Вы находитесь на странице: 1из 7

CACAT PENGELASAN

Gereral Weld Discontinuities


Undercutting
Excessive melt-through
Incomplete fusion
Incomplete joint penetration
Porosity
Cracks
Slag inclusions
Distorsi

1
Dipakai di lingkungan sendiri
Incomplete Fusion - A weld discontinuity in which
fusion did not occur between weld metal and
fusion faces or adjoining weld beads

2
Dipakai di lingkungan sendiri
Undercut - A groove melted into the base metal adjacent to
the weld toe or weld root and left unfilled by weld metal.
Overlap - The protrusion of weld metal beyond the weld toe
or weld root

3
Dipakai di lingkungan sendiri
Partial joint penetration groove welds are
commonly specified in lowly loaded structures.
However, incomplete joint penetration when a full
penetration joint is required, as depicted above,
would be cause for rejection. A fix for an
incomplete penetration joint would be to back
gouge and weld from the other side. Another
acceptable partial penetration joint is shown below.

4
Dipakai di lingkungan sendiri
5
Dipakai di lingkungan sendiri
Distorsi

6
Dipakai di lingkungan sendiri
Welds Nomenclature

7
Dipakai di lingkungan sendiri

Вам также может понравиться