The compressive strength of 100 mm cube as compared to 150 mm cube is always .
a) less b) more
c) equal d) any of the above Lever arm that is the distance between??
1.Centroid of compressive force to tensile force
2.Centroid of member to centroid of compressive force
3.Centroid of member to tensile force
4.Top to centroid of member To ensure uniform pressure distribution, the thickness of foundation is kept?
1.Uniform throughout
2.Increased towards the edges
3.Decreased towards the edge
4.None of these Water proofing compounds in concrete?
1.Bring the sand particles closer together
2.Fill the voids more throughly
3. Drive out water from the mix quickly
4. Develop a impervious layer on concrete surface
Spacing of counterforts depends upon??
1.The height of wall
2. Allowable unit pressure on soil
3.Relative cost of steel and concrete
4.None of these A setting of cement or concrete which occurs suddenly while being mixed and placed, and prevents further working of the materials, is called??
1.Flash set
2.Knocking Setting
3.Initially setting
4. Quick setting If the coefficient of hardness of coarse aggregate is less(below 13),it indicates the given aggregate is??
1.High quality
2.Low quality
3.Medium
4.None of these
Low temperature during concrete laying........
1.Increse the strength
2.Has no affect on strength
3.Decrease the strength
4.None of these
Lab splices of tension reinforcement in Rcc beam is allowed in.....??
1.Less than 25 mm dia
2.Less than 20 mm dia
3.Bars less than 36 mm dia
4.All diameters bars Distribution reinforcement in a simply supported slab is mainly provided to distribute..??
1.Shrinkage stress
2.Dead load
3.live load
4.Temperature stress Which among the following is a property of Silt?
1.Plasticity
2.Limited or no Plasticity
3.Elasticity
4.None of these Which of the following obstacles obstructs chaining but not ranging?
1.Lake
2.Railway Track
3.Hillock
4.Building The overall length of the vehicle affects all of the following EXCEPT..
1.Overtaking time
2.Off Tracking
3.Sight Distance
4.Turning radii of the curve Presence of 0.25 percentage sugar in water for concreting is likely to result in..