0 оценок0% нашли этот документ полезным (0 голосов)
23 просмотров17 страниц
Casting is used to make complex parts that are difficult to machine. Castings can range in size from as small as 10 grams to as large as 200,000 kilograms. Design considerations for castings include keeping stressed areas in compression, rounding external corners, maintaining uniform section thickness when possible, avoiding very thin sections depending on the casting process, and preventing metal concentration at junctions.
Casting is used to make complex parts that are difficult to machine. Castings can range in size from as small as 10 grams to as large as 200,000 kilograms. Design considerations for castings include keeping stressed areas in compression, rounding external corners, maintaining uniform section thickness when possible, avoiding very thin sections depending on the casting process, and preventing metal concentration at junctions.
Casting is used to make complex parts that are difficult to machine. Castings can range in size from as small as 10 grams to as large as 200,000 kilograms. Design considerations for castings include keeping stressed areas in compression, rounding external corners, maintaining uniform section thickness when possible, avoiding very thin sections depending on the casting process, and preventing metal concentration at junctions.
Size of the send casting can be as small as 10g and as large as 200 k kg Basic considerations of casting Always keep the stressed areas of parts in compression (a)Original component (b)Use of Tie-rod (c)Use of Bearing-cap Round all external corners Wherever possible, the section thickness throughout should be held as uniform as compatible with overall design considerations Avoid very thin sections It depends upon the process of casting such as sand casting , permanent mould casting or die casting Min. thickness for grey cast iron component is about 7mm up to 500 mm Avoid concentration of metal at the junctions Short blast the parts wherever possible k y o u T h a n