Академический Документы
Профессиональный Документы
Культура Документы
com
For more information on our Cape Training and Assessment Centre courses, please contact us: Cape plc
Head office 9 The Square, Stockley Park Uxbridge, Middlesex UB11 1FW Tel + 44 (0)20 3178 5498
Cape Training and Assessment Centre Offshore Far East Pacific Rim
Cape Australia
Brisbane 106-110 Harburg Drive, Beenleigh QLD 4207 Tel +61 7 3297 4900 Fax + 61 7 3807 8455 Darwin 5 Mander Road (Part) Holtze (Darwin) NT 0829 Tel +61 8 8932 2237 Fax +61 8 8932 2289 Melbourne 2 Regent Avenue Springvale VIC 3171 Tel +61 3 9549 9999 Fax +61 3 9549 9944 Perth 89 Office Road Kwinana WA 6167 Tel +61 8 9419 0421 Fax +61 8 9419 5070 Email training@capeplc.com.au
Cape Brunei
G14/G15/G16 Komplek Harapan, Lot No. 3038, Jalan Setia Di-Raja, Kuala Belait KA3131, Negara Brunei Darussalam Tel +673 334 7055 Fax +673 334 7029
Cape Philippines
Warehouse #2-A Sunblest Compound KM 23 West Service Road Barangay Cupang Muntinlupa City Philippines 1771 Tel +63 2 994 3806 Email training.philippines@capeplc.com
Cape is able to provide the ideal solution for any training, learning or assessment situation
Course programme
Course programme
Course programme Course programme Health and safety awareness course Safety guidance note 4 training and instruction Familiarisation in approved prefabrication systems scaffold Interpretation of simple drawings Putlog scaffold Birdcage scaffold Independent scaffold Static tower (in tube and fittings) Alterations to scaffolds (dropping lift height on independent) Training method Training method A highly participative course with practical sessions to compliment the classroom theory session. Duration Duration 10 days
A highly participative course with practical sessions to compliment the classroom theory session. 10 days
Scaffold Inspection
Scaffold Inspection is designed for all Supervisors and Managers required to inspect, record, and approve scaffold structures. By attending the course, candidates will gain knowledge of the requirements for inspection of scaffold tubes and fittings on work platforms. This Scaffold Inspection training course is intended for persons responsible for inspecting and checking scaffolds for safe use and in accordance with statutory regulations. The overall aim is to develop in trainees an understanding of scaffold components, forms of construction and inspection procedures of basic access scaffolds and to comply with current legislation and codes of practice.
Who is the course for? Candidates that are responsible for carrying out statutory scaffold inspections and have basic understanding of construction work at height prior to attending. Statutory requirements and practice codes Identifying scaffold materials and components Equipment tolerance Scaffolding foundations and ties Access and egress Background on work platform Lashing and fixing of ladders Scaffolding types Inspection and registers Practical inspection and detection of built-in faults
Course programme
Course programme
Training method
Duration
Practical scaffolding inspections alongside theory test to assess trainees comprehension. 2 days
Insulation
The Insulation training course is designed to assist trainees to gain the necessary qualifications and competencies to service all insulation requirements. The main aim is for candidates to gain the knowledge and skills to assess appropriate thermal, acoustic, cryogenic, personal protection and passive fireproofing insulation needs in different locations under possibly extreme conditions.
Who is the course for? Course programme Trainees who are interested in working as an industrial insulator. Tools, equipment and materials Introduction to insulation Staggered joints needed for thermal, acoustic, cryogenic, personal protection Straight pipe section application and passive fire-proofing projects Mylar foil application Bend application The installation of non-metallic cladding to pipe work, flanges, Tee piece application Vapour stop valves, and dome ends including Expansion joints sealing the joints and using Contraction joints identification markers Fibaroll Cladding equipment maintenance Ultraviolet lights Working with lights Includes discussion, demonstration and practical application. 10 days
Course programme
Use of blasting and painting HSE overview, blasting and instruments (DFT, WFT, gauge, painting safety practices holiday) Surface preparation (grit Testing blasting) Daily painting report preposition Basic coating technology (corrosion/coating technology) Industrial painting Coating defects and assessment Calculations Training method Includes theory and practical application with close supervision. To ensure candidates achieve the required competency, they are asked to complete a training portfolio at the end of the course. 5 days Training method Duration
Duration
Manual Handling
The Manual Handling training course is designed for all personnel in industries involving lifting, lowering, pushing, pulling and carrying tasks. It provides candidates the proper knowledge and training in manual handling to ensure safety and prevent injuries when doing their tasks. Its aim is to ensure that delegates will understand the need for accident prevention and control, understand basic body mechanics and be able to demonstrate safe methods of lifting.
Who is the course for? Anyone who needs basic practical experience of manual handling and lifting techniques. Introduction to manual handling Duties and responsibilities of employers and employees Avoiding manual handling Risk assessment Appropriate systems of work Use of mechanical aids Guiding principles for safe lifting heights Good handling technique (for pushing and pulling) Includes theory as well as practical sessions. 1 day
Basic welding process SMAW welding process GTAW welding process GMAW welding process FCAW welding process Basic joint design Welding position and techniques Welding procedure specification Introduction to basic NDT Includes theory as well as practical application. 5 days
Course programme
Course programme
Course programme
Course programme
Course programme
Course programme
Course programme
Training method
Duration
Course programme
Course programme
Training method
Duration
Forklift Truck
The Forklift Truck course offers training according to the Road Transport Industry Training Board (RTITB) standards. RTITB is recognised by the United Kingdom Health and Safety Commission as well as the Philippine Health and Safety Commission under Health and Safety at Work Act of 1974 (Sec. 2 and 16). In this course, trainees will receive in-depth instructions on applicable regulations and safe forklift operations. Each trainees skill level is assessed until a level of operational competence is observed.
Who is the course for? Delegates who have experience of operating a forklift but have never been trained on the correct and safe use of forklift truck operations to RTITB standards. Health and safety guidelines Operator responsibilities Pre-shift inspection Identification of all main components Correct driving and operation Controls and instruments Correct stacking methods Accident prevention Truck stability Vehicle loading/unloading Final assessment
Course programme
Training method
Training method
Includes discussion, demonstration and practical application to ensure we meet safety and competency standards. Depending on the course Five-day basic operator counterbalance (Novice) Three-day basic operator counterbalance (Existing) One-day refreshers training
Duration Duration
Basic Firefighting
The Basic Firefighting training course is offered to all personnel from all types of businesses. Part of health and safety measures at work is the proper use and selection of fire extinguisher for certain types of machines. The course is designed to equip learners with the knowledge and necessary skills to manage and extinguish a fire in the home or office environment, using a variety of skills and various firefighting equipment covered during the course.
Who is the course for? Anyone who should have increased knowledge on fire and fire safety. Legal fire code, policies and regulations Organising the fire brigade Fire safety Stages of fire Heat transfer Factors affecting the degree of fire hazard Principles of fire prevention and control Fire extinguishers (types, inspection and maintenance) Evacuation
Course programme
Course programme
Training method
Duration
Abrasive Wheels
The Abrasive Wheels training allows candidates to know how to select and mount safely the correct type of disc or wheel required for their job. Operating abrasive wheels or cutting-off discs involves safety measures and responsibilities. Delegates will be able to state the hazards that exist when using abrasive wheels and the precautions to take to overcome these hazards as well as demonstrate the correct method of mounting an abrasive wheel to a portable machine.
Who is the course for? All those required to operate or change abrasive wheels and cutting-off discs. Proper operation of the machine Produce good quality outputs for their client Health and safety at work regulations including proper PPE Safe use of abrasive wheels Manual handling Types and functions of abrasive wheels and cutting discs Selecting, testing, mounting and storage of abrasive wheels Proper care, maintenance, handling and transporting of abrasive wheels and discs
Safety Passport
Capes Safety Passport course is designed to provide candidates with a basic knowledge of health and safety, allowing them to work more safely and with less risk to themselves and others. The main aim of the course is to raise the health and safety awareness of all concerned and promote a safer working environment for contractors and employees.
Who is the course for? Course programme All personnel who work on industrial and construction sites. Health and safety law Safe working practices Safe access and egress Working at heights Site transport COSHH/PPE and hazardous substances Manual handling Cranes, hoists and slings Noise at work Fire precautions AV presentation and tutorials. 2 days
Course programme
Environmental Awareness
The Environmental Awareness course provides learners with the appropriate level of knowledge and understanding of the key concepts involved in environmental awareness as well as describe the major environmental issues facing organisations. It should help the trainees understand how they can contribute to reducing environmental impacts.
Who is the course for? All delegates who need to understand the principles and importance of environmental issues. Environmental issues Pollution Business and the environment Energy and water Waste management Transport Environmental law Environmental management AV presentation and tutorials. 1 day
Course programme
Course programme
Permit to Work
The Permit to Work awareness course is tailored to client-specific industries. Its main aim is to provide candidates with a thorough understanding of how such systems work, why they are necessary, individual and corporate responsibilities under such systems and the consequences of getting it wrong.
Who is the course for? All personnel who work under such permits and those with the responsibility of issuing them. How such systems work and the necessity for them Responsible persons and authorised persons and their respective duties Key safes and lock out systems, labelling, related paperwork and duties of care Pre and post permit issue checks Consequences Classroom lectures, with practical examples and actual practice under supervision. Depending on the course Appreciation course for workers - 1 day Permit issuers course - 3-5 days (dependent on client requirements)
Course programme
Course programme
Training method
Training method
Duration
Duration
Course programme
Duration
Contact Cape and discover how trained, competent and safe people can improve your business