Академический Документы
Профессиональный Документы
Культура Документы
Submitted by
Mr. Sandeep. H Ms. Madhumati S.H
Mr. Santosh G. Sanadi Ms. Shradha P. Sutar
Mr. Raghavendra R. Kamble Ms. Asmita P. Mane
oFeatures
oAdvantages & Disadvantages
oApplications
oResults, Conclusion
INTRODUCTION
Our project name is SCADA for electrical power utilities . SCADA stands for
Supervisory Control and Data Acquisition. The purpose of this project is to acquire
the remote electrical parameters like voltage, current and send these values over
RF network using module along with the temperature at power station. This project
is also designed to protect the electrical circuitry.
This system is used to identify the faults in transformer and transmission line.
Faults in transformer are Like Transformer fire blast, Tran. Over temp., C.B.
tripped, Line open, Street light ON, Repair work, power ON, Pole cut, etc
In this system all this fault in Tran. are identified & these faults are
immediately given to power station through RF signals in the form of MESSAGE.
Then in power station alarm will ON & in particularly which section fault is
occurred is identified & next procedure of repair is done.
By this system lots of time can be saved. Also man power required for
supervision is minimized.
HARDWARE DESCRIPTION
Buzzer
To circuit
POWER
SUPPLY
BLOCK DIAGRAM OF RECEIVER
Receiving
Aerial LCD
Wireless
MICROCONTRO
R.F
LLER
Receiver ALARM
POWER
SUPPLY
SOFTWARE DESCRIPTION
4.3 Proteus:
Proteus is software which accepts only hex files. Once the
machine code is converted into hex code, that hex code has
to be dumped into the microcontroller and this is done by the
Proteus.
ADVANTAGES
Device can be operated wirelessly using RF communication.
Continuous operation.
Provide rapid response to emergencies.
Low power consumption.
Reliable & efficient.
Few operators can control large no. of individual assets.
Means few no. of labors required.
low cost design.
Time will be saved.
APPLICATIONS
This system can be implemented in industries.
This system can be used to monitoring and controlling the
transformers.
This system can be used in power distribution system.
Fire detection automation.
Water heater automation.
Automatic electric automation.
FUTURE SCOPE
In future we can use this project in several applications by
adding additional components to this project.
This project can be extended by using GPRS technology,
which helps in sending the monitored and controlled data to
any place in the world. The temperature controlling systems
like coolant can also use in places where temperature level
should be maintained.
By connecting wireless camera in industries, factories etc
we can see the entire equipments from our personal
computer only by using GPRS and GPS technology.
CONCLUSION
From the knowledge of SCADA one can know the
energy distribution pattern & identifying the major energy
wasting areas. Integrating features of all the hardware
components used have been developed in it , thus
contributing to the best working of unit.