Академический Документы
Профессиональный Документы
Культура Документы
Switch2
Suggested Configuration
Multi
mode
VIF
Simplified Diagram
Single Mode VIF
over two multi
mode VIF
Two multimode
VIF
Filer
Interface
s
Critical Issue - 2
ISSUE:
Critical Issue 3
Description: When performing ontap upgrade, the installation image
will be selected according to the hardware model, for ex., if you install
3000 series image in 6000 series filer, then OS images on compact
flash card will corrupt.
Issue: Tell them that by mistake, wrong platform OS image was
installed on the filer
How did you help: Tell them that to resolve this issue you have
performed netboot. I,e. booting the filer from network image
Installation: After file is booted then you have performed installation
using upgrade procedure. You can find the attached document for
Micros oft Office
your reference.
Word Document
Critical Issue - 4
Description: In block based access, the IO is performed based on
the defined block size. For ex. Solaris uses 8K block, VxVFS used
2K,4K,8K based on the file system size, Linux uses 4K and netapp
uses 4K blocks by default.
Issue: If we give lun to VMWare hosts all the block size should be
properly defined. Ie, If netapp uses 4K block, then ESX should use 4K
block and Guest Virtal Disk should also use 4K block. Then only the
performance will be better
Action: Just tell them that the poor performance was identified due
to lun misalignment. And you have suggested to correct the same.
Please find the attached PDF for more details.
Adobe Acrobat
Document
Critical Issue 5
Metro Cluster DR
Practice Guide