Академический Документы
Профессиональный Документы
Культура Документы
Chapter 1 Physical Layer Overview Chapter 2 Physical Layer Key Technology Chapter 3 Physical Layer Procedures
Page 1
Iu
RNS RNS
Iu
Iur
RNC Iub NodeB Iub NodeB Iub NodeB RNC Iub NodeB
GC
C-plane signaling
Nt
DC U-plane information
UuS boundary
control
control control
BMC
L2/BMC
RLC
RLC
RLC
RLC
L2/RLC
PHY
Page 3
Spreading Technology
Spreading consists of 2 steps
Channelization operation, which transforms data symbols into chips. Thus increasing the bandwidth of the signal, The number of chips per data symbol is called the Spreading FactorSF.The operation is done by multiplying with OVSF code Scrambling operation is applied to the spreading signal
Data bit
OVSF code
Scrambling code
Page 7
Channelization Code
OVSF code is used as channelization code
The channelization codes are uniquely described as Cch,SF,k, where SF is the
Scrambling Code
Scrambling code: GOLD sequence Scrambling code period: 10ms ,or 38400 chips There are 224 long and 224 short uplink scrambling codes For downlink physical channels, a total of 218-1 = 262143 scrambling
Page 9
Set 1
Set 511
512 sets
A primary scrambling code and 15 secondary scrambling codes are included in a set.
HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 10
Group 63
Primary scrambling code 6387 512 primary scrambling codes 64 primary scrambling code groups Each group consists of 8 primary scrambling codes
Page 11
Chapter 1 Physical Layer Overview Chapter 2 Physical Layer Key Technology Chapter 3 Physical Layer Procedures
Page 12
Chapter 2 Physical Layer Key Technology Section 1 Physical Channel Structure and Functions Section 2 Channel Mapping
Page 13
carried services, it is divided into two types: Control channel and traffic channel
Transport channel: It is the interface of radio interface layer 2 and physical
layer, and is the service provided for MAC layer by the physical layer. According to whether the information transported is dedicated information for a user or common information for all users, it is divided into dedicated channel and common channel
Physical channel: It is the ultimate embodiment of all kinds of information when
they are transmitted on radio interfaces. Each kind of channel which uses dedicated carrier frequency, code (spreading code and scrambling code) and carrier phase (I or Q) can be regarded as a dedicated channel
Page 14
Logical Channel
Dedicated traffic channel Common traffic channel (DTCH) (CTCH) Traffic channel
Broadcast control channel Paging control channel Dedicate control channel Common control channel
Page 15
Transport Channel
Dedicated Channel (DCH)
(BCH) (FACH)
Paging channel
Random access channel
(PCH)
(RACH)
Page 17
Physical Channel
A physical channel is defined by a specific carrier frequency, code
Physical Channel
Page 18
(Downlink DPCH)
Downlink Common Physical Channel
Common Control Physical Channel (CCPCH) Synchronization Channel Paging Indicator Channel Acquisition Indicator Channel Common Pilot Channel (SCH) (PICH) (AICH) (CPICH)
High-Speed Physical Downlink Shared Channel (HS-PDSCH) High-Speed Shared Control Channel (HS-SCCH)
HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 19
Uplink Dedicated Physical Data Channel (Uplink DPDCH) Uplink Dedicated Physical Control Channel (Uplink DPCCH)
Page 20
Paging channels
S-CCPCH-Secondary Common Control Physical Channel PICH-Paging Indicator Channel
UE
Dedicated channels
DPDCH-Dedicated Physical Data Channel DPCCH-Dedicated Physical Control Channel
Page 21
groups of the cell SSC is chosen from a set of 16 SCH is transmitted at the first 256 chips different codes of length 256, and of every time slot there are altogether 64 SSC PSC is transmitted repeatedly in each sequences correspond to 64 primary time slot scrambling code groups
Slot #0 Slot #1 Slot #14
Primary SCH
ac p ac si,0
256 chips 2560 chips
ac p ac si,1
ac p acsi,14
Secondary SCH
Page 22
Slot # ?
Slot #?
Slot #?
P-SCH
S-SCH
acp 16
256 chips 2560 chips
acp 6
acp 11
..
Group 2 Slot 7, 8, 9
Page 23
Uses the fixed channel code -- Cch,256,0 Scrambled by the primary scrambling code Only one CPICH per cell Broadcast over the entire cell The P-CPICH is a phase reference for SCH, Primary CCPCH, AICH, PICH. By default, it is also a phase reference for downlink DPCH
Pre-defined symbol sequence
Tslot = 2560 chips , 20 bits
Slot #0
Slot #1
Slot # i
Slot #14
1 radio frame: Tr = 10 ms
Page 24
PCCPCH Data
18 bits slot = 2560 chips,20 bits
Slot #0
Slot #1
Slot #14
Page 25
are used to carry paging indicators and the remaining 12 bits are not defined
N paging indicators {PI0, , PIN-1} in each PICH frame, N=18, 36, 72, or 144
If a paging indicator in a certain frame is set to 1, it indicates that UEs associated with
this paging indicator should read the corresponding frame of the associated S-CCPCH
12 bits (undefined)
b 287 b 288 b 299
Page 26
downlink DPCH
Slot #0
Slot #1
Slot #14
Page 27
One or several preambles: each preamble is of length 4096chips and consists of 256 repetitions of a signature whose length is 16 chips, 16 available signatures totally 10 or 20ms message part
Which signature is available and the length of message part are determined by higher layer
Preamble
Preamble
Message part
Preamble
Preamble
Page 28
#1
#2
#3
#4
#5
#6
#7
#8
#9
#10
#11
#12
#13
#14
Access slot #0
Access slot #1
Random Access Transmission Random Access Transmission Random Access Transmission Random Access Transmission
Page 29
Data
Control
Slot # 0
Slot # 1
Slot # i
Slot # 14
Page 30
15 consecutive AS, each of length 40 symbols(5120 chips). Each time slot consists of two partsan Acquisition-Indicator(AI) and a part of duration 1024chips with no transmission
Acquisition-Indicator AI have 16 kinds of Signature
AI part
a0 a1 a2 a30 a31 a32 a33
Unused part
a38 a39
AS #14
AS #0
AS #1
AS #i 20 ms
AS #14
AS #0
Page 31
Page 32
DPDCH
Data N databits
DPCCH
Slot #0 Slot #1
Slot #14
Page 33
(TDM)
Page 34
Slot #0
Slot #1
Slot #14
Page 35
channel
SF=16, can be configured several channels to increase data service
Slot #0
Slot#1 1 subframe: Tf = 2 ms
Slot #2
Page 36
bit) ,channelization code set (7 bit), transport Block size (6bit),HARQ process
number (3bit), redundancy version (3bit), new data indicator (1bit), UE identity (16bit)
HS-SCCH is a fixed rate (60 ksps, SF=128) downlink physical channel used to carry downlink signalling related to HS-DSCH transmission
Slot #0
Slot#1 1 subframe: T f = 2 ms
Slot #2
Page 37
feedback information to the system for scheduling and link adaptation of transport block CQI and ACK/NACK
Physical Channel , Uplink , SF=256, power control
T slot = 2560 chips HARQ-ACK 2 Tslot = 5120 chips CQI
Subframe #0
Subframe #4
Page 38
Chapter 2 Physical Layer Key Technology Section 1 Physical Channel Structure and Functions Section 2 Channel Mapping
Page 39
Page 40
Chapter 1 Physical Layer Overview Chapter 2 Physical Layer Key Technology Chapter 3 Physical Layer Procedures
Page 41
UE uses SSC to find frame synchronization and identify the code group of the cell found in the first step
Scrambling-code identification
UE determines the primary scrambling code through correlation over the CPICH with all codes within the identified group, and then detects the P-CCPCH and reads BCH information
Page 42
k:th S - CCPCH
#9
#10
#11
#12
#13
#14
t DPCH,n
n:th DPCH
10 ms
Page 43
Set Preamble_Initial_Power
Send a preamble
No AI Choose a access slot again Check the corresponding AI Get positive AI Choose a signature and increase preamble transmit power The counter of preamble retransmit Subtract-1, Commanded preamble power increased by Power Ramp Step Increase message part power by p -m based on preamble power Get negative AI
Counter> 0 & Preamble powermaximum allowed power<6 dB N Set physical status to be Nack on AICH received
END
Page 44
1. Derive the available uplink access slots, in the next full access slot set, for the set of available RACH sub-channels within the given ASC. Randomly select one access slot among the ones previously determined. If there is no access slot available in the selected set, randomly select one uplink access slot corresponding to the set of available RACH sub-channels within the given ASC from the next access slot set. The random function shall be such that each of the allowed selections is chosen with equal probability
2. Randomly select a signature from the set of available signatures within the given ASC 3. Set the Preamble Retransmission Counter to Preamble_ Retrans_ Max
Page 45
6. If no positive or negative acquisition indicator (AI +1 nor 1) corresponding to the selected signature is detected in the downlink access slot corresponding to the selected uplink access slot:
A: Select the next available access slot in the set of available RACH sub-channels within the given ASC B: select a signature C: Increase the Commanded Preamble Power D: Decrease the Preamble Retransmission Counter by one. If the Preamble Retransmission Counter > 0 then repeat from step 6. Otherwise exit the physical random access procedure
Page 46
Page 47
Page 48
Transmit Diversity-STTD
Space time block coding based transmit antenna diversity(STTD
b0 b1 b2 b3
Antenna 1
b0 b1 b2 b3
-b 2 b 3 b 0 -b 1 Antenna 2 Channel bits STTD encoded channel bits for antenna 1 and antenna 2.
Page 50
Transmit Diversity-TSTD
Time switching transmit diversity (TSTD) is used only on SCH channel.
Slot #0
Slot #1
Slot #2
Slot #14
ac p
Antenna 1
(Tx OFF)
acp acsi,2
ac p aci,14 s
ac s
i,0
(Tx OFF)
(Tx OFF)
acp
i,1 acs
(Tx OFF)
(Tx OFF)
Antenna 2
(Tx OFF)
(Tx OFF) (Tx OFF)
Page 51
Summary
Page 52
Thank You
www.huawei.com