Академический Документы
Профессиональный Документы
Культура Документы
WELDING,
ASME SEC. IX
BRAZING, AND FUSING QUALIFICATIONS 2
ASME SEC. IX
2. PART QW (WELDING )
This section will guide and show you about
requirement for welding procedure. In this section is
contain 5 article :
• (article 1) : General Requirements Welding
• (article 2) : Procedure Qualifications
• (article 3) : Welding Performance Qualifications
• (article 4) : Welding Data
• (article 5) : Standart Welding Procedure
Spesifications
ASME SEC. IX
3. PART QB (BRAZING)
This section its same like QW section but in this
section is requiret about brazing process, its
contain 4 article:
• (article 11) : General requirements fo brazing
• (article 12) : Brazing procedure qualifications
• (article 13) : Brazing performance qualifications
• (article 14) : Brazing data
ASME SEC. IX
QW 110
This clause is contain permite in welding procedure, welder, and operator.
QW 120
This clause is regulated about groove joint (Figure QW 4.6.1) on the plate
and pipe specimen
QW 130
This clause is regulated about fillet joint (Figure QW 4.6.1) on the plate and
pipe specimen
PART QW
QW 140
In this clause is permitted about type and purpose of examination in welding
procedure. This clause id permitte mechanical test (QW 141), Welder and
operator examination (QW 142 & QW 143) and last is visual inspection (QW 143)
QW 150
Regulation about tension test also know tensile test. For the illustrated picture we
can se figure QW 462.1(a)
QW 160
Regulation about bending test
QW 170
Regulation about notch-toughness test also know impact test in ASTM standart
QW 180
Regulation about fillet weld test for PQR and WPQT
PART QW
THANK YOU