Академический Документы
Профессиональный Документы
Культура Документы
Parts of
the
Microscope
www.middleschoolscience.com
NO NAME OF PART FUNCTION
COARSE ADJUSMENT FOCUSES THE IMAGE UNDER LOW POWER
1
SHARPENS THE IMAGE UNDER HIGH AND LOW
FINE ADJUSMENT
2 MAGNIFICATION
CONTAINS THE LENS WITH THE LOWER POWER
LOW POWER OBJECTIVE
3 MAGNIFICATION
CONTAINS THE LENS WITH THE MOST POWER
HIGH POWER OBJECTIVE
4 MAGNIFICATION
Objectives:
1. Raise the microscope tube.
2. Start with the low power objective
lens.
3. Adjust the reflector to introduce the
light into the microscope.
4. Place a slide right under the objective
lens.
5. To compare plant and animal cells
5. Notice the image through the oculer lens
6. By using the coarse adjustment, move the
objective lens closer to or farther from object
7. Adjust images position so as to be seen in
the middle of the observation field
8. If the image is not yet seen, we have to repeat
steps 3 and 4
9. If the image is not clearly seen ,do use hight
power objective lens
5. Notice the image through the oculer lens
6. By using the coarse adjustment, move the
objective lens closer to or farther from object
7. Adjust images position so as to be seen in
the middle of the observation field
8. If the image is not yet seen, we have to repeat
steps 3 and 4
9. If the image is not clearly seen ,do use hight
power objective lens
10. Pay attention the distance between
objective lens and the specimen, when
changing from low-power to hight-power
objective lens
11. Dont expose the mirror directly to the sun,
because the sunlight will be reflected to
your eyes and may affect your vision
12. Be careful when using a cover glass. It
breaks easily and may hurt your hand.
Analysis:
1. How does the letter e as seen through
the microscope differ from the way an e
normally appears?
2. When you move the slide to the left, in
what direction does the letter e appear to
move?
When you move it to the right? Up? Down?
3. How does the ink appear under the
microscope compared to normal view?
4. Why does a specimen placed under the
microscope have to be thin?
Procedure: Part 2 - Cheek Cell
Analysis:
1. Why did we add iodine to our cheek cells?
2. What structure in the cheek cell was stained
the
darkest?
3. Is your cheek cell an animal cell?
Procedure: Part 3 - The Elodea leaf
Analysis:
1. Was anything happening in your cell?
2. What structures were in the plant and animal
cell?
3. What structures were only in the Elodea cell?
Conclusion: 2-3 sentences on what you learned.
YOU MUST CLEAN UP! ALL SLIDES ARE CLEANED
AND PUT AWAY.