Академический Документы
Профессиональный Документы
Культура Документы
2 Release Training
CR8165: Class of Service for Recipient Range Routing
Functionality
The Class Of Service (COS) for Recipient Address Range Routing (RARR)
functionality includes RARR in the COS access control scheme.
Any RARR range can be equipped with a COS service identifier (COS_ID).
This RARR range COS_ID will be evaluated during Recipient COS (RCOS)
validation of messages, for which RARR has been applied.
Messages that do not comply to the RCOS access control settings
will be rejected by the SMSC upon submission.
This is new functionality for SMSC V 5.2.
Functionality (2)
During RCOS evaluation of messages,
for which RARR has been applied:
the COS service identifier (COS_ID) of
the recipient service provider (i.e. the
RARR range),
is matched with the RCOS access control
settings of the service client (i.e. the
message originator).
Originator
RARR range
RCOS
COS_ID [1]
Interworking
COS_ID [3]
Large Account
COS_ID [2]
Functionality (3)
During RCOS evaluation of messages,
for which RARR has been applied:
the COS service identifier (COS_ID) of
the recipient service provider (i.e. the
RARR range),
is matched with the RCOS access control
settings of the service client (i.e. the
message originator).
Originator
RARR range
RCOS
COS_ID
Interworking
to network
Network
recipient
Functionality (4)
Determination of the RCOS access control settings of the originator
will take place according to the existing COS mechanism.
(This includes e.g. COS settings from the subscriber address group and
subscriber profile.)
RCOS access control for messages destined to network recipients is new
functionality. RCOS was restricted to Large Account recipients prior to this
feature.
Configuration example
To enable COS and RARR (both licensed options) for the SMSC:
PML> SET CLASS COS_COMMON
/COS_ENABLED=ON
/MAX_RANGE_SHORTNUM=10
Add some Large Account (LA) that participates in COS and RARR, e.g.:
PRL> ADD LARGE_ACCOUNT 3333 1.1.1.1 SMPP_TCPIP /SYSTEM_ID=LA3333 _PRL> /COS_RESTRICT=YES /TCOS=0xFFFFFFFFFFFFFFFF
_PRL> /RARR_ALLOWED=YES
Configuration example
To add some RARR range that participates in COS, e.g.:
PRL> ADD RANGE 3000-3100 SHORT_NUMBER LA 3333 /COS_ID=27
Installation
The COS for RARR functionality relies on the installation of both the COS and
RARR licensed options.
No additional installation is needed.
Troubleshooting
Trace possibilities
The rejection of submitted messages due to this functionality
is shown in the SMSC tracing of the involved SSD entity.
Error reply
The error reply of the SMSC to the message originator
indicates that the message is RCOS restricted.
Test
Quick verification
Install and configure the COS and RARR licensed options.
Create a Large Account and RARR range (that routes towards the Large Account)
and apply the RCOS service settings as stated in the configuration example before.
Configure the RCOS access settings of a subscriber NOT to support this RARR
RCOS service.
Submit a message from the mobile, addressing the RARR range.
Verify that the submission is rejected.