Академический Документы
Профессиональный Документы
Культура Документы
Bhushan Yeola
Omkar Salvi
Ankita Patil
Guided by:
Prof. C. M. Chaudhari
7 Limitations
8 Applications
9 Futurescope
10 References
11 References
Cont..
Introduction
In day today life as the population is increasing rapidly,
the demand for vehicles is also increasing. Also the
problem of theft is increasing with a great speed. Hence
vehicle theft has been a severe problem around the globe
along with professional thieves.
In our project the Fingerprint Scanner is used, where we
can compare the thumb print of the driver with the
predefined prints. If the thumb of the driver does not
match with the owner of the vehicle then the image of
the thief is send to the user.
Objective of the project
NEED OF THE WORK:
In this proposed system, we are developing a
vehicle security system which will
automatically disable the ignition for
unauthorized drivers.
The system will compare the image of the
person driving and will compare them with the
saved data, if he is authorized then the vehicle
will be accessed and if the person is
unauthorized then he wont be able to access the
car.
Outcome of literature survey
Raspberry Pi 2
It is the main heart of the system it is used to control all the
system. It having ARM 11Core with BCM Audio-Video
Codec used to provide the GPIO's with having operating
frequency 700MHz.
The Raspberry Pi is a series of credit card-sized
single-board computers developed in the United Kingdom
by the Raspberry Pi Foundation to promote the teaching of
basic computer science in schools and developing countries
.
Hardware
Hardware Description
The Raspberry Pi hardware has evolved through several
versions that feature variations in memory capacity and
peripheral-device support.
This block diagram depicts Models A, B, A+, and B+. Model A,
A+, and the Pi Zero lack the Ethernet and USB hub components.
The Ethernet adapter is internally connected to an additional
USB port. In Model A, A+, and the PI Zero, the USB port is
connected directly to the system on a chip (SoC). On the Pi 1
Model B+ and later models the USB/Ethernet chip contains a
five-point USB hub, of which four ports are available, while the
Pi 1 Model B only provides two. On the Pi Zero, the USB port is
also connected directly to the SoC, but it uses a micro USB
(OTG) port.
SOFTWARE IMPLEMENTATION
2 Software used:
Embedded Linux with GNU
Advantages
ANY QUESTIONS ?