Академический Документы
Профессиональный Документы
Культура Документы
RUBBER
GASKETS
FOR
WATERTIGHT
JOINTS
SINGLE OFFSET
O-RING PROFILES
THINK SAFETY
1st
Gasket Types
O-Ring
Circular Profile
Single Off-Set
Triangular Profile
Gasket Types
Single Off-Set
O-Ring
Circular Profile
Triangular Profile
Assembly method of
these 2 gaskets is
NOT the same
O-RING
Lube gasket and lube spigot
BEFORE installing gasket
onto spigot
Lube spigot
AFTER putting
on the gasket
SINGLE
OFFSET
Lift Pins
GAP
SHOULDER
SHOULDER
Push gasket
against
shoulder
or groove
Go completely
around the
structure to
insure the gasket
is stretched
evenly around
the joint.
Step 3 Lubrication
Proper
Lube
Use clean lube
Step 3 Lubrication
Generously
Lube
the
Bell
LUBE INSIDE THE
BELL
Step 3 Lubrication
Generously Lube
For SINGLE
OFFSET, place lube
on top of gasket
AFTER ASSEMBLY
onto spigot
For O-RING, lube
spigot and lube gasket,
THEN ASSEMBLE onto
spigot.
Step 3 Lubrication
Generously Lube the Gasket
REMEMBER!
For Single Off-Set Gaskets.
Lube goes ON
TOP of Gasket
Do NOT Place Lube
on a Bare Spigot
KEEP THE
STRUCTURE LEVEL
AND PLUMB
SAFETY 1st
CLEAN, INSPECT JOINTS
PLACE GASKET - EQUALIZE
LUBRICATE
SET PRECAST ENSURE LEVEL
RE-INSPECT
REMEMBER
O-RING
Lube spigot
AFTER installing
gasket
SINGLE
OFFSET