Confidentiality level on title master Version number on title master MNP FLOW (STP)
Prepared by Nilesh Patil
Confidentiality level on slide master Version number on slide master Presentation title in footer 2 28 June 2014
MSS IDP ( Called GT= IN gt, Calling GT=MSS gt, CdPN) SPGTRUL: SPGTTRL= IDPM_INT table (Called GT= IN gt Present ) PRETRUL table (Normalization of CdPN to International number) 1) NPENTRY table( CdPN=TPROF No) 2) TPROF table ( TPRON No =LRN) LRN inserted before CdPN IDP ( Called GT= IN gt, Calling GT=MSS gt, LRN+CdPN) SPGTRUL:SPGTTRL= INTINT table (Called GT= IN gt routed to IN) IN Connect (LRN+CdPN) MOC PREPAID Call FLOW. SPRDOM SCCP Routing Domain. IDPM_DOM SPCLDPAA /E Called Party Address SSN-SPC selector SPCLDPAA /E Called Party Address SSN-SPC SPGTPART Partition Parts(Select GT translator IDPM_INT) SERVPROF (select service logic sequence and how the call control shell formats response message) NP SERVICE LOGIC SERVSEL (will match SSID,ACN,Service Key,Event detection point and select Assoc. service prof Idpm) STP Confidentiality level on slide master Version number on slide master PREPAID Call FLOW. 1) When a prepaid customer makes MO call , IDP is generated by MSS with Called party address(CdPA) as IN GT and Calling party address(CgPA) as MSS GT and it also contains Called party number ( CdPN).
2) When STP receives the Message , it forwards to SPRDOM (SCCP routing domain ) table for traffic partitioning.
3) In SPRDOM table, domain IDPM_DOM is selected as SPRDOM type Local sccp Linkage is selected which mean all SCPs of the network belong to this domain, except for those defined in SPRDOM type Remote sccp Linkage. In Next analysis step, further routing on called party address (SPCLDPAA table = IDPM) is specified.
4) In SPCLDPAA table, next step analysis as default routing is defined for messages which do not fulfill any conditions in SPCLDPAAE table of the SPCLDPA.
5) In SPCLDAPAAE table list of Called SSN is specified with next step analysis as SPUOCA table. If Called SSN of the messages is present in the list , the defined SPUOCA(User operation codes) is selected else default routing is performed.
6) In SPUOCA table, next step analysis as default routing is defined for messages which do not fulfill any conditions in SPUOCAE table of the SPUOCA.
7) SPUOCAE table specifies list of operation codes which are taken into account during this step with next step analysis as SPGTPART table. In this case Operation Code IDP is considered .
8) In SPGTPART ,on basis of SPUOCAE IDPM partition is selected and SPGTTRL IDPM_INT is selected.
Confidentiality level on slide master Version number on slide master PREPAID Call FLOW Continued.
9) In SPGTRUL table , IN GT is defined with SPGTTRL IDPM_INT and routed to SELF#4 i.e own database. Message is then sent to SERVSEL table.
10) In SERVSEL table, depending upon below parameter service profile (SERVPROF=IDPm) is selected. a) Subsystem Identifier Depends upon "called SSN and SSN-SSID relationship defined in SPSSN . b) ACN Selector - Depends upon Application context name found in TCAP and AC name AC selector relationship defined in ACN table. c) Service Key - Depends upon parameter service key found in the operation Initial DP. d) Event Detection Point - Depends upon parameter event type BCSM found in Initail DP.
11) Depending upon serivice profile IDPm properties , Cause value and Service no are selected.
12) Service No defines the service logic to be used. For prepaid call, Service No 6 is used which indicates Manipulate service, IN IDP messages are relayed onwards after substitution of CdPN. Then it is sent to NP application.
13) In PRETRUL table , Normalization of CdPN takes place to International Number and CdPN is sent to NPENTRY table . In NPENTRY table, CdPN (prefix or complete) will be associated with TPROF No.
14) In TPROF table ,LRN associated with TPROF No will be dipped in CdPN ( 91+LRN+CdPN.)
15) IDP is relayed to IN with CdPA as IN GT and CgPA as MSS GT and Called party number as 91+LRN+old CdPN.
16) IN will send a Connect message in Reply with Called party number as 91+LRN+old CdPN.
Confidentiality level on slide master Version number on slide master
POSTPAID Call FLOW. MSS IDP ( Called GT= STP gt, Calling GT=MSS gt, CdPN) Connect (LRN+CdPN) MOC IAM SRI to HLR SPRDOM SCCP Routing Domain. IDPM_DOM SPCLDPAA /E Called Party Address SSN-SPC SPGTPART Partition Parts(Select GT translator IDPM_INT) SPGTRUL:SPGTTRL=IDPM_INT table (Called GT= STP gt Present ) SERVSEL(will match SSID,ACN,Service Key,Event detection point and select Assoc. service prof QOD) SERVSEL(will match SSID,ACN,Service Key,Event detection point and select Assoc. service prof Idpm) NP SERVICE LOGIC PRETRUL table( Normalization of CdPN to International number) 1) NPENTRY table( CdPN=TPROF No) 2) TPROF table ( TPRON No =LRN) LRN inserted before CdPN SPGTRUL:SPGTTRL= INTINT table (Called GT= MSS gt routed to IN) STP Confidentiality level on slide master Version number on slide master Postpaid Call FLOW. 1) When a Postpaid customer makes MO call , IDP is generated by MSS with Called party address(CdPA) as STP GT and Calling party address(CgPA) as MSS GT and it also contains Called party number ( CdPN).
2) When STP receives the Message , it forwards to SPRDOM (SCCP routing domain ) table for traffic partitioning.
3) In SPRDOM table, domain IDPM_DOM is selected as SPRDOM type Local sccp Linkage is selected which mean all SCPs of the network belong to this domain, except for those defined in SPRDOM type Remote sccp Linkage. In Next analysis step, further routing on called party address (SPCLDPAA table = IDPM) is specified.
4) In SPCLDPAA table, next step analysis as default routing is defined for messages which do not fulfill any conditions in SPCLDPAAE table of the SPCLDPA.
5) In SPCLDAPAAE table list of Called SSN is specified with next step analysis as SPUOCA table. If Called SSN of the messages is present in the list , the defined SPUOCA(User operation code) is selected else default routing is performed.
6) In SPUOCA table, next step analysis as default routing is defined for messages which do not fulfill any conditions in SPUOCAE table of the SPUOCA.
7) SPUOCAE table specifies list of operation codes which are taken into account during this step with next step analysis as SPGTPART table. In this case Operation Code IDP is considered .
8) In SPGTPART ,on basis of SPUOCAE IDPM partition is selected and SPGTTRL IDPM_INT is selected.
Confidentiality level on slide master Version number on slide master Postpaid Call FLOW Continued.
9) In SPGTRUL table , STP GT is defined with SPGTTRL IDPM_INT and routed to SELF#4 i.e. own database. Message is then sent to SERVSEL table.
10) In SERVSEL table, depending upon below parameter service profile (SERVPROF=QOD) is selected. a) Subsystem Identifier Depends upon "called SSN and SSN-SSID relationship defined in SPSSN . b) ACN Selector - Depends upon Application context name found in TCAP and AC name AC selector relationship defined in ACN table. c) Service Key - Depends upon parameter service key found in the operation Initial DP. d) Event Detection Point - Depends upon parameter event type BCSM found in Initial DP.
11) Depending upon service profile QOD properties , Cause value and Service no are selected.
12) Service No defines the service logic to be used. For prepaid call, Service No 0 is used which indicates QOD service, handling the trigger event Query on digits. Then it is sent to NP application.
13) In PRETRUL table , Normalization of CdPN takes place to International Number and CdPN is sent to NPENTRY table . In NPENTRY table, CdPN (prefix or complete) will be associated with TPROF No.
14) In TPROF table ,LRN associated with TPROF No will be dipped in CdPN ( 91+LRN+CdPN.)
15) STP will send a Connect message in Reply with Called party number as 91+LRN+old CdPN.
Confidentiality level on slide master Version number on slide master Presentation title in footer 8 28 June 2014 SMSC MSS
MO forwardSM MO forwardSM SRI for SM Request SPRDOM SCCP Routing Domain.) SRI_DOM SPCLDPAA /E Called Party Address SSN-SPC SPGTPART Partition Parts(Select GT translator SRI_SM_INT) SPGTRUL( SPGTTRL Name=SRI_SM_INT,GT Address Info.=919/918/917,SPGTCRUL Name=TT0TOTT11,SPGTTRLREF Name=SRI_SM_INT11 SPGTCRUL : SPGTCRUL Name=TT0TOTT11,Addr.Info Conv.Rule=+1DT, TTID=TTID : TTID : Translation Type 11; ( TT 0 converted to TT 11 and 1D prefixed to CdPA) SPGTRUL : SPGTTRL Name=SRI_SM_INT11,GT Address Info.=1D,Possible Ported No.=TRUE; PRETRUL table( 1D is removed from CdPA ) 1) NPENTRY table( CdPA=TPROF No) 2)TPROF table ( TPRON No =ownLRN) own LRN inserted before CdPA SPGTRUL( SPGTTRL Name=SRI_SM_INT11,GT Address Info.=91,SPGTCRUL Name=TT11TOTT0SPGTTRLREF Name=SRI_SM_INT SPGTCRUL : SPGTCRUL Name=TT11TOTT0, TTID=TTID : TTID : Translation Type =unknown; ( TT 11 converted to TT 0) SPGTCRUL : SPGTCRUL Name=CANGT, Addr.Info Conv.Rule=.S; ( Called Party address removed from SRI Req ) SRI for SM Request HLR SPGTRUL( SPGTTRL Name=SRI_SM_INT,GT Address Info.=91+ownLRN+NDC Prefix,SPGTCRUL Name=CANGT,SPENS=route towards HLR; SRI for SM Response MT_FSM SMS Call flow ( To Own subscriber) Confidentiality level on slide master Version number on slide master 1) When a customer makes MO SMS , MO forwardSM request is sent to SMSC by MSS via STP . SMSC then sends SRI for SM to HLR via STP.( CdPA = B party no, CgPA = SMSC GT,CdPN)
2) When STP receives the Message , it forwards to SPRDOM (SCCP routing domain ) table for traffic partitioning.
3) In SPRDOM table, domain SRI_DOM is selected as for SPRDOM type Remote sccp Linkage SMSC SPC is defined for SRI_DOM. In Next analysis step, further routing on called party address (SPCLDPAA table = SRI_CLD) is specified.
4) In SPCLDPAA table, next step analysis as default routing is defined for messages which do not fulfill any conditions in SPCLDPAAE table of the SPCLDPA.
5) In SPCLDAPAAE table list of Called SSN is specified with next step analysis as SPUOCA table. If Called SSN of the messages is present in the list , the defined SPUOCA(User operation code) is selected else default routing is performed.
6) In SPUOCA table, next step analysis as default routing is defined for messages which do not fulfill any conditions in SPUOCAE table of the SPUOCA.
7) SPUOCAE table specifies list of operation codes which are taken into account during this step with next step analysis as SPGTPART table. In this case Operation Code Short message gateway services is considered .
8) In SPGTPART ,on basis of SPUOCAE SRI_AC partition is selected and SPGTTRL SRI_SM_INT is selected.
SMS Call flow ( To Own subscriber) Confidentiality level on slide master Version number on slide master
9) In SPGTRUL table, for SPGTTRL SRI_SM_INT, 919,918 and 917 are defined with GT translation rule(SPGTCRUL) TT0TOTT11 and referenced to SPGTTRL SRI_SM_INT11.
10) In SPGTCRUL table , as per TT0TOTT11 rule translation type is changed from TT0 to TT11 and 1D is prefixed to Called Party Address (CdPA).
11) In SPGTRUL table for SPGTTRL SRI_SM_INT11 for GT Add Info 1D,Possible ported No flag is assigned TRUE . So the message is sent to NP application for dipping.
12) In PRETRUL table 1D is removed from the received CdPA and sent to NPENTRY table . In NPENTRY table, CdPA (prefix or complete) will be associated with TPROF No.
13) In TPROF table ,LRN associated with TPROF No will be dipped in CdPA and new Called party address will be 91+ownLRN+CdPA.
14) In SPGTRUL table for SRI_SM_INT11 ,GT Add info 91 is defied with SPGTCRUL TT11TOTT0 and referenced to SPGTTRL SRI_SM_INT.
15) In SPGTCRUL table , as per TT11TOTT0 rule translation type is changed from TT110 to TT0.
16) In SPGTRUL table for SPGTTRL SRI_SM_INT ,91+OWN LRN +NDC will be routed to respective HLR with SPGTCRUL CANGT i.e. LRN is removed before routing to HLR.
17) SRI Request is forwarded to HLR .
2) When STP receives the Message , it forwards to SPRDOM (SCCP routing domain ) table for traffic partitioning.
3) In SPRDOM table, domain IDPM_DOM is selected as SPRDOM type Local sccp Linkage is selected which mean all SCPs of he network belong to this domain, except for those defined in SPRDOM type Remote sccp Linkage. In Next analysis step, further routing on called party address (SPCLDPAA table = IDPM) is specified.
4) In SPCLDPAA table, next step analysis as default routing is defined for messages which do not fulfill any conditions in SPCLDPAAE table of the SPCLDPA.
5) In SPCLDAPAAE table list of Called SSN is specified with next step analysis as SPUOCA table. If Called SSN of the messages is present in the list , the defined SPUOCA(User operator is selected else default routing is performed.
6) In SPUOCA table, next step analysis as default routing is defined for messages which do not fulfill any conditions in SPUOCAE table of the SPUOCA.
7) SPUOCAE table specifies list of operation codes which are taken into account during this step with next step analysis as SPGTPART table. In this case Operation Code IDP is considered .
8) In SPGTPART ,on basis of SPUOCAE IDPM partition is selected and SPGTTRL IDPM_INT is selected.
SMS Call flow ( To Own subscriber) Continued.
Confidentiality level on slide master Version number on slide master Presentation title in footer 11 28 June 2014 SMSC MSS
MO forwardSM MO forwardSM SRI for SM Request SPRDOM SCCP Routing Domain.) SRI_DOM SPCLDPAA /E Called Party Address SSN-SPC SPGTPART Partition Parts(Select GT translator SRI_SM_INT) SPGTRUL( SPGTTRL Name=SRI_SM_INT,GT Address Info.=919/918/917,SPGTCRUL Name=TT0TOTT11,SPGTTRLREF Name=SRI_SM_INT11 SPGTCRUL : SPGTCRUL Name=TT0TOTT11,Addr.Info Conv.Rule=+1DT, TTID=TTID : TTID : Translation Type 11; ( TT 0 converted to TT 11 and 1D prefixed to CdPA) SPGTRUL : SPGTTRL Name=SRI_SM_INT11,GT Address Info.=1D,Possible Ported No.=TRUE; PRETRUL table( 1D is removed from CdPA ) 1) NPENTRY table( CdPA=TPROF No) 2)TPROF table ( TPRON No =LRN) LRN inserted before CdPA SPGTRUL( SPGTTRL Name=SRI_SM_INT11,GT Address Info.=91,SPGTCRUL Name=TT11TOTT0SPGTTRL REF Name=SRI_SM_INT SPGTCRUL : SPGTCRUL Name=TT11TOTT0, TTID=TTID : TTID : Translation Type =unknown; ( TT 11 converted to TT 0) SRI for SM Request GMSC SPGTRUL( SPGTTRL Name=SRI_SM_INT, GT Address Info.=91LRN, SPRNS= routed towards GMSC SMS Call flow ( To Foreign subscriber) SRI for SM Request POI Confidentiality level on slide master Version number on slide master 1) When a customer makes MO SMS , MO forwardSM request is sent to SMSC by MSS via STP . SMSC then sends SRI for SM to HLR via STP.( CdPA = B party no, CgPA = SMSC GT,CdPN)
2) When STP receives the Message , it forwards to SPRDOM (SCCP routing domain ) table for traffic partitioning.
3) In SPRDOM table, domain SRI_DOM is selected as for SPRDOM type Remote sccp Linkage SMSC SPC is defined for SRI_DOM. In Next analysis step, further routing on called party address (SPCLDPAA table = SRI_CLD) is specified.
4) In SPCLDPAA table, next step analysis as default routing is defined for messages which do not fulfill any conditions in SPCLDPAAE table of the SPCLDPA.
5) In SPCLDAPAAE table list of Called SSN is specified with next step analysis as SPUOCA table. If Called SSN of the messages is present in the list , the defined SPUOCA(User operation code) is selected else default routing is performed.
6) In SPUOCA table, next step analysis as default routing is defined for messages which do not fulfill any conditions in SPUOCAE table of the SPUOCA.
7) SPUOCAE table specifies list of operation codes which are taken into account during this step with next step analysis as SPGTPART table. In this case Operation Code Short message gateway services is considered .
8) In SPGTPART ,on basis of SPUOCAE SRI_AC partition is selected and SPGTTRL SRI_SM_INT is selected.
SMS Call flow ( To Foreign subscriber) Confidentiality level on slide master Version number on slide master
9) In SPGTRUL table, for SPGTTRL SRI_SM_INT, 919,918 and 917 are defined with GT translation rule(SPGTCRUL) TT0TOTT11 and referenced to SPGTTRL SRI_SM_INT11.
10) In SPGTCRUL table , as per TT0TOTT11 rule translation type is changed from TT0 to TT11 and 1D is prefixed to Called Party Address (CdPA).
11) In SPGTRUL table for SPGTTRL SRI_SM_INT11 for GT Add Info 1D,Possible ported No flag is assigned TRUE . So the message is sent to NP application for dipping.
12) In PRETRUL table 1D is removed from the received CdPA and sent to NPENTRY table . In NPENTRY table, CdPA (prefix or complete) will be associated with TPROF No.
13) In TPROF table ,LRN associated with TPROF No will be dipped in CdPA and new Called party address will be 91+LRN+CdPA.
14) In SPGTRUL table for SRI_SM_INT11 ,GT Add info 91 is defied with SPGTCRUL TT11TOTT0 and referenced to SPGTTRL SRI_SM_INT.
15) In SPGTCRUL table , as per TT11TOTT0 rule translation type is changed from TT110 to TT0.
16) In SPGTRUL table for SPGTTRL SRI_SM_INT ,91+LRN will be routed to core node with which POI is present.
17) SRI Request is forwarded to respective core node which will further process it .
2) When STP receives the Message , it forwards to SPRDOM (SCCP routing domain ) table for traffic partitioning.
3) In SPRDOM table, domain IDPM_DOM is selected as SPRDOM type Local sccp Linkage is selected which mean all SCPs of he network belong to this domain, except for those defined in SPRDOM type Remote sccp Linkage. In Next analysis step, further routing on called party address (SPCLDPAA table = IDPM) is specified.
4) In SPCLDPAA table, next step analysis as default routing is defined for messages which do not fulfill any conditions in SPCLDPAAE table of the SPCLDPA.
5) In SPCLDAPAAE table list of Called SSN is specified with next step analysis as SPUOCA table. If Called SSN of the messages is present in the list , the defined SPUOCA(User operator is selected else default routing is performed.
6) In SPUOCA table, next step analysis as default routing is defined for messages which do not fulfill any conditions in SPUOCAE table of the SPUOCA.
7) SPUOCAE table specifies list of operation codes which are taken into account during this step with next step analysis as SPGTPART table. In this case Operation Code IDP is considered .
8) In SPGTPART ,on basis of SPUOCAE IDPM partition is selected and SPGTTRL IDPM_INT is selected.