Вы находитесь на странице: 1из 14

UNIVERSITI KUALA LUMPUR

INTERNATIONAL COLLEGE

INDUSTRIAL TRAINING
PRESENTATION
MUHAMMAD FARHAN BIN ROSLAN
50213113531
UNIVERSITI KUALA LUMPUR
(INTERNATIONAL COLLEGE)

DYNAC ENGINEERING SDN.


BHD.

INTRODUCTION
DYNAC ENGINEERING SDN. BHD.
COMPANY BACKGROUND:
- 30 years experience in HVAC systems industry.
- Dynac wide range products and services goes from
oil and gas, chemical refinery, rig building industry
to telecommunication.
- Main headquarter is at Tanjung Langsat
Primary Activities:
- HVAC systems (Heating, Venting, Air Conditioning)
- ACHE (Air Cooled Heat Exchangers)
- Cable Support System
- LV Switchgear and Telekom JKH.

DYNAC ORGANISATION CHART

PHILOSOPHY
With the dedication and wills of the staffs nothing
is too sophisticated or small for DYNAC. We have
proven in the past that we shall stand as the rest
of the well established companies.
The wealth of experiences and resources are a
tremendous asset to keep ourselves continue
growing. In addition, hopefully our efforts
contribute to the industries could assist our
country in early achievement of Vision 2020.

AIR COOLED HEAT


EXCHANGER (ACHE)
Air cooled heat exchanger is the equipment used to reduce
the temperature of process medium by transferring the
heat to the surrounding air.
Type of ACHE
- Forced Draught
- Induced Draught
- Natural Draught
- Forced Draught With Air Recirculation
ACHE Mainly Used:
- Offshore (Upstream)
- Refineries (Downstream)
- Petrochemical Complexes
- Power Generation plants.

HOW ITS WORK?

An air-fin exchanger is, in principle, exactly the same as the


radiator of a car engine.
The fluid to be cooled passes through the tubes while air is
blown (forced draught), or pulled (induced draught), over
the tubes by a fan or fans causing cooling of the fluid.
The tubes may be plain or finned depending upon process
requirements. Cooling control can be either by variable pitch
fan blades or by variable speed or on/off motor, all of which
will vary the amount of air flow across the tubes.
Tube bundle
Header box

Plenum

Fan ringSupport
structure

ACTIVITIES
Project/Job Task:
i) 3D design using Autodesk AutoCAD for
Bergading Complex Project. (Hess Exploration
And Production Malaysia)

Summary Of Activities
Able to implement things that had be learned in
class
Able to understand Air Cooled Heat Exchanger
Design and work principle
Able to read 2D drawing of ACHE
This project is related to some mechanical
subject:i- Design Engineering 2
ii- Engineering Mechanics Statics
iii- Engineering Mechanics Solid
iv- Heat Transfer

ACTIVITIES
Project/Job Task:ii) Make a analysis and calculation for lifting lug for
Petronas
Kumang Cluster (SK-500) project Air cooled heat
exchanger.

Summary Of Activities
Able to implement what had been study in class
Able to understand the standards used for the
calculation and design in ACHE such as:i) ASME (American Society Of Mechanical Engineers)
standards
ii) API (American Petroleum Institute) standards
iii) AISC (American Institute for steel structure) standard
iv) PTS (Petronas Technical Standard)

This task is related to some mechanical subject


such as:i) Engineering Mechanics Statics
ii) Engineering Mechanics - Solid
iii) Engineering Design 2

APPENDIX

Header Box
Support Structure, Fan
Ring
And Plenum

Lifting Lug
Hydro Test running in
top side of AFC (Air Fin
Cooler)

Air Fin Cooler Fully


Assemble

Shell And Tube heat


exchangers

THANK YOU

Вам также может понравиться