Академический Документы
Профессиональный Документы
Культура Документы
To validate
Divide by n
Feed system selection. Guidelines
Series layout of runner system
To verify laminar flow, the Reynolds number, Re, should be less than 2300
Estimate Pressure Drops
Power law
k the reference viscosity
n power law index of the polymer melt at the melt
temperature
Example
Example
Example
This pressure drop is significant but reasonable compared to typical injection pressures of 150
MPa
Sprue bushing dimensions
Runner block
Comparing round and trapezoid runner cross section
Typical runner cross section
Modified trapezoid runner sizes
Hydraulic diameter for different runner sections
Runner diameters for commun materials
Measuring runner length Increasing runner diameter by 20%