Академический Документы
Профессиональный Документы
Культура Документы
WIRELESS TRANSMISSION
Now a days there is a Rapid development of autonomous electronics like Laptops, Cell-phones, House-hold robots and all those devices typically rely on chemical energy storage(Battery) As they are becoming daily needs to present generation, Wire less energy transfer would be useful for many applications as above and they need midrange energy
INTRODUCTION
The term wireless transmission stands for interchange of power, electricity, data or any other type of information. According to the electrical point of view, transmission lines are used for transmitting power supply. But there is a major risk of electrical hazards like short circuits, power failure, & breakdown of transmission lines. So, we have suggested an innovative idea to overcome all these electrical hazards. JUST REMOVE THE TRANSMISSION LINES ! For this, we have used microwaves .
HOW IT WORKS ?
Here, the power (electricity) generated at sub-station goes to the transmitter, which works like the principle of microwave oven This transmitter converts the electricity into microwaves & transmit them to our service towers When these transmitted waves reach at the desired tower, (HOME TOWER), the receiver of home tower receives these microwaves & converts them into electricity.The electricity is utilized for our home appliances.
MPT METHOD
MICROWAVE POWER TRANSMISION ( MPT ) method is the use of microwaves to transmit power through outer space or the atmosphere without the need for wires. In 1964, William C. Brown demonstrated a miniature helicopter equipped with a combination antenna & rectifier called as rectenna. The rectenna converted microwave power into electricity , allowing the helicopter to fly. In principle, rectenna is capable for very high conversion efficiencies over 90% in optimal circumstances. Most proposed MPT systems includes a phased array microwave transmitter. They have advantage of being electrically steered and easier to scale the necessary levels that a practical MPT system requires.
Wireless switching
Now further we can use the microwaves received by our home tower for wireless switching also By using wireless switching, we can make the whole transmission wireless....from sub-station to our home appliances. There is no need of electrical wires to control our electric home appliances like fans, tube lights, washing machines etc