Академический Документы
Профессиональный Документы
Культура Документы
Concrete
Contents
Introduction
Composition of reactive powder
concrete(RPC)
Properties of RPC
Application of RPC
Advantages & disadvantages of RPC
Case study
Conclusion
References
INTRODUCTION
RPC was first developed by P. Richard and
M. Cheyrezy.
RPC was first produced in the early 1990s
by researchers at Bouygues laboratory in
France and the worlds first RPC structure,
the Sherbrooke Bridge in Canada was
constructed in July 1997.
continue
Objectives of developing
RPC
Elimination
of
coarse
aggregate
for
enhancement of homogeneity .
Utilization of pozzolanic properties of silica
fume.
Optimal usage of super plasticizer to reduce
W/C and at the same time improves
compaction .
Post- set heat treatment for enhancement
of the microstructure.
Addition of small sized steel fibers to
improve ductility.
..continue
continue
PROPERTIES
OF
RPC
COMPRESSIVE STRENGTH
-Higher compressive strength than
normal Concrete.
-It is a factor linked with durability of
material.
-Maximum compressive strength of RPC is
approximately 200MPa.
continue
FLEXURAL
STRENGTH
WATER ABSORPTION
HOMOGENITY
Improved by eliminating all coarse
aggregates.
Dry components for use in RPC is less
than 600 micro meter .
WATER PERMEABILITY
7. COMPACTNESS:
Application of pressure before and during
concrete setting period.
8. MICROSTRUCTURE:
Microstructure of the cement hydrate
can be changed by applying heat
treatment during curing.
9. MATERIAL DUCTILITY:
Material ductility can be improved
through the addition of short steel fibres.
conclusion
The reactive powder concrete produced by
routine concrete manufacture techniques has
compressive strength above 160 MPa,
bending strength above 20 MPa, fine frost
resistance, and impermeability of chloride .
The sidewalk flat system produced by the
reactive powder concrete has light
deadweight, low cost, and the littler
workload, which makes it suitable for bridge
and its subsidiary facilities on the QinghaiTibet plateau.
THANK YOU