Академический Документы
Профессиональный Документы
Культура Документы
Aims of session:
To set SMART targets in the form of clear Objectives
To acquire new knowledge and skills
Develop ideas
Increase understanding
Challenge and inspire learners
Assessment of knowledge
Guide and support learning
Objectives of learner:
To be checked at close of session and ticked if completed
6.To participate and contribute in fling the teacher quiz game with correct responses.
Objectives met
STUD PARTITIONS
A stud partition is by far
the easiest way of
dividing one large room
into two, and as long as
all the principles are
understood, planning
permission may
sometimes be required.
Rockwool Sound Insulation
If the partition is to be
positioned directly over
a single joist it is
simpler.
However if the joist in
question does not
conform to
requirements, then it
would need to be
reinforced with a
second joist (supported
from wall to wall) next
to it,
Before work begins, checks
should be made to ensure
that there are no electric
cables, water or gas pipes
running along or across the
joists in the path of the
proposed partition, which
could be damaged in the
course of construction.
Larger Image
Making a Start (tight areas)
Upthe Wall
Before the head plate can be fixed in
position, lift the two end upright studs
that will be fixed
Their
position is established on the walls
by drawing two vertical lines up from
each end of the sole plate up to ceiling.
Liftthe head plate and place it onto the
Studs, carefully raise both the uprights
and head plate together, until the head
plate is up to the ceiling
When studs are in position, secure them
to the head and sole by skew-nailing.
References
Match all the
questions with the
appropriate answer
Top Tip :
The answers could be
within your theory notes