Академический Документы
Профессиональный Документы
Культура Документы
WHAT IS LED?
IT IS DIODE WHICH EMITS LIGHT OF REQUIRE COLOUR WHEN FORWARD BIASED
DOPING MATERIAL, WAVELENGTH AND OPERATING VOLTAGE FOR COLOUR EMITTED BY LED
Colour
Wavelength
Voltage
Semiconductor Material Aluminium gallium arsenide (AlGaAs) Gallium arsenide phosphide (GaAsP) Aluminium gallium indium phosphate (AlGaInP) Gallium(III) phosphide (GaP) Gallium arsenide phosphide (GaAsP) Aluminium gallium indium phosphide (AlGaInP) Gallium(III) phosphide (GaP) (AlGaP) Indium gallium nitride (InGaN) / Gallium(III) nitride (GaN) Gallium(III) phosphide (GaP) Aluminium gallium indium phosphide (AlGaInP) Aluminium gallium phosphide
RED
Yellow
Green
CLS Unit
AC I/P
BX110 V AC NX110 V AC
ECR
DC I/P
BX110 V AC
ECR
AC I/P
BX110 V AC NX110 V AC
ECR
DC I/P
NO PHANTOM EFFECT
NO FOCUSING REQUIRE
A good quality LED emits nominated colour only There is very remote possibility that it may emits wrong colour if biased current changes
Fuse
Front View
Rear View
Any type of relay recommended (metal to carbon/ metal to metal )by Railway board can be use There is a recommended ECR for LED signal The selection of jumper on the UCR shall be as per ECR used.
Mai n
Relay Contacts 3F/3B 3F/3B front 2,12,13 & back 3,4 ,14 4F/B, front A1/A2 to D1/D2 Back A3/A4 toD3/D4 4F/B ,front A1/A2 to D1/D2 Back A3/A4 toD3/D4 3F/3B ,Front A1/A2,D1/D2 & D3/D4 Back A3/A4, A5/A6 &D5/D6 4F/B , front A1/A2 to D1/D2 Back A3/A4 toD3/D4 4F/B , front A1/A2 to D1/D2 Back A3/A4 toD3/D4
108/110ma
QECX61 QECR2 YES YES YES YES 80 &55ma YES YES YES YES 108 & 72 ma
Rest conventional ECR are not suitable for LED signal Reference RDSO Latter Nob .STS/E EL-LED Dated 02.06.2006
Quality LEDs
Sensors
Poly-carbonet Dom
120 lux DC & 15% +25% appro. 600Mts 125% of AC Input of 110 lux noise 300 current immuni volts 15% +25% regulator ty 60 AC & current 50 lux -15% 400Mts Volts regulation +25% 2% & 50 lux -15% Direct +25% 200Mts 30 lux -15% +25%
gives out lunar white light beam gives out yellow light beam gives out lunar white light beam
REAR VIEW
REAR VIEW
It for main aspect only Placed inside CLS unit I/P 110 20 volts AC/DC O/P 125% of I/P & always DC O/P Current regulation 2 %
Calling ON signal
Shunt signal
Supply constant regulate current to LED SIGNAL UNIT DC Scope for approxim adjustment of circuit ate current to suite pick 125% of up current of ECR I/P & Scope for adjustment current to suite cascaded and regulation non-cascaded aspect margin control circuit. 2% Regulates current as per feedback from LED signal unit
Out put
Function
Inbuilt
Shunt signal
Supply constant regulate current to LED SIGNAL UNIT DC Scope for approxim adjustment of circuit ate current to suite pick 125% of up current of ECR I/P & Scope for adjustment current to suite cascaded and regulation non-cascaded aspect margin control circuit. 2% Regulates current as per feedback from LED signal unit
PROVISION OF LED SIGNAL IN EXISTING FILAMENT LAMP CLS OUTDOOR ARRANGEMENT Items to be removed from CLS unit:
CLS Transformer & Lamp MECR (if provided) Lamp holder & clamp assembly inner & Outer lens
Items to be fitted:
Current Regulator LED light unit
Signal transformer
MECR
Thanks you