Академический Документы
Профессиональный Документы
Культура Документы
Teknik Kendaraan Ringan Semester 1nd Class X Dasar Kompetensi Kejuruan SK-KD 1TH
TARGET OF LESSON
Student understand how to make something with stell Student understand machine process
CASTING
CASTING
Casting is a pour liqiud material process (steell or plastic) in the cast to make machine component
CASTING PROCESS
expandable
Nonexpandable
casting process
print ready
7 Teknologi dan Rekayasa
C. SIFTING
D. SEPARATION MAGNETIC E. SAND COOLIN
8 Teknologi dan Rekayasa
Expandable mold casting is a generic classification that involves sand, plastic, shell, plaster, and molding investment (lostwax technique). This method involves the use of molds and mold as disposable
SAND CASTING
10
PLASTER CASTING
Casting with a cast almost the same as sand casting except in the plaster changed with sand.
Gypsum mixture consists essentially of 70-80% 20-30% gypsum and gypsum and water reinforcement.
11
Using the casting of concrete, not plaster casting, allows us to make a carving, fountain, or outdoor seating. Next is to create a sink (washstands) is interesting, washstands and shower stalls with a diverse mix of colors will produce an interesting pattern as it appears on the marble / ravertine
12
CENTRIFUGAL CASTING
Centrifugal casting forming their own power using sand molds are played with constant velocity
DIE CASTING
Die casting is a metal printing process using a very high emphasis on low temperature
Die casting
14 Teknologi dan Rekayasa
VELOCITY COOLING
Speed in the cooling property affecting cast, quality and microstructure. Cooling speed is controlled by the print media.
15
16
MACHINE PROCESS
Machining process is like a metal cutting process
The process of cutting with a pressing machine Conventional cutting process with machine tools Unconventional cutting process.
Cutting process using pressing machine: the cutting (shearing), pressing (pressing) and withdrawals (drawings, elongating). Conventional cutting process with the process of machine tools including lathe (turning), the process frais (milling), and sekrap (shaping). Unconventional cutting process for example by machine EDM (Electrical Discharge Machining) and wire cutting
17
MACHINE PROCESS
Some machining process: 1. Lathe (Turning / Lathe) 2. Frais (Milling) 3. Sekrap (Planning, Shaping) 4. Drill (Drilling) 5. Grinding (Grinding) 6. Drilling (Boring) 7. Pelubang (Punching Press) 8. Surface Grinding (Surface Grinding
18
CHIPS FORMATION
The types and forms of chips process machining at the time began to take shape
19 Teknologi dan Rekayasa
CHIPS FORMATION
CHIPS FORMATION
CHIPS FORMATION
Cutting areas that described the current lines. When the workpiece material moves from one piece of material to the slide, then cut off, and then became chips
22 Teknologi dan Rekayasa
CHIPS FORMATION
Schematic drawings of chips formation analogous to the shift of a deck of cards
23
HEAT PROCESSING
Rolling
Rolling Machine
Red-hot steel bars, transformed into useful products through the rolling Forging Forging hammer, forging stricken, upset forging, press forging, and forging rolls. One result of the process of refining the grain processing is caused by recrystallization.
24 Teknologi dan Rekayasa
25