Академический Документы
Профессиональный Документы
Культура Документы
ARM7 is high performing,low power consuming RISC based microcontroller. Heart of ARM7 CPU is instruction Pipeline.
Features of ARM7
32-bit ARM7 in 64/144 pin package. 16 kB on-chip Static RAM. 128/256 kB on-chip Flash Program Memory. On-chip crystal oscillator with an operating range of 1 MHz to 30 MHz. Embedded ICE-RT interface enables breakpoints and watch points. 2/4 interconnected CAN interfaces with advanced acceptance filters. 4/8 channel (64/144 pin package) 10-bit A/D converter. Two 32-bit timers,PWM unit, Real Time Clock and Watchdog. Multiple serial interfaces including two UARTs (16C550), Fast I2C (400 kbits/s).
Pin Configuration
Registers of ARM7
The central set of registers are a bank of 16 user registers R0 R15 each of these is 32 bits wide. R0 R12 are user registers in that they do not have any specific other function. The Registers R13 R15 do have special functions in the CPU. R13 is used as the stack pointer (SP). R14 is called the link register (LR). R15 is the program counter (PC)
GSM/GPRS Module
GSM/GPRS Modem
GSM/GPRS MODEM is a class of wireless MODEM devices that are designed for communication of a computer with the GSM and GPRS network. It requires a SIM (Subscriber Identity Module) card just like mobile phones to activate communication with the network and IMEI (International Mobile Equipment Identity) number for their identification. The MODEM requires AT commands, for interacting with processor or controller, which are communicated through serial communication. Different AT commands supported by the MODEM can be sent by the controller to interact with the GSM and GPRS cellular network and the MODEM sends back a result after it receives a command.
Other Peripherals
Thank you