unix/Linux to log in and operate as root unless absolutlely necessary. In a command line interface, a regular user can temporarily become root by issuing the command su then entering the root password. runlevel: A runlevel is a preset operating state on a Unix-like operating system. A system can be booted into any of several runlevels, each of which is represented by a single digit integer. Each runlevel designates a different system configuration and allows access to a different combination of processes (i.e., instances of executing programs). See Section 10.4: Runlevels script: An executable text file, containing commands in an interpreted language. Usually refers to BASHscriptswhichareusedextensivelyunderthehoodoftheLinuxoperatingsystem,butother languages may be used as well. session: A login session is the period of activity between a user logging in and logging out of a system. In MEPIS Linux, this typically indicates the lifetime of a particular user "process" (the program code and its current activity) that KDE invokes. source code: The human-readable code in which software is written prior to being assembled or compiled into machine-language code. switch: A switch (also flag, option or parameter) is a modifier appended to a command to change its behavior. A common example is -R (recursive), which tells the computer to carry out the command through all subdirectories. symlink: Also symbolic link and soft link. A special type of file that points to another file or directory and not to data. It allows the same file to have different names and/or locations. tarball: An archiving format, like zip, popular on the Linux platform. Unlike zip files, though, tarballs may use one of a number of different compression formats, such as gzip or bzip2. They usually end in file extensions like .tgz, .tar.gz, or .tar.bz2. Many archive formats are supported in MEPIS with a graphical application called Ark. Usually an archive can be extracted simply by right-clicking on it in KDE. Unix: Also UNIX. The operating system which Linux is modeled after, developed in the late 1960's at Bell Labs and used primarily for servers and mainframes. Like Linux, Unix has many variations. window manager: A c o m p o n e n t o f a d e s k t o p e n v i r o n m e n t t h a t p r o v i d e s t h e b a s i c maximize/minimize/close/move functions for windows in the GUI environment. Sometimes it can be used as an alternative to a full desktop environment. In MEPIS, the default window manager is called KWin, and is an integral part of the K Desktop Environment (KDE). X: Also X11, xorg. The X Window System is a networking and display protocol which provides windowing on bitmap displays. It provides the standard toolkit and protocol to build graphical user interfaces (GUIs) on Unix-like operating systems and OpenVMS, and is supported by almost all other modern operating systems. In Mepis Linux, the X server operates on runlevel 5 . S e e a l s o : http://en.wikipedia.org/wiki/X_display_manager
Pre-Installation 3.0: Introduction 3.1: 3.2: 3.3: System requirements Coming from Windows Booting up
Thisispage105of106
Installation 4.0: Introduction 4.1: 4.2: 4.3: 4.4: 4.5: Detailed Steps Special situations Troubleshooting Apple Intel computers Uninstall
5:
Configuration 5.0: Introduction 5.1: 5.2: 5.3: 5.4: 5.5: 5.6: 5.7: 5.8: 5.9: Quick Fixes Peripherals MEPIS Assistants GRUB Display Network Sound Bluetooth Localization
6: 7:
The Command Line Software Management 7.1: Introduction 7.2: 7.3: Synaptic Package Manager Other Methods
8:
Basic Use 8.0: Introduction 8.1: 8.2: 8.3: 8.4: 8.5: 8.6: 8.7: 8.8: 8.9: 8.10: 8.11: 8.12: Internet Multimedia Office Home Security Utilities System Games Kids stuff Google tools antiX
9:
Advanced Use 9.0: Introduction 9.1: 9.2: 9.4: 9.5: 9.6: 9.7: Internet (server) Development Virtual Machines Alternate Window Managers Accessing Other Partitions Scripts
9.3:WindowsunderMEPIS
10:
Under the Hood 10.0: Introduction 10.1: 10.2: 10.3: 10.4: 10.5: The Filesystem Permissions Configuration files Runlevels The Kernel
11: 12:
end of file
Thisispage106of106