Академический Документы
Профессиональный Документы
Культура Документы
382198
Page No. 1
A) The parts list consists of: A Front page showing the name of the plant and the precipitator described. A page containing this explanation A contents list A page containing survey of revisions In some partslists the following pages may appear: A page containing a list of welding electrodes for erection. A page containing a list of instructions for client and erection A page containing a list of special drawings for client and erection. The remaining pages are numbered main sheets with the actual contents of the parts list. The last pages can be a list of suppliers of certain parts and a list of spare parts. B) The parts list specifies: Position Numbers, quantity, designation and data, drawing or parts list number, material, weight, and grouping of supply for each of the components of the precipitator. C) Column 1: The position numbers are the "main key" to the parts list. Each component has a unique pos. No., which corresponds to that shown on the assembly drawings, showing the physical position of the sub-parts list. Each component is normally an erection unit, which is described by means of a drawing or a supplier if nothing else is specified. The components are grouped corresponding to the physical main groups of the precipitator, each having an assembly drawing, mentioned first in each group. The assembly drawings etc. are also given a pos. no. making reference to the drawing possible. Column 2: "Quantity" shows the necessary number of each component to be used for 1 off the type of precipitator described on the front page in the precipitator code. If a component is described by means of a sub-parts list, "Quantity" describes the number of times the sub-parts list is to be repeated. Column 3: States the designation of the components. Further, it describes the numerical values corresponding to a row of letters for some of the components. This is the key to the marking of dimensions on the relevant drawing, which is filled in with letters. This means that the drawing might often seen to be out of proportion, and it might for instance show more stiffening irons, holes, etc. than the dimensions indicate. In all cases the dimensions stated must be followed. Column 4: States drawing numbers and sub-parts list numbers. Column 5: Material code referring to FLS material data sheets. If several different materials are required in a component, the code for the main material is named. For a full material specification refer to the drawing or the sub-parts list. Main material designation may differ between drawing and parts list. In that case the parts list designation must be used. Column 6: States the weight of the total amount of each component. The weight is normally rounded off to a whole number of kilos. Column7: "Doc. for or Supply from" explains who is going to receive drawings (1) and explains the grouping of the supply for the goods (2). It is implied that all suppliers of goods also receive drawings. D) At the foot of each parts list sheet is a space for remarks for one or more pos. nos. E) Bolts, screws, fittings etc. are stated by a code number referring to a folder No. 7.000001 named "Code for parts to be purchased".
Rev. 0
Designed
KAMO
Date
27/11/2008
Checked
SGVI
Date
27/11/2008
Approved
HFR
Date
27/11/2008
Rev. in pos. no.: The information transmitted by this document is the proprietary and confidential property of FLSmidth, and may not be duplicated, disclosed, or utilized without written consent from FLSmidth. FileId
Page No. 2
Sections
Part list structure Contents Survey of revisions Standard details, railing. Standard details, grating Gangway Railing for gangway Railing on roof Grating Bolt, nut and washer Supplier of Baspak asbestos-free plt.
Page
1 2 3 4 5 6 7 8 9 10 11
Rev. 0
Designed
KAMO
Date
27/11/2008
Checked
SGVI
Date
27/11/2008
Approved
HFR
Date
27/11/2008
Rev. in pos. no.: The information transmitted by this document is the proprietary and confidential property of FLSmidth, and may not be duplicated, disclosed, or utilized without written consent from FLSmidth. FileId
Electrostatic precipitator Access facilities Survey of revisions Version 1 Pages, changed, added or removed in this version Original
The information transmitted by this document is the proprietary and confidential property of FLSmidth, and may not be duplicated, disclosed, or utilized without written consent from FLSmidth. FileId
Page No. 4
Welding details for railing. The supplier can choose between design A and design B, but the same design has to be used the whole project.
Radius of bendings. The bendings can be made by welding-bends or with a bending-radius between 50-120mm. The radius chosen has to be the same for each pipe-dimention for the whole project.
Rev.
0
Designed
KAMO
Date
27/11/2008
Checked
SGVI
Date
27/11/2008
Approved
HFR
Date
27/11/2008
Rev. description.:
Page No. 5
The supplier can choose between grating type P and type SP, but the same type has to be used for the whole project.
Rev.
0
Designed
KAMO
Date
27/11/2008
Checked
SGVI
Date
27/11/2008
Approved
HFR
Date
27/11/2008
Rev. description.:
Electrostatic Precipitator Access facilities Gangway Quantity Designation & code and / or dimensions Erection drawing 6 Support for gangway a=170 b=1030 h1=HE120B Bracket Angle Hinge Insulation for support Gangway a=850 b=180 c=250 d=1130 u1=UNP140 Gangway a=850 b=180 c=250 d=1130 u1=UNP140 Gangway a=850 u1=UNP140
Parts list 5.382198 Dwg no. / Parts list no. 1.492453 3.155354 1100
Mat. code
Total kgs.
6 6 6 1
51 14 5 427
109
2.170689
1100
427 2.BSD
110
2.170686
1100
380 2.BSD
1508 kgs
x) Remarks to pos. No.: 107: Baspak 'S' plate or similar material used for packing without asbestos fibres (min 500 Deg.C). Refer last page for supplier detail. Rev. 0 Designed
KAMO
Date
27/11/2008
Checked
SGVI
Date
27/11/2008
Approved
HFR
Date
27/11/2008
Rev. in pos. No.: The information transmitted by this document is the proprietary and confidential property of FLSmidth, and may not be duplicated, disclosed, or utilized without written consent from FLSmidth. PageId
Electrostatic Precipitator Access facilities Railing for gangway Quantity Designation & code and / or dimensions 2 Railing a=705 1=48.3x3.25 2=26.9x2.65 Railing a=1120 1=48.3x3.25 2=26.9x2.65 Railing a=1120 1=48.3x3.25 2=26.9x2.65 Railing a=1120 1=48.3x3.25 2=26.9x2.65 Railing a=1120 1=48.3x3.25 2=26.9x2.65
Total kgs.
104 2.BSD
b=705
121
3.137102 b=6000
1100
141 2.BSD
122
3.137108 b=5600
1100
126 2.BSD
123
3.137103 b=6000
1100
141 2.BSD
124
3.137144 b=375
1100
132 2.BSD
644 kgs
Date
27/11/2008
Checked
SGVI
Date
27/11/2008
Approved
HFR
Date
27/11/2008
Rev. in pos. No.: The information transmitted by this document is the proprietary and confidential property of FLSmidth, and may not be duplicated, disclosed, or utilized without written consent from FLSmidth. PageId
Electrostatic Precipitator Access facilities Railing on roof Quantity Designation & code and / or dimensions 2 Railing on roof, Design A a=1075 b=6450 c=225 n=6 1=48.3x3.25 2=26.9x2.65 Railing on roof, Design B a=1075 b=6450 c=225 n=6 1=48.3x3.25 2=26.9x2.65 Railing on roof a=965 b=5790 n=6 1=48.3x3.25 2=26.9x2.65
Total kgs.
200 2.BSD
202
3.137140
1100
200 2.BSD
203
3.137137
1100
560 2.BSD
960 kgs
Date
27/11/2008
Checked
SGVI
Date
27/11/2008
Approved
HFR
Date
27/11/2008
Rev. in pos. No.: The information transmitted by this document is the proprietary and confidential property of FLSmidth, and may not be duplicated, disclosed, or utilized without written consent from FLSmidth. PageId
Electrostatic Precipitator Access facilities Grating Quantity Designation & code and / or dimensions 2 2 12 4 80 Grating DIN 24537-SP(P)-30T1470x250 Grating DIN 24537-SP(P)-30T1650x1100 Grating DIN 24537-SP(P)-30T800x930 Grating DIN 24537-SP(P)-30T1650x950 Safety fittings for grating x) x) x) x)
Page No. 9 *)Doc. for or Supply from 21 2.BSD 102 2.BSD 250 2.BSD 176 2.BSD 14 2.BSD
Total kgs.
563 kgs
x) Remarks to pos. No.: 401- 404: Refer page 5 of parts list, hot dip galvanised. Rev. 0 Designed
KAMO
Date
27/11/2008
Checked
SGVI
Date
27/11/2008
Approved
HFR
Date
27/11/2008
Rev. in pos. No.: The information transmitted by this document is the proprietary and confidential property of FLSmidth, and may not be duplicated, disclosed, or utilized without written consent from FLSmidth. PageId
Electrostatic Precipitator Access facilities Bolt, nut and washer Quantity Designation & code and / or dimensions 132 132 264 24 24 48 Bolt 0213.M12x45 Nut 0113.M12 Washer 0700.M12 Bolt 0213.M16x55 Nut 0113.M16 Washer 0700.M16 x) x) x) x) x) x)
Page No. 10 *)Doc. for or Supply from 7 2.BSD 2 2.BSD 2 2.BSD 3 2.BSD 1 2.BSD 1 2.BSD
Mat. code
Total kgs.
16 kgs
Date
27/11/2008
Checked
SGVI
Date
27/11/2008
Approved
HFR
Date
27/11/2008
Rev. in pos. No.: The information transmitted by this document is the proprietary and confidential property of FLSmidth, and may not be duplicated, disclosed, or utilized without written consent from FLSmidth. PageId
Page No. 11
Forhandler af Baspak asbestfri plader Supplier of Baspak asbestos-free plates Baspak asbestfreie Platten-Verhandlung Revendeur de Baspak plaques sans amiante Distribuidor de Baspak Revendedor de Baspak Denmark ("Baspak") Firma Burcharth & Sn A/S Egegrdsvej 5, 5260 Odense Telex: 59766 buroil dk - tel.: 66119966 Sweden ("Baspak S" or "Danpak") S. Lvenkjr AB Postbox 65, 28040 Sknes Fagerhult Tlf. : 433-30270 Belgium ("Cerpak") Keramab S.A. Turnhoutsbaan 217, 2100 Deurne - Antwerpen Telex: 31901 - tlf.: 31247015 Germany ("Baspak S" or "Danpak") Rex Postfach 540, 7170 Schwbisch Hall Telex: 74827 - tlf.: 791-2166 France ("Cerpak") Ceram 76, rue de Tournai, 59780 Baisieux Telex: 130974 - tlf.: 20-3496-99 Netherlands ("Cerpak") Selanco bv James Wattweg 24, 3130 ba Vlaardingen Telex: 23416 - tlf.: 010-356788 England ("Cerpak") Witty and Wyatt Gasket Ltd. High Road 895, Chadwell Heath Romford RM6 4HL, Essex Tlf.: 015993971 Rev. 0 Designed
KAMO
Date
27/11/2008
Checked
SGVI
Date
27/11/2008
Approved
HFR
Date
27/11/2008