0 оценок0% нашли этот документ полезным (0 голосов)
261 просмотров4 страницы
Totaline copper pipe specifications for R410A refrigerant include annealed coil and hard drawn straight copper with 99.9% copper content and controlled phosphorus levels between 0.015-0.040%. Tubes are cleaned through evaporation and capping to leave less than 0.038g/m2 residual. Minimum wall thicknesses are specified in tables based on tube type and diameter. All tubes undergo electronic testing using eddy current methods to ensure integrity and meet ASTM standards for medical gas systems if applicable.
Totaline copper pipe specifications for R410A refrigerant include annealed coil and hard drawn straight copper with 99.9% copper content and controlled phosphorus levels between 0.015-0.040%. Tubes are cleaned through evaporation and capping to leave less than 0.038g/m2 residual. Minimum wall thicknesses are specified in tables based on tube type and diameter. All tubes undergo electronic testing using eddy current methods to ensure integrity and meet ASTM standards for medical gas systems if applicable.
Totaline copper pipe specifications for R410A refrigerant include annealed coil and hard drawn straight copper with 99.9% copper content and controlled phosphorus levels between 0.015-0.040%. Tubes are cleaned through evaporation and capping to leave less than 0.038g/m2 residual. Minimum wall thicknesses are specified in tables based on tube type and diameter. All tubes undergo electronic testing using eddy current methods to ensure integrity and meet ASTM standards for medical gas systems if applicable.
TOTALINE COPPER SPECIFICATIONS FOR R410A Annealed coil and hard drawn straight Chemicals UNS. C112200 (Cu 99.9%, P 0.015-0.040%) Cleanness Tubes are cleaned, evaporated and capped. Any residual shall be less than 0.038g/m Min Wall Thickness The recommended minimum wall thickness is shown in the Table A and B below. Tube Integrity All tubes are electronically tested by Eddy Current method, to the requirement of ASTM E243 Safety Medical gas system tubing conforming to ASTM B819 or equivalent.
Why Totaline 410 A Copper
COPPER TUBE SPECIFICATIONS ( Pan Cake Soft Copper)
Why Totaline 410 A Copper
COPPER TUBE SPECIFICATIONS ( Hard Drawn Copper Tubes)