Академический Документы
Профессиональный Документы
Культура Документы
RESIDENTIAL COMPLEX
Ajay Singh
117056
ACKNOWLEDGEMENT
I am thankful to my faculties Prof. S.C Sharma,
Abhishek Kumar and Rikshit Kumar, who support me
in every aspect whichever possible. All teachers of
civil and urban engineers who brought me to my
present performance and shape me like this during
the last three successive years.
I am very thankful to Amit Buildwell Pvt. Ltd. for
having given me the opportunity to undertake my
four month training in their working area and
putting their earnest trust in me while handing me
responsibilities
ABSTRACT
This is a presentation in precise-spectrum in which I try to
explain my four month experience in my hosting company.
The content is briefly explained and it is constructed from the
practical basis.
In the beginning I give a short info of our company. And
explained briefly about our project on which we are working on
with its site plans.
After that, I have explained my overall training familiarity in
the last successive months. This is main part of the training
report what I have been doing and what was happening on the
site.
INTRODUCTION OF COMPANY
Amit Buildwell Private Limited is a Private Company
incorporated on 14 October 2005. It is classified as Indian
Non-Government Company and is registered at Registrar of
Companies, Delhi.
Directors of Amit Buildwell Private Limited are Anil Kumar,
Ramesh Kumar Yadav and Anil Kumar Yadav.
The company has successfully executed the works for the
construction of commercial and residential complexes.
Raheja Mall
JMD Galleria
Taksila Heights ( Current Project )
Highlights
FLOOR PLANS
SITE MAP
BRICKWORK
a) The bricks shall be locally available kiln
burnt bricks of generally regular and
uniform size, shape & colour. The
bricks shall be free from cracks, chips,
flaws, lumps. They shall be tested as per
IS standers.
b) The size of brick shall normally 230 mm
x 110 mm x 76 mm.
c) The bricks should be thoroughly soaked
in clear water . It helps to remove dirt,
dust and other soluble salts which causes
efflorescence.
d) After that, they are laid with the paste of
cement mortar in English bond pattern.
e) Proper curing should be done.
BLOCKWORK
Characteristics of Blocks
PLASTER
THICKNESS OF PLASTER
Location of Plaster
Cement-sand Ratio
External wall
1 : 5 to 1 : 4
Internal wall
12 to 15
1:6
Ceiling
6 to 8
1:4
DOORS
Location of door
Width
Length
Main door
1050
2300
At Bedroom
900
2100
At toilet
750
2100
COMPONENT OF DOOR
Frame
Lintel and sill
Shutter
Panel
Stile
Rail
Tools Needed
Spirit level
Screwdriver
Tape measure
A wooden mallet or a hammer
Saw
Wood glue
Screws
Set square
WINDOWS
Selection of Windows
Wind loads
Site conditions
Thermal comfort
Energy Values
Aesthetical conditions
DIMENSIONS OF WINDOWS
Location
Width (mm)
Length (mm)
2000
2300
1500
2300
Toilet Window
600
1300
Kitchen Window
1200
1250
FLOORING
The flooring used are Wooden Flooring over IPS and Tiles
Placing of tiles
THANK
YOU