MATERIAL SEMINAR WATER BARS Water bars are flexible waterstops based on plasticized PVC produced in specific profiles to seal construction and expansia joints when cast in concrete. They are available in a range of diff sizes and types according to their use. 1. The density of water bar is 13 kg
2. Tensile strength is greater than
13 N / mm2 for longitudinal and greater than 12.5 N / mm for transverse Profiles of water bars CENTER STOP centrally placed water bars O type section in used in expansion, contraction and construction joints, The bulb in the center allows for movement the structure to become accommodated fot. The water stops are easily anchored to the steel reinforcement usif special tie-clips, REARGUARD CONSTRUCTION
The externally placed rearguard
water classes are AR section used in construction and construction joints compression centrally fin assist placed fin assists with shutter locations, REARGUARD EXPANSION The externally placed rearguard Water bars DR section are designed with a flat top box section, with a protruding to assist with positioning and to provide a chair to support the joint filler. The section is used in expansion joints to accommodate movement. Applications 1. surface water bars: Installed in the face of the concrete structure The water bar is usually fixed on the water side of the concrete wall or floor, by attaching it temporarily to formwork using fixing wire. The protruding ribs are cast in the concrete to provide a excellent watertight seal as well as secure anchoring the water bar to the structure. 2. Internal water bars: The water bar is fitted in split formwork or shutting down. Use fixing wire or tie-clips to attach water bar to internal reinforcement 3. Welding Water bars are made from thermoplastic Pvc and can therefore be welded. The ends are heated with on-the-welding equipment until the pvc becomes plastic and then it is immediately water bars, the prefabrication of cross, T, land corner pieces, Advantages of water bars (i) Multi-rib sections provide a tortuous path and impenetrable water check. (ii)Easy to fix using tie-chips. (iii)Easy on-site welding. (iv)High strength PVC material.
The Various Graphs Shown Below of Road From 0M To 500M and Each Graph Are Plotted Are Every 30M of Interwal in Auto CAD 2016 Fo Finding The Utting and Filling Area