Академический Документы
Профессиональный Документы
Культура Документы
TEMS Investigation
Preparing TEMS
Drive Test Introduction
What is Drive Test?
Drive testing is the most common and one of the best way to analyze Network performance by
means of coverage evaluation, system availability, network capacity, network retain-ability and call
quality.
Drive Test provides huge perspective to the service provider about whats happening with a
subscriber point of view (Downlink only)
It basically collecting measurement data with an equipment phone (TEMS, NEMO, Probe) such
as:
For 2G:
RXLEV, RXQUAL, FER, SQI, C/I, TA, C1, C2, 6 list of the strongest neighbor list,
And for 3G:
Scrambling Code (SC), UARFCN DL, CPICH Ec/No and CPICH RSCP, TxPower, UTRA
Carrier RSSI,
For this discussion session, we will talk about Drive Test using TEMS Investigation
TEMS Investigation
Preparing TEMS
TEMS Investigation
Workspace Area
Radio Parameters
Shows current radio information such as: RxLev, RxQual, FER,
BER, C/I, TA
Current Channel
Shows information for current channel being used: CGI, BSIC,
BCCH, Time Slot, Hopping Channel, MAIO
Preparing TEMS: Workspace (2G)
Presentation Information
C/A
Shows information of level interference from adjacent frequency
signal
C/I
Shows level ratio between information bits at signal carrier
signal and information bits at interference signal.
This happen because carrier and interference signal using the
same frequency
Line Chart
Shows current radio information such as: RxLev, RxQual, SQI,
FER, in graph (line/bar graph)
Preparing TEMS: Create Workspace (3G)
OR
Events
Shows all event that occurred during Drive Test.
It very useful to analyze important event such as:
Drop Call or Missing Intra-frequency Neighbors by
looking to this window
Preparing TEMS: Geoset Manager
Preparing Map Data: Geoset Manager
Geoset Manager
Change Font
Change Properties
Preparing TEMS: Map Window
Loading Geoset file to Map Window
It is same function
with Layer control Default Layer from
at Geoset manager TEMS
OR
Browse *.cel
Preparing TEMS: Map Window
Theme Settings: Coverage Layer
Coverage Layer
Event Layer
With this setting we can choose which event we want to show,
also we can customize the symbol which presented the event
Preparing TEMS: Map Window
Theme Settings: Cell Layer
Preparing TEMS: External Equipment
Connecting External Equipment
On the MS
Window,
Right click
then select
Properties
OR
Preparing TEMS: Mode Sequence
Command Sequence
Preparing TEMS: Play Log Files
Recording and Replaying Log Files
Start Recording
Stop Recording
Swap Logfiles
Save recording to a new logfile. To cut logfiles into some smaller log.
Output
Directory
Click
Finish
Preparing TEMS: Reporting
Report Generator
Preparing TEMS: Reporting
Area Statistic Tools