Академический Документы
Профессиональный Документы
Культура Документы
a. ωf = 2.0 rad/s
Derive a formula, then plug in numbers!
b. ωf = 4.0 rad/s
c. ωf = 6.0 rad/s
d. ωf = 8.0 rad/s
e. ωf = 9.0 rad/
The next four questions refer to the following situation:
2. Compare the initial kinetic energy of the system Ki (child at edge) with the final
kinetic energy of the system Kf (child at center).
a. Ki > Kf
b. Ki = Kf
c. Ki < Kf
The next four questions refer to the following situation:
V
5. What (which) quantity(ies) remain(s) unchanged during the collision between the dart
and the stick?
a. V = 2ω0 L
b. V = 3ω0 L
1
c. V = ω0 L
2
3
d. V = ω0 L
2
5
e. V = ω0 L
2
nail
The next three questions refer to the following situation:
V
7. If the dart instead strikes and gets stuck in the middle of the stick, after the collision
how would the new angular velocity of the stick-dart system about the nail, ω1, compare
with ω0 assuming the initial horizontal speed of the dart, V, is the same?
a. ω1 > ω0
b. ω1 = ω0
c. ω1 < ω0
The next two questions refer to the following situation:
8. What is the net torque, τ, about the contact point between the disk and the floor just
after the disk is released?
a. τ = 3.75 N-m (into the page) Derive a formula, then plug in numbers!
b. τ = 7.5 N-m (out of the page)
c. τ = 11.25 N-m (out of the page)
d. τ = 17.5 N-m (into the page)
e. τ=0
The next two questions refer to the following situation:
9. What is the speed, v, of the disk’s center of mass when it reaches the spring’s
equilibrium position (that is, after the disk has moved a distance of 1 m to the left and the
spring is not stretched)?
Derive a formula, then plug in numbers!
a. v = 1.73 m/s
b. v = 2.74 m/s
c. v = 4.32 m/s
d. v = 2.24 m/s
e. v = 3.87 m/s
10. A hoop is hung on a nail, displaced to the position
shown, and released from rest in the presence of the
earth’s gravitational field. Ignoring any frictional
effects, what quantity (ies) is (are) conserved after the
hoop is released?
a. Mechanical energy
b. Angular momentum about the nail
c. Momentum
d. Kinetic energy
e. Angular momentum and kinetic energy g
11. A disk is rotating counterclockwise with an initial Initial angular
angular velocity, ωo. A force, F, is exerted on the rim velocity,ωo, when
of the disk in a direction vertically downward as Force is applied
shown. What is the direction of the angular
acceleration, α?
F
12. A uniform disk of mass M, and radius R has
string wound around its rim. One end of the
String tied to ceiling and
string is tied to a ceiling. The disk is released wound around rim of disk
from rest in the configuration shown. What is the g
magnitude of the disk’s acceleration, a, in terms
of g?
Disk of radius R
a. a=g and mass M
b. a = (1/2)g
c. a = (1/3)g
d. a = (2/3)g
e. a = (3/4)g
13. A uniform bar of mass M and length L is free to rotate about a pivot located (1/3)L
from the left end as shown. Two forces of equal magnitude are applied to the ends of the
bar as shown. What is the direction of the angular acceleration of the bar?
L/3 2L/3
14. A car is initially at rest, then undergoes acceleration and reaches speed of
v = 15 m/s in 5 seconds. The radius of its tires is r = 0.30 m. What is the angular
acceleration, α, of the tires?
a. α = 10.0 rad/s2
DRAW A PICTURE!
b. α = 15.0 rad/s2
c. α = 20.0 rad/s2
Derive a formula, then plug in numbers!
The next question refers to the following situation:
A
L
B
L
C
15. Three identical point particles, each of mass m, are shaped into a triangle by three
identical massless rods. About which of the shown axes is the momentum of inertia
smallest?
a. A
b. B
c. C
The next question refers to the following situation:
m, R m, R
L
16. A baton is made of a massless rod and two identical uniform, solid spheres. The mass
and the radius of the spheres are m and R. The distance from the center of one sphere to
the center of the other one is L. If the baton is rotating about an axis that is perpendicular
to the rod and passing through the center of mass, what is the moment of inertia I? In this
case the radii of the masses are not small compared with the separation of the masses.
a. I = 2mR 2
(
b. I = 2m R 2 + L2 )
4 1
c. I = m R 2 + L2
5 2
2
d. I = m R 2 + L2
5
2
e. I = m R 2 + 2 L2
5
A
g
17. At B, what is the speed, v, of the sphere
h v
B
2
a. v = 2gh 3 +
5 C
2
b. v = 3gh1 + L
5
A
g
h v
B
18. Now, together with the solid uniform sphere, a hollow sphere with the same mass
and radius rolls down the ramp. After they leave the ramp at B, they fall on the ground at
different locations, CS and CH, for the solid and the hollow sphere, respectively. The
horizontal distances from CS and CH to the ramp are LS and LH. Which distance is larger?
a. LS > LH
b. LS < LH DRAW A PICTURE!
c. The distances are the same.
The next two questions refer to the following situation:
L=1m
Derive a formula,
M=1kg
90° then plug in numbers!
35°
M=1kg
19. In case 1, what is the magnitude of the torque τ1 around the hinge due to gravity?
a. τ1 = 1096 Nm
b. τ1 = 4.90 Nm
c. τ1 = 9.81 Nm
d. τ1 = 11.77 Nm
e. τ1 = 14.72 Nm
The next two questions refer to the following situation:
L=1m
M=1kg
Derive a formula,
90° then plug in numbers!
35°
M=1kg
20. Compare the magnitude of the torque in case 1, τ1, to the magnitude of the torque in
case 2, τ2:
a. τ1 > τ2
b. τ1 < τ2
c. τ1 = τ2
The next two questions refer to the following situation: d2 = ?
d1 = 1.7 m
kg, is located 1.7 meters to the left of the fulcrum, and a mass, M2 m = 60 kg
= 12 kg, is located an unknown distance, d2, to the right of the
fulcrum. You may assume the size of the masses is small
compared with d1 and d2 (i.e. you may treat M1 and M2 as point
masses).
Derive a formula, then plug in numbers! L/2 = 2m
21. The system is balanced and is observed not to move. What is d2?
a. d2 = 1.050 m
b. d2 = 1.275 m
c. d2 = 1.500 m
d. d2 = 1.700 m
e. d2 = 1.855 m
The next two questions refer to the following situation: d2 = ?
d1 = 1.7 m
kg, is located 1.7 meters to the left of the fulcrum, and a mass, M2 m = 60 kg
= 12 kg, is located an unknown distance, d2, to the right of the
fulcrum. You may assume the size of the masses is small
compared with d1 and d2 (i.e. you may treat M1 and M2 as point
masses).
Derive a formula, then plug in numbers! L/2 = 2m
22. Mass 2 is suddenly removed. At this point in time, what is the magnitude of the
instantaneous acceleration, a, of mass 1?
a. a= 2.41 m/s2
b. a= 5.66 m/s2
c. a= 7.83 m/s2
d. a= 9.81 m/s2
e. a= 12.41 m/s2
The next two questions refer to the following situation:
tension = T
d
A mass M hangs from a massless beam of length L. The beam
is fixed to the wall with a hinge, and the beam is held up by a
wire that is attached to the end of the beam and anchored in the
wall a distance d above the hinge. The beam makes a right
angle with the wall.
M
23. What is the tension, T, in the wire?
L
d
a. T = Mg
L+d
d
b. T = Mg
L
L2 + d 2
c. T = Mg
d2
L
d. T = Mg
d
L2
e. T = Mg 1 + 2
d
The next two questions refer to the following situation:
tension = T
d
A mass M hangs from a massless beam of length L. The beam
is fixed to the wall with a hinge, and the beam is held up by a
wire that is attached to the end of the beam and anchored in the
wall a distance d above the hinge. The beam makes a right
angle with the wall.
M
24. If d is changed and the length of the wire is adjusted to keep the beam at right angle
to the wall (M and L remaining the same), what happens to the tension in the wire?