Академический Документы
Профессиональный Документы
Культура Документы
Error Display Possible Cause Toner has run out and the copier is no longer able to make copies. Action Install a new Toner Bottle. Replacing the Toner Bottle (p.8-8)
Paper of good size is not available for the copy cycle in the Auto Paper mode.
Load the paper indicated by the blinking paper size indicator, or press the [Paper] key to select another paper size.
Identify the misfeed location on the control panel and remove the sheet of misfed paper. Clearing a Paper Misfeed (p.8-12)
Identify the misfeed location on the control panel and remove the sheet of misfed paper. Clearing a Paper Misfeed (p.8-18)
Identify the misfeed location on the control panel and remove the sheet of misfed paper. Clearing a Paper Misfeed (p.8-12)
The Document Feeder Cover (Doc. Feed Cover) of the Automatic Document Feeder is open. Memory is full when the image data is read.
Press the [Panel Reset] key. Or, turn OFF, then ON, the Power Switch. (This will erase all data that has so far been read.)
Memory is full when image data is received from the personal computer.
Press the [Panel Reset] key. Or, turn OFF, then ON, the Power Switch. (This will erase all image data that has so far been received.)
A size error has occurred with the paper loaded in the tray.
Press the [Clear] key, slide out the tray in which the size error has occurred, and slide it back into the copier. Check the paper size set with Custom Size Input and carry out the Custom Size Input procedure once again. Plug in the Plug-In Counter.
Turning OFF, then ON, the copier will minor malfunciton. If this does not reset the minor malfunction, call your Tech. Rep. and give him or her the malfuncion code being shown on the Display.