Вы находитесь на странице: 1из 10

======================== PC Suite for Sony Ericsson Mobile Phones ============== ======= ================================================================================ ===

============================= CONTENTS ============================= 1. System Requirements 2. Supported Personal Information Managers (PIMS) 3. Install/Uninstall 4. USB Driver Software 4.1 DCU-11 4.2 DSS-20 4.3 DSS-25 4.4 USB 5. Configuration 5.1 Sync Settings 5.2 How to connect Sony Ericsson mobile phones for PC connect over Bluetoot h 5.2.1 Connect using the Bluetooth handling application 5.2.2 Connect using Connection Wizard (Sony Ericsson PC Suite application) 6. How to install Sony Ericsson mobile phone modems 6.1 Install Sony Ericsson mobile phone Bluetooth modem 6.2.1 Install Sony Ericsson mobile phone USB modem 6.2.2 Install Sony Ericsson mobile phone DCU-11, DSS-20 and DSS-25 serial mod em 6.2.3 Install Sony Ericsson mobile phone serial modem 6.3 Install Sony Ericsson mobile phone IrDA modem for Windows XP service pa ck 2 and Windows Vista 7. Limitations

===================================================================== 1. SYSTEM REQUIREMENTS ===================================================================== The Sony Ericsson PC Suite is designed to work with Windows XP Home Edition with SP1, Windows XP Professional with SP1, Windows XP Media Center Edition with SP1, Windows Vista Ultimate 32/64 bit, Vista Enterprise 32/64 bit, Vista Business 32/ 64 bit, Vista Home Premium 32/64 bit and Vista Home Basic 32/64 bit The general system requirements are as required by the PC operating system or as a minimum: PC with 500 megahertz or higher processor clock speed recommended 256 megabytes (MB) of RAM or higher recommended 1.5 gigabytes (GB) of available free hard disk space Super VGA (800 x 600) or higher-resolution video adapter and monitor Keyboard and Microsoft Mouse or compatible pointing device Internet Explorer 6.0 or 7.0 have to be installed. The Operating Systems mentioned above will allow Installation while older Operating Systems, e.g. Windows 98, Windows ME, Windows NT and Windows 2000 Professional are blocked.

It is recommended that the PC SW is installed in the same language as the Operating System otherwise trash characters in the applications might be the result, especially for non-latin character languages. ===================================================================== 2. SUPPORTED PERSONAL INFORMATION MANAGERS (PIMS) ===================================================================== The Sony Ericsson PC Suite is designed to work with the following PIMs: Windows Address Book Windows Contacts Outlook 2000 SP-3 or higher Outlook 2002 SP-2 or higher Outlook 2003 sp-1 or higher Outlook 2007 Lotus Notes 5 Lotus Notes 6 Lotus Notes 7 ===================================================================== 3. INSTALL/UNINSTALL ===================================================================== It is recommended that all Windows applications have been closed before the installation is started. To install or uninstall the Sony Ericsson PC Suite the user needs Administrator privileges. If the Sony Ericsson PC Suite installation guide requires a restart of the PC to complete the installation the next user that logs in must be a member of the Administrator group. If no Administrator logs in on the PC the installation will be incomplete. To repair a faulty installation please launch the installation application from the CD or the web package. Choose "Repair" in the next dialog. The original CD or web package is required to complete the repair. You can also perform a repair from Add/Remove programs in Control panel. It is recommended to restart the computer before you do the repair. To uninstall the software launch the installation application from the CD or the web package. Choose "Remove" in the next dialog. The original CD or the web package is required to complete the uninstallation. You can also perform an uninstallation from Add/Remove programs in Control panel or from Start/All programs/Sony Ericsson. It is recommended to restart the computer before and after you do the uninstalla tion. To modify the installation launch the installation application from the CD or the web package. Choose "Modify" in the next dialog. The original CD or the web package is required to complete the modification. You can also perform a modification from Add/Remove programs in Control panel. Pressing SHIFT when the CD is inserted will temporarily disable the Autorun function. For updates visit www.sonyericsson.com ===================================================================== 4. USB DRIVER SOFTWARE

===================================================================== The CD contains driver software for DCU-11, DSS-20, DSS-25 and USB cable. When the cable and phone are connected to the computer the Hardware Wizard will start. Follow the wizard and give the path to the drivers. --------------------------------------------------------------------Note! Signed drivers are installed automatically. For unsigned drivers, the instuctions below apply. --------------------------------------------------------------------===================================================================== 4.1 DCU-11 ===================================================================== The driver software for DCU-11 is located in: <CD/DVD UNIT>\Drivers\DCU-11 The PC Software has a default configuration to use these cables. ===================================================================== 4.2 DSS-20 ===================================================================== The driver software for DSS-20 is located in: <CD/DVD UNIT>\Drivers\DSS-20 The PC Software has a default configuration to use these cables. ===================================================================== 4.3 DSS-25 ===================================================================== The driver software for DSS-25 is located in: <CD/DVD UNIT>\Drivers\DSS-25 The PC Software has a default configuration to use these cables. ===================================================================== 4.4 USB ===================================================================== The driver software for USB is located in: <CD/DVD UNIT>\Drivers\USB Cable\ The PC Software has a default configuration to use these USB cables. ===================================================================== 5. CONFIGURATION ===================================================================== ===================================================================== 5.1 SYNC SETTINGS ===================================================================== Before the first synchronisation, you have to configure the sync settings. Depending on the capabilities of the installed PIM you can choose which data types to sync: Contacts, Calendar, Tasks, Notes and Bookmarks. Please note that synchronisation of Bookmarks is not supported by all mobile phones. It is only possible to change "Sync Manager Settings" while the phone is connected. Field matching between Personal Information Managers (PIM) and phone Several PIMs are supported on the computer.

We will use Microsoft Outlook 2003 as an example when describing field matching between PIM and phone. The phone can only support a limited amount of information, and in the list below we show which fields that are supported. There is also a limitation on field lengths in the phone, therefore long field names will be truncated when displayed in the phone. PIM (Outlook 2003) * Data type: Contacts First name: Last name: Job title: Company: E-mail: Web page address: Home phone: Business phone: Mobile phone: Business fax: Other: Business Street: Business City: Business State/Province: Business ZIP/Postal code: Business Country/Region: Home Street: Home City: Home State/Province: Home ZIP/Postal code: Home Country/Region: Description field: * Data type: Calendar Subject: Location: Start date & time: End date & time: Reminder: Recurrence: Description field: * Data type: Tasks Subject: Due date: Status: Priority: Reminder: Description field: * Data type: Notes Note: Phone Name: (All characters up to first space is taken as first name in phone) Title: Company: E-mail: Web address: Home number: Work number: Mobile number: Fax number: Other number: Business Street: Business City: Business State: Business Zip code: Business Country: Home Street: Home City: Home State: Home ZIP/Postal code: Home Country/Region: Info: Subject: Location: Start date & time: End date & time: Reminder: Recurrent appointment: Description: Subject: Due date: Status: (limited support in phone) Priority: Reminder: Description: Note:

============================================================================ 5.2 HOW TO CONNECT SONY ERICSSON MOBILE PHONES FOR PC CONNECT OVER BLUETOOTH ============================================================================

Preconditions: Supported Windows version installed (please refer to section 1 above). Sony Ericsson PC Suite installed. For external Bluetooth equipment, make sure that the equipment is installed and connect the external Bluetooth equipment to the PC (please check your PC and/or Bluetooth equipment manuals for details). ------------------------------------------------------------------------------------------------------Note! If the Sony Ericsson PC Suite has been installed prior to the BT equipment a Reboot may be needed. ------------------------------------------------------------------------------------------------------===================================================================== 5.2.1 CONNECT USING THE BLUETOOTH HANDLING APPLICATION ===================================================================== Step 1: Activate Bluetooth communication on the phone (please check the phone manual for details). Start the Bluetooth handling application on your PC (different for different vendors, please check your PC and/or Bluetooth equipment manuals for details). Step 2: Search for available Bluetooth devices within range. Step 3: Choose your phone among the devices found. --------------------------------------------Note! Steps 4 and 5 can be in reversed order --------------------------------------------Step 4: Enter a passkey in PC (any key) when asked for it. Answer "Yes" to the "Add to my devices" - question in phone. Step 5: Enter the same passkey in phone when asked for it. Device should now be connected to the PC software. -------------------------------------------------------------------------Note! Widcomm 5.1.0.2700: Additional dialog appears; "Select the services you are interested in". If not already enabled select following services: Dial-up Networking, Serial Port and Obex File Transfer. -----------------------------------------------------------------------------------------------------------------------------------------------------------Note! The PC Suite has an auto enabling function for Bluetooth equipment of newe r version. If you use older Bluetooth equipment without having updated the Bluetooth SW, you might need to perform some additional steps. These steps are described below . ----------------------------------------------------------------------------------Step 6: Search for available services for your phone (please check your PC and/or

Bluetooth equipment manuals for details). Step 7: Choose "Serial Port" connection and then select Connect. Step 8: Information is given about what COM port the serial port connection will use, remember the COM port number. How to find information about the COM port differs between different Bluetooth e quipment, please check your PC and/or Bluetooth equipment manuals for details. Step 9: Go to the Start menu/Settings/Control Panel/Phone Monitor Options/COM ports. Step 10: Mark the COM port you want to use (See Step 8), and set it to "enabled". Step 11: Press Apply and OK. Device should now be connected to the PC software. -----------------------------------------------------------------------------================================================================================ 5.2.2 CONNECT USING CONNECTION WIZARD (SONY ERICSSON PC SUITE APPLICATION) ================================================================================ Start the Connection Wizard application by pressing the "How to connect" icon in Application Launcher and follow the wizard. --------------------------------------------------------------------Note! If no connected device is found press 'Trouble Shooting' to open a text document with trouble shooting information --------------------------------------------------------------------===================================================================== 6 HOW TO INSTALL SONY ERICSSON MOBILE PHONE MODEMS ===================================================================== This chapter will describe how to install different Sony Ericsson mobile phone modems. If you like to use your Sony Ericsson Mobile Phone as a modem over Bluetooth it is recommended that you install Sony Ericsson Bluetooth Modem. ===================================================================== 6.1 INSTALL SONY ERICSSON MOBILE PHONE BLUETOOTH MODEM ===================================================================== Preconditions: Supported Windows version installed (please refer to section 1 above). Sony Ericsson PC Suite installed. Step 1: Go to Start menu/Settings/Control Panel and then double click on "Phone and Modem Options" Step 2: Click the Modem tab. --------------------------------------------------------------------Note! If Widcomm/Broadcomm or Toshiba Bluetooth stack is used, remember the COM port number used by the default Bluetooth Modem (the modem that is installed when pairing the device). ---------------------------------------------------------------------

Step 3: Click Add... Step 4: Tick the "Don't detect my modem; I will select it from a list" checkbox and click Next. Step 5: Select Manufacturer Sony Ericsson Mobile Communications and then select the Sony Ericsson Bluetooth Modem that matches the mobile phone model you wish to use. Click next. Step 6: --------------------------------------------------------------------Note! The following is valid for Widcomm/Broadcomm stack or Toshiba Bluetooth st ack --------------------------------------------------------------------Select the same COM port used by the default Bluetooth Modem (See Step 2) and then click Next. (The result will be that you have two Modems attached to the same COM port. This is OK.) ----------------------------------------------------------------------Note! The following is valid for Windows XP and Windows Vista built-in Bluetooth stack ----------------------------------------------------------------------Select the Bluetooth COM port used as "Serial Port". Information about the COM port number can be found on the COM Ports tab in "Bluetooth Devices" (Start menu/Settings/Control Panel). ----------------------------------------------------------------------Note! For Widcomm 4.0.1.2400 och Widcomm 5.1.0.2700, Step 6 is not OK. Problem: COM port used by the default Bluetooth Modem is not available. Workaround: Use the default Bluetooth Modem. In MNW, when you are about to choose modem, check the "Show all modems" checkbox and select the "Bluetooth Modem". ---------------------------------------------------------------------Step 7: Follow the modem wizard to the end. Step 8: Click OK on the Phone and Modem Options dialog. Your modem should now be successfully installed. ------------------------------------------------------------------------Note! If you don't use Windows XP or Windows Vista built-in Bluetooth stack, you may need to perform some additional steps to use the modem for dial-up networking. These steps are described below. ------------------------------------------------------------------------Step 9: If not already done, follow Steps 1-5 in Chapter 5.2 to connect the mobile phone for PC connect over Bluetooth. Step 10: Search for available services for your phone (please check your PC

and/or Bluetooth equipment manuals for details). Step 11: Choose "Dial-up Networking" and then select Connect. Step 12: Click Cancel in the Connect BluetoothConnection dialog. ===================================================================== 6.2.1 INSTALL SONY ERICSSON MOBILE PHONES USB MODEM ===================================================================== When using USB cable, the USB modem installation is bundled within the actual USB driver installation. This means that no additional modem installation is necessary. ================================================================================ 6.2.2 INSTALL SONY ERICSSON MOBILE PHONES DCU-11, DSS-20 and DSS-25 serial modem ================================================================================ You have to know which COM port is used for the serial modem. To do this, follow these steps. Step 1: Install the DCU-11, DSS-20 and DSS-25 cable by following Windows "Found new Hardware wizard" and provide the appropriate drivers required. Step 2: Go to Start menu/Settings/Control Panel/System. Click the "Hardware tab". Step 3: Click the "Device Manager" button. Step 4: In the Device Manager list, expand the "Ports(COM & LPT)" category. Step 5: In the expanded "Ports(COM & LPT)" list, you should find an entry similar to this one: "SEMC <type of cable used> (COM X). E.g. if you've installed a DSS-25 the entry might look like this: "SEMC DSS SyncStation (COM8)". Remember what COM port number is stated within the parenthesis, because this is the number we are going to install the modem on. ---------------------------------------------------------------------Once we have determined which COM port to use, it is time to proceed with the actual modem installation. This is done in the subsequent steps below. ---------------------------------------------------------------------Step 6: Go to Go to Start menu/Settings/Control Panel and then double click on "Phone and Modem Options" Step 7: Click the Modem tab. Step 8: Click Add... Step 9: Tick the Don't detect my modem; I will select it from a list

checkbox and click Next. Step 10: Select Manufacturer Sony Ericsson Mobile Communications and then select the Sony Ericsson Serial Modem that matches the mobile phone model you wish to use. Click next. Step 11: Select the COM port used for the Serial modem (See step 5) and then click Next. Step 12: Follow the modem wizard to the end. Step 13: Click OK on the Phone and Modem Options dialog. Your modem should now be successfully installed. ===================================================================== 6.2.3 INSTALL SONY ERICSSON MOBILE PHONES SERIAL MODEM ===================================================================== Step 1: Connect your serial cable to one of your PC's physical COM ports and then connect your Sony Ericsson mobile phone to the other end of the serial cable. Remember which COM port you attached the Serial cable to (in most cases it is COM 1 or COM 2) Step 2: Go to Start menu/Settings/Control Panel and then double click on "Phone and Modem Options" Step 3: Click the Modem tab. Step 4: Click Add... Step 5: Tick the Don't detect my modem; I will select it from a list checkbox and click Next. Step 6: Select Manufacturer Sony Ericsson Mobile Communications and then select the Sony Ericsson Serial Modem that matches the mobile phone model you wish to use. Click Next. Step 7: Select the COM port (See step 1) used for the Serial modem and then click Next. Step 8: Follow the modem wizard to the end. Step 9: Click OK on the Phone and Modem Options dialog. Your modem should now be successfully installed. ===================================================================== 6.3 INSTALL SONY ERICSSON MOBILE PHONES IrDA MODEM for Windows XP service pack 2 and Windows Vista

===================================================================== The automatic installation of the infrared (IR) modem starts when you place your Sony Ericsson Mobile Phone, with the infrared port enabled, in front of your PC's infrared eye. Windows will find your device and install the modem automatically. ===================================================================== 7. LIMITATIONS ===================================================================== Synchronisation If there is more data in the PIM than allowed in the phone, the synchronisation will complete successfully, but some items are not synchronised to the phone. It is recommended to check the number of items in the phone from time to time to make sure that there is enough space for new items to be synchronised. Under "Sync Manager -> Settings -> Conflict policy" there is an option "Use the item last modified". This option is only applicable to data types Calendar and Tasks, for data types Contacts and Notes this option will actually result in "Keep item in the PC and overwrite item in the device", since these data types do not support a last changed date.

Вам также может понравиться