Академический Документы
Профессиональный Документы
Культура Документы
http://www.cfd-online.com/Wiki/Baldwin-Lomax_model
Home News Forums Wiki Links Jobs Books Events Tools Feeds About Search Home > Wiki > Baldwin-Lomax model
Baldwin-Lomax model
From CFD-Wiki
The Baldwin-Lomax model [Baldwin and Lomax (1978)] is a two-layer algebraic 0-equation model which gives the eddy viscosity, , as a function of the local boundary layer velocity profile. The model is suitable for high-speed flows with thin attached boundary-layers, typically present in aerospace and turbomachinery applications. It is commonly used in quick design iterations where robustness is more important than capturing all details of the flow physics. The Baldwin-Lomax model is not suitable for cases with large separated regions and significant curvature/rotation effects (see below). Turbulence RANS-based turbulence models
Turbulence modeling
Contents
1 Equations 2 Model constants 3 Model variants
1. Linear eddy viscosity models 1. Algebraic models 1. Cebeci-Smith model 2. Baldwin-Lomax model 3. Johnson-King model 4. A roughness-dependent model 2. One equation models 1. Prandtl's one-equation model 2. Baldwin-Barth model 3. Spalart-Allmaras model 3. Two equation models 1. k-epsilon models 1. Standard k-epsilon model 2. Realisable k-epsilon model 3. RNG k-epsilon model 4. Near-wall treatment 2. k-omega models 1. Wilcox's k-omega model 2. Wilcox's modified k-omega model 3. SST k-omega model 4. Near-wall treatment 3. Realisability issues 1. Kato-Launder modification
1 of 5
2012/04/29 01:48 .
http://www.cfd-online.com/Wiki/Baldwin-Lomax_model
Equations
2. Durbin's realizability constraint 3. Yap correction 4. Realisability and Schwarz' inequality 2. Nonlinear eddy viscosity models 1. Explicit nonlinear constitutive relation 1. Cubic k-epsilon 2. EARSM 2. v2-f models 1. model 2. model 3. Reynolds stress model (RSM) Large eddy simulation (LES) 1. 2. 3. 4. 5. 6. Smagorinsky-Lilly model Dynamic subgrid-scale model RNG-LES model Wall-adapting local eddy-viscosity (WALE) model Kinetic energy subgrid-scale model Near-wall treatment for LES models
Detached eddy simulation (DES) Direct numerical simulation (DNS) Turbulence near-wall modeling Turbulence free-stream boundary conditions 1. Turbulence intensity 2. Turbulence length scale
(1)
Where
is equal to
(3)
Where
(4)
2 of 5
2012/04/29 01:48 .
http://www.cfd-online.com/Wiki/Baldwin-Lomax_model
(5)
(6)
(8)
and
(9)
(10)
is the difference between maximum and minimum speed in the profile. For boundary layers the minimum is always set to zero.
(11)
Model constants
The table below gives the model constants present in the formulas above. Note that is a constant, and not the turbulence energy, as in other sections. It should also be pointed out that when using the Baldwin-Lomax model the turbulence energy, , present in the governing equations, is set to zero.
3 of 5
2012/04/29 01:48 .
http://www.cfd-online.com/Wiki/Baldwin-Lomax_model
26
1.6
0.3
0.25
0.4 0.0168
Model variants
In order to improve the Baldwin-Lomax model modifications of the model-constants can be made in order to account for the effect of adverse pressure gradients. This has been done by Granville and Turner and Jennions. For further information see the references below.
Implementation issues
The computation of most of the model looks to relatively straightforward, but upon further examination, a few issues crop up. First, the model is nonlocal in nature due to the presence of the damping function. This means that for any location in the flow interior, we need a wall (or other suitable location) to compute a from. Further, the calculation of and is best suited to a structured grid in which grid lines emanate outward from a wall (or wakeline, etc.). The model is thus best used in a structured grid setting, but has been used with unstructured grids via background grids [Mavriplis (1991)]. Second, the determination of and is sensitive to gridpoint location, as the vorticity magnitude is typically only available pointwise. One solution (perhaps with limited justification) is to do a fit of to reduce any problems. Finally, it is tempting to use the minimum of the two (inner and outer) eddy viscosity results instead of the correct crossover formula. This simplifies the programming, but is not justifiable on any other grounds (and can lead to the use of the wrong eddy viscosity). The (minimal) additional programming is required for correct model implementation.
4 of 5
2012/04/29 01:48 .
http://www.cfd-online.com/Wiki/Baldwin-Lomax_model
We need some further information here about what to think about when implementing this model in a CFD code. For example, there are some issues when computing the max and min values in the formulas - in complex 3D cases you can sometimes find several local mins/maxs. Can anyone add something about this?
References
Baldwin, B. S. and Lomax, H. (1978), "Thin Layer Approximation and Algebraic Model for Separated Turbulent Flows", AIAA Paper 78-257. Granville, P. S. (1987), "Baldwin-Lomax Factors for Turbulent Boundary Layers in Pressure Gradients", AIAA Journal, Vol. 25, No. 12, pp. 1624-1627. Mavriplis, D. J. (1991), "Algebraic turbulence modeling for unstructured and adaptive meshes", AIAA Journal, Vol. 29, pp. 2086-2093. Turner, M. G. and Jennions, I. K. (1993), "An Investigation of Turbulence Modeling in Transonic Fans Including a Novel Implementation of an Implicit Turbulence Model", Journal of Turbomachinery, Vol. 115, April, pp. 249-260. Wilcox, D.C. (1998), Turbulence Modeling for CFD, ISBN 1-928729-10-X, 2nd Ed., DCW Industries, Inc..
Return to Turbulence modeling Retrieved from "http://www.cfd-online.com/Wiki/Baldwin-Lomax_model" Category: Turbulence models This page was last modified on 3 January 2012, at 09:15. Content is available under GNU Free Documentation License 1.2.
5 of 5
2012/04/29 01:48 .